DB Engine :: Need DDL Trigger Before Server Instance Shutdown
Nov 24, 2015
I have SQL Server 2014 Enterprise Edition with a number of in-memory tables sitting in my database.When server is restarted it takes many hours to recover my database if there was data in these in-memory tables before shutdown.As a result, I need to clean up in-memory tables every time before server instance shutdown. This is really annoying and requires extra prescriptive actions for support team. Can I have DDL server/database level trigger to catch shutdown event and clean my data before instance goes down?
View 3 Replies
ADVERTISEMENT
Jul 20, 2005
I have a problem with an instance of SQL Server that refuses torespond to a shutdown request. I've managed to shutdown the SQLManager and DTC services but the sqlservr.exe process is permanentlyin a "Stopping" state.I cannot logon to the instance to issue a SHUTDOWN WITH NOWAITcommand. Short of rebooting the entire server, is there a way I canforce the process to end?Tony
View 3 Replies
View Related
Dec 9, 2014
I want to install SP2 for SQL 2012, but I am not sure how my instance would be affected.
I want to know if the instance will go down for any amount of time during the update? I can schedule a server reboot after hours, but don't want to apply the service pack if it will take the instance offline at any point.
View 2 Replies
View Related
May 12, 2015
I have an auto exec stored procedure that needs to complete successfully or:
- the server should shutdown, or
- disable remote connections
Officially I cannot issue a Shutdown from a Stored Procedure. In addition, I can't see how to programatically disable remote connections.
View 6 Replies
View Related
Jun 18, 2015
I have installed a default installation of a named instance of a 2008 R2 server and I want to restore a server from the main system and application files. I have a bak file for the latest master and model database and the four application databases and transaction log files. If I restore the master database in single - user mode I will get an error when I start-up the SQL service as the other databases are not attached to the SQL instance.
Is it restore databases and then master/model? best way to restore a SQL server environment?
View 10 Replies
View Related
Aug 6, 2015
Is there any query/script to find out if SQL Server 2012 instance is set to hidden or not instead of going to SQL Server configuring manager?
View 2 Replies
View Related
Oct 11, 2007
I recently installed SQL Server and Visual Studio. When I went into SQL Server, I could only connect to a SQL EXPRESS Database engine. I need to access the full Database. I tried disconnecting it, uninstalling/reinstalling. Now I cant connect to the SQL EXPRESS DB Object. There are no SQL Server services running.
Please help.
Thanks
View 8 Replies
View Related
May 8, 2013
We have 3x instances of SQL Server 2012 installed on a single remote server - there's the default MSSQLSERVER instance, then INSTANCE01 and INSTANCE02. I can remotely connect to the default MSSQLSERVER instance through SSMS, but I cannot connect to either of the additional named instances (INSTANCE01 or INSTANCE02).
For example, if I try to connect to "sql.domain.com", I can successfully access the default instance on the remote server. If I try to connect to "sql.domain.comINSTANCE01", I get an error stating
"A network-related or instance-specific error occurred while establishing a connection to SQL Server".
However - if I try to connect to "sql.domain.comINSTANCE01, 49301" (where 49301 is the TCP Port for the TCP/IP Protocol for this SQL Server instance), I am able to successfully connect.
This leads me to think that there's a communication issue with the SQL Server Browser service running on the remote SQL Server and my workstation.
The following items have been verified:
SQL Server Browser is running on the remote SQL ServerWindows Firewall has been disabled on the SQL ServerTCP Ports 1433, 1434, 1954, and 49301 have been opened up on the remote destination's firewallUDP Port 1434 has been opened up on the remote destination's firewall.
View 10 Replies
View Related
Jun 21, 2015
I have TWO named SQL Server instances (on the same machine) and I need to know the port of each of them, how can I do that? Is it write to check the following:
Which one to take: "TCP Dynamic Ports" or "TCP Port"? and what is the difference between them anyways?
Can the two instances (or more) on the same machine use the same port?!
View 12 Replies
View Related
Aug 6, 2015
I am new to SQL Server 2012 clustering.I added a new instance to one of the two nodes.when I try to move it to the other node it fails.Do I need to install it on both?If so, what options do you install on the second node?
View 7 Replies
View Related
Oct 27, 2015
connecting to a SQL Server Instance. I have a SQL server DB on a server having an Instance not running on the default port. Let's say ServerAInstanceA has the services exposed on Port 12345. When I'm trying to connect to ServerAInstanceA without specifying the port number, while I can connect from one client machine (ClientA), I am unable to connect from a different client machine (ClientB).On a side note, when I provide the port number, I can connect both from clients A and B. My question is, when I do not provide the port number, why is one client machine able to connect while the other isn't?
View 4 Replies
View Related
Apr 26, 2015
I've successfully created a Linked Server that connects a local DB Engine with another DB Engine through an ip over an extranet. I am able to run simple Select statement queries on the Local DB Engine and get results from the linked server. However when attempting to perform more complex queries that join tables from the linked server with tables from the local DB server, I get the following error message after several minutes of execution:
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Protocol error in TDS stream".
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Communication link failure".
Msg -1, Level 16, State 1, Line 0
Session Provider: Physical connection is not usable [xFFFFFFFF].
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Communication link failure".
Msg -1, Level 16, State 1, Line 0
Session Provider: Physical connection is not usable [xFFFFFFFF].
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
How I can resolve it. I've read on Distributed Transactions but I understand that it only applies to manipulation statements?
Both are SQL servers. Linked Server is SQL2008R2 if not mistaken. Local DB Engine is SQL2014.
View 3 Replies
View Related
May 10, 2015
I'm new to SQL. I have a scenario, Where customer want to move all the jobs from original SQL server to some remote SQL server and want to trigger jobs on remote server to do its work on original server.
View 4 Replies
View Related
Dec 11, 2006
Hello,
I installed SQL 2005 Standard on the same server (2K3) with SQL 2000. My named instance I installed is coming up with "Version 8.00.2039" in the Server Management Studio and will not let me restore a database back-up I made on a 2005 development workstation (I'm assuming it's because it's trying to use the 2000 engine instead of the 2005). Is there a way I can force this instance to use the 2005 engine rather than the 2000?
Thanks,
Steve
View 4 Replies
View Related
Aug 6, 2010
I have three instances running on my sql 2008 r2 enterprise.I have taken full backup of one database from default instance.I login both the instances thru sa account.Now when I try to restore that backup on another instance it gives me the following error....
TITLE: Microsoft SQL Server Management Studio
Restore failed for Server 'WRCP2F1CWS315TEJA'. (Microsoft.SqlServer.SmoExtended)
System.Data.SqlClient.SqlError: The operating system returned the error '32(The process cannot access the file because it is being used by another process.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:Program FilesMicrosoft SQL
ServerMSSQL10.MSSQLSERVERMSSQLDATAfcms.mdf'. (Microsoft.SqlServer.Smo)
what can be done to restore bakup in another instance ...
View 15 Replies
View Related
Jul 28, 2015
why we will go to install named instance as we having default instance already installed. Is there any advantage of named instance.
View 6 Replies
View Related
Feb 15, 2001
hi,
What is the right procedure for shutdown a production web sqlserver for maintenace purpose. Checking users by sp_who?
Any other monitoring for current connections? lockings?
thanks
ram
View 4 Replies
View Related
Feb 13, 2014
I am just trying to find a good article on the process SQL goes through when shutting down and starting up, so far I have not found anything definitive on Google. I am assuming a checkpoint is invoked and committed transactions are written to disk, while uncommitted are rolled back, but I would like an official textual description of what happens.
View 0 Replies
View Related
Feb 22, 2008
Currently i am using SQL server 2005. Since the begining i am facing sqlserver service shutdown problem. Normally it happens in every 2-3 days and sometimes happens twice a day. It halts all the banking operation. After starting MSSQL SERVER service, the system goes online.
Following is the error message recorded in the event viewer.
---------------
SQL Server is terminating because of fatal exception c0000005. This error may be caused by an unhandled Win32 or C++ exception, or by an access violation encountered during exception handling. Check the SQL error log for any related stack dumps or messages. This exception forces SQL Server to shutdown. To recover from this error, restart the server (unless SQLAgent is configured to auto restart).
---------------
Please tell me what steps i should take to resolve it.
Thanks
Umesh Raghubanshi
Kathmandu,Nepal
View 1 Replies
View Related
Jun 27, 2006
SQL Server 2005 X64 Standard running on Windows Server 2003 X64 Htper Threaded Quad processors with 16 GB RAM.
I have had two production servers shut down this week due to Error 3449: SQL Server must shut down in order to recover a database (database ID 1). The database is either a user database that could not be shut down or a system database. Restart SQL Server. If the database fails to recover after another startup, repair or restore the database.
Previous to the shutdown I received multiple Error 3314 & 602: Could not find an entry for table or index with partition ID 491897996509184 in database 2. This error can occur if a stored procedure references a dropped table, or metadata is corrupted. Drop and re-create the stored procedure, or execute DBCC CHECKDB.
Also, Error 9001: During undoing of a logged operation in database 'msdb', an error occurred at log record ID (838:208:1). Typically, the specific failure is logged previously as an error in the Windows Event Log service. Restore the database or file from a backup, or repair the database.
Does anyone have an idea why I have begun receiving these error messages? I have run dbcc checkdb on Master and msdb and they do not show any problems.
View 3 Replies
View Related
Jul 22, 2015
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamics FINANCE) using SQL authentication from local SSMS, I get below error message.A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
View 4 Replies
View Related
Oct 22, 2015
We are currently looking at consolidating 10 servers into one cluster server.
Some servers may be busier than others. Is there any reason to split them up and give the busy databases specific CPUs or is it always better to have them on one instance?
View 4 Replies
View Related
Jul 7, 2010
Since installing the client tools for SQL 08 R2 on my laptop, I am running into the following error when trying to open a step within a SQL job:
Microsoft SQL Server Management Studio
Creating an instance of the COM component with CLSID {AA40D1D6-CAEF-4A56-B9BB-D0D3DC976BA2} from the IClassFactory failed due to the following error: c001f011. (Microsoft.SqlServer.ManagedDTS)
ADDITIONAL INFORMATION:
Creating an instance of the COM component with CLSID {AA40D1D6-CAEF-4A56-B9BB-D0D3DC976BA2} from the IClassFactory failed due to the following error: c001f011. (Microsoft.SqlServer.ManagedDTS)
Is there a patch out for this?
View 8 Replies
View Related
Sep 3, 2015
I get "there was an unknown error applying the filestream settings("0x800710dc ") configuring my sql clustered instance with configuration manager. Not clear for me what I have to set for "Windows shared name".. Is it just an aliases or do I have to give the name of a shared disk ??
Get the same issue with SQL2012 and SQL2014..
View 4 Replies
View Related
Jun 25, 2014
I've a fresh installation of SQL Server 2014 Enterprise on Windows Server 2012R2. I've setup de Windows Server Failover Cluster and the validation test has been successfully passed. I use mountpoint so I've disk M: that is the host drive for mounted volume m:Isql2014A that is the base folder for mounted volume
On that folder I've 5 mountpoint:
1) m:isql2014a empdbdata
2) m:isql2014a empdblog
3) m:isql2014auserdata
4) m:isql2014auserlog
5) m:isql2014auserlog
into these 5 mountpoint I've placed the SQL Server files.
After the installation of the first FCI I've re-run the cluster validation wizard and again it has passed successfully. When I try to failover the instance from one node to the other I have 2 problem:
1) every time I do failover, some disks fail to come online for a while and then succeed :
Cluster resource 'CLD - IstA - TempDB Data' of type 'Physical Disk' in clustered role 'SQL Server (ISQL2014A)' failed. The error code was '0xaa' ('The requested resource is in use.').
2) sometimes the SQL Server service fails to start, in the error log I see that the master database is not accessible. The master database in into the m:isql2014abinbackup.
View 7 Replies
View Related
Jun 9, 2015
We have a 2 servers with 2 default instances,
Environment- SQL server 2012 SP2 | Windows Server 2008 R2
1server:
hostname-serverA , Instance-serverA and port-2040 Ip-192.164.1.1
2server:
hostname-serverB , Instance-serverB and port-2040 Ip-192.164.1.2
If i do a SSMS connection-the possible connections strings which can be used to connect to Instance "serverB" should be,
a.serverBserverB
b.serverB,2040
c.192.164.1.2,2040
Note: but even the connection string "serverBserverA,2040" also connects to Instance "serverB", when i try to connect from SSMS, In SSMS it shows the wrong instance name like, "serverBserverB", but it actually connects to Instance "serverA"
i.what is the reason behind this?
ii.Is there any way to avoid this connection, by performing server property changes, if any ?
View 5 Replies
View Related
Apr 23, 2015
One server, a part of a 2 node always on cluster, had problems, I had to restart.
I'm getting this error for example now:
Error: 49910, Severity: 10, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
+
SQL Server was unable to run a new system task, either because there is insufficient memory or the number of configured sessions exceeds the maximum allowed in the server. Verify that the server has adequate memory. Use sp_configure with option 'user connections' to check the maximum number of user connections allowed. Use sys.dm_exec_sessions to check the current number of sessions, including user processes.
Now, on the instance I have activated maximum servere memory, my question; Is it possible to adjust this setting without starting the service?
Some parameter for example?
The server itself have enough memory.
View 3 Replies
View Related
May 5, 2008
Hi,
I'm from Argentina, I'm running SQL Server 2005 Express. I can connect to SQL Server via Management Studio and see all my db but I don't have acces to them !!
The system gives me the following error when trying to expand all folders:
Database 4 cannot be autostarted during server shutdown or startup. (Microsoft SQL Server, Error: 904)
Any ideas??
Thanks from Argentina
View 3 Replies
View Related
Aug 13, 2015
In our production we have a database by name MyDb.The application team wanted another database by the name MyDbOld which contains the data of Mydb 1 month old. So I created a database MyDbOld in other instance(test) and restored MyDbOld from the one month backup of MyDb in production server. In test instance I backed MyDbOld as MyDbOld.bak...
In the production instance I created a new DB by the name MyDbOld and restored the MyDbOld in the production from the backup of MyDbold.bak in the test instance. Now I have 2 databases in the production instance ie MyDb and 2)MyDbOld. However I find the logical names of both the databases to be the same although the database name and the physical file name to be different.My questions are-:
1) Does it in any manner affect the integrity of the 2 databases if the 2 databases are in the same instance and have the same logical name?
2) Would the dml or data retrieval operations in the 2 databases have any conflict in any manner what so ever?
3) Having a unique database name, and unique file names for the physical files for any database in an instance what is the purpose and significance of additionally having a logical name for a database?
4) Which I could restore a database from the backup of another database in the same instance and at the same time change the logical and physical name of the files to correspond to the new database.
View 3 Replies
View Related
Sep 24, 2015
I have Configured always on Availability groups between Server 1 Primary Replica(Active), server 2 Secondary Replica(Passive) on top of WCFS...
Listener Name: AGListner( CLIENTS/APPLICATIONS connect using this Name)
Testing Scenario 1(on Virtual Servers):
I have turned network down on Server 1(primary) , then secondary server (Passive ) one came ONLINE and this is now the primary and i was able to connect to AGListner.now When i try to SHUTDOWN/POWER OFF PRIMARY(current Active server),failover happened to Secondary successfully but lost cluster and lost AGListner and was not able to connect ....now applications which are trying to connect using AGListenr name will loose all connections..does AlwaysOn Availability does not support Server SHUTDOWN/POWER OFF?or is there a way to resolve this? or am i doing wrong somewhere?
View 2 Replies
View Related
Sep 28, 2015
I create a job name test connection by SQL AGent
Background:
- Have server1 and server2
- The job has 3 steps:
+ Step1: check server1 is running, next step2
Server1 is shutdown or can not ping, next step3
+ Step2: do anything, for Example: run batch exe on server1
+ Step3: do anything, for Example: run batch exe on server2
Step1, i am using ping server1 command,
My problem is if server1 is shutdown, my command (ping server1) is also return true
and in the fact, job is run by follow Step1 -> Step2.
Expectation the job is run by follow step1 -> Step3
View 5 Replies
View Related
May 12, 2015
I tried to call a exe from sql server through trigger with xp_cmdshell, But its not working as expected, shows preemptive_os_pipeops in process under the activity monitor and the process got hang.
View 18 Replies
View Related
Oct 22, 2015
I am looking to create a server wide trigger which will fire whenever a database gets created, I would like to know if there are any gotchas or anything that I need to look out for/test specifically.
The idea is to automatically grant some permissions and take some other actions whenever a database gets created.
View 6 Replies
View Related
