DB Engine :: Receive Backup Failed For Server
Oct 6, 2015
I have a VM with Windows Server 2012 and SQL 2014 installed. Some things about the VM: Using VMware Workstation 11. Created with 160 GB hard disk and 4G memory (that's all we could do when needing to run multiple VMs from the box we're using). I am able to get to the internet and to our network but the internet connection tells me that there is no internet access and we can't seem to fix it.When I attempt to create a backup of one of my DBs, I receive the attached error. No other backup has been created for this particular DB so it would not need to overwrite anything. This is an issue for all of the DBs that are in the SQL Server and not just an isolated DB.
We ran DBCC CHECKDB against the DB and no errors were returned.A bit about the DBs: Our software creates a number of empty DBs upon install. For testing purposes we have DBs that are populated with data that we restore once the install is complete. So our procedure is, once all services are shut down for our software and the SQL connection has been cut, we delete the DBs created during install and restore the DBs that will replace them. All of the DBs restored successfully so I don't understand why there would be an issue with backing them up.
View 8 Replies
ADVERTISEMENT
Jul 1, 2015
I have a database size of 9.8TB and I backup it to 30 backup devices. Each one has 110GB after backup compression.I tried to restore these files to standby server via 100MbE network but it always failed. My colleague told me this never happen before and I said yes because I have done this before a lot of times when backup devices are significantly smaller.He said the only way is to copy backup files locally and restore locally. But I am trying another method, I create more: 64(maximum) backup devices and try to restore via network again.SQL server version is Microsoft SQL Server 2012 (SP1)
- 11.0.3401.0 (X64) Jan 9 2014 13:22:15 Copyright (c) Microsoft Corporation
Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.1 <X64> (Build 7601:
Service Pack 1) .
--- error message ---
5 percent processed.
10 percent processed.
15 percent processed.
[code]....
RESTORE DATABASE is terminating abnormally.
View 11 Replies
View Related
Oct 6, 2015
When I execute the following transaction log backup TSQL in SSMS
BACKUP LOG ProductDB
TO DISK = 'D:Database_BackupTransProductDB.trn';
I get this error:
Msg 3201, Level 16, State 1, Line 2
Cannot open backup device 'D:Database_BackupTransProductDB.trn'. Operating system error 21(The device is not ready.).
Msg 3013, Level 16, State 1, Line 2
BACKUP LOG is terminating abnormally.
I also have a daily database backup job that puts the backup file under this directory.
D:Database_BackupData
So I changed the path to this and it still fails.
BACKUP LOG ProductDB
TO DISK = 'D:Database_BackupDataProductDB.trn';
However if I change it to this path, it works:
BACKUP LOG ProductDB
TO DISK = 'MyServerDataProductDB.trn';
This turns out to be the path I used a few weeks back when I backed up the log for the very first time. But I now wanted to store my transaction log backups in D:Database_BackupTrans.
View 10 Replies
View Related
May 12, 2015
i have a sql server job scheduled to run daily twice.the job is running fine , but once or twice a week the job fails saying."Message Unable to connect to SQL Server '(local)'. The step failed." all other times the job runs successfully. it randomly the job is failing. once its failed and if i try to run it manually it runs fine or it will start running fine from next schedule onwards.This job mainly executes a stored procedure.the owner of the job is setup as sa. i don't understand why its fail randomly and all other times(90% of cases) it successful."Unable to connect to SQL Server '(local)'. The step failed."
View 2 Replies
View Related
Nov 21, 2015
I am restoring a backup of sql server 2005 which I inherited on to sql server 2012 and is in a recovery pending state and the reason why is, this is a backup from a different domain and does not have the logins from the legacy domain, looks like its some access issue as its not being able to find the necessary login on sql server 2012.
View 4 Replies
View Related
Jul 8, 2015
I am working on a project for an SQL job. I am:
1.) Taking a database out of an availability group,
2.) Setting the recovery to simple,
3.) Shrinking the log file,
4.) Setting the recovery mode back to full,
5.) Then backing it up.
I need to restore the file to my secondary server with replace and non recovery mode. I am having trouble performing that call? I have the code to reestablish the database to the availability group if I can get the restore feature working.
View 11 Replies
View Related
Nov 12, 2015
I am trying to make my maintenance plan to backup on a remote server but it fails with:
"failed with the following error: "xp_delete_file() returned error 2".
I am pretty sure its because it doesnt have full access to the share folder... My question is, how can I grant access to it, if I am using a local account as sql agent service: NT ServiceSQLSERVERAGENT.I need to change the service account?
View 13 Replies
View Related
Sep 15, 2015
How to move the database backup files (.bak) from one server to another server using ‘XP_CMDSHELL’
View 2 Replies
View Related
May 20, 2015
I have last 5 years data in my database(SQL server).
I want to take backup only last 1 year(last 365 days) data using SQL script.
View 6 Replies
View Related
Sep 8, 2015
I got full backup on daily schedule its taking more space on Drive because each file has more than 25GB.I am using SLQ server 2008R2 so I'm looking to take the backup with compression instead of uncompressed Backup. What are the impacts of compressed backup. Is there any problems with compressed backup while restoring the backup file.
View 8 Replies
View Related
Dec 28, 2006
Hi,
I was trying to restore some databases from one SQL Server to another SQL server on another machine. When i backed up them i followed the procedure described on the MSDN website.
Now when tried to restore them on to a new machine on another instance of SQL Server i got the following error. I really dont know what it means. The error is:
"Device activation error. The physical file name 'C:Program FilesMicrosoft SQL ServerMSSQL$SOPHOSDataeRoom_eRoomSite.mdf' may be incorrect.
File eRoom_eRoomSite cannot be restored to 'C:Program FilesMicrosoft SQL ServerMSSQL$SOPHOSDataeRoom_eRoomSite.mdf'. Use WITH MOVE to identify a valid location for the file.
Device activation error. The physical file name 'C:Program FilesMicrosoft SQL ServerMSSQL$SOPHOSDataeRoom_eRoomSite_log.ldf' may be incorrect.
File eRoom_eRoomSite cannot be restored to 'C:Program FilesMicrosoft SQL ServerMSSQL$SOPHOSDataeRoom_eRoomSite_log.ldf'. Use WITH MOVE to identify a valid location for the file.
RESTORE DATABASE is terminating abnormally."
Now from the file location i can see that it has got the location of database where it was belong but question is why it is storing the old path here on the backup file. On the path "MSSQL$SOPHOS" is the instance of the SQL Server from where it was backed up. According to the Administrator's pocketbook on the microsoft web site we can restore a database on a completely new machine, then why is this error. Can anyone please help me.
Thanks very much.
View 1 Replies
View Related
Jul 21, 2015
We backup the database using the following method
1. launch the DacIESvcCli.exe at specified time, which in-turn calls the service (southeast asia).
2. the bacpac is created and uploaded to the specified storage
However, after upgrading the Server to V12, it failed to create bacpac file in the storage, there are no errors/no logs/no information.
View 4 Replies
View Related
Aug 23, 2013
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
View 9 Replies
View Related
Feb 9, 2004
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
View 2 Replies
View Related
Jul 11, 2007
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
View 11 Replies
View Related
Aug 4, 2007
Backup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 Replies
View Related
Mar 14, 2007
SP2 failed for database engine.
Following is the error:
EventType : sqlsesetup P1 : do_sqlgroupmember P2 : 0x7348
P3 : do_sqlgroupmember P4 : 0x7348 P5 : sqlca_sqlsecurityca.cpp@1132
P6 : unknown P7 : sql9 P8 : hotfix@ P9 : x86 P10 : 3042
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29512
Error Description : MSP Error: 29512 SQL Server Setup was unable add user NT AUTHORITYSYSTEM to local group DCCIBERSQLServer2005SQLAgentUser$DCSQL01$MSSQLSERVER.
any help appreciated...
View 2 Replies
View Related
Feb 22, 2007
I have a clean SQL 2005 Ent. x64 SP1 clean with no user db's.....applied SP2 and everything showed "Success" except the Database Services (Error 29534)......
Time: 02/22/2007 08:29:50.134
KB Number: KB921896
Machine: TORCA8
OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 1 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x64
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Setup Support Files ENU 9.1.2047 x64
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x64 ENTERPRISE
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x64 ENTERPRISE
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x64 ENTERPRISE
Notification Services ENU SP1 9.00.2047.00 x64 ENTERPRISE
Integration Services ENU SP1 9.00.2047.00 x64 ENTERPRISE
SQL Server Native Client ENU 9.00.2047.00 x64
Client Components ENU SP1 9.1.2047 x64 ENTERPRISE
MSXML 6.0 Parser ENU 6.00.3890.0 x64
SQLXML4 ENU 9.00.2047.00 x64
Backward Compatibility ENU 8.05.1704 x64
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x64
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29534
Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (1067) The process terminated unexpectedly.
----------------------------------------------------------------------------------
Product : Analysis Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixOLAP9_Hotfix_KB921896_sqlrun_as.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Reporting Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRS9_Hotfix_KB921896_sqlrun_rs.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Notification Services
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixNS9_Hotfix_KB921896_sqlrun_ns.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixDTS9_Hotfix_KB921896_sqlrun_dts.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlncli.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 3890
Product Version (Final) : 6.10.1129.0
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_msxml6.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlxml4.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 1704
Product Version (Final) : 2004
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SQLServer2005_BC.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlWriter.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29534
Now SQL Server service won't restart.....
2007-02-22 10:16:31.28 Server Microsoft SQL Server 2005 - 9.00.3042.00 (X64)
Feb 10 2007 00:59:02
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-02-22 10:16:31.28 Server (c) 2005 Microsoft Corporation.
2007-02-22 10:16:31.28 Server All rights reserved.
2007-02-22 10:16:31.28 Server Server process ID is 2056.
2007-02-22 10:16:31.28 Server Authentication mode is MIXED.
2007-02-22 10:16:31.28 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-02-22 10:16:31.28 Server This instance of SQL Server last reported using a process ID of 576 at 2/22/2007 10:16:15 AM (local) 2/22/2007 3:16:15 PM (UTC). This is an informational message only; no user action is required.
2007-02-22 10:16:31.28 Server Registry startup parameters:
2007-02-22 10:16:31.28 Server -d E:SQLDatamaster.mdf
2007-02-22 10:16:31.28 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-02-22 10:16:31.28 Server -l F:SQLLogsmastlog.ldf
2007-02-22 10:16:31.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-02-22 10:16:31.28 Server Detected 4 CPUs. This is an informational message; no user action is required.
2007-02-22 10:16:31.28 Server Cannot use Large Page Extensions: lock memory privilege was not granted.
2007-02-22 10:16:31.40 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-02-22 10:16:31.42 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-02-22 10:16:31.50 spid1s A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 0 seconds. Working set (KB): 36200, committed (KB): 104760, memory utilization: 34%.
2007-02-22 10:16:33.45 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-02-22 10:16:33.45 Server Database mirroring has been enabled on this instance of SQL Server.
2007-02-22 10:16:33.47 spid5s Starting up database 'master'.
2007-02-22 10:16:33.47 spid5s SQL Trace ID 1 was started by login "sa".
2007-02-22 10:16:33.48 spid5s Starting up database 'mssqlsystemresource'.
2007-02-22 10:16:33.48 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-02-22 10:16:33.48 spid5s Error: 5173, Severity: 16, State: 1.
2007-02-22 10:16:33.48 spid5s One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
2007-02-22 10:16:33.48 spid5s Error: 5173, Severity: 16, State: 1.
2007-02-22 10:16:33.48 spid5s One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
2007-02-22 10:16:33.48 spid5s Log file 'F:SQLLogsmssqlsystemresource.ldf' does not match the primary file. It may be from a different database or the log may have been rebuilt previously.
2007-02-22 10:16:33.48 spid5s The log cannot be rebuilt when the primary file is read-only.
2007-02-22 10:16:33.48 spid5s Error: 945, Severity: 14, State: 2.
2007-02-22 10:16:33.48 spid5s Database 'mssqlsystemresource' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2007-02-22 10:16:33.48 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Tried reinstalling SP 2 in quiet mode using sapwd parameter.....now everything is showing the correct SP2 version but SQL Server Service won't start.......anyone????????
View 14 Replies
View Related
Jun 9, 2015
Recently one of our DB went to suspect mode, we have resolved it(repair_allow_dataloss) and DB came online but when we fire CheckDB on that it is throwing following error
Msg 7985, Level 16, State 2, Line 2
System table pre-checks: Object ID 3. Could not read and latch page (1:355) with latch type SH. Check statement terminated due to unrepairable error.
DBCC results for 'xxxxxxx'.
Msg 5233, Level 16, State 98, Line 2
Table error: alloc unit ID 196608, page (1:355). The test (IS_OFF (BUF_IOERR, pBUF->bstat)) failed. The values are 12716041 and -4.
CHECKDB found 0 allocation errors and 1 consistency errors not associated with any single object.
CHECKDB found 0 allocation errors and 1 consistency errors in database 'xxxxxxx'.
And error log is also continuously popping the below message
Error:
824,
Severity: 24,
State: 2.
SQL
Server detected a logical consistency-based
I/O
[code]....
View 7 Replies
View Related
May 6, 2015
I am just new in SQL 2012 r2 and we are trying to provision one SQL VM but we are getting an error a"Login failed for user. "Error 18456" when trying to login to the Database Engine for the 1st time via SQL Management Studio. URL...
2015-05-06 12:44:49.57 Logon Error: 18456, Severity: 14, State: 5.
2015-05-06 12:44:49.57 Logon Login failed for user 'SDAdmin'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
[code]...
View 3 Replies
View Related
Aug 5, 2015
We got an error "Failed Virtual Allocate Bytes: FAIL_VIRTUAL_RESERVE"
Microsoft SQL Server 2005 - 9.00.5000.00 (Intel X86)
Dec 10 2010 10:56:29
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
We had 24CPU intell cores and 64 gb RAM on server.
Sql service starts with enabled AWE + LPM and "-g512" option.
Why we still use such relic configuration it is not my fault. i'm investigate log and find that memorystatus "Optimization Queue" section has really huge values.
Optimization Queue
Overall Memory = 1321132032Target Memory = 1158799360 Last Notification = GROW Timeout = 6 Early Termination Factor = 5Small Gateway Configured Units = 32 Available Units = 26 Acquires = 6 Waiters = 0 Threshold Factor = 250000 Threshold = 250000Medium Gateway Configured Units = 8 Available Units = 7 Acquires = 1 Waiters = 0 Threshold Factor = 12 Threshold = 16094435Big Gateway Configured Units = 1 Available Units = 1 Acquires = 0 Waiters = 0 Threshold Factor = 8 Threshold = 144849920
[code]...
What forced bPOOL to allocate pages in MTL? How to determine that queries? Same about SQL OS.As workaround i increase -g startup option to "-g2048", and "max server memory" was decreased to 54Gb.
View 10 Replies
View Related
Mar 18, 2007
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29534
Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall
PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007
<Func Name='ComponentUpgradeInstall'>
<Func Name='ComponentUpgrade'>
Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling
Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007
Failed to start service MSSQLSERVER. Error code 2148081668
Service failed unexpectedly (2148081668)
Error Code: -2146885628
Windows Error Text: Cannot find object or property.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls::Service::Start
Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation.
2007-03-18 19:46:11.51 Server All rights reserved.
2007-03-18 19:46:11.53 Server Server process ID is 796.
2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY.
2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required.
2007-03-18 19:46:11.53 Server Registry startup parameters:
2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server.
2007-03-18 19:46:14.07 spid5s Starting up database 'master'.
2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa".
2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'.
2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid9s Starting up database 'model'.
2007-03-18 19:46:15.06 spid9s Clearing tempdb database.
2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'.
2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured.
2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured.
2007-03-18 19:46:15.82 spid12s Service Broker manager has started.
2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1.
2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1.
2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3.
2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Any advice???
View 14 Replies
View Related
Jun 24, 2015
I have a logon trigger on a SQL Server 2008 R2 Express Advanced production database to prevent remote logons. The trigger works fine. When I need to connect via my local machine, remotely, I connect via a VPN, can connect with SSMS and do whatever I need. However, if I use a linked server on my local machine (still connected via VPN), I receive the logon error
Msg 17892, Level 14, State 1, Line 1
Logon failed for login 'sa' due to trigger execution.
The trigger is below and it logs any failures, except for the linked server.
If I disable the trigger, the linked server connects ok.
CREATE TRIGGER [tr_MasterLogon]
ON ALL SERVER WITH EXECUTE AS 'sa'
FOR LOGON
AS
BEGIN
DECLARE
@ClientAddress varchar(48) = (SELECT client_net_address
[Code] ....
View 5 Replies
View Related
Nov 22, 2010
I have a SQl2k8 R2 up and running on a win2k8 R2, I have a domain controller as well with AD 2k8 R2. It works fine but from time to time I receive a dozen of successive alerts like th folowing
DATE/TIME:
11/22/2010 12:19:57 PM
DESCRIPTION: SSPI handshake failed with error code 0x80090311, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.
COMMENT:
(None)
JOB RUN:
(None)
I understand from some threads here that it is an issue related to contacting the AD. In event viewer it is not clear what is casuing this. I have WSS databases, Biztalk server databases.....and some other user databases. NO home made applications contact sql server.
What is the best route to follow to see who is not being able sometimes and why contacting the AD. I read the thread at URL.... but it is related to express 2005 and it does not apply to my case.
View 4 Replies
View Related
Dec 17, 2007
Hi all,
I got an error when i use crystal reports to open a report of a database in a web application.
I use the server as Oracle 10g.
The error is as follows.:
Logon failed. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[LogOnException: Logon failed.]
.F(String , EngineExceptionErrorID
) +506
.A(Int16 , Int32 ) +537
CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext) +468
CrystalDecisions.CrystalReports.Engine.FormatEngine.Export() +107
CrystalDecisions.CrystalReports.Engine.ReportDocument.Export() +67
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
What is this error?
How do i correct it?
Thank you
View 3 Replies
View Related
Aug 6, 2010
I have three instances running on my sql 2008 r2 enterprise.I have taken full backup of one database from default instance.I login both the instances thru sa account.Now when I try to restore that backup on another instance it gives me the following error....
TITLE: Microsoft SQL Server Management Studio
Restore failed for Server 'WRCP2F1CWS315TEJA'. (Microsoft.SqlServer.SmoExtended)
System.Data.SqlClient.SqlError: The operating system returned the error '32(The process cannot access the file because it is being used by another process.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:Program FilesMicrosoft SQL
ServerMSSQL10.MSSQLSERVERMSSQLDATAfcms.mdf'. (Microsoft.SqlServer.Smo)
what can be done to restore bakup in another instance ...
View 15 Replies
View Related
Oct 15, 2015
In one off my production box, we are notable to take a backups of MSDB . When i look at the error, it is failing locate allocation unit ID.. complete error as below
Msg 2533,Sev 16,State 1, Line 36 : Table error : Page (1:111720 ) allocated to object id 110623437, index ID 1, Partition ID 72057594043432960, alloc unit ID 72057594044874752 (type-inrow data) was not seen. This page is invalid or may have an incorrect alloc unit ID in its header.[SQLSTATE 42000]
Due this failure, we are unable to take the backup of MSDB database and our integrity check and reindex jobs also failured with the same.Also, I could see events of I/O issues with underlaying hard dirve with following name
DeviceHarddisk0DR0,has a bad block.
1. I dont no what could happen if restart my server, Question is: Does it recognize MSDB during server statup.
View 9 Replies
View Related
Mar 26, 2013
I can't install the SQL Server 2012 Express version with tools downloaded from [URL]
I'm getting the following error:
Error installing SQL Server Database Engine Services Instance Features
Could not find the Database Engine startup handle.
Error code: 0x851A0019
I'm trying to install a new stand-alone version with a default instance but always getting this error. From the features I'm installing the database engine services (not the replication), all the tools, only the basic management toolds and the SQL Client connectivity SDK.
Further in the installation I'm choosing the Windows authentication and in the list of SQL administrators I've already tried to install as current user but also as System. Both with the same error result.
[URL]
Note: Visual studio is not installed.
View 8 Replies
View Related
Apr 6, 2015
I have a procedure that works fine from SSMS but sometimes fails when running via SQL Agent. The SP sends emails..Here is the error message "Failed to initialize sqlcmd library with error number -2147467259"
<p>Javier Villegas | <a href="http://www.twitter.com/javier_vill" target="_blank" title="Twitter" rel="nofollow"> @javier_vill</a> | <a href="http://sql-javier-villegas.blogspot.com/"
rel="nofollow">http://sql-javier-villegas.blogspot.com/</a></p>.
View 3 Replies
View Related
May 8, 2015
We have server with Sql2008 R2 RTM 64 bit standard edition.We installed 2012 sp1 64 bit standard edition in win2012sp1 64 bit as side by side setup.After installation, i found the below error when i opened SSCM:
Remote Procedure Call Failed:
I fixed this error by renaming the MSC file.
At event log i am observing continuously below error:
Source: Application Error Event ID: 1000
Faulting application name: wmiprvse.exe, version: 6.3.9600.16384, time stamp: 0x5532e9c9
Faulting module name: svrenumapi100.dll, version: 2009.100.1600.1, time stamp: 0x4bb681be
Exception code: 0xc0000005
Fault offset: 0x00000000000514e6
Faulting process id: 0x17e8
Faulting application start time: 0x01d0873d9d37c382
Faulting application path: C:Windowssystem32wbemwmiprvse.exe
Faulting module path: C:Program FilesMicrosoft SQL Server100Sharedsvrenumapi100.dll
Report Id: afe88c1-330-11e4-80c4-008786656bda
Faulting package full name:
Faulting package-relative application
is there any other way to get rid of this error without installing a SP1 or later on sql 2008 R2 RTM version.
View 7 Replies
View Related
Jul 14, 2015
I am trying to take backup on network folder but I am getting below error:
Msg 3201, Level 16, State 1, Line 9
Cannot open backup device 'xyz.xy.z.xyabcdexyxyzarchive_2015_7_14_11_14_58.Diff'. Operating system error 1326(Logon failure: unknown user name or bad password.).
Msg 3013, Level 16, State 1, Line 9
BACKUP DATABASE is terminating abnormally.
NOTE:- The folder abcde is protected by password , When I try to open the xyz.xy.z.xy, I provide password to connect.
I am using the below script :
DECLARE @filename VARCHAR(255)
SELECT @filename ='xyz.xy.z.xyabcdexyxyzarchive_' +
LTRIM(STR(DATEPART(year, GETDATE()))) + '_' +
LTRIM(STR(DATEPART(month, GETDATE()))) + '_' +
[Code] ...
How to troubleshoot / resolve this error permanently?
View 8 Replies
View Related
Jun 26, 2015
I am using alwayson on my SQL 2012 databases. I am using ola hallengren scripts for backing up databases. Full & diff db backups work fine, but the log is not getting backed up. The tran log backup job doesn't error out too. Trying to figure out what I may be missing?
View 10 Replies
View Related
Oct 22, 2015
Is it possible to backup/restore sql server databases in a logical way like oracle(exp/imp, expdp,impdp, can export/import tables/users etc)?my case, I have a database which has many data files, in different file groups, I would like to put them together into one file and don't want to shred the database.
View 6 Replies
View Related
