DB Engine :: System Database Files Location

May 16, 2015

I have C,D,E drives on server. Data files will be on D and Log on E. My question is what is best practice for data and log files for system databases during sql server installation selection? Should they be on C drive along with SQL Server installation or D & E? If they should not be on C then what is the reason and what is benefit to move them on other drives.

View 9 Replies


ADVERTISEMENT

DB Engine :: Database Default Location Is Not Showing System Drive

Oct 30, 2015

In SQL Server 2012 Instance properties ,database default location is not showing system drive E: which was my backup drive. How can I add it again?

View 8 Replies View Related

Move Mdf Files For System Databases To Another Location

Mar 18, 2008



Hello there,
I've been told that it is good practice to keep mdf and ldf files in another location... We have it in place for all our user databases, however mdf and ldf files for our system dbs are still at the same location. I was wondering what is the right way of splitting those should be?

View 5 Replies View Related

SQL Security :: Server Won't Start After Mistyped System Database Names When Moving Them To New Location

Apr 24, 2015

I'm using SQL Server 2012 and was attempting to move the msdb, model, and tempdb databases to a new location and accidentally gave their log files an mdf extension instead of ldf when providing the new pathfilename.  After the server wouldn't start I checked my script and noticed my error.  I have good backups of my system databases, so I was hoping to start the MSSQLSERVER service in single-user mode (using the -m startup parameter) and then just restore master using sqlcmd. 

Unfortunately the service was starting but I couldn't connect via sqlcmd using any of the three protocols (it said the server was not found or not accessible each time).  I also tried using the dedicated Admin connection but I got the same error.  Then I went into the Templates folder and copied the master, msdb, model, and tempdb templates into the DATA folder and tried to restart SQL Server but still no luck (now the MSSQLSERVER service won't start at all).  Is there an easy way to fix this mess without having to reinstall from the setup application?

View 8 Replies View Related

Post SP2-Hotfixes Fails To Install Database Services On Clustered Servers With System Dbs On Non-default Location

Jan 9, 2008

Hi,

We've had this issue for awhile, but I have not been able to find a resolution for this. We have 2 identical servers (hardware & software) set-up: IBM x3850-(88633RU) running Windows Server 2003 Enterprise x64 (5.2.3790 SP1 Build 3790 R2). Server A was running SP1 (Build 9.0.2047) on a 3-node active-passive-passive failover cluster. Server B was running SP2 + Hotfix KB933097 (Build 9.0.3152) on a 2-node active-passive failover cluster. Both these servers are heavily utilized, and when originally installed with these versions of SQL Server Enterprise 2005 experienced no issues during or post-install. The original install of SQL 2005 Enterprise on both these servers had the Cluster Group Selection "Data files" setting changed to "M:MICROSOFT SQL SERVER" so that all system dbs and binaries would be installed to that location. On Server B where SP2 had already been applied, the update was downloaded on May 1, 2007, well after the GDR issues which had been plaguing SP2 releases was supposed to have been resolved.

Our problems began the night when we tried to apply hotfix KB933097 on Server A, and cumulative update packages 1,2,3 on Servers A & B, as well as catch-up the same SP2 and hotfix packages on other non-clustered servers where default system db locations remained the same. On all servers other than Servers A and B, the installs proceeded smoothly and without issue.

On Server B, which was already running SP2 + Hotfix KB933097, we tried installing Cumulative Update Package 1 (Build 9.0.3161) on the primary node. The install proceeded until the following errors were encountered:

"[Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_resource_semaphores', because it does not exist or you do not have permission."

"[Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_memory_grants', because it does not exist or you do not have permission."

After this, the setup finished with the message "Product: Microsoft SQL Server 2005 (64-bit) - Update 'Hotfix 3161 for SQL Server Database Services 2005 (64-bit) ENU (KB935356)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB935356_sqlrun_sql.msp.log."

We rebooted the server and tried several times to reinstall the hotfix as sa and as the database service account with full windows and sa credentials, each time with no success, and rebooting between retries. All other components were installed successfully. We were hesitant to try uninstalling the hotfix, since it was unable to be removed successfully in previous attempts. However, when I connected to Database Engine using Management Studio, I found that the version of SQL being reported was in fact Build 9.0.3161! Everything also appeared to be running properly.

I tried to to Google the answer, but could only find information as applied to SP1 when system dbs master and mssqlsystemresource were located on different locations (http://support.microsoft.com/default.aspx?scid=kb;EN-US;918695 ). I had already verified that all system dbs, including the ones mentioned, were originally and currently located together on M:Microsoft SQL ServerMSSQL.1MSSQLData.


Finally I contacted a fellow DBA who advised me to continue installing all the other hotfixes, and then compare all SQL files against other servers where the install succeeded to ensure all system files were updated correctly (matching file sizes and datetime stamps). Since we were depending on a fix in Cumulative Update Package 3 to fix a critical log-shipping security issue, I went ahead with the rest of the installs, getting the same error with each package, rebooting between each install.

We found after the final install that the mssqlsystemresource files in the M:Microsoft SQL ServerMSSQL.1MSSQLData

directory were in fact updated after each install with a new timestamp, and that all files in C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn matched on both file size and timestamp. The log-shipping security issue we were looking to fix also appeared to be resolved by the last update.

On Server A, which was running SP1 (Build 9.0.2047), we installed the same SP2 package as we had on Server B with no issue. We rebooted and then tried to apply the same Hotfix KB933097 (Build 9.0.3152) that had been applied successfully on Server B and found to our surprise that the same errors were being generated here as well. We continued to apply the rest of the hotfixes so that both servers matched software updates. Comparing the above directories showed that files seemed to have been updated, even though database services appeared to be not installed.

It looks like we now need Cumulative Update 5 hotfix package in order to deal with WMI alerting issues, but I'm afraid to apply it until we have a known resolution for the past errors.


Since this issue was supposed to be resolved by SP2, I'm not sure why these post-SP2 hotfixes should fail. It seems to me to be an issue of the directory location of the system files which is in question.

I can post the hotfix log files as well, if anyone is interested in seeing them.

Any help would be greatly appreciated. As well, does anyone have any idea when SP3 is scheduled to come out? I really don't like applying hotfixes which are usually untested for general purposes, and it seems Microsoft is delaying this in favour of releasing SQL 2008.

View 6 Replies View Related

DB Engine :: Database Files Shrinking

Jul 6, 2015

I have dataware house database and it's size is 2 TB with simple recovery model.I want to reduce it's size because everyday before loading table gets truncate.Is it best practice to shrink the datafiles?database having 5 data files and one log file.what is the best way to reduce?

View 7 Replies View Related

How Can We Modify The Files Path For The Database In Database Engine?

May 14, 2007

Hi, all experts here,

Thank you very much for your kind attention.

I am trying to modify the files path (primary file, log file) of databases, but it looks like I am not able to mofidy their files path directly from the database property dialogue? Would please any experts here give me some ideas on what else can I try to figure it out? Thanks a lot in advance and I am looking forward to hearing from you shortly.

With best regards,

Yours sincerely,

View 5 Replies View Related

Can Multiple Workstations Running SQL 2005 Server Express Attach To The Same Database Files On A Shared Network Location?

Mar 15, 2007

Can multiple instances of SQL 2005 Express attach to the same database files on a network share? I have seen this done before with MSDE where the database files are stored on the server, but instead of having a SQL server running on the network and then connecting to it, only the database files exist on the network share and the users connect through MSDE running on the local machine. Is this possible with SQL2005Express? I do not have the ability to share an SQL instance from one workstation to another nor do I have the ability to install an instance on the corporate server. Is it as simple as creating the database and storing the files on the share then attaching the database to the SQL Instance on each workstation?

View 3 Replies View Related

DB Engine :: Moving Database Backup Files From One Server To Another?

Sep 15, 2015

How to move the database backup files (.bak) from one server to another server using ‘XP_CMDSHELL’

View 2 Replies View Related

Moving System Database Files

Sep 19, 2002

Is this possible? If so, how is it done?

View 1 Replies View Related

SQL 2012 :: Opening Files Result In Connect To Database Engine Prompt?

Feb 24, 2014

When opening .sql files, I get a connect to database engine prompt every single time. how to stop this from prompting vs. just using my current active connection?

View 4 Replies View Related

DB Engine :: How To Change Error Log Location

Nov 30, 2006

I have been trying to change the location of the SQL 2005 error log. It's logging to the default location at

C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOG

I want to move the log location to the E drive because it can get quite large. I already changed the setting in the SQL Server Error and Usage config tool, but this did not seem to make a difference.

View 5 Replies View Related

DB Engine :: Migrating Clustered Server From One Location To Another

Oct 16, 2015

We currently have two virtual machines running on Windows Server 2003 together with SQL 2005. These servers are in a cluster and are using multiple physcial RAW disk mappings from shared storage (SAN) for their shared disks within a VMware ESXi 5.1 cluster.I need migrate these SQL servers over to new infrastructure, in a new physical location. I tried using VMware converter to import the active member server in the SQL cluster, but I am receiving VSS errors when running the conversion. I can see that shadow copy is disabled on all the disks on the server.

View 3 Replies View Related

DB Engine :: How To Change Location Of Secondary Data File

Nov 9, 2015

I added a secondary data file to TEMPdb yesterday and gave it a wrong location by mistake. If I try to change the location, then I am getting an error now. I think that is because TEMPdb is in use and that is why I cant change it's secondary file's location. Do I need to take TempDB offline and then change the secondary file's location??

View 3 Replies View Related

System DB's Location

Oct 2, 2007

I have an installation of SQL2005 SP1 configured as follows:

Dell Poweredge 2650 with 4 GB RAM
c:, d: and e: are all on the local host and f: and g: drives are on a SAN. I have the system db's on the e: local disk and the Team Foundation Server databases and logfiles on the SAN disks. SQL2005 is installed to the E: disk.

We are migrating VSS to TFS and our times are very long for a simple 1 GB migration.

I need to know if I need the application databases and logfiles and system databases on the same disk because I see a lot of disk thrash and the tempdb is getting large, 3 GB today.

SQL architecture - should the system db's be on the same disk as the application db's?

Thanks

View 1 Replies View Related

Location Of .MDF And .LDF Files

Mar 27, 2007

Does anyone know where a good article pertaining to where you should locate your Data and Log files (in SQL Server 2005)?
I read an article several years ago stating that Log files should be on a seperate RAID 1 and Data on a seperate RAID 5.
Anyway, any help is appreciated.

View 1 Replies View Related

How To Separate Data's And Log's Files Location.

Sep 26, 2000

Hi everybody,

On the time of installation SQL Server asking me where I wont to locate the DATA files and the PROGRAM files. It’s giving to me choice to put database AND log files on one disk and program files on separate. But what about to separate LOG and DATA files. I have RAID1 especially created on F: drive for LOG files and RAID 5 on E: for DATABASE files. When I have to separate that if not on the time of installation? How I can do that?

Thanks,
Miriam

View 3 Replies View Related

Change Location Of Template Files

Aug 8, 2006

In SQL2000, there's an option to change the location of the template folder. This allows me to create a customized set of templates on a network folder and have all the developers reference the centralized location. Can the same be done in SQL2005 and how would I go about doing so?

Thanks.

View 1 Replies View Related

Copy Folders And Files To Different Location

May 15, 2007



I have a situation from where I need to loop through different folders and files in these folders. After processing these files, I need to archive these folders to different location.



e.g., C:MainFolderMar01 ==> Multiple files in Mar01 folder

C:MainFolderMar02 ==> Multiple files in Mar02 folder



Does any one know the best way to do this in SSIS?



Thanks in advance.



BC

View 1 Replies View Related

Data Files Path Not Location

Jan 28, 2008



Hi All,

Can plz any one help me, acutally as i know sys.files table gives you the acutally physical location of the database fiels with name as well like this

C:sqldatax.mdf

but what i m looking is, is there any qury or script that will give me only the path of the data,log, index files like this

C:sqldata

Thanks and looking forward.

-MALIK

View 5 Replies View Related

Transact SQL :: Move Files From One Location To Another Using Powershell

Jul 12, 2015

I have a job which copies .txt files 24 hours 7 days a week to c:TempSource

What I am planning to do is copy the files from one location to another say c:TempTarget

So I have written the Powell shell script and when i put that in the sql agent job i get below error ;

A job step received an error at line 5 in a PowerShell script. The corresponding line is '$filesToMove = $files | Where -Property "Name" -NotLike -Value $newestFile.Name'. Correct the script and reschedule the job. The error information returned by PowerShell is: 'A parameter cannot be found that matches parameter name 'Property'. '. Process Exit Code -1. The step failed.

$sourceFiles = "c:TempSource*.txt"
$targetFolder = "c:TempTarget"
$files = Get-ChildItem $sourceFiles
$newestFile = ($files | sort LastWriteTime -Descending)[0]
$filesToMove = $files | Where -Property "Name" -NotLike -Value $newestFile.Name
$filesToMove | ForEach { Move-Item $_ $targetFolder } 

View 12 Replies View Related

SQL 2012 :: SSIS To Load Files From Two SFTP Location

May 18, 2015

How to load files with similar format , from two different locations into same database with same ssis.

Lets say
Location 1: C:LoadFilesCust1APP_123445.txt
Location 2: D:LoadFilescust2VDD_543121.txt

Currently we have one ssis which loads and process files from C:LoadFilesCust1 only. we have to modify the existing package it to load files from Location 2 (D:LoadFilescust2) as well. Also while loading, the ssis should assign a value to existing column CustID depending upon the file name. File names always start with APP_ in first location. VDD_ in second location

Assign CUSTID as 100 if file name starts with APP_
Assign CUSTID as 200if file name starts with VDD_

View 1 Replies View Related

Location Of Default Instance SQL Server 2005 Files

Dec 21, 2005

I have just installed SQL Server 2005.  I was not given a choice during installation (that I remember seeing anyway) about which drive I wanted to place the default SQL instance on.

It ended up on C: and I needed it on D:.

 

So my questions are:

Is there a way to move it to D: that is easier than the way you had to go about it in SQL 2000?
Is there a way to do it during setup so I can avoid this in the future?

View 7 Replies View Related

Processing Last Created/modified Files From A Location Using SSIS Package

Mar 12, 2008

We have a scenario to process last created/modified files from a location using SSIS package , eventhough the folder contains multiple files with same name and extension.

Kindly give respond to this if any one has worked on this.

Regards,
Sajesh

View 7 Replies View Related

Copying Files From A Sharepoint Location To Local Machine Using SSIS

Apr 20, 2007

I have to copy files from a sharepoint or extranet location (basically https://.....) location to my local server using SSIS.



Any kind of early help would be really great.

View 1 Replies View Related

SQL Server 2008 :: Find Date Created And Modified Values Of All Files In A Location

Jun 11, 2015

Script to find the details of creation date and modified date of all files located in a path?

I wanna write few custom messages before I delete some files from a path.

View 9 Replies View Related

DB Engine :: TempDB Full On New System

Sep 9, 2015

Application is throwing errors.Is there anyway to fix this with out restarting the server on a newly migrated system?

View 9 Replies View Related

Integration Services :: Copy CSV Files From One Location To Archive Folder Need To Rename With Current Date

Jun 4, 2015

I have Developed ETL Package Which Supplying the CSV File, if I run the package Next time if Same File name  is there I need to Rename the that File with Currentdatetime need to move in to Archive Folder. if that File is not exist in that location no need to move the file into Archive file.

View 4 Replies View Related

DB Engine :: Do System Base Tables Always Use Clustered Index

Nov 4, 2015

Just wonder if system base tables always use clustered index? I am using SQL Server 2005 and find sys.sysidxstats base table is using heap, not clustered index. Why?

View 2 Replies View Related

DB Engine :: Start Or Call System AUTO-SHRINK Process?

Jul 23, 2015

Is it possible to manually force/call/start the system AUTOSHRINK process? I have an issue that appears only when the engine shrinking process is running and I need this to reproduce my bug.

I know how to start a "regular" database shrink process with:DBCC SHRINKDATABASE(xxxx);, but this is not the same as one started from the database engine.

View 13 Replies View Related

DB Engine :: Auto Adding New Files?

Jul 2, 2015

I use management studio on the sql server. Each time i want to run scripts over new data, i have to delete the old files in a database and import new ones (from csv files to .dbo). These are the same files everytime except that the data change. Is it possible to make an automated proces for this import?

View 2 Replies View Related

DB Engine :: Error - Failed To Connect To IPC Port - System Cannot Find File Specified

Jun 2, 2008

In Management Studio i highlight my query and then click on 'Analyse query in Database Engine Advisor' but i get the following error message: "Failed to connect to an IPC Port: The system cannot find the file specified".  Seems like if I reboot my computer it works one time then get the same error on the second time.I'm running developer edition with service pack 2.

View 8 Replies View Related

DB Engine :: Insufficient System Memory In Resource Pool Default To Run Query

Jul 7, 2015

My Integrity job started failing recently with the following error. Msg 701, Level 17, State 123, Line 1  There is insufficient system memory in resource pool 'default' to run this query.  Process Exit Code 1.  The step failed.

select @@ version
Microsoft SQL Server 2008 R2 (SP2) - 10.50.4033.0 (X64)
 Jul  9 2014 16:04:25
 Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
System is having 4GB RAM and SQL is using most of it. It has 2 processors.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved