SQL server 2012, I tried to start Audit log from SSMS, I received following error.
Enable failed for audit error 33222, for more information see sql Server error log .
query ss.dm_os_ring_buffers
I have 4 servers, 2 each for application (Dev & Prod)
DEV 1 & DEV 2 are standalone servers
Prod 1 & Prod 2 are Windows Clustered Servers.
From one application to other we do Distributed transactions. Dev 1 - Dev 2 or Dev 2 - Dev 1 can start DTC and working fine,but issue comes when Prod 1 - Prod 2 or Prod 2 - Prod 1. I get error message OLE DB provider "SQLNCLI" for linked server "xyz" returned message "No transaction is active.".
Msg 7391, Level 16, State 2, Line 3
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "xyz" was unable to begin a distributed transaction.
I have tested Dev 1 - Prod 1, Dev 1 - Prod 2, Dev 2 - Prod 1, Dev 2 - Prod 2 everything is working fine only Production servers are causing issue.
I enabled all settings needed for DTC on Cluster MSDTC service but no luck.
Hi,
Could anyone assist me with this issue, nothing has changed on the server except trying to restore a db from another sql server to the one with the error (SQL01 to SQL02)
SQL02 Server does not startup, i get this error:
Cannot start C2 audit trace. SQL Server is shutting down. Error = 0x80070003(The system cannot find the path specified.)
Then I try to apply the -f parameter on service start up, and i get this error:
Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
Could anyone please advise me on some solution?
Much appriciated
Gino
I have a windows 2012 server and will like to know how to audit DMLs on a table (delete, truncate, update) on this table, I want to see all T-Sql DML statement carried out on this table in a file.How can this be achieved using if possible something already built into SSMS.
View 4 Replies View RelatedHow can I take backup of Database Audit Specification ?
View 3 Replies View RelatedI just installed sql server 2014 on a second pc I will be using to vpn into our parent company's domain. When I use explorer to look at file system folders on servers in the parent domain on which I have permissions, I am prompted correctly for my windows creds in their domain which are different from the creds in my originating domain and I can see those files. But when I open ssms and try to connect using server name or ip address, I see two problems....
1) ssms is using my originating domain creds without giving me the opportunity to change them
2) whether I use a server name or ip address I get an error saying login from an untrusted domain cannot be used with windows auth 18452.
How can i Trace Database Audit specification Enable and Disable. i want to maintain log for enable or disable database audit specification.
View 4 Replies View RelatedIs there any possibility to override database audit specification file. suppose i want to change some logs forcefully . is it possible ?
View 5 Replies View RelatedI am currently re-writing an overnight index defrag procedure and would like to audit indexes in my database - logging the before defrag action" avg fragmentation value and "after defrag action" frag value in an audit table. This will be for all databases on the server. I have completed the vast majority of it (cycling though all the databases, detecting which indexes need reorganising or rebuilding and inserting the information into a table) but I cannot get the audit values working properly. For example, a sample row in my audit table would look like this:
ID Name DB Table frag_before frag_after
1 Index2 DB1 Table6 70.33456 0.03
2 Index7 DB1 Table9 45.98 1.2567etc
Has experienced this error when trying to open SSMS? Was working fine earlier. I have tried uninstall/reinstall, a few reboots,repairing the install, etc.
View 5 Replies View RelatedSQL2008R2...Have a SPID that started yesterday and contained a command to drop a server audit. This did not finish (after 3hrs) so I killed the SPID. Problem is it's still there (sp_who2) and I think it's now blocking access to viewing editing logins within SSMS as I'm getting "Lock request time out period exceeded. (Microsoft SQL Server, Error: 1222)" when double clicking a login.Do I need to restart the instance as killing the "alter server" transaction (SPID=62) is not working? Code to show blocking transactions returns this.
View 12 Replies View RelatedI've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamics FINANCE) using SQL authentication from local SSMS, I get below error message.A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
View 4 Replies View RelatedWe have a 2 servers with 2 default instances,
Environment- SQL server 2012 SP2 | Windows Server 2008 R2
1server:
hostname-serverA , Instance-serverA and port-2040 Ip-192.164.1.1
2server:
hostname-serverB , Instance-serverB and port-2040 Ip-192.164.1.2
If i do a SSMS connection-the possible connections strings which can be used to connect to Instance "serverB" should be,
a.serverBserverB
b.serverB,2040
c.192.164.1.2,2040
Note: but even the connection string "serverBserverA,2040" also connects to Instance "serverB", when i try to connect from SSMS, In SSMS it shows the wrong instance name like, "serverBserverB", but it actually connects to Instance "serverA"
i.what is the reason behind this?
ii.Is there any way to avoid this connection, by performing server property changes, if any ?
connecting to a SQL Server Instance. I have a SQL server DB on a server having an Instance not running on the default port. Let's say ServerAInstanceA has the services exposed on Port 12345. When I'm trying to connect to ServerAInstanceA without specifying the port number, while I can connect from one client machine (ClientA), I am unable to connect from a different client machine (ClientB).On a side note, when I provide the port number, I can connect both from clients A and B. My question is, when I do not provide the port number, why is one client machine able to connect while the other isn't?
View 4 Replies View RelatedHi,
In a nutshell I'm unable to connect to SSRS within SSMS yet I can connect to SSIS, SSAS and the Database Engine within SSMS from the same named server instance ("BOODEMO")
"SQL Server 2005 Surface Area Configuration" reports that service status SSRS (DEMO) is running.
The only other problem that I have found which may be linked is that within "Reporting Services Configuration Manager BOODEMO" there is a red circled crossed next to "Report Manager Virtual Directory", yet this application has just recently reported that I successfully created a virtual directory.
Any help or constructive guidance would be greatly appreciated.
Thanks in advance,
Kieran.
I don't know if this is the correct forum, but I am hoping someone can help. I asked the question in the beginners forum but was able to get it resolved. If someone can help, please do,
Using the SSMS Import and Export Wizard, I am trying to export tables from one database into another within the same sql server instance but am getting the error message below. I tried exporting one table; still doesn't work. I copied the wizard generated CREATE TABLE sql statement and ran it in a query in SSMS without incident. I looked up ResultSet property in BOL but there is no entry for it; just ResultSets and ResultSetType. How does one set ResultSet? I have frequently exported to text files without this problem. Can anybody help resolve this?
- Execute the transfer with the TransferProvider. (Error)
Messages
ERROR : errorCode=-1073548784 description=Executing the query "" failed with the following error: "Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040153.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
helpFile= helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
ERROR : errorCode=-1073548784 description=Executing the query "" failed with the following error: "Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040153.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
helpFile= helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} (Microsoft.SqlServer.DtsTransferProvider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
I have two queries yielding the same result that I wanted to compare for performance. I did enter both queries in one Mangement Studio query window and execute them as one batch with the actual query plan included.Query 1 took 8.2 seconds to complete and the query plan said that the cost was 21% of the batchQuery 2 took 2.3 seconds to complete and the query plan said that the cost was 79% of the batch.The queries were run on my local development machine. I was the only user. No other programs were running at the time of this test. The results are repeatable.I understand that the query with the lowest cost is not necessarily the fastest query. On the other hand, the difference is quite big. The query that has approx. 80% of the cost takes 20% of the time and the other way around. I have two questions:
Is such a discrepancy normal?Can conclusions be drawn from the cost distribution? For instance, does the query that takes 8.2 seconds but only costs 21% scale better?
Why I am not able to start the Analysis Services Engine again as the error message from event viewer as:
Event Type: Error
Event Source: MSSQLServerOLAPService
Event Category: (289)
Event ID: 0
Date: 04/07/2007
Time: 10:45:48
User: N/A
Computer: computer_name
Description:
The service cannot be started: Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. The following system error occurred: The filename, directory name, or volume label syntax is incorrect. . File system error: Error occurred during the creation of directory: '\?'.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
On SQL Server, when I start the Analysis services, the error message is : The SQL Server Analysis Services (MSSQLSERVER) service on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the performance logs and Alerts service.
Why is that? That is really frustrated and please any of you give me any advices or help on it. Thanks a lot in advance.
With best regards,
Yours sincerely,
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29534
Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall
PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007
<Func Name='ComponentUpgradeInstall'>
<Func Name='ComponentUpgrade'>
Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling
Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007
Failed to start service MSSQLSERVER. Error code 2148081668
Service failed unexpectedly (2148081668)
Error Code: -2146885628
Windows Error Text: Cannot find object or property.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls::Service::Start
Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation.
2007-03-18 19:46:11.51 Server All rights reserved.
2007-03-18 19:46:11.53 Server Server process ID is 796.
2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY.
2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required.
2007-03-18 19:46:11.53 Server Registry startup parameters:
2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server.
2007-03-18 19:46:14.07 spid5s Starting up database 'master'.
2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa".
2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'.
2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid9s Starting up database 'model'.
2007-03-18 19:46:15.06 spid9s Clearing tempdb database.
2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'.
2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured.
2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured.
2007-03-18 19:46:15.82 spid12s Service Broker manager has started.
2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1.
2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1.
2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3.
2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Any advice???
Dear All,
I am not able to start the sql server 2005 database engine services...
Sql server 2005 server is installed in one machine(SERVER) and we have 10 client machine connecting to the server
When i try to start the service from the Service.msc in the SERVER i am getting the following error
===================================
Cannot connect to KEYSKILL.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
------------------------------
Error Number: 2
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Could any one help me to resolve the error
Thanks in Advance
Lalitha
We have an issue where servers goes slow from morning 2 AM EST to 10 AM EST.
Using SP_WhoIsActive we somehow found that there is netbackup from Symantec which runs during that time phrase.
As per Symantec team there backup should get over by 5 AM EST, per their testing for almost 100 Dbs on the server( not big in size , all of them in total would be 60 GB).
Using SP_whoisactive we only see, start time of that virtual backup occurring on tape, for one database at time.
So is there a way we actually determine when does the above backup kicks and stops?Also, could SQL server be the problem in making these backups run slow or there is something else i need to monitor?
I am unable to start SQL service on my system after i rebooted it
following is the message that i get
SQL Service on Local Computer started and then stopped. Some service stop automatically if they have no work to do
following is the corresponding entry in event viewer
TDSSNIClient initialization failed with error 0x7e, status code 0x60.
Hi
I have downloaded and installed the trial version of MS Visual Studio 2005 Team System. The installation was successful. However, I am not able to start SQLEXPRESS using the SQL Server Configuration Manager. It shows me SQLEXPRESS but when I right click and select Start it tries to start the service and after some time gives the following error
"The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details."
The event log shows the following errors:
1. FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2. FCB::Open failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf for file number 2. OS error: 5(Access is denied.).
I tried enabling remote connections but still got the same error.
Please help.
Regards
Rajat
My Server service will not start, i get a message saing consult the logs, in the error logs it says error in the model db .ldf file. However, i can not connect to the server to restore from my back ups. I get the error msg, your server may not be configured to accept remote connection. No, i dont know what im doing and my only though is to start from scratch reinstalling the server. Any help is apreciated.
View 6 Replies View RelatedIs it possible to manually force/call/start the system AUTOSHRINK process? I have an issue that appears only when the engine shrinking process is running and I need this to reproduce my bug.
I know how to start a "regular" database shrink process with:DBCC SHRINKDATABASE(xxxx);, but this is not the same as one started from the database engine.
we had activity last night we need to truncate Transactional Logs we pressed Restart button to initiate service , but it stopped successfully and failed to start the SQL Server service.We did not find anything find anything unusual in log file. Please confirm are we facing any bug or needing any fixes to installed on the server.Windows Server 2008 R2 Standard Service Pack 1 ( 64bit)
View 6 Replies View RelatedI need to start SQL Server Agent so that I can run scheduled jobs. I am running SQL Server 7.0 with windows NT 4.0 service pack 4. When I try to start the agent I get the following error
Error 22003: StartService() returned error 5,'Access is denied'
Does anyone have an idea as to why this is happening?
Any help with this problem would be appreciated.
Thanks
Phil
Message logged in the SQL Server is
Failed to report the current event. Operating
system error = 31(A device attached to the system is not functioning.).
The OS has been Shutdown and Restarted again but I am not able to start the SQL Server thereafter.
Kindly Suggest
Hi,
I get this error message each time i try to run the vb application in visual studio .net environment.
--------------------------------------------------------------------------------
"Unable to start SQL debug session. Ensure sqldbreg2.exe and proxy/stub DLL sqldbg.dll are registered on this machine"
-------------------------------------------------------------------------------
I am running visual studio and sql server 2000 on the same machine. I have given permission to sqldebugger user to access the system32 folder and sql debugging folder. This error message is followed by
-------------------------------------------------------------------------------
Attaching the T Sql debugger to process[proj1.exe] on machine 'my machine name' failed Error code 0x80004004
------------------------------------------------------------------------------
I am running MS SQL Server 2000 on windows 2000 adv server.
what can be done to remove this error. Thaks in advance
Sivaraj.
Hi Gurus,
I have installed MS analysis service(OLAP) on my lap top
my user is in the Administrative group , other than that I tried creating a user with 'OLAP ADMINISTRATOR' privilate and tried to start the ms analysis service
I am getting the error , unable to start the service on server(), you are not a member of OLAP Administrators group
I tried to install the service pack 3 from Microsoft
Could you pleae guide me to start this serivice
Thanks,
As my sql agent is not starting due to XP's are disabled . when I ran the sp_configure with override and changed to 0 to 1 when I am starting the agent the configured value will be back to again 0 and in logs.Waiting for SQL Server to recover database 'msdb'...ODBC Error: 0, Invalid character value for cast specification [SQLSTATE 22018]
View 1 Replies View RelatedHi all
When i started the service, i am getting the following message
Starting up database 'master'.
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed
i don't have any backups for master database
is there any way i can restore it from .mdf, .ldf files..
Pls suggest..
Thanks in advance
I have a client server application and it is running in the following configuration: SERVER A: MS Server2003 with MS SQL2000, Our ERP application software is installed on this server as is MS SQL200.
Server B: is our e-commerce server and it is running MS Windows2000 server OS and no MS SQL. The e-commerce application is pointed to the active SQL server on server A. I am trying to run a software version upgrade on on software application (which was successfully run on server A) When we try to run this upgrade on server B we get a message: " Setup is unable to start MS SQL Server Services, please start and try again"
I do not understand what is going on with this. SQL & SQL Service Agent is running on Server A. Any suggestions as to what I need to do?
www.accellus.com