DB Engine :: Error - Failed To Connect To IPC Port - System Cannot Find File Specified
Jun 2, 2008
In Management Studio i highlight my query and then click on 'Analyse query in Database Engine Advisor' but i get the following error message: "Failed to connect to an IPC Port: The system cannot find the file specified". Seems like if I reboot my computer it works one time then get the same error on the second time.I'm running developer edition with service pack 2.
View 8 Replies
ADVERTISEMENT
Jan 31, 2007
Hi,
I use the DTS 2000 Migration Wizard to migrate one of the DTS 2000 packages to SSIS. The migration failed with the following error message:
LogID=17
#Time=6:31 PM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
---> System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)
Looking at the call stack, it looks like COM wrapper fails on SaveToXML. Can someone tell me how I should workaround this problem?
Thanks,
Bobby Fu
View 1 Replies
View Related
Apr 16, 2008
I am trying to attach a database to SQL 2005. This database has not previously been attached. I have only just installed SQL.
Â
I get the following message: Unable to open physical file "C:ArrowSQLArr@DataArrow_data.mdf" Operating system error 5: "5(error not found)" (Microsoft SQL Server: Error 5120)".
Â
I have loaded SQL and the database fiel and directory with the same user account which is a local administrator on this machine. I have checked that I have read/write access to the file.
Â
The machine runs Windows Vista Business. SQL has SP 2 loaded. What causes this?
View 56 Replies
View Related
May 27, 2008
Hi,
I have a SQL Server Agent job set up to run a job that calls a dts package on the server.
When I run the DTS Package manually, everything works fine and does what it is supposed to do.
When I run the job, The job fails. If somebody had this error can you please help me out
I am getting following error in my job...
DTSRun: Loading...Error: -2147287038 (80030002);
Provider Error: 0 (0)
Error string: The system cannot find the file specified. Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts.hlp
Help context: 713.
Process Exit Code 1. The step failed.
could you please let me know what is the possible cause for the above error.
Many Thanks,
Madhu
View 1 Replies
View Related
Mar 8, 2007
Hi,
I have a package which calls another package. It had been working fine for a while. Recently I changed the connection managers' names. Everything in the parent package works fine. Database has been updated correctly. But when it comes to calling the child package it generates :
OnError,CRPRCHMSQCZ,,Execute AMSClientAgentMaintenance,,,3/8/2007 5:49:38 PM,3/8/2007 5:49:38 PM,-1073602332,0x,Error 0x80070002 while preparing to load the package. The system cannot find the file specified.
. (there is a period here instead of a file name)
I tested the child package on the server. It works fine. I connected the child package to the Execute Package Task by selecting from the packages on the server. So it is there for sure. Connection manager's name is read from the .dtsConfig. Child package is executed from my development machine but not on the server. I made a small test package just to call this child package, it generates the same error...
Any help is appreciated
Gulden
View 6 Replies
View Related
Jan 16, 2008
I know there are already several bug submissions on this error, and I am sure the cryptoAPI team is working to resolve this issue.. However... Is it possible that the CAPICOM update (KB931906) could have contributed to this issue? In my instance, I installed SQLServer 2005 Express w/ Adv Tools SP2 after a freash XP install. I checked it out, and everything worked fine. I updated windows (online) and now it gives this error. In fact, I cannot even run the un-install because the setup utility also hits the following error (as taken from the log file):
Microsoft SQL Server 2005 Setup beginning at Wed Jan 16 12:47:35 2008
Process ID : 576
d:97352a1d146f8bca5542016500a05210setup.exe Version: 2005.90.3042.0
Running: LoadResourcesAction at: 2008/0/16 12:47:35
Complete: LoadResourcesAction at: 2008/0/16 12:47:35, returned true
Running: ParseBootstrapOptionsAction at: 2008/0/16 12:47:35
Loaded DLL:97352a1d146f8bca5542016500a05210xmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2008/0/16 12:47:35, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Wed Jun 14 16:28:04 2006
Function Name: sqls::CryptSameUserSameMachine:rotectData
Source Line Number: 50
2
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "576"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2008/0/16 12:47:35
Complete: ValidateWinNTAction at: 2008/0/16 12:47:35, returned true
Running: ValidateMinOSAction at: 2008/0/16 12:47:35
Complete: ValidateMinOSAction at: 2008/0/16 12:47:35, returned true
Running: PerformSCCAction at: 2008/0/16 12:47:35
Complete: PerformSCCAction at: 2008/0/16 12:47:35, returned true
Running: ActivateLoggingAction at: 2008/0/16 12:47:35
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
00E2CFC0Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Failed to create CAB file due to datastore exception
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "576"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 2
Since the Microsoft.SqlServer.Express.SQLEditors utilizes a crypto wrapper, givin the error above... would the CAPICOM update have affected things?
Brian Nichols
View 1 Replies
View Related
May 13, 2004
Windows 2000 Server SP4 + SQL Server 2000 Enterprise Editon SP3,RAID5.
the windows event log give the following error information:
I/O error 2(The system cannot find the file specified) detected during write at offset 0x0000010c6c4000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdataGJSZBANK_Data.MDF'.
I have searched microsoft knowledge base and got this article:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;828339
but don't understand some contents in the topic:
For example, if you encounter the following error message in the SQL Server Errorlog file, SQL Server encountered operating system error 2 when it uses a Windows API call to write to the tempdb primary database file:
Error: 823, Severity: 24, State: 4
I/O error 2(The system cannot find the file specified.) detected during write at offset 0x00000000284000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdata empdb.mdf'
Because SQL Server has already successfully opened the file and did not receive an “Invalid Handle” error, the error is likely being raised in a lower-level kernel software component, such as the file system or a device driver. This problem does not indicate a problem in SQL Server, and it must be investigated as an issue with the file system or a device driver that is associated with the file.
Does that mean this is not a SQL Server error?
Does that mean something wrong with my operating system? or something wrong with my hard disk?
View 1 Replies
View Related
May 12, 2015
i have a sql server job scheduled to run daily twice.the job is running fine , but once  or twice a week the job fails saying."Message Unable to connect to SQL Server '(local)'.  The step failed." all other times the job runs successfully. it randomly the job is failing. once its failed and if i try to run it manually it runs fine or it will start running fine from next schedule onwards.This job mainly executes a stored procedure.the owner of the job is setup as sa. i don't understand why its fail randomly and all other times(90% of cases) it successful."Unable to connect to SQL Server '(local)'.  The step failed."
View 2 Replies
View Related
Jul 20, 2005
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies
View Related
Nov 15, 2001
When I try to open a DTS package I get the message above. These packages were written by other developers.
Other packages on this server state that the Parameter is incorrect when I try to open them.
Any ideas?
Jim
View 2 Replies
View Related
Oct 31, 2007
Hello,
I have a package that copies data FROM an MS Access database table to a SQL Server 2005 table. 'Run64BitRunTime' has been set to 'False'. The package has been saved to SQL Server. I have a Job that runs the package using an operating system command. The following is the command syntax:
€œC:Program Files (x86)Microsoft SQL Server90DTSBinndtexec.exe€? /SQL "RebatesRebates_TotalSecurity" /SERVER bwdbfin1 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
I created the package on a machine other than bwdbfin1. I can run the package from Visual Studio. I can run the package from Integration Services. I have sysAdmin rights on bwdbfin1. I've tried running the job using two different proxy accounts and the sql agent account. I have the location of the Access database. No matter what I do, the Job fails with the following error:
The process could not be created for step 1 of job 0xD947EF76ACD96340B12279FEDDC580CE (reason: The system cannot find the file specified). The step failed.
I have an identical package that copies data TO an Access database. The database addressed in that package and this package are in the same location. The 'CreatorName' of both packages is the same. I have logging enabled for every category, but nothing is written to the sysdtslog90 table when the Job runs. I set up error output in the DataFlow task, and have also tried to 'ignore' errors. I have searched the forum, done a web search, and I can't find a reason for the failure.
Is dtexec the file that is not found? If that were the case, then why can a Job run my other package?
Any ideas?
Thank you for your help!
cdun2
View 4 Replies
View Related
Mar 20, 2001
I am running SQL 7.0 with Access 97 as a front end. I am having a problem linking one of the tables with an odbc connection. When I try to link the table, it gives me the error :
"The database engine can't find <name of table>. Make sure it is a valid parameter or alias name, that it doesn't include invalid characters or punctuation, and that the name isn't too long."
I have tried renaming the table, and it then will allow the connection, but if I rename it back to the original name, it doesn't work again. The table name is "Invoice_Line_Item". Changing the name permanently is not an option.
Has anyone else run across this problem, or know of a fix for it.
View 1 Replies
View Related
Dec 12, 2007
I finally got SQL Server 2005 installed on my Vista Ultimate computer and now I can't connect in SQL Server Management Studio.
I've got a named instance; use the built-in system account; windows authentication mode. I try to connect to
Server type: Database Engine
Server name: RAYWOERNER-PCRAYWOERNER
Authentication: Windows Authentication
and it fails. Please help.
Thanks,
Ray
Here are the technical details:
===================================
Cannot connect to RAYWOERNER-PCRAYWOERNER.
===================================
Login failed for user 'RayWoerner-PCRay'. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
------------------------------
Server Name: RAYWOERNER-PCRAYWOERNER
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
View 3 Replies
View Related
Nov 22, 2010
I have a SQl2k8 R2 up and running on a win2k8 R2, I have a domain controller as well with AD 2k8 R2. It works fine but from time to time I receive a dozen of successive alerts like th folowing
DATE/TIME:Â Â Â Â Â Â
11/22/2010 12:19:57 PM
Â
DESCRIPTION:Â SSPI handshake failed with error code 0x80090311, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.Â
Â
COMMENT:Â Â Â Â Â Â
(None)
JOB RUN:Â Â Â Â Â Â Â Â Â Â Â
(None)
I understand from some threads here that it is an issue related to contacting the AD. In event viewer it is not clear what is casuing this. I have WSS databases, Biztalk server databases.....and some other user databases. NO home made applications contact sql server.
Â
What is the best route to follow to see who is not being able sometimes and why contacting the AD. I read the thread at URL.... but it is related to express 2005 and it does not apply to my case.
View 4 Replies
View Related
Dec 28, 2005
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
View 2 Replies
View Related
May 5, 2006
Installed SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:
Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.
1. What could be wrong?
2. How do I fix it?
View 9 Replies
View Related
Jan 17, 2013
I have been searching for a means to change the System Failure Error Check policy that comes as part of the Best Practice policies. I want to look back 24 hours. The WQL query shipped with the policy doesn't have a WHERE clause component that looks at TimeGenerated. That query looks like:
IsNull(ExecuteWql('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System"'), 0)
After searching for an example of how to do this and not finding any that are specific to PBM, I decided to fall back to a very basic approach - use wbemtest.exe to try out where clause additions and see how they work, then plug the result into the policy and see if it works. As a start, I tried the following query using wbemtest.exe:
select Event Code
from Win32_NTLogEvent
where EventCode = 6008
and Logfile = 'System'
and TimeGenerated > '20130101010000.000000–000'
This works great in wbemtest.exe. My next step was to plug this into the policy condition expression as follows: IsNull(ExecuteWql ('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System" and TimeGenerated > "20130101010000.000000–000"'), 0)
When I try to manually evaluate this policy in SSMS, I receive an "Invalid Query" error message.I assume that SWbemDateTime isn't available to use inside Policy Based Management policies. All the examples of how to handle the kind of dynamic date creation I have seen are for use in PowerShell, VBScript, or SSIS. I've played with using DateDiff, DateAdd, and GetDate inside the query string, with no success.
Why does the ExecuteWql above fail?Is it at all possible to dynamically generate a datetime (say, 24 hours ago) as part of the query string parameter of the ExecuteWql call?What might that look like?
View 2 Replies
View Related
Apr 6, 2015
I have a procedure that works fine from SSMS but sometimes fails when running via SQL Agent. The SP sends emails..Here is the error message "Failed to initialize sqlcmd library with error number -2147467259"
<p>Javier Villegas | <a href="http://www.twitter.com/javier_vill" target="_blank" title="Twitter" rel="nofollow"> @javier_vill</a> |Â <a href="http://sql-javier-villegas.blogspot.com/"
rel="nofollow">http://sql-javier-villegas.blogspot.com/</a></p>.
View 3 Replies
View Related
Apr 12, 2015
I got the backup failed with error 665.
We have a scheduled weekly full backup job running through maintenance plan. We are using Sql 2008r2. Our backup server is windows 2008R2. There is plenty of space in the backup server but still my database full backup failed with the following error.
Executing the query "BACKUP DATABASE [Test] TO DISK = N'C:fullbackup." failed with the following error: "Write on "C:fullbackup est_backup_2015_04_12_200003.bak" failed: 665(The requested operation could not be completed due to a file system limitation) BACKUP DATABASE is terminating abnormally.
View 1 Replies
View Related
Feb 24, 2006
Hello,
I have created an SSIS package to retrieve data from a Lotus Notes database using the NotesSQL 3.02g ODBC driver.
In SSIS design mode, I can connect to the Notes datasource using the following connection string without any validation errors.
uid=UserID;Dsn=LN_Costs;
I have tried other variations of the connection string including every possible connection string parameter available to the driver as follows.
server=Server_Name;uid=UserID;Dsn=DSN_Name;Driver={Lotus NotesSQL Driver (*.nsf)};database=costing/productcost.nsf;username=UserID;encryptpwd=encrypted_password;maxsubquery=20;maxstmtlen=4096;maxrels=20;maxvarcharlen=254;keeptempidx=1;maxlongvarcharlen=512;showimplicitflds=0;mapspecialchars=1;threadtimeout=60;
Using the above connection strings in SSIS design mode, the datasource test succeeds, and an sql select statement in a datasource reader returns the table structure with no error.
However, when I try to run the package, I receive the following error.
SSIS package "Sales Data Load.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0047062 at Data Flow Task, DataReader Source 2 [408]: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "DataReader Source 2" (408) failed validation and returned error code 0x80131937.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "Sales Data Load.dtsx" finished: Failure.
Furthermore, I have packages configured in SQL 2000 DTS to use the same system dsn without any errors.
Why doesn't this work in SQL 2005 SSIS?
Thanks.
View 4 Replies
View Related
Feb 24, 2006
Hello,
I have created an SSIS package to retrieve data from a Lotus Notes database using the NotesSQL 3.02g ODBC driver.
In SSIS design mode, I can connect to the Notes datasource using the following connection string without any validation errors.
uid=UserID;Dsn=LN_Costs;
I have tried other variations of the connection string including every possible connection string parameter available to the driver as follows.
server=Server_Name;uid=UserID;Dsn=DSN_Name;Driver={Lotus NotesSQL Driver (*.nsf)};database=costing/productcost.nsf;username=UserID;encryptpwd=encrypted_password;maxsubquery=20;maxstmtlen=4096;maxrels=20;maxvarcharlen=254;keeptempidx=1;maxlongvarcharlen=512;showimplicitflds=0;mapspecialchars=1;threadtimeout=60;
Using the above connection strings in SSIS design mode, the datasource test succeeds, and an sql select statement in a datasource reader returns the table structure with no error.
However, when I try to run the package, I receive the following error.
SSIS package "Sales Data Load.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0047062 at Data Flow Task, DataReader Source 2 [408]: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "DataReader Source 2" (408) failed validation and returned error code 0x80131937.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "Sales Data Load.dtsx" finished: Failure.
Furthermore, I have packages configured in SQL 2000 DTS to use the same system dsn without any errors.
Why doesn't this work in SQL 2005 SSIS?
Thanks.
View 12 Replies
View Related
May 5, 2006
Installed SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:
Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.
1. What could be wrong?
2. How do I fix it?
View 9 Replies
View Related
Jun 21, 2015
I have TWO named SQL Server instances (on the same machine) and I need to know the port of each of them, how can I do that? Is it write to check the following:
Which one to take: "TCP Dynamic Ports" or "TCP Port"? and what is the difference between them anyways?Â
Can the two instances (or more)Â on the same machine use the same port?!
View 12 Replies
View Related
Jul 8, 2015
Have 6 SQL Server 2012  failover clusters  environments on Windows 2012 R2 standard edition.Have intermittent connectivity issues when using Windows Authentication, with the error "test connection failed because of an error in initializing provider. login timeout expired" . Am checking by using a UDL file and have tried the below.
1) Have made port changes to use static 1433 port.
2) Have enabled shared memory and using Named Pipes and TCP/IP by using cliconfig.
3) Have turned off firewall.
4) Loopback is disabled
5) SQL Browser is running, have changed 'Built in Account setting' Â from 'Local Service' to 'Network Service'. but with no effect.
Still I am getting intermittent connectivity issues.
View 5 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
May 26, 2006
This is my error text... how do I get this nonsense to stop?!
===================================
Exception of type 'System.OutOfMemoryException' was thrown. (Microsoft Visual Studio)
------------------------------
Program Location:
at System.String.GetStringForStringBuilder(String value, Int32 startIndex, Int32 length, Int32 capacity)
at System.Text.StringBuilder.GetNewString(String currentString, Int32 requiredLength)
at System.Text.StringBuilder.Append(Char value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BufferTextWriter.Write(Char ch)
at System.IO.TextWriter.Write(Char[] buffer, Int32 index, Int32 count)
at System.IO.TextWriter.Write(Char[] buffer)
at System.IO.TextWriter.Write(String value)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
View 1 Replies
View Related
Sep 27, 2007
Hello,
I am having a crystal report using datastored in a dataset. When I select one of items in a dropdownlist, it gives me this error message. Note that I used that code before in another web page using a different crystal report and a different dataSet and it worked successfully, but this time it doesn't work....anyone can tell me what causes this error and how to solve it???
NOTE: I am using a vb code behind in my .aspx page
Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: CrystalDecisions.CrystalReports.Engine.FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt:
Error in formula <Record_Selection>.
'{StProd2.ItemDescription}'
The result of selection formula must be a boolean.]
.F(String , EngineExceptionErrorID
)
.A(Int16 , Int32 )
.@(Int16 )
CrystalDecisions.CrystalReports.Engine.FormatEngine.GetPage(PageRequestContext reqContext)
CrystalDecisions.ReportSource.LocalReportSourceBase.GetPage(PageRequestContext pageReqContext)
CrystalDecisions.Web.ReportAgent.u(Boolean N)
CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e)
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Page.ProcessRequestMain()
View 1 Replies
View Related
Sep 8, 2015
When I boot my computer (Windows Home Premium 64bit) there is a pop up that says "Configuration System failed to initialize" and I don't know what might cause this..
View 2 Replies
View Related
Oct 27, 2015
connecting to a SQL Server Instance. I have a SQL server DB on a server having an Instance not running on the default port. Let's say ServerAInstanceA has the services exposed on Port 12345. When I'm trying to connect to ServerAInstanceA without specifying the port number, while I can connect from one client machine (ClientA), I am unable to connect from a different client machine (ClientB).On a side note, when I provide the port number, I can connect both from clients A and B. My question is, when I do not provide the port number, why is one client machine able to connect while the other isn't?
View 4 Replies
View Related
Aug 18, 2006
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
@[User::Variable] +(DT_WSTR,4) YEAR( GETDATE() )+"0"+(DT_WSTR,2) MONTH( GETDATE() ) + (DT_WSTR,2) DAY( GETDATE() )
The result:
C:Documents and SettingsmroushDesktopOSU20060818
the 20060818 part will change everyday ie.(tomorrow will be 20060819, next day 20060820 and so on.)
View 6 Replies
View Related
Jun 8, 2007
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
What I can do to solve this issue.
Bye!
Daniel
View 1 Replies
View Related
Sep 5, 2006
I have used the copy database wizard, but I realized I had forgotten to shrink the transaction log file. So I canceled the wizard. My database, detached by the wizard, has now disappeared. The mdf file is still there, but when I try to attach it manually I get the "create file encountered operating system error 5 while attempting to open the physical file..." error.
Any way I can recover it?
Thanks.
View 4 Replies
View Related
Dec 21, 2006
Hi,
I am facing a problem on a server which has raid 5 solution (3 disks), the raid controller went down 2 of the disks were off in the Bios.
We added the 3 disks to a different server identical in brand and architecture, the raid controller was able to reconfigure the virtual drive H:.
All files were there, we installed sql server 2005 on the new server, but when we tried to attach the database we got the error below:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'myserver'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0x00000000af0000 in file 'C:Datamylog_log.LDF'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Operating system error 38(Reached the end of the file.) on file "C:Datamylog_log.LDF" during ReadFileHdr.
Could not open new database 'mydb'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 823)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=823&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I tried the following steps but it always failed:
- create a new db with the same name of the lost db;
- put the db in emergency mode;
- stop sql service and replace the mdf file;
- start sql service;
- Run Dbcc checkdb('mydb')
we got the error below:
Msg 945, Level 14, State 2, Line 1
Database 'ism0506' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
Any HELP please ?
Thanks,
Tarek Ghazali
Sql Server MVP
View 5 Replies
View Related