DB Engine :: Find Total Memory Allocated To Server And CPU Utilization
Apr 30, 2015I am searching for query to find total memory allocated to sqlserver, and how much being used utilized as well cpu utilization percentage .
View 10 RepliesI am searching for query to find total memory allocated to sqlserver, and how much being used utilized as well cpu utilization percentage .
View 10 RepliesOne of our servers has 20GB of memory and SQL server has been allocated 18.5 GB out of it, however SQL Server only uses about 9GB or so.
OS: Windows 2003 Server
MS SQL Server 2000 SP4
awe enabled
min & max server memory (run values) are: 18432
/PAE switch in boot.ini
any help why SQL server is not using 18.5 GB allocated to it, would be greatly appreciated?
Anyone has a "one sql statement" to get the total spaceused and totalspace allocated of an instance ? ie same as sum of relevance fieldsfrom sp_spaceused for each database in an instance, that works accrossversion of mssql from 6 onward.ThanksKD
View 1 Replies View RelatedWe have run into an issue on a dedicated SSAS 2012 SP1 server where the allocated memory is not being utilized, causing some slowness in use, connections, and queries.
Total Memory on the server is 512, and after startup, the utilized memory gets up to a max of 60GB and stops there. Checking the Resource Monitor, msmdsrv.exe is only taking around 39GB overall. With the current properties, that should be at 330GB. Am I missing something in the settings or in configuration that should be changed?
Version: SQL Server 2012 SP1 Enterprise (11.0.3000)
OS: Windows Server 2012 Datacenter - Fully patched and up to date
Databases: 2 Tabular models
Server: 512GB RAM
Current memory configuration:
Hard Memory Limit - 0 (Default)
LowMemoryLimit - 65% (Default)
TotalMemoryLimit - 95% (Default is 80)
VertiPaqMemoryLimit - 60% (Default)
VertiPaqPaginingPolicy - 1 (Default)
MemoryHeapType - 2 (Default)
Could anybody tell me how to find out the total space allocated to a database excluding the log files in SQL server 2000. Thanks
View 1 Replies View RelatedHi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
I recently changed the max. memory option in SQL from 24 GB to 30GB but the perfmon counters still only show 24 GB. Any ideas on why it is not recognizing the change? The server has Win 2003 EE and 32 GB of RAM.
View 5 Replies View RelatedI installed 4GB of memory and I have never seen SQL memory utilization go beyond 2GB. I have SQL server set up to use as much memory as it needs. Does anyone no if SQL server can make use of more than 2GB.
View 1 Replies View RelatedOurs is a SQL 7.0 Enterprise edition with NT 4.0 Enterprise Edition. SQL Server has been configured with the default, 'Dynamic memory Allocation'. The system has 4GB of RAM. This is a dedicated SQL Server machine. But SQL Server seems to use only 1.8GB RAM(Counter: Total Server Memory) The page faults seem to be a max. of 600 and an avg. of 100. The processor utilization has suddenly increased to 90%. Is there anything wrong with the way SQL server is using memory? Is is not true that SQL Server 7.0 Enterprise edition can use upto 3GB RAM in a 4GB system?
Are there any links that can help troubleshoot this problem?
Thank you.
-Praveena
What do people think is normal for memory utilization? I know that's toobroad, so here are some basics.MS SQL Server 2000, Windows 2000 Server, 2GB RAMDb 1, size = 2.0 GBDb 2, size = 300MBDb 3, size = 50MBDb 4, size = 30MBDb 5, size = 30MBTypically 4-6 users, moderate usage 8-hrs/day. Performance has not slowed.Reboot on Sunday. sqlservr.exe in the Task Manager reports the followingSun 61MBMon 200MBTues 800MBWed 1,124MBThu 1,424MBFri 1,303MBI was getting srv 2020 errors when I had just 1 GB RAM: "The server wasunable to allocate from the system paged pool because the pool was empty."Then I did several updates to address this and got more RAM. I haven't seenthe errors since, but I haven't waited for them to happen: I'm rebootingevery week now. The memory numbers make me suspect SQL Server.Scratching my head. Not sure if my problem is gone, and this is normal SQLServer 2000 behavior, or if my problem is still lurking and I've only mutedit a bit.Any thoughts greatly appreciated.Tom
View 3 Replies View RelatedDear all,
One of the server is having 2 GB of RAM and task manager is showing 1.87 GB memory in use.
I have to migrate few databases on the same server.
With high IO Operations.
I know server require more RAM, but how can i prove that server needs more RAM ?
Regards
Mohd Sufian
I have a few in house developed application (VB based) that access the SQL server for adding, appending , creating tables. The application does the changes thru queries dynamically generated at the application level.
My MS SQL Server runs on a PIII / 256 MB Ram / 18 GB HDD
The problem is that the memory utilization of SQL server keeps growing constantly. Out of 512 MB (256 Physical + 256 Virtual) available teh memory utilization reaches a level of 490 MB and statys constant. Though SQL Server shows a utilization of 150 MB.
I suspect that SQL is not releasing memory back to the system. Please help in resolving. The problem may lie at the applications developed.
Jdindian
Environment: Win2003 SP1, 32 bit, SQL Server 2K5
My server has 16GB RM but it is using only 3GB. And I see my server is using 3GB of Virtual Memory, too. Why my physical memory is not being utilized? How can I increase Physical Memory usage and decrease VM usage?
Canada DBA
My group is trying to ensure that there is a sufficient amount of cushion between the space allocated and the current size of a database. I know that I can check this using the Enterprise Manager. Is there a stored procedure or a systems table that holds this information. I know that sp_spaceused will give me the unallocated space, but i want the allocated space. Any suggestions?
View 2 Replies View RelatedWe have a system(32GB RAM and 2 TB hard disk, Windows7,SQL SERVER 2008R2 enterprise 64 bit). Looks like whenever i run some query(even query result 50 records) on the database, the Memory utilization is very high(30 GB) in task manager. How can i control this over usage? The memory setting is default in server properties(min 0 and max 2147483647).
View 7 Replies View RelatedCan someone point me to some good articles or perhaps directly supply some words of wisdom with regard to wise utilization of variables within a T-SQL script from and standpoint of conserving memory usage and improved execution cost?
For example:
(1) Is it better to use varchars, nvarchars, etc. defined with minimal lengths to support the needs of the script or is it just as efficient to declare all with a length of say 4,000?
(2) I've seen behavior that leads me to believe that when passing a variable as a parameter in a nested procedure call, if the declared types of the parameter and the variable being passed in don't match (i.e. one is numeric(38,10) and the other is int), then implicit type conversions hurt performance. Is this true and how broadly does it apply?
(3) Does the number of variables declared in a script materially impact the performance and / or resource utlization?
(4) Is it more efficient to have a series of variable value assignments in a single SELECT statement versus a series of SET statements? Should I always perfer one to the other? Only within a looping construct?
Thanks,
Shadowraven
We have two server configured in always on mode .
windows is sql server 2012 64 bit edition and sql server is 2012 64 bit edition.
RAM installed on both server is around 65 gb of which 49 gb is max server memory allocated for sql services on both servers.
database related to reporting services are also in always on group .
We have also configured for reporting services and both are running on their respecting server.
Issue is on primary server reporting service is using almost 7 gb while on secondary it is using 10 gb even when there are 5 reports and its used within offices .
what issue and how to check why ssrs is using high memory..
any query , perfmon counters
reports are randomly used at client side
i have checked memory utilization through task manger..
Is there any easy way to detect SQL Server memory is getting paged out? Any DMV query or tips to confirm it is paging out.
My SQL Server Version is: Microsoft SQL Server 2008 (SP3) - 10.0.5500.0 (X64)
Is there has any SQL query to check running out of "min memory per query SQL Server"(default value is 1024KB)?
View 2 Replies View RelatedHow to set maximum server memory by using sql scripts in sql server 2014?
View 5 Replies View RelatedWe have a new set up on VM to run an application running 24*7 (migrated from SQL server 2008R2) with below configs:
1. OS- Windows server 2012 Standard 64 bit hosted on Virtual Machine
2. Memory 16 GB and Cores =4 with 2.4GhZ processor
3. SQL server 2012 SP2 , 64 bit Standard edition.
4. Total size of databases as of now 15 GB with biggest being 5 GB.
How should i go around in setting the MAX and MIN server memory settings. I have this set up for many of SQL 2005 and 2008R2 servers, but for 2012 i heard that things has slightly changed.
How should i start analyzing and setting the right value of this MAX and MIN?
Is there a way to find out total number of queries ran i.e by day/hour or since the database was brought up in SQL Server 7?
Thanks in advance,
On first Node A: The server has 16 GB of physical RAM.
On second Node B: The server has 10 GB of physical RAM.
Now, this being Active Active, Node A can be clustered on failure onto Node B..Now reporting server is configured under these two nodes, with defined MAX and MIN server memory of 12 as MAX and 0 is min IN GB.Now with this setting on SQL whenever the cluster moves, such config make OS goes low on node for 10 GB.I am only left with option of switching this MAX and MIN to a default setting or is there any other alternative such as script which can change this setting accordingly when cluster moves to respective server.
After I have set the maximum sql server memory in sql server 2014 using sp_configure, do I need to reboot whole server or restart sql service?
View 4 Replies View Relatedi want to create a lot of index for my database for performance.but i need find memory usage by indexes.
How to find memory usage by index in sql server?
I am monitoring our production server, and noticed that periodically we have spikes of Memory Paging Rate (pages/sec).
How to find particular queries/stored procedures that causing this?
I want to create a lot of index for my database for performance.
But I need find memory usage by indexes.
How to find memory usage by index in sql server?
I want to know how it calculates CPU utilization percentage (we see in Task Manager).
Further how can we find total capacity of our CPU in ms/sec....
How do i find Total allocated space and used space of a memory optimized filegroup?
use memory_optimized_db
Go
select (SUM(size)*8.0)/1024.0 as Space,
FILEGROUP_NAME ( data_space_id ) , type_desc from sys.database_files
group by data_space_id,type_desc;
above query gives "current used size of the container " of memory optimized file group but doesn't give Total space detail.
Good Morning,
Is the 1 Gb limit a limitation of 1 Gb for all instances of express, or is it a per instance limitation?
Thanks
Kay
Hi,
Can anybody explain to me what's going on with my Target memory and Total memory in Perfmon?
Last week, before I upgraded my servers memory, they were both almost the same, at around 24 on the graph. Target was just fractionally above total, but there was almost no space between the two.
Then I doubled my servers memory to 4GB and expected to see total go way up and target stay the same. However, target went up to 72, and total came down to 16. When I looked this morning, target is now around 47 and total is 25.
I guess I expected these numbers to fluctuate, but not as much as this, and also why is there now such a big difference between target and total?
Thanks
Colin
Our monitoring tool shows that our production system periodically experiencing large rate - up to 800 memory pages/sec. How to find out which particular queries, S.P., processes that initiate this?
View 3 Replies View RelatedI have created a report as shown below using OLTP tables.
No
Description
CA
PA
Variance
10101
Bank of Tampa
388353.69
208048.92
87%
10104
Wachovia Operating
275933.37
-
0%
10105
Wachovia Payroll
217.95
-
0%
10201
Accounts Receivable
16735.60
34829.14
-52%
20002
Account Payable
-175919.72
-106018.68
66%
Now I want to insert total in the middle of the table, like I want to display:
Total of CA when No in (10101,10104,10105) as 'Total Cash'
then
I want to display total of 'Total Cash' + 'Accounts Receivable'(10201) as 'Cash & Receivables'
No
Description
CA
PA
Variance
10101
Bank of Tampa
388353.69
208048.92
87%
10104
Wachovia Operating
275933.37
-
0%
10105
Wachovia Payroll
217.95
-
0%
Total Cash
664505.01
10201
Accounts Receivable
16735.60
34829.14
-52%
Cash & Receivables
681240.61
20002
Account Payable
-175919.72
-106018.68
66%
How do I do this?