i have a column with mulitple ids stored with commas . i want to pass ids and get data along with name from the table..how to get multiselect value in a variable in sql server functionÂ
View 4 Replies
I am using RS 2000. I have a multi select parameter where I can select multiple states by separating with a comma. I am trying to figure out how to incorporate an "All" parameter.
Query:
Select [name], city, state, zipcode
From Golf inner join charlist_to_table(@State,Default)f on State = f.str
Function:
CREATE FUNCTION charlist_to_table
(@list ntext,
@delimiter nchar(1) = N',')
RETURNS @tbl Table (listpos int IDENTITY(1, 1) NOT NULL,
str varchar(4000),
nstr nvarchar(2000)) AS
BEGIN
DECLARE @pos int,
@textpos int,
@chunklen smallint,
@tmpstr nvarchar(4000),
@leftover nvarchar(4000),
@tmpval nvarchar(4000)
SET @textpos = 1
SET @leftover = ''
WHILE @textpos <= datalength(@list) / 2
BEGIN
SET @chunklen = 4000 - datalength(@leftover) / 2
SET @tmpstr = @leftover + substring(@list, @textpos, @chunklen)
SET @textpos = @textpos + @chunklen
SET @pos = charindex(@delimiter, @tmpstr)
WHILE @pos > 0
BEGIN
SET @tmpval = ltrim(rtrim(left(@tmpstr, @pos - 1)))
INSERT @tbl (str, nstr) VALUES(@tmpval, @tmpval)
SET @tmpstr = substring(@tmpstr, @pos + 1, len(@tmpstr))
SET @pos = charindex(@delimiter, @tmpstr)
END
SET @leftover = @tmpstr
END
INSERT @tbl(str, nstr) VALUES (ltrim(rtrim(@leftover)),
ltrim(rtrim(@leftover)))
RETURN
END
GO
Anyone have any ideas?
Thanks,
Deb
How Do I fix View(below) or Multi-Table select(below) to use this Function to return distinct rows via qcParent_ID?
Following Function populates a field (with concat list of related titles) with other required fields:
Create Function [dbo].openItemsIntoList(@Delimeter varchar(15),@qcparent_ID varchar(1000))
Returns Varchar(8000) as
Begin
Declare @Lists as varchar(8000);
Select @Lists = '';
Select @Lists = @Lists + itemTitle + @Delimeter From z_QClocate_openAll_Qualifier
Where @qcParent_ID = qcParent_ID;
Return Substring(@Lists,1,len(@Lists)-len(@Delimeter));
End
works perfect against single table select (returning 54 distinct rows by qcParent_ID):
Select a.qcParent_ID, a.Facility, a.Modality, openItemListToFix
From dbo.a2_qcEntryForm a
JOIN (Select DISTINCT qcParent_ID, dbo.openItemsIntoList(' / AND ',qcParent_ID) as openItemListToFix FROM dbo.a3_qcItems2Fix) i
on a.qcParent_ID = i.qcParent_ID
But data is needed from 3 tables...
- Created a VIEW that returns all (82) rows (negating distinct of the function on qcParent_ID)
- Failed Miserably Integrating Function call into a multi-table select (inexperienced with complex joins)
This VIEW returns ALL (82) rows in table:
CREATE VIEW z_QClocate_openAll AS
SELECT dbo.a1_qcParent.qcStatus, dbo.a1_qcParent.qcAlert, dbo.a3_qcItems2Fix.qcParent_ID, dbo.a3_qcItems2Fix.qcEntryForm_ID,
dbo.a3_qcItems2Fix.itemComplete, dbo.a3_qcItems2Fix.itemTitle, dbo.a2_qcEntryForm.Facility, dbo.a2_qcEntryForm.Modality
FROM dbo.a1_qcParent INNER JOIN
dbo.a2_qcEntryForm ON dbo.a1_qcParent.qcParent_ID = dbo.a2_qcEntryForm.qcParent_ID INNER JOIN
dbo.a3_qcItems2Fix ON dbo.a2_qcEntryForm.qcEntryForm_ID = dbo.a3_qcItems2Fix.qcEntryForm_ID AND
dbo.a1_qcParent.qcParent_ID = dbo.a3_qcItems2Fix.qcParent_ID
WHERE (dbo.a1_qcParent.qcStatus = 'Awaiting Attn') AND (dbo.a3_qcItems2Fix.itemComplete = 0) OR
(dbo.a1_qcParent.qcStatus = 'In Process') OR
(dbo.a1_qcParent.qcStatus = 'Re-Opened')
Calling like this returns ALL 82 rows (negating the functions distinct):
Select a.qcParent_ID, a.qcStatus, a.qcAlert, a.itemComplete, a.Facility, a.Modality, openItemListToFix
From z_QClocate_openAll a
JOIN (Select DISTINCT qcParent_ID, dbo.openItemsIntoList(' / AND ',qcParent_ID) as openItemListToFix FROM dbo.a3_qcItems2Fix) i
on a.qcParent_ID = i.qcParent_ID
AND THEN THERES...
Failing miserably on Integrating the Function call into This SELECT ON MULTI-TABLES:
How to integrate the Function call:
JOIN (Select DISTINCT qcParent_ID, dbo.openItemsIntoList(' / AND ',qcParent_ID) as openItemListToFix FROM dbo.a3_qcItems2Fix) i
on a.qcParent_ID = i.qcParent_ID
into the multi-table Select relationships (while maintaining Where & Order By):
SELECT dbo.a1_qcParent.qcStatus, dbo.a1_qcParent.qcAlert, dbo.a3_qcItems2Fix.qcParent_ID, dbo.a3_qcItems2Fix.qcEntryForm_ID,
dbo.a3_qcItems2Fix.itemComplete, dbo.a3_qcItems2Fix.itemTitle, dbo.a2_qcEntryForm.Facility, dbo.a2_qcEntryForm.Modality
FROM dbo.a1_qcParent INNER JOIN
dbo.a2_qcEntryForm ON dbo.a1_qcParent.qcParent_ID = dbo.a2_qcEntryForm.qcParent_ID INNER JOIN
dbo.a3_qcItems2Fix ON dbo.a2_qcEntryForm.qcEntryForm_ID = dbo.a3_qcItems2Fix.qcEntryForm_ID AND
dbo.a1_qcParent.qcParent_ID = dbo.a3_qcItems2Fix.qcParent_ID
WHERE (dbo.a1_qcParent.qcStatus = 'Awaiting Attn') AND (dbo.a3_qcItems2Fix.itemComplete = 0) OR
(dbo.a1_qcParent.qcStatus = 'In Process') OR
(dbo.a1_qcParent.qcStatus = 'Re-Opened')
I wanted to know if there's a limit on how many targets I can manage in Multi Server Administration.In addition, are there any known limits regarding managing SQL instances with different versions (SQL 2005,2008,2008R2 and 2012).
View 4 Replies View RelatedI tend to learn from example and am used to powershell. If for instance in powershell I wanted to get-something and store it in a variable I could, then use it again in the same code. In this example of a table order items where there are order_num, quantity and item_prices how could I declare ordertotal as a variable then instead of repeating it again at "having sum", instead use the variable in its place?
Any example of such a use of a variable that still lets me select the order_num, ordertotal and group them etc? I hope to simply replace in the "having section" the agg function with "ordertotal" which bombs out.
select order_num, sum(quantity*item_price) as ordertotal
from orderitems
group by order_num
having sum(quantity*item_price) >=50
order by ordertotal;
Hello,I am trying to construct a query across 5 tables but primarily 3tables. Plan, Provider, ProviderLocation are the three primary tablesthe other tables are lookup tables for values the other tables.PlanID is the primary in Plan andPlanProviderProviderLocationLookups---------------------------------------------PlanIDProviderIDProviderIDLookupTypePlanNamePlanIDProviderStatusLookupKeyRegionIDLastName...LookupValue....FirstName...Given a PlanID I want all the Providers with a ProviderStatus = 0I can get the query to work just fine if there are records but what Iwant is if there are no records then I at least want one record withthe Plan information. Here is a sample of the Query:SELECT pln.PlanName, pln.PlanID, l3.LookupValue as Region,p.ProviderID, p.SSNEIN, pl.DisplayLocationOnPCP,pl.NoDisplayDate, pl.ProviderStatus, pl.InvalidDate,l1.LookupValue as ReasonMain, l2.LookupValue as ReasonSub,pl.InvalidDataFROM Plans plnINNER JOIN Lookups l3 ON l3.LookupType = 'REGN'AND pln.RegionID = l3.Lookupkeyleft outer JOIN Provider p ON pln.PlanID = p.PlanIDleft outer JOIN ProviderLocation pl ON p.ProviderID = pl.ProviderIDleft outer JOIN Lookups l1 ON l1.LookupType = 'PLRM'AND pl.ReasonMain = l1.LookupKeyleft outer JOIN Lookups l2 ON l2.LookupType = 'PLX1'AND pl.ReasonSub = l2.LookupkeyWHERE pln.PlanID = '123456789' AND pl.ProviderStatus = 0ORDER BY p.PlanID, p.ProviderID, pl.SiteLocationNumI know the problew the ProviderStatus on the Where clause is keepingany records from being returned but I'm not good enough at this toanother select.Can anybody give me some suggestions?ThanksDavid
View 5 Replies View RelatedI am new to programming trying hard to learn. I made a code for Views in mssql for the 2 tables below:I am wondering if I could make it 3, 4 or more tables at the same time. How can incorporate in the following codes I made.
Create View vwEmployeeInfoByGender
as
Select FirstName, MiddleName, FamilyName, Gender, BirthDate,
MaritalStatus
from tblEmployeeInfo
join tblGender
on tblEmployeeInfo.GenderID
= tblGender.GenderID
I am trying to place a database offline.
When I right in Microsoft SQL Server Management Studio on the database > Take Offline
Set offline failed for Database 'OperationsManagerAC'.
Transaction (Process ID 56) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 1205)
So I am trying with some queries to pass the database from Single user to multi user but it fails
USE [master]
GO
ALTER DATABASE OperationsManagerAC SET MULTI_USER GO
Msg 1205, Level 13, State 68, Line 1</p><p>Transaction (Process ID 52) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
I tried also
alter DATABASE OperationsManagerAC SET OFFLINE WITH ROLLBACK IMMEDIATE
IT FAILS AS WELL... with the same error... how to run the SQL Statements without using
How to proceed next?
Can anyone tell me how to do this in sql server?I am currently doing this query in oracle:select table1.col1,table1.col2,table2.col3,table4.col4where table1.col1 = table2.col3 andtable2.col3 = table4.col5 and(table1.col1,table1.col2) not inselect table2.col4,table2.col5 from table2it is the where two column values from any row are not found in anyrow in table2 part that I can't figure out.thanksJeff
View 10 Replies View RelatedI am in the middle of taking course 2073B €“ Programming a Microsoft SQL Server 2000 Database. I noticed that in Module9: Implementing User-Defined Functions exercise 2, page 25; step 2 is not returning the correct answer.
Select employeeid,name,title,mgremployeeid from dbo.fn_findreports(2)
It returns manager id for both 2 and 5 and I think it should just return the results only for manager id 2. The query results for step 1 is correct but not for step 2.
Somewhere in the code I think it should compare the inemployeeid with the previous inemployeeid, and then add a counter. If the two inemployeeid are not the same then reset the counter. Then maybe add an if statement or a case statement. Can you help with the logic? Thanks!
Here is the code of the function in the book:
/*
** fn_FindReports.sql
**
** This multi-statement table-valued user-defined
** function takes an EmplyeeID number as its parameter
** and provides information about all employees who
** report to that person.
*/
USE ClassNorthwind
GO
/*
** As a multi-statement table-valued user-defined
** function it starts with the function name,
** input parameter definition and defines the output
** table.
*/
CREATE FUNCTION fn_FindReports (@InEmployeeID char(5))
RETURNS @reports TABLE
(EmployeeID char(5) PRIMARY KEY,
Name nvarchar(40) NOT NULL,
Title nvarchar(30),
MgrEmployeeID int,
processed tinyint default 0)
-- Returns a result set that lists all the employees who
-- report to a given employee directly or indirectly
AS
BEGIN
DECLARE @RowsAdded int
-- Initialize @reports with direct reports of the given employee
INSERT @reports
SELECT EmployeeID, Name = FirstName + ' ' + LastName, Title, ReportsTo, 0
FROM EMPLOYEES
WHERE ReportsTo = @InEmployeeID
SET @RowsAdded = @@rowcount
-- While new employees were added in the previous iteration
WHILE @RowsAdded > 0
BEGIN
-- Mark all employee records whose direct reports are going to be
-- found in this iteration
UPDATE @reports
SET processed = 1
WHERE processed = 0
-- Insert employees who report to employees marked 1
INSERT @reports
SELECT e.EmployeeID, Name = FirstName + ' ' + LastName , e.Title, e.ReportsTo, 0
FROM employees e, @reports r
WHERE e.ReportsTo = r.EmployeeID
AND r.processed = 1
SET @RowsAdded = @@rowcount
-- Mark all employee records whose direct reports have been
-- found in this iteration
UPDATE @reports
SET processed = 2
WHERE processed = 1
END
RETURN -- Provides the value of @reports as the result
END
GO
I am having a hard time getting a variable recognized in a function. The variable is not being seen properly in the charindex function.
@ExtType contains = X
@PhoneNo contains = +1 (202) 123-9876 X012
select @intPos = charindex(@ExtType,Upper(@PhoneNo))
I am trying to install SQL Server Sep 2005 CTP - ENTERPRISE, there are
View 1 Replies View RelatedHello,
i am facing a bizarre problem, accessing data from a remote server which has been linked to my sql.
My SQL server is 2005 and the remote server is SQL 2000.
i have linked the remote server (called LinkedServer) so that when i run this query:
SELECT * FROM LinkedServer.SomeDB.dbo.SomeTable
executes successfully! However, when i run a similar query like this:
SELECT Column1 AS Col1,
LinkedServer.SomeDB.dbo.SomeTable.Column2 as Col2,
Alias.Column3 as Col3
FROM LinkedServer.SomeDB.dbo.SomeTable
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable1 ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = LinkedServer.SomeDB.dbo.SomeOtherTable1.Column3
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable2 AS Alias
ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = Alias.Column3
It gives me this error:
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column2" could not be bound.
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column3" could not be bound.
I have noticed that this error is generated only for the selected columns whose path has either been repeated (e.g. "LinkedServer.SomeDB.dbo.SomeTable.Column2" as opposed to "Column2") or for columns which are from aliased tables.
What is going on?!?!?!??!?!?!
Any Help would be tremendously appreciated!!!! 8..)
I'm trying to create a simple function that will do a count on a table. I want to pass the table name in form of a parameter to the variable and this function will return the count as an int. See my function below...
CREATE FUNCTION count_rows (@tablename varchar(100)
RETURNS int AS
BEGIN
DECLARE @emp_count AS int
declare @declaration varchar(100)
[Code] ....
The errors I am getting are as follows:
Msg 102, Level 15, State 1, Procedure count_rows, Line 3
Incorrect syntax near 'RETURNS'.
Msg 102, Level 15, State 1, Procedure count_rows, Line 10
Incorrect syntax near '@declaration'.
Msg 178, Level 15, State 1, Procedure count_rows, Line 14
A RETURN statement with a return value cannot be used in this context.
Hello all,
I have two mult-value parameters in my report. Both of them working with selecting one or more values. But, when I test using "(Select All)" values for both parameters , only one parameter works. The "available values" for these two parameters are both from the data set.
select distinct ProductType
from Product
order by ProductType
Any suggestion? thx
Hi All
I am using SQL Server 2005 with SP2. I have multi select parameter in the report. In SP2 reporting services gives Select All option in the drop down.
Is there any way I can remove that option from the list?
Thanks
I am unable to the access on table even after providing the SELECT permission on table.
Used Query by me :
Here Test is schema ; Card is table ; User is Satish
To grant select on Table
GRANT SELECT ON TEST.Card TO satish
Even after this it is not working, So provided select on schema also.
used query : GRANT SELECT ON SCHEMA::TESTÂ TO Satish.
There are several parameters on a report. One of the parameter is a multi-select enabled parameter and I suppressed the value "All" showing as one of the item in the drop down list, simply by filter out the [bha].[bha].CURRENTMEMBER.LEVEL.ORDINAL to 1, as "(Select All)" is pre-assigned to the drop list when multi-select is enabled and it is confusing to show "(Select All)" and "All" in the drop list. However I have another report which is linked to this report and the value which is required to pass to this report for this parameter is "All". Can I pass the "Select All" as a parameter from the other report? If so, how? Thanks.
View 1 Replies View RelatedI have a report with the following dataset query:
Code Snippet
SELECT ...,
dbo.getActivitySinceBeginningYear(..., @countryId ,...) AS HoursYear
FROM ....
WHERE cast(detail.COUNTRY_ID as nvarchar(max)) IN (@countryId)
AND ...
GROUP BY ...
countryId is defined as a String multi-valued parameter.
The getActivitySinceBeginningYear is defined as follows:
Code Snippet
ALTER FUNCTION dbo.getActivitySinceBeginningYear
(
...
@countryId ntext,
...
)
RETURNS decimal(18,5)
AS
BEGIN
declare @return decimal(18,5)
set @return = 0.0
SELECT @return = SUM(detail.HOURS_WORKED)
FROM ...
inner join charlist_to_table(@countryId, Default) f on detail.COUNTRY_ID = f.str
WHERE ...
RETURN @return
END
This function works as expected if I transmit one ID or several.
The report works fine if I check only one ID.
If I check several IDs, the report displays this error:
Procedure or function dbo.getActivitySinceBeginningYear has too many arguments specified.
Why???
My second problem is with the Where clause:
Code Snippet
WHERE cast(detail.COUNTRY_ID as nvarchar(max)) IN (@countryId)
If I do:
Code SnippetWHERE detail.COUNTRY_ID IN (@countryId)
I have the following error:
Conversion failed when converting the nvarchar value '3,5' to data type int.
(I transmitted 3 and 5 for countryId)
That's why I tried to use a cast, but the data returned by the query is wrong when I transmit several value.
??
Hi all, in SQL 2000 I can select data from a different server using the sintax
"select * from server_name.db_name.owner.table_name".
Can i do the same thing with a table function (e.g "select * from server_name.db_name.owner.MyFun_name()")?
Is there a way to do it?
Thank you all, Andrew
In the provided CLR-function sample there is only one parameter from the SQL statement to the function. I can't find any info about how to pass more then one parameter. Is this possible somehow?
like:
Code Snippet
Select ShopCode,PickAValue(OrderDate,Article) as BestArticle
from T_Sales
Group by ShopCode
hans
I'm creating a Multi-statement Table-Valued Function...
Is it possible to insert variables into the table? In other words, is it possible
to have something like
declare
@value1 varchar(10)
@value2 varchar(10)
BEGIN
<do some work on value1 and value2>
INSERT @returningTable
@value1, @value2
instead of
BEGIN
<do some work on value1 and value2>
INSERT @returningTable
SELECT col1, col2 from T_SOURCE
Here's why I want to insert variables...My function needs to return a table which contains a 'partial' incremental key.
I'll go with an example to explain what i have to do
Source_table
col1 col2
Mike 10
Mike 20
Ben 50
John 15
John 25
John 35
The table that my function needs to create should look like this
col1 col2 col3
Mike 10 1
Mike 20 2
Ben 50 1
John 15 1
John 25 2
John 35 3
I thought of creating a cursor and then looping through it generate col3 and save values of other individual columns in variables. But don't know how to use those variables when inserting records into function table.
Any other ideas? I'm caoming from Oracle world, I might be having some strange ideas on how to solve this problem. Any help is appreciated.
Thank you.
I am facing issue in generating total sum and daily sum from table ThresholdData.
DailyTransactionAmount should be sum of todays amount in the table
TransactionAmount should be sum of all amount in the table.
Basically,
1. I don't want to scan ThresholdData table twice.
2. I don't want to create temporary table/table variable/CTE for this.
3. Is there is any way to make it done in single query.
I hope, where criteria is not possible in partition function. I am trying query something as given below,
SELECTÂ Â TransactionDate,
  TransactionAmount,
  ROW_NUMBER() over (order by TransactionDate) AS TransactionCount,
  SUM(TransactionAmount) over (partition by id ) AS TransactionAmount,Â
  SUM(TransactionAmount) over (partition by id ,CONVERT (DATE, @TodaysTransactionDate)) AS DailyTransactionAmount
 FROM ThresholdData
 WHERE id = @id
 AND transactiondate >= dateadd(d,-@TransactionDaysLimit,@TodaysTransactionDate)
Hello everybody,
I need to create a function which takes a multi-value parameter. When I select more than one item, I get the error that I have too many arguments. Does anybody have a solution?
Or can I create a view and then do a "SELECT * FROM viewName WHERE columnName IN (@param)"?
Thanks in advance for your answers.
using below code to replace the city names, how to avoid hard coding of city names in below query and get from a table.
select id, city,
LTRIM(RTRIM(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(city,
'JRK_Ikosium', 'Icosium'), 'JRK_Géryville', 'El_Bayadh'),'JRK_Cirta', 'Constantine'),'JRK_Rusicade', 'Philippeville'),
'JRK_Saldae', 'Bougie')))
New_city_name
from towns
I want to create a classifier function where I can restrict all the logins except two logins for the resource pool.
Case Scenario is : I am creating a resource pool and on that pool I want to restrict the users for that particular pool but IÂ want to allow some of the user IDs full access to that databses so how could I create a script for that scenario.
Hello,
I am trying to figure out how to use the select maximum command in SQL Server 2005. I have already created a database and I have it populate it with multiple fields and multiple records. I Would like to create a new column or field which contains the maximum value from four of the fields. I have already created a column and I am trying to figure out how to use a command or SQL statement which is entered into the computed equation or formula in the properties for this field/column.
Any help you can provide will be greatly appreciated!
Thank you,
Nathan
I have an SSRS report with several variables, some of which are multi-valued. Â The main query that feeds the report uses some table value functions. Â For example, the query looks something like this:
select tv1.a, tv1.b, tv2.x, tv2.y, tbl.m, tbl.n
from tableValueFunction1(@MultiValueParam) as tv1
inner join tableValueFunction2(@MultiValueParam) as tv2 on tv1.xxx = tv2.xxx
inner join regularTable as tbl on tv1.xxx = tbl.xxx
where tbl.abc in (@MultiValueParam).When I try to run this, I get an error saying that I'm feeding the wrong number of parameters into the table value functions. Â I've fed multi-valued parameters to stored procedures before and used a splitter function to split out the comma separated values, so I was planning to do the same thing in this scenario. Â However, this is different. Â When I look at the query in SQL Profiler, it shows discrete values for the multi value parameter. Â For example, the same query above looks like this when viewed through the profiler (using 1,2,3 as my multi-value selection):
select tv1.a, tv1.b, tv2.x, tv3.y, tbl.m, tbl.n
from tableValueFunction1(1,2,3) as tv1
inner join tableValueFunction2(1,2,3) as tv2 on tv1.xxx = tv2.xxx
inner join regularTable as tbl on tv1.xxx = tbl.xxx
where tbl.abc in (1,2,3)
In other words, SSRS isn't converting the multi-value parameter to a comma separated string, like it normally does.
I have a holding tree with more than 200 companies, and several layers. Each company is defined by:
- a unique ID
- a direct parent ID --> the company immediately above in the tree
- an ultimate parent ID --> the company that owns the entire tree, it is the same for all
Now I am looking for a function that returns the list of all companies below a given one in the tree, and there could be several layers underneath. Doing that for the ultimate parent is easy because all companies now who their ultimate parent is, but I am struggling to build a function that works for an intermediary parent in a dynamic way.
I am writing a stored procedure and have a query where I create a variable from other table
Declare @Sem varchar (12) Null
@Decision varchar(1) Null
Select emplid,name, Semester
Decision1=(select * from tbldecision where reader=1)
Decision2=(select * from tbldecision where reader=2)
Where Semester=@Sem
And Decision1=@Decision
But I am getting error for Decision1 , Decision2. How can I do that.
I have a specific variation on the standard 'Column Invalid' question: I have this query that works fine:
SELECT vd.Question ,
csq.Q# ,
csq.Q_Sort ,
csq.Q_SubSort ,
AVG(CAST(vd.Response AS FLOAT)) AS AvgC ,
vd.RType
[Code] ....
When I add this second average column like this:
SELECT vd.Question ,
csq.Q# ,
csq.Q_Sort ,
csq.Q_SubSort ,
AVG(CAST(vd.Response AS FLOAT)) AS AvgC ,
[Code] ....
I get the error: Column 'dbo.vwData.Response' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
Clearly things are in the right place before the change, so I can only assume that the OVER clause is my problem. Is this just not possible?
I am trying to set a vaiable from a select statement
DECLARE @VALUE_KEEP NVARCHAR(120),
@COLUMN_NAME NVARCHAR(120)
SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME')
SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3)
PRINT @VALUE_KEEP
PRINT @COLUMN_NAME
RESULTS
-------------------------------------------------------------------------------------------
FirstName <-----------@VALUE_KEEP
FirstName <-----------@COLUMN_NAME
SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName
SELECT FirstName from Contacts returns: Brent
How do I make this select statement work using the @COLUMN_NAME variable?
Any help greatly appreciated!
here is what i am wanting to do but is it possible to use multi fields with an IN statement?
SELECT *
FROM usmastf
WHERE usm_book, usm_acct IN
(SELECT usac_book, usac_acct
FROM uscommf
WHERE usac_code = 'O/W')