I've a spatial (GIS) Data which is used frequently insertion, updation.
5 lakh records insertion in daily basis. when I trying to generate reports last 3 days or one weak, it takes 20-30 minute.
very disappointing while playing with clients. how to boostup and perform fast.
I think as so once we set query plan in buffer permanently then i would be faster than ever.
Our server administrator forwarded some messages from SCOM that indicate:
SQL DB Engine 2012 Page Life Expectancy and Buffer Cache Hit Ratio is too low
When I logged into the offending server, I could not find anything in the SQL Log File that indicates this.
I was wondering how did SCOM identify this issue - where in SQL Server would this have been reported to SCOM?
I'm getting an alert which states that both my Buffer Cache Hit Ratio and PLE are low on one of my SQL Servers though I'm not sure how to correctly check this.
I ran:
SELECT object_name, counter_name, cntr_value
FROM sys.dm_os_performance_counters
WHERE [object_name] LIKE '%Buffer Manager%'
AND [counter_name] = 'Buffer cache hit ratio'
Which gives me the Buffer Cache Hit Ratio, cntr_Value of 9 though its constantly dipping between 3-3000 and is never steady and I'm unsure if this is normal.
I also ran:
SELECT object_name, counter_name, cntr_value
FROM sys.dm_os_performance_counters
WHERE [object_name] LIKE '%Buffer Manager%'
AND [counter_name] = 'Page life expectancy'
Which gives me the Page life expectancy of 209061.
If these values would cause concern and if this is a normal Buffer Cache Hit Ratio? It's constantly dropping from high or low from what I can see. These scripts were pulled from another forum and I'm assuming they're showing the correct values.
Is there a way to drop clean buffers at the database level instead of the server/instance level like the undocumented €śDBCC FLUSHPROCINDB (@dbid)€??
Is there a workaround for €śdbo€? to be able to flush procedure and data cache without being elevated to €śsysadmin€? server role?
PS: I am aware of the sp_recompile option that can be used to invalidate cached execution plans.
Thx.
In SQL 2012 I'm trying to delete a log file (both physically and logically). There are two log files and one of them is unnecessary. When I click 'remove' in SSMS it will delete the log file, but then when I go back under database properties it's still showing up even though the file has been physically removed from the OS. I'm wondering what steps I can take to get rid of the file permanently?
View 12 Replies View RelatedHelp, have recently upgraded from 6.5 to 7.0 and have come across a problem with performance. The problem appears to relate to the buffer cache being flushed, the buffer cache hit ratio drops from 98% to 0% in a matter of a second. It then very slowly grows, then is flushed again, then increase slowly upto 30%.
Does any one have any ideas as to what would flush the buffer cache?
Any comments would be much appreciated - cheers
Hi,
My problem is that I cannot completely clean buffer cache on SQL Server 2005 version 9.00.2047.00 (probably SP1).
Right after I run DBCC DROPCLEANBUFFERS in the context of my database (this is development server, and so far I am only the one who is working with a particular database), I run a script that quetries sys.dm_os_buffer_descriptors view also from the context of my database to make sure that the buffer cache is really clean. However it shows large number of entries totalling 42 MB.
I ran both DBCC an the script in the past too, and it always showed nothing in the results, that means that buffers were really clean. The reason why I am running this is for benchmarking of existing and new application.
Does anybody have any idea, suggestions, how to troubleshoot this issue ? I already closed all connections to this database, but rebooting the server is not an option since other people are also working on it.
Thanks
Does anyone know how to measure the buffer cache hit ratio? I have been reading a lot about it but can't find this measurement in Performance Monitor.
Thanks
What is better values for Buffer Cache Hot Ratio in SQL Server 2012. Is the values changed from 2008r2 to 2012?
View 2 Replies View RelatedI am wondering if 100% buffer cache hit ratio is considered not good in general?
Are there instances that it is actually bad and can contribute to server performance degradation?
Any thoughts on the topic most welcome :)
--------------------
keeping it simple...
This issue just happen recently. The buffer cache ratio went from > 90%to 50% and has slowly been climbing back up over 8 hours or so. Itscurrently @ 76%. Is this something I should take action on immediately?It seems to be coming back to normal...
View 1 Replies View RelatedHiI have trouble with MSSQL2000 SP4 (without any hotfixes). During last twoweeks it start works anormally. After last optimalization (about few monthsago) it works good (fast, without blocks). Its buffer cache hit ratio wasabout 99.7-99.8. Last day it starts work slow, there was many blocks anddedlocks. There are no any queries, jobs and applications was added. Nowbuffer cache hit ratio oscilate about 95-98. I try update statistics andreindex some hard used tables, but there is no effect or effect is weryshort (after few hours problem return).Mayby somene know what it could be?Is it possible to estimate how each table (using DBCC SHOW_STATISTICS orDBCC SHOWCONTIG or others) how the table affect on total buffer cache hitratio?Marek---www.programowanieobiektowe.pl
View 1 Replies View RelatedHello,
Does the performance counter Buffer cache object refer to Data cache and procedure cache or just refers to Data cache???
I was of the opinion that Buffer cache means data cache and Plan cache means procedure cache. Can someone throw some light???
Regards
Jaideep
We are troubleshooting a performance problem and the test result is slow the 1st time but the subsequent runs are faster.. Logging out of application and log back in ( connecting to a new database session) did not clear the buffer cache as I thought it would.. When does the database clear the buffer cache? Is it not per database session?
I can issue CHECKPOINT and then run DBCC DROPCLEANBUFFERS to clear the buffers in the disk. But since we are testing from the application,do we need to run these commands via application code to clear buffer/per database session OR can we run these commands from a management studio session?
I have a virtual server (VMware ESX) with 64GB RAM running a single instance of SQL 2012 SP1. The max memory config is set to 59392 (58GB).
The Page Life Expectancy for this server has been averaging well under 10 mins for the last few days, according to our monitoring.
I have been checking the amount of data in the buffer cache periodically during the day with the below query, which seems to show that there is never more than about 10GB of data at any one time, frequently dropping below 5GB:
SELECT COUNT(*) AS BufferPages,
CONVERT(decimal(10, 2), COUNT(*) / 128.0) AS BufferMB
FROM sys.dm_os_buffer_descriptorsWhy would the amount of cached data be so low (and cause so much churn)?
I am aware that other things will require some of that memory (plan cache etc.) but with Max Mem of 58GB, I would expect there to be a much higher amount of actual cached data at any one time. I did the same checks on another VM with the same amount of RAM/Max Mem setting, and there was 50GB of data in the cache, with PLE measured in hours.
I am using SQL 2012 and I am trying to find buffer cache usage by DB objects within a particular DB.
I am running the following query
select
name as DB,
objname as db_object_name,
COUNT(name) as cache_page_count,
COUNT('x')*8.0/1024 as size_mb
[Code] ....
Following are the results:-
DB db_object_name cache_page_countsize_mb
TEST_DBNULL 428 3.34375
TEST_DBsysobjvalues 369 2.882812
TEST_DBsyscolpars 44 0.34375
TEST_DBsysssislog 38 0.296875
....
.....
Question- Why am I getting 428 pages for which there is no corresponding DB object? Why are so many pages present in sys.dm_os_buffer_descriptors but are missing from sys.allocation_units.
How do i check the size of the datacache allocated from the buffer pool by sql server?
DMV or anything to show me the pool allocation sizes for the various pools in sql server i think i may be able to work from there.
I'm collecting performance data via DMV to check the buffer hit ratio on several servers. Sometimes I get values high above 100% hit Ratio.
Example (50050%):
SQLServer:Buffer Manager:Buffer cache hit ratio 2002
SQLServer:Buffer Manager:Buffer cache hit ratio base 4
Extending the buffer pool onto an SSD drive that is shared ? For instance, if we had a mirrored system drive(The C logical partition) on SSD's, can we use the remaining space on that mirrored partition to extend my SQL 2014 buffer pool ? I understand that in this scenario, there is some competition for the I/O throughput between SQL Server's extended buffer pool and the OS. We intend to have the pagefile on a different disk, other than this specific SSD.Â
View 11 Replies View RelatedI encountered the following error while attempting to preview an RDL report I was developing in VS2010 using SSDT:"The size necessary to buffer the XML content exceeded the buffer quota"
View 3 Replies View RelatedWe have a set of reports with same header section in all the reports. So while developing a new report i used to copy that header section to the new report with same dataset names (without any change) , but while rendering the report it is throwing error " The size necessary to buffer the XML content exceeded the buffer quota".
View 2 Replies View RelatedHi
I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data.
There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.".
SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ).
I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log.
Does any one have any idea what happened?
TIA . . . Ed
Good day everyone,
I'm experiencing a completely random warning from any given row count component within any given data flow task. It occurs sporadically. Whilst distracting, I don't see any adverse effects to the data after the packages complete. Can someone weigh in on this warning and let me know if it is indeed benign or what I maybe able to do to fix it?
Here's the warning:
"A call to the ProcessInput method for input 75997 on component "CNT Rows sent for STG table" (75995) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 4 before the call, and 5 after the call returned."
Thanks,
Langston
Im getting this error when trying to set up a cache dependency...are there any special permissions etc?From CS:SqlCacheDependency dep = new SqlCacheDependency("MySite-Cache", "Products");Cache.Insert("Products", de.GetAllProductsList(), dep); From connectionStrings.config:<add name="SiteDB" connectionString="Data Source=localhost,[port]SQLEXPRESS;Integrated Security=true;User Instance=true; AttachDBFileName=|DataDirectory|ASPNETDB.MDF" providerName="System.Data.SqlClient" />Also tried this using my machinename<add name="SiteDB" connectionString="Data
Source=<machinename>,[port]SQLEXPRESS;Integrated Security=true;User
Instance=true; AttachDBFileName=|DataDirectory|ASPNETDB.MDF"
providerName="System.Data.SqlClient" /> From web.config: <caching> <sqlCacheDependency enabled="true" pollTime="10000"> <databases> <add name="MySite-Cache" connectionStringName="SiteDB" pollTime="2000"/> </databases> </sqlCacheDependency> </caching> EDIT: So making progress I can't seem to get the table registered for cache dependency:The sample i have says"aspnet_regsql.exe -E -S .SqlExpress -d aspnetdb -t Customers -et"and the command line response is "Enabling the table for SQL cache dependency..An error has happened. Details of the exception:The table 'Customers' cannot be found in the database."Where does this "Customers" table come from? There is obviously not an application specific "Customers" table in aspnetdb I'm confused probably more by the example than anything....
Ramesh writes "Hi,
Is there any possibility to execute a query in sql server 2000 without keep / using buffer.
Thanks"
Does SQL Server have a query cache similar to mysql, whereas the queryresult is cached, if the table has not been changed?If so, please refer me to more info.Thanks.--http://www.dbForumz.com/ This article was posted by author's requestArticles individually checked for conformance to usenet standardsTopic URL: http://www.dbForumz.com/General-Dis...pict170423.htmlVisit Topic URL to contact author (reg. req'd). Report abuse: http://www.dbForumz.com/eform.php?p=571428
View 1 Replies View RelatedIs there a clean way to flush the query cache so I can simulate the first execution of an SQL statement any time I want to?
View 3 Replies View RelatedHi,
During a trace in profiler, I see some lines that indicate :
exec sp_execute 12
Or
exec sp_execute 24
I suppose these are query in cache and are recall by query processor ? If yes, how can I see this query in clear text ?
Thanks for help
Hello,
I need to disable query cache in MS SQL Server 2005 Express. How can i do it?
My application can opertate ~2K records per sec (INSERT).
A million records costa me extra 142 Mb of RAM.
It means that sql server will take exrta 1Gb of RAM every hour.
I can't afford that.
Can anyone please help me?
Hi guys,
I am looking at the plan caches/cached pages from the perspective of
sys.dm_os_memory_cache_counters and sql serverlan Cache - Cache Pages
For the first one I am using
select (sum(single_pages_kb) + sum(multi_pages_kb) )
from sys.dm_os_memory_cache_counters
where type = 'CACHESTORE_SQLCP' or type = 'CACHESTORE_OBJCP'
a slight change from a query in
http://blogs.msdn.com/sqlprogrammability/
For the second just perfmon.
The first one gives me a count of about 670,000 pages only for the object and query cache and the second one gives me a total of about 100,000 pages for five type of caches including object and query.
If I am using the query from http://blogs.msdn.com/sqlprogrammability/ to determin the plan cache size
select (sum(single_pages_kb) + sum(multi_pages_kb) ) * 8 / (1024.0 * 1024.0) as plan_cache_in_GB
from sys.dm_os_memory_cache_counters
where type = 'CACHESTORE_SQLCP' or type = 'CACHESTORE_OBJCP'
it gives me about 5 GB when in fact my SQL Server it can access only max 2GB with Total and Target Server Memory at about 1.5 GB.
Does anyone have any idea what is going on?
Hi,
SQLSERVER 2005 keeps throwing assertation error and generating crashdumps.
I want to isolate the cause, however, the query is too long (>2kb) to fit in a crash log.
Is it possible to increase the size allocated to showing the query in the crash dump, or get the full text of that query causing the crash?
Is any way we can tell sql server to keep specific (long runing) query in procedure Cache.
I already tried to do this by creating job (run every 1 hr from 8 am to 6 pm)
but is not enough
Thanks
HI
May I know how to clear the cache area in the analyser as I need to
know the time taken for execution of an sql statement(query) before
and after creation of indexes.
tia
MK