DB Engine :: Restoring / Repairing (MSDB) Of 2012 Installed Copy?
Sep 16, 2015
Suddenly one day I found some corruptions have occurred in my SQL Server 2012 installation. Because my 'msdb' has been marked SUSPECT/CORRUPT; hence no new work can be done as per my schedules.
I have gone about trying to repair it. I followed this article here: [URL] [the region 'Create new MSDB Database'].
I am facing some sizeable difficulties in doing this on my own. Steps 1. & 2. I have done. I am now stuck at step no. 3.My instance name is SQLEXPRESS. So, when I give,
SQLCMD -E -S<SQLEXPRESS> -dmaster -Q"EXEC sp_detach_db msdb"Â [as per the article], what I get is:
The System cannot find the file specified.
So I am stuck at that point. What's with the 'cannot find file specified'? The stored procedure, or the mdf, ldf files for my msdb? What is it?Also, if and when I am through with step no. 3 I would like to know about steps 5. & 6. also which are soon to follow [like how to do them correctly, safely and from where, the different options]. This is a huge priority for me to get my sql server up and running again because I can't do my other coding works without it. Everything is stalled. Slowly reaching the desperation, SOS mode..
View 7 Replies
ADVERTISEMENT
Jun 13, 2001
Hi,
I am having problems with my SQL server Agent.
1) When I try to create a New Job/Alert/Operator, I get an error message:
Error 207: Invalid Column Name "category_id"
Invalid Column Name "netsend_address"
Invalid Column Name "last_netsend_date"
Invalid Column Name "last_netsend_time"
.....All these are referring to columns in System Tables of the system Database MSDB.
2)In another SQL Server...say "A", in it's SQL Server Agent, using the Multi-Server Administration, I set up the SQL Server Agent of "A" as the Master (MSX) server, and set up a Target(TSX) server pointing to the Server "B" that has problems in SQL Agent....referred in 1) above. When I try to "Detach the MSX Server" from server B, i get a message Error 207: Invalid Column Name "netsend_address", and cannot detach..........This is again referrring to a System Table.
It appears that the problem is with the MSDB database being corrupt. Is there a way I can Repair a Corrupt MSDB without Re-installing SQL Server 2000 and without a Backup.
Any help greatly appreciate.
Thanks
Russell
View 6 Replies
View Related
Jan 24, 2002
Hi,
I am trying to build a test environment for our production server. I backedup and restored all my databases. I had to copy the jobs too, so I backedup and restored msdb database. When I try to change any of the jobs, I get the following message.
"Error 14274: Cannot add, update, or delete a job (or its steps or schedules) that originated from an MSX server."
I have no clue what this message is about. Can someone please provide me with some clues about how I can modify my jobs and get my test environment to work.
Thanks,
Rob
View 2 Replies
View Related
Apr 18, 2006
I need some data from msdb.dbo.sysjobs and msdb.dbo.sysjobhistory but I need it from a backup file.
I don't need to restore the msdb database, I just need some data from the backup. Everytime I try to restore it under some innocuous name like bills_db it tells me msdb is in use.
Is there a way to restore this db to some other name and retrieve data from it?
View 2 Replies
View Related
Nov 10, 2000
QUESTION? ----!!!!!
I BACKED MSDB TO A DEVICE AND THEN RAN THE FOLLOWING CODE ON ANOTHER SERVER:
RESTORE FILELISTONLY
FROM DISK = 'd:mssql7ackupcomplete_bak.bak'
RESTORE DATABASE Test_MSDB
FROM DISK = 'd:mssql7ackupcomplete_bak.bak'
WITH MOVE 'MSDBData' TO 'd:mssql7datamsdbDATA.mdf',
MOVE 'Northwind_log' TO 'd:mssql7datamsdbLOG.ldf'
I get the following error: (Why are the logical and physical name referring to master database?)
LogicalName PhysicalName Type ...1
-------------- ------------------------- ----------- ...2 continued
master F:MSSQL7DATAMASTER.MDF D ...3 below
mastlog F:MSSQL7datamastlog.ldf L ...4
1... FileGroupName Size MaxSize
2... --------- --------- ----------
3... PRIMARY 11206656 35184372080640
4... NULL 1310720 35184372080640
(2 row(s) affected)
Server: Msg 3234, Level 16, State 2, Line 3
File 'MSDBData' is not a database file for database 'Test_MSDB'.
Server: Msg 3013, Level 16, State 1, Line 3
Backup or restore operation terminating abnormally.
-------------------------------------------------------------------------
QUESTION? -- WILL BACKING UP MSDB AND RESTORING IT TO ANOTHER SERVER MOVE
ALL MY JOBS AS WELL? IF NOT HOW DO I MOVE MY JOBS FROM ONE
SERVER TO ANOTHER?
View 1 Replies
View Related
Dec 12, 2002
I restored msdb on another server after moving all user databases and logins. I expected to see the jobs after the restore but I didn't.
I've read the article(Q314546) about moving databases and it indicates that you don't have to script them if you move msdb.
I didn't restore master. Only msdb.
Your thoughts please?
Sidney
View 3 Replies
View Related
Nov 10, 2005
I have a server attached to a SAN, all user db's are on the SAN, master, tempdb, and msdb are on the local machine. We will be replacing the machine (not the SAN) to a newer sql server. Our plan was to create the new server with same name, deattach current user db's,backup master and msdb, then connect new server with same name an IP to SAN. I then wanted to restore the master and msdb db's to the new machine, and attach the user db's. We are running log shipping to a stand-by server in this configuration. I was thinking I could let last tran log backup and copy occur, and then let the last restore happen on the standby. I would then shut down the agent. Should I not be able to restore the MSDB and master to the new server (as long as all file folder locations are the same) and be ready to go? Or are there issues when restoring the Master and MSDB to a new server from a different server.
View 5 Replies
View Related
Aug 25, 2007
I have inherited a SQLS erver 2000 instance where the client neverimplemented a backup startegy for the "master" and "msdb" databases.MSDB is now showing errors and my only option for a restore is from atape backup of the server.Any thoughts..
View 1 Replies
View Related
Sep 21, 2000
How does one correctly go about restoring the MSDB database?
How/what should I do with the status (loading)?
I have a good backup of the MSDB.
Any help will be appreciated.
View 2 Replies
View Related
Oct 15, 2015
In one off my production box, we are notable to take a backups of MSDB . When i look at the error, it is failing locate allocation unit ID.. complete error as below
Msg 2533,Sev 16,State 1, Line 36 : Table error : Page (1:111720 ) allocated to object id 110623437, index ID 1, Partition ID 72057594043432960, alloc unit ID 72057594044874752 (type-inrow data) was not seen. This page is invalid or may have an incorrect alloc unit ID in its header.[SQLSTATE 42000]
Due this failure, we are unable to take the backup of MSDB database and our integrity check and reindex jobs also failured with the same.Also, I could see events of I/O issues with underlaying hard dirve with following name
DeviceHarddisk0DR0,has a bad block.
1. I dont no what could happen if restart my server, Question is: Does it recognize MSDB during server statup.
View 9 Replies
View Related
Sep 26, 2015
On one of our SQL Server 2008R2 instances the MSDB log file (MSDBLog.ldf) has grown to 300GB+. The data (.mdf) file is only 3GB.
Neither DBCC Shrinkfile(MSDBLog) nor an interactive "Tasks / Shrink / ..."
I've already deleted much of the historyThe MSDB database is in "Simple" recovery modeI've done a full backup (in case the log was "waiting" for a backup)
I hesitate to do things (such as as Detach / Attach) with MSDB that I might do with a user database.
View 7 Replies
View Related
Jun 28, 2002
I need to copy the msdb to another Server, same network, different Server Name. What's the best way to do this?
View 3 Replies
View Related
Mar 14, 2008
In SQL Server 2000 I developed a utility stored procedure for synchronising all the jobs relating to a specified job category from one SQL Server instance to another. It was quite simple... I restored the MSDB database from a source server to the target server but restored as a different db name, eg. MSDB_Copy. The sproc then just queried some system tables like sysjobs and syscategories and recreated the jobs on the target server. Now, in SQL Server 2005, some things have changed of course! For example, if I do...
select * from msdb_copy.dbo.syscategories
The result is from msdb.dbo.syscategories! Obviously, this is because 2005 have replaced the old concept of system tables with views. The question is, can anyone suggest a way to select data from 'tables' like syscategories in a copy of the MSDB database?
Thanks,
Clive
View 4 Replies
View Related
Nov 26, 2015
Is there any windows command or any tool which would tell me what all 3rd party s/w's or Filtered drivers on my server (like antivirus, monitoring tools like Diskeeper or any I/O throttling s/w etc..)
View 3 Replies
View Related
Oct 6, 2015
We are running 2014 enterprise. Have there been any features added to sql server that ease the challenge of restoring only data? I often find myself creating separate databases so that a restore of a db's data doesnt also restore procs and functions and vice versa.Â
View 7 Replies
View Related
Nov 21, 2015
I am restoring a backup of sql server 2005 which I inherited on to sql server 2012 and is in a recovery pending state and the reason why is, this is a backup from a different domain and does not have the logins from the legacy domain, looks like its some access issue as its not being able to find the necessary login on sql server 2012.
View 4 Replies
View Related
Aug 6, 2010
I have three instances running on my sql 2008 r2 enterprise.I have taken full backup of one database from default instance.I login both the instances thru sa account.Now when I try to restore that backup on another instance it gives me the following error....
Â
TITLE: Microsoft SQL Server Management Studio
Restore failed for Server 'WRCP2F1CWS315TEJA'. Â (Microsoft.SqlServer.SmoExtended)
System.Data.SqlClient.SqlError: The operating system returned the error '32(The process cannot access the file because it is being used by another process.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:Program FilesMicrosoft SQL
ServerMSSQL10.MSSQLSERVERMSSQLDATAfcms.mdf'. (Microsoft.SqlServer.Smo)
what can be done to restore bakup in another instance ...
View 15 Replies
View Related
May 19, 2008
Hi all,
An internal licensing review is being carried out at my site for the first time since I joined. I have been asked to confirm that development SQL Server instances have been installed from MSDN installation disks and production instances from non-MSDN disks. I understand that serverproperty('licensetype') will show me this information in SQL Server 2000, and I am (perhaps incorrectly?) assuming that a result of "DISABLED" means MSDN was used for the installation.
In SQL Server 2005, i believe the installation does not record the necessary information in the registry, meaning serverproperty('licensetype') is of no use.
Is the question i've been asked impossible to answer? Is there any way I can find out if MSDN disks (or network copies of them) were used to install a SQL Server 2005 instance?
Many thanks.
James
View 4 Replies
View Related
Feb 23, 2007
SP2 refuses to install for the Database Engine because €œthe previous upgrade did not complete€?, i.e. it detects a suspended installation. The same thing happened to me when I installed SP1. I then remember opening the maintenance dialog and completing the setup, after which SP1 installed just fine.
When I try to do the same thing this time, I€™m presented with the €?complete the suspended installation€? option, which when I run it reports the installation completed successfully. However, in reality the installation still remains in suspended mode for whatever reason. If I reboot and open the maintenance dialog, I€™m still presented with the €?complete the suspended installation€? option. I€™ve even tried to run it more than once, but it doesn€™t help. Needless to say, SP2 still refuses to install.
I don't know why the installation is in a suspended state. I know every part of SP1 installed successfully in the end, and the computer never crashed during the installation. I've been using it every day since then, without any problems. All other parts of SP2 did install successfully.
I created a feedback entry on Microsoft Connect, where you can find the log files created by Windows Installer. The URL is:
https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=259606
Any ideas what I can do to resolve this problem?
View 1 Replies
View Related
Jun 29, 2004
Hi,
I need to set up a Standby database using a copy of datafiles of the primery database. (An SQL backup of the database is not an option).
Is there any option to restore a database from datafiles?
Or is there an option to attach database but into an standby mode?
Please advice,
Zvi Gilinsky
View 3 Replies
View Related
May 1, 2015
I was contacted by the SAN team to test backup/restore of larger databases using a split-mirror backup (BCV) or clone that is taken from production db server and copied to another sql box. They want to use this process once a week. I see the mounted drives with the data/log files. All looks good. Initially I attempted to attach the databases and received (Unable to open the physical file db.mdf Operating System Error 5 Access is denied). I manually granting SQLServerMSSQLUser$<computer_name>$<instance_name> on all of the physical files 20 total. That worked.
Since this will be weekly, the SAN team performed the copy again and now none of the databases can communicate with the newly copied files. NTFS permissions need to be set again. I'm getting (Operating System error 21: the device is not ready). Is there something that I'm missing in this process how the vendor BCV clones the data and SQL communicates with the copied files as I was thinking it would be more automated process?
View 0 Replies
View Related
Mar 18, 2002
Does anyone know a process for repairing a corrupt syslogs table (mssql 6.5). I have tried checkdb, newalloc and rebuilding the extents. All the latter did was screw up the device assignment. Any suggestions?
View 1 Replies
View Related
Jun 16, 2015
We found an interesting 'issue' in one of our productive user database:
The output of msdb..suspect_pages table:
db_idfile_idpage_idevent_typeerror_countlast_update
16 2 22 32015.06.12 10:40
16 2 3 3 3 2015.06.12 10:40
16 2 6 3 3 2015.06.12 10:40
16 2 7 3 3 2015.06.12 10:40
16 2 1 3 3 2015.06.12 10:40
The problem is, that this user database only has one data file and file_id 2 is the log file.I understand that the event_type shows checksum and torn page error but in the log file? DBCC CHECKDB shows no errors and the database is part of an AOAG in synchronized state.We have log backups in every 15 minutes.
View 1 Replies
View Related
Jun 7, 2015
I have to perform disk maintenance on current drive - Drive 'D' where it has sql data (mdf file) and I have added new drive - Drive 'E' By the way Drive 'C' have the program files for SQL Server 2008 R2 What is the correct process to transfer sql data (mdf file) from Drive 'D' to Drive 'E' and later remove Drive 'D' from the server.
View 12 Replies
View Related
Feb 8, 2007
Hi ALL,
Somehow one of tables in my database with clustered index got tempered and the pageid are not in proper order. I tried the checkdb command with repair_rebuild option but it is giving the following error.
Table error: Object ID 1984530649, index ID 1. Page (1:254682) is missing a reference from previous page (1:254681). Possible chain linkage problem.
Server: Msg 8936, Level 16, State 1, Line 1
Table error: Object ID 1984530649, index ID 1. B-tree chain linkage mismatch. (1:254680)->next = (1:256198), but (1:256198)->Prev = (1:256197).
Not able to reindex the index of table. I can not even export the data to any other table with same structure.
Please help me...........
Thanks,
Pracheer
View 2 Replies
View Related
Mar 25, 2015
I was recently tasked with creating an automated process to refresh SSIS packages from MSDB on one server to another and I decided to go the route of using Powershell, however this wasn't as straight forward as I originally imagined so I thought I would share my solution in case others encounter the same request. The below PowerShell code will create all Integration Services folders from the source MSDB (that contain SSIS packages) on the target instance of MSDB then copy all packages to the proper folder locations. The /QUIET option is used to automatically overwrite packages that already exist on the target so make sure you want to overwrite the current versions of your packages before executing.
[Reflection.Assembly]::LoadWithPartialName("Microsoft.SQLServer.ManagedDTS") | out-NULL
$app = New-Object Microsoft.SqlServer.Dts.Runtime.APPLICATION
$SourceServer = "<source server name>"
$TargetServer = "<target server name>"
$Packages = Invoke-Sqlcmd -MaxCharLength 10000000 -ServerInstance $SourceServer -Query "
[Code] .....
View 0 Replies
View Related
Apr 23, 2015
I have a file in Fire bird Database (30 GB with .ydb extension). Â which needs to be restored to SQL Server. I Have created a linked server and done it but it is taking very long time to update the records.
View 8 Replies
View Related
Jan 20, 2015
I have a bunch of packages in msdb. Is there any easier way to move those packages from msdb to DataTools/BIDS, instead of adding one package at a time using ADD option.
View 9 Replies
View Related
Jul 15, 2015
is it possible to get all installed Hotfix with a Query?
like this?
SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition')
View 0 Replies
View Related
Nov 21, 2005
Whenever I start my SQL Express 2005 database, I get the following in the logs :
View 10 Replies
View Related
Nov 3, 2015
I'm having an issue accessing a newly installed SSRS instance. When I browse to the URL it states that "User 'BLAH' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.".
I've gone through various forum posts and followed steps such as running IE as an admin and disabling UAC but I'm unable to get past this unless I run IE as an admin.
View 0 Replies
View Related
Sep 8, 2015
I got full backup on daily schedule its taking more space on Drive because each file has more than 25GB.I am using SLQ server 2008R2 so I'm looking to take the backup with compression instead of uncompressed Backup. What are the impacts of compressed backup. Is there any problems with compressed backup while restoring the backup file.
View 8 Replies
View Related
Feb 27, 2014
I have created the file group for my database.First i took backup of individual file group(mdf and ndf) then I tried to restore only secondary(ndf) file group.I got error like
Restore failed for Server 'pcnameSQLEXPRESS'. (Microsoft.SqlServer.SmoExtended)
File 'regSQL_dat' was not backed up in file 1 on device 'D:vtndf.bak'. The file cannot be restored from this backup set.
RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3144)
When i tried to restore only primary file group i got the same error.
Can i restore individual file group? I
For the purpose of data archiveng,i have taken back up of ndf file (it contains very old data) & i have removed this file from database.Now my customer asking these file data.Now i have to again attach/restore this ndf file.how to attach/restore.
View 1 Replies
View Related
