DB Engine :: Why Cluster And Non-cluster Indexed Created On Same Key

Jun 10, 2015

CREATE TABLE [dbo].[Access](
 [AdminID] [int] NOT NULL,
 [FnID] [int] NOT NULL,
 CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED

[Code] ....

why the cluster and non cluster indexed created on the same key?

View 3 Replies


ADVERTISEMENT

Setup And Upgrade :: Cluster Installation Failed On Adding Node To Cluster

Oct 10, 2015

During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
 
1<sup>st</sup> Method…

1. Open console command (Run->CMD with administrator privileges). 

2. net stop winmgmt 

3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository). 

4. net start winmgmt

2<sup>nd</sup> Method..

1. Disable and stop the WMI service.

a) Command : - sc config winmgmt start= disabled

b. Command : -                 net stop winmgmt

2. Run the following commands.

a).  Command:  Winmgmt /salvagerepository %windir%System32wbem

b). Command:   Winmgmt /resetrepository %windir%System32wbem

3. Re-enable the WMI service

Command:          sc config winmgmt start= auto 

Last command to run after above steps

4. Command:     mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"

File not found Error for above command.

View 3 Replies View Related

Access Denied To Cluster Storage When Restoring 2005 Full Text DB To 2014 Cluster

Jun 10, 2015

I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message

Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.

[code]....

I went as far as giving the folder full access to everyone temporarily and received the same error.

View 1 Replies View Related

DB Engine :: Linked Server Set In Cluster Environment

Apr 24, 2015

Need to set up a linked server in two node SQL Cluster pointing to a standalone SQL thru security setting "be made using current login's security context". It's double hop Kerberos setup. Cluster uses a domain account, so we manually set SPNs for that account with both instance name and protocol as well (set up these SPNs with SQL virtual name only).

Also, constrained delegation has been  set to that stand alone SQL services (MSSQLSvc).

Both SQL cluster and standalone servers are in same domain, cluster service account is domain account and standalone SQL uses default SQL local service account.

Coming to SQL, when I create linked server, sometimes it lets me create without issues and sometime it throws this below warning and even if I create it won't work.

 Login failed for user 'NT AUTHORITY/ANANOMOUS LOGIN'. 

View 6 Replies View Related

DB Engine :: AlwaysOn Feature On Cluster Environment

Sep 16, 2015

To set up AlwaysOn Feature on cluster environment how many VM's we would require.

We have already have 2 VM's for cluster but am not able to configure AlwaysOn. 

View 2 Replies View Related

SQL 2012 :: Advanced Cluster Preparation For New Instance On Existing Cluster

Apr 10, 2014

I ran the Advanced cluster preparation for a new sql instance on an existing cluster.

Slq Server 2012.

After is completed, it was successful, I realized I specified the wrong Instance Root directory.

Is it possible to remove what the preparation installed? Or is it possible to change the root directory?

View 3 Replies View Related

Setup And Upgrade :: Can Build Cluster By Adding Cluster Service

Jul 6, 2015

Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.

View 4 Replies View Related

DB Engine :: Failover Cluster Instance With Mount Point

Jun 25, 2014

I've a fresh installation of SQL Server 2014 Enterprise on Windows Server 2012R2. I've setup de Windows Server Failover Cluster and the validation test has been successfully passed. I use mountpoint so I've disk M: that is the host drive for mounted volume m:Isql2014A that is the base folder for mounted volume

On that folder I've 5 mountpoint:

1) m:isql2014a empdbdata
2) m:isql2014a empdblog
3) m:isql2014auserdata
4) m:isql2014auserlog
5) m:isql2014auserlog

into these 5 mountpoint I've placed the SQL Server files.

After the installation of the first FCI I've re-run the cluster validation wizard and again it has passed successfully. When I try to failover the instance from one node to the other I have 2 problem:

1) every time I do failover, some disks fail to come online for a while and then succeed :

Cluster resource 'CLD - IstA - TempDB Data' of type 'Physical Disk' in clustered role 'SQL Server (ISQL2014A)' failed. The error code was '0xaa' ('The requested resource is in use.').

2) sometimes the SQL Server service fails to start, in the error log I see that the master database is not accessible. The master database in into the m:isql2014abinbackup.

View 7 Replies View Related

DB Engine :: Server 2012 Failover Cluster New Instance

Aug 6, 2015

I am new to SQL Server 2012 clustering.I added a new instance to one of the two nodes.when I try to move it to the other node it fails.Do I need to install it on both?If so, what options do you install on the second node?

View 7 Replies View Related

SQL 2012 :: Server Cluster Without Windows Failover Cluster

Feb 18, 2014

I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?

View 6 Replies View Related

T-SQL (SS2K8) :: Convert Non-cluster Primary Key To Cluster Unique

Nov 6, 2014

I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.

is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.

DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'

[Code] ....

View 8 Replies View Related

Recovery :: Can Join A Node In Windows Cluster Which Is Already In Different Cluster

Oct 8, 2015

can we join a node in a windows cluster which is already in a different cluster?

We have this requirement as we need to setup readable secondary ( always on AG) on the third node.

View 2 Replies View Related

Recovery :: IP Change For Cluster / Nodes And Windows Cluster?

Jul 15, 2015

We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.

IP change for:

1. Both Nodes(Physical)
2. MSDTC
3. SQL Server 
4. windows Cluster 

So Almost... All IPs are going to change.

Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.

View 9 Replies View Related

DB Engine :: Defining MAX And MIN Server Memory Settings On 2 Node Cluster

Sep 29, 2015

On first Node A: The server has 16 GB of physical RAM. 
On second Node B: The server has 10 GB of physical RAM.

Now, this being Active Active, Node A can be clustered on failure onto Node B..Now reporting server is configured under these two nodes, with defined MAX and MIN server memory of 12 as MAX and 0 is min IN GB.Now with this setting on SQL whenever the cluster moves, such config make OS goes low on node for 10 GB.I am only left with option of switching this MAX and MIN to a default setting or is there any other alternative such as script which can change this setting accordingly when cluster moves to respective server.

View 7 Replies View Related

Script To Change Cluster Index To Non Cluster

May 20, 2003

Hi all,

We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.

Thanks,
Deepak

View 2 Replies View Related

Transact SQL :: Difference Between Cluster And Non-cluster Index

Jul 26, 2015

Wanted to know about difference between cluster and non cluster index with example.

When to use cluster index and non cluster index .

View 3 Replies View Related

SQL 6.5 Cluster Upgrade To SQL Server 7.0 Cluster

Jul 17, 2000

I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....

thanks in advance

Jack

View 1 Replies View Related

How To Upgrade SQL Server 2000 Cluster To SQL Server 2005 Cluster(Database)

May 8, 2007

Hi



We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.



Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?



Thanks

Priyanka

View 2 Replies View Related

Active/Active Cluster Failure - How Do You Rebuild And Rejoin A Node In The Cluster?

Aug 30, 2006

We have (had) an active/active cluster. 2 physical machines,
each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.



Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we
rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back
into the cluster and get Ins2 failed back over to Node2.



Does anyone know, for certain, the correct steps to accomplish this? Obviously,
we could backup everything and completely destroy Ins2 and recreate it on Node2
then rejoin the cluster. But I'm looking for something less destructive.



Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2
over? Or will there be registry conflictions?



Any help would be appreciated. Also, if you have any links to some official
documentation, that would be great too.



Thanks

View 4 Replies View Related

Upgrading A SQL Server 2000 Cluster To A SQL Server 2005 Cluster

Dec 28, 2007



We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.

What we were thinking was the following steps... Anyone try this?

1. Break the link between the servers.

2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.

3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.

4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.

Thoughts?

View 2 Replies View Related

Upgrading SQL Server 2000 Cluster To SQL Server 2005 Cluster

May 14, 2008



Friends -

Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.

Let me explain my current environment.

1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.


My Plans:

1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.

2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.

My doubts

1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.

Please advise me and correct my steps.

Cheers
VSH

View 1 Replies View Related

Can The SQL Cluster Virtual IP Be The Same As The Cluster IP?

Jun 13, 2007

Can the SQL Cluster Virtual IP be the same as the cluster IP?

Can I set up the cluster like:

Node 1:10.0.0.1

Node 2:10.0.0.2

MSCS Shared:10.0.0.3

SQL Virtual:10.0.0.3



or do they need to be unique?



View 1 Replies View Related

How To Transfer Or Migrate From Old SQL Cluster 2000 To New SQL Cluster 2000

Jul 4, 2007



I have two Windows 2000 servers (Advance Edition) to form a Windows Cluster. I also install MS SQL 2000 Enterprise Edition on the cluster to form a MS SQL cluster. Now, I want to upgrade the hardware and OS (but keep on using SQL 2000), so I install Windows 2003 server Enterprise Edition on two new servers to form a new Windows Cluster. I am planing to install MS SQL 2000 Enterprise Edition on the new cluster, so the old SQL cluster and new SQL cluster are side by side. I would like to know how to setup a new SQL cluster (I know it has problem to rename SQL Cluster name, so how to fix this problem)? And how to transfer everything (such as system databases, users database, sql user account, password and maintenance plan jobs etc) from old SQL cluster to new SQL cluster? And how to switch over from old SQL cluster to new SQL cluster?



Thanks a lot !

View 8 Replies View Related

How SSIS Works With Cluster SQL And Non Cluster SSIS Service?

Mar 14, 2008



According to microsoft, we can cluster SSIS service but it is NOT RECOMMENDED.
http://msdn2.microsoft.com/en-us/library/ms345193.aspx

Now this is the situation that I have where I need to understand how SSIS works?

Enviornment: Active Active cluster enviornment for SQL server with SSIS server installed as stand alone as default on both node.


Name: Node 1 Node 2
--------- -------------- ---------------------
Server name: Nd1 Nd2
SQL server name: cs-nd1in01 cs-nd2in02
SSIS server name: Nd1 Nd2

BTW, this is cosolidated enviornment so there are more than one application expected and resides on each instance of SQL server.

The question is around SSIS, what would be the best practice to develop SSIS package that can work with above envoinrment.

Secnario: What if my Nd1 fails. SQL server cs-nd1IN01 will be failover to Nd2 and it will be available. But How about SSIS packages? How that understands
to use Nd2 SSIS as Nd1 SSIS is not available. Is anyone has similar experience to setup SSIS in cluster envionrment but as non-cluster service?

Please help. Thanks in adavance.

View 1 Replies View Related

Step By Step For Upgrading SQL Server 2000 Cluster To SQL Server 2005 Cluster

May 15, 2008



Friends -

Could any one of you provide steps for upgrading SQL Server 2000 cluster to SQL server 2005 cluster.

My environment is Windows 2003 server.

Appreciate your support.

Cheers
VSH

View 1 Replies View Related

DB Engine :: Server Log Is Not Created

May 13, 2015

I have SQL 2008 R2 version. The server has enough disk space where the SQL is running. But the log file is not refreshed. in other words a new sql server log file does not create a new file if the old one is full.

View 4 Replies View Related

DB Engine :: Trigger When A New Database Gets Created

Oct 22, 2015

I am looking to create a server wide trigger which will fire whenever a database gets created, I would like to know if there are any gotchas or anything that I need to look out for/test specifically.

The idea is to automatically grant some permissions and take some other actions whenever a database gets created.

View 6 Replies View Related

DB Engine :: Alert When Database Table Is Created

Jul 24, 2015

I use below trigger to email me when a database is created or dropped.
  
CREATE  TRIGGER [DDL_CREATE_DATABASE_EVENT]
ON ALL SERVER
FOR CREATE_DATABASE
AS
DECLARE @bd VARCHAR(MAX)
DECLARE @tsql VARCHAR(MAX)
SET @tsql = EVENTDATA().value

[Code] ...

Is there a way we can get notification when a table is created or altered or dropped ?

View 3 Replies View Related

Reporting Services :: Report Server DB Getting Created On DB Engine

Nov 26, 2015

I've installed Reporting Services 2008R2 STD edition on my local system. I was trying to configure the Report Server, I am able to connect to the Report Server but the ReportDB and ReportTempDB are getting created in Database Engine instead of Report Server, when I connect to Report Server from SSMA this is what I see (Attached) Screen 1.

The screen2 is of Reporting Service Config Manager, When I connect to the report server using the URL what I am seeing is blank last screen shot attached.

View 4 Replies View Related

DB Engine :: How To Find List Of Indexes On Tables On Which Views Has Been Created

Aug 28, 2015

The views are in XYZ production database and user needs the list of indexes on the tables on which the views has been created.

query to find list of indexes on the tables on which the views has been created.

View 4 Replies View Related

DB Engine :: Memory Table Not Cleared If Created Inside A While Loop

Oct 29, 2015

If I create a memory table inside a while loop, I expect that every loop the memory table is (newly) created and thus empty.

But when I test this, I see that on the second, third, ... run the inserted data in the memory table is still present and not cleared.

This can be reproduces with the following code:

DECLARE @tbl TABLE
( [id] BIGINT )
DECLARE @tbl2 TABLE
( [value] BIGINT )
INSERT INTO @tbl
VALUES (1), (2)

[Code] ....

/*
Expectation: twice 11 and 12 in @tbl2
Actual result: three times 11 and 12
*/
SELECT *
FROM @tbl2

Is this a wrong assumption or is this a bug in SQL Server? (Tested on: SQL Server 2014 and 2008).

View 2 Replies View Related

SQL 2k Ent On W2K Cluster

Apr 4, 2002

I am trying to configure a 2 node SQL cluster. MSCS is configured and is failing over correctly, however when I start the installation of SQL Server, and specify the IP address of the virtual server and hit next, the installation hangs, and stops responding. I have ran comclust.exe on both nodes and verified that MSDTC shows up in the cluster administrator. I have searched high and low to no avail---

View 2 Replies View Related

SQL 7.0 On MS Cluster 1.0

May 24, 2000

I installed MS SQl 7.0 on MS Cluster 1.0 as Active/Active
I have NT Ent with sp6 and Sql 7.0 with Sp1.
After two days from the installation one of the SQl Failed to get online we checked in the log I found that the master Database get corrupted.
after the investigation I found that the Heart Beat cable was not their.

My question is : can the heart beat cable cause this corruption.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved