DB Update Fails In Program, Works In Management Studio?
Jul 4, 2007
I have an SQL statement that, when run through SQL Server management studio works fine. However, when I run it on my ASP page, it doesn’t update the data! I have tried both as a stored procedure and as a simple commandText update statement.
All I do is simly update the value of a column based on another column – nothing particularly complex: update customer set dateChanged = System.DateTime.Now.ToString("dd-MMM-yyyy"), CURRSTAT = 'Active',custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END,cust_Changing_To = NULLFROM customers_v WHERE CURRSTAT = 'Changing'
As you can see, nothing that complex. The line that is causing the problem is the case:
custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END
all it does is if another nullable integer column is not null, sets it to the value of that column, else it retains its existing value.
Like I say, this works in Management studio, but I cannot get it to execute programatticaly from an asp page.
No exceptions are being thrown, it just doesn’t update the data.
Any ideas?
Thanks
View 1 Replies
ADVERTISEMENT
Apr 4, 2008
I have a stored procedure which is run through MS Access (yuck). It does not appear to fail, but it does not populate certain tables, and is also rather complex. I did not write it, and am trying my best to fix it. However, when I run the same procedure with the same parameters from within Management Studio (database state is the same, I restore from backup before trying out each execution) it populates the tables correctly. I have profiled both executions (from MS and from Access) and it is running with the same NTUsername, and thus the same permissions. The process used to work and then some changes were made to the DB which seem to have broken it from Access. As far as I know, the Access code has not changed, although it may have done so. The proc call from Access uses the same parameters, and does not throw an error, although it does not appear to close the connection to the DB (I'm looking into this). Access uses an ODBC connection to connect to SQL Server.
Any ideas?
View 3 Replies
View Related
May 30, 2007
I can run the following query in Management Studio, but get the error listed below when I run it from the data tab in Reporting Services:
declare @starttime as datetime
declare @endtime as datetime
declare @timezone as integer
declare @date as datetime
set @timezone = 1
set @date = '5/1/2007'
set @starttime = dateadd(hh, @timezone, @date)
set @endtime = dateadd(d, 1, @starttime)
select @Starttime, @endtime from site
Error Message:
TITLE: Microsoft Report Designer
------------------------------
An error occurred while executing the query.
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure.
------------------------------
ADDITIONAL INFORMATION:
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure. (Microsoft SQL Server, Error: 134)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=134&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
What I am trying to accomplish is the ability for users to select which time zone they want the data in the report to display in. To do this, I created a timezone parameter that has the offset from Central Time (which is how all data is stored in our database).
Any help would be greatly appreciated!
View 4 Replies
View Related
Jul 3, 2007
I have an ASP.NET/ADO.NET page i wrote. It was based off of the development database during most development, and it switched over seamlessly to the production database.
Except for yesterday, when i went back to edit the page. It simply stopped returning results on my queries. To see if it was caused by bad values being passed to the sqldatasource, i tried it in the "Configure Data Source..." window, and it returns zero rows. When passing all of the exact same parameters to the same procedure in the same DB engine, even using the same login information, it works.
Just not in my ADO.NET app anymore...
Can anyone tell me what the hell could be going on here, please? I already rebuilt the page from an older version this morning, being very minimal on changes, and the last thing i changed before it stopped working was the connection string... *BUT* I have triple-checked that against the canon string we have always used in every working copy.
I'm losing a lot of hair over this . Any help would be greatly appreciated.
Thanks in advance
stoland
View 2 Replies
View Related
Mar 17, 2008
I have a bit of an odd problem in an sql statement where it works in management studio but not in c# when setting up a table adapter the sql is:
DECLARE @week char(2)
SET @Week = 7
SELECT student_id, acad_period, register_id, register_group, week_no, absence_code, attendance_type
FROM dbo.sttdstud
WHERE (student_id LIKE '%') AND (register_id LIKE '%') AND (register_group LIKE '%') AND
week_no = Case @Week when null Then '#' Else @Week End
the idea is if they don't enter a number it would bring up all records. This works in mangaement studio but c# brings up the error sql server doesn't support udt on excecution of the sql. This is sql server 2000. Any ideas why this doesn't work and how to fix it.
View 3 Replies
View Related
Oct 26, 2006
Hi,I have an interesting scenario. I have a SQL Server 2000 Standard Edition instance running on Computer A. I'm trying to access it through computers B and C.Computer B has Sql Server 2005 Express Edition installed and I was able to use its Management Studio and connect to instance on Computer A.Computer C has SQL Server 2000 Standard Edition installed. When I try to connect to the instance on Computer A, I get connection failed message.I checked some settings. Both TCP/IP and Named pipes are enabled on the instance in A. The TCP/IP port is set to 1433 for both client and server.Please give me some ideas as to how I can solve this problem. -Thanks
View 5 Replies
View Related
Feb 21, 2008
SELECT favorites.FID, favorites.filename, favorites.username, files.status, files.private, files.views, files.title FROM favorites INNER JOIN files ON favorites.filename = files.filename WHERE (favorites.username = @username) AND (files.status IS NULL) AND (files.private = @private)@private is manually set to 'no'@username is set to profile.usernamewhen I run the above query in microsoft sql server mgmt studio express on the database, it presents all the information i'm asking for very easily. however when i try to implement this query on a aspx .net2.0 page with teh sqldatasource and a gridview, no data is displayed.anyone know what my problem is?
View 1 Replies
View Related
Mar 14, 2008
Hi,
I'm attempting to extract some yearly average figures from our DB. I've written a SELECT statement in SQL Server MS which returns exactly what I need:
SELECT YEAR, CAllSource, AVG(CallTotal) AS [Average calls per day]
FROM (SELECT COUNT(CallID) AS CallTotal, DATEPART(YEAR, Recvddate) AS Year, CASE WHEN CallSource IN ('Auto Ticket', 'Email')
THEN 'Email' WHEN CallSource IN ('Phone') THEN 'Phone' ELSE 'Other' END AS CallSource
FROM Calllog where
DATEPART(MONTH, Recvddate) = 3
AND DATEPART(dw, RecvdDate) NOT IN ('7', '1')
GROUP BY RecvdDATE, callsource) as sub
GROUP BY YEAR, CallSource
ORDER BY YEAR, CallSource
The problem is that when I attempt to use this in SSRS I get the following error:
"sub.Year is not a recognised DATEPART Option".
Now as you can see, "sub.Year" is not even mentioned in the expression. However I noticed that when running the query, SSRS automatically adds "sub." before the YEAR in the section highlighted in yellow above. a) Why is it doing this, and b) does anyone know of a workaround/fix?
Thanks
Matt
View 4 Replies
View Related
Jul 23, 2005
This statement failsupdate ded_temp aset a.balance = (select sum(b.ln_amt)from ded_temp bwhere a.cust_no = b.cust_noand a.ded_type_cd = b.ded_type_cdand a.chk_no = b.chk_nogroup by cust_no, ded_type_cd, chk_no)With this error:Server: Msg 170, Level 15, State 1, Line 1Line 1: Incorrect syntax near 'a'.But this statement:select * from ded_temp awhere a.balance = (select sum(b.ln_amt)from ded_temp bwhere a.cust_no = b.cust_noand a.ded_type_cd = b.ded_type_cdand a.chk_no = b.chk_nogroup by cust_no, ded_type_cd, chk_no)Runs without error:Why? and How should I change the first statement to run my update. Thisstatement of course works fine in Oracle. :)tksken.
View 17 Replies
View Related
May 12, 2007
Hi
I'm a relative SQL Server newbee and have developed a function that converts mm/dd/yyyy to yyy/mm/dd for use as in a DT_DBDATE format for insert into a column with smalldatatime.
I receive the following erros when using the function in the Derived Column Transformation Editor. First, the function, then the error when using it as the expression Derived Column Transformation Editor.
Can anyone explain how I can do this transformation work in this context or suggest a way either do the transformation easier or avoid it altogerher?
Thanks for the look see...
******************************
ALTER FUNCTION [dbo].[convdate]
(
@indate nvarchar(10)
)
RETURNS nvarchar(10)
AS
BEGIN
-- Declare the return variable here
DECLARE @outdate nvarchar(10)
set @outdate =
substring(@indate,patindex('%[1,2][0-9][0-9][0-9]%',@indate),4)+'/'+
substring(@indate,patindex('%[-,1][0-9][/]%',@indate),2)+'/'+
substring(@indate,patindex('%[2,3][0,1,8,9][/]%',@indate),2)
RETURN @outdate
END
********************************
And the error...
expression "lipper.dbo.convdate(eomdate)" failed. The token "." at line number "1", character number "11" was not recognized. The expression cannot be parsed because it contains invalid elements at the location specified.
Error at Data Flow Task [Derived Column [111]]: Cannot parse the expression "lipper.dbo.convdate(eomdate)". The expression was not valid, or there is an out-of-memory error.
Error at Data Flow Task [Derived Column [111]]: The expression "lipper.dbo.convdate(eomdate)" on "input column "eomdate" (165)" is not valid.
Error at Data Flow Task [Derived Column [111]]: Failed to set property "Expression" on "input column "eomdate" (165)".
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC0204006 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.SetInputColumnProperty(Int32 lInputID, Int32 lInputColumnID, String PropertyName, Object vValue)
at Microsoft.DataTransformationServices.Design.DtsDerivedColumnComponentUI.SaveColumns(ColumnInfo[] colNames, String[] inputColumnNames, String[] expressions, String[] dataTypes, String[] lengths, String[] precisions, String[] scales, String[] codePages)
at Microsoft.DataTransformationServices.Design.DtsDerivedColumnFrameForm.SaveAll()
View 3 Replies
View Related
Mar 29, 2007
After opening Management Studio and doing some editing it is possible to copy/paste things in the query editor. After a while (working in another app) I come back to Management Studio and I can't copy/paste anything anymore. If I try to copy from the results window I get an error message that the clipboard operation did not succeed. If I try to copy from the query editor window it just doesn't copy. I can copy/paste in other apps without a problem.
It is not the clipboard getting full but I can't rule out much else.
View 10 Replies
View Related
Mar 31, 2015
We have a rather large environment and have just a couple of boxes out there that we are getting cannot begin distributed transaction on inserts and updates but works fine on selects. Inserts and updates work fine outside the begin tran / commit so it's definitely DTC
We have checked the configuration on and the source box is set to No authentication required same for destination.
We have: Verified credentials running the service, changed them, same problem. Uninstalled and re-installed MSDTC per Microsoft instructions.
Have run all the tools for checking DTC DTCPing etc and followed those procedures which typically in the past has resolved any DTC issues. Other than swapping out the offending pc for a new one we are at a loss.
View 2 Replies
View Related
Oct 17, 2006
This one has me stumped.
I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.
There error generated is:
Server: Msg 16957, Level 16, State 4, Line 3
FOR UPDATE cannot be specified on a READ ONLY cursor
Here is the cursor declaration:
declare some_cursor CURSOR
for
select *
from part_view
FOR UPDATE
Any ideas, guys? Thanks in advance for knocking your head against this one.
PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.
View 2 Replies
View Related
Mar 25, 2008
Hi,
Is it possible to update SQL Server Management Studio 2005?
Thanks for your response in advance.
View 3 Replies
View Related
Feb 29, 2008
I have SSRS in Visual Studio. I created a query that works fine in SQL Server Management Studio, but when pasted into Visual Studio I get the error "An expression of non-boolean type specified in a context where a condition is expected, near '('.
Here is the query. Can anyone help on why this isn't working? Thanks.
SELECT CASE WHEN MONTH(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = MONTH(GETDATE()) AND YEAR(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = YEAR(GETDATE())
THEN dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount ELSE 0 END AS CurrentMonth,
CASE WHEN SubString(dbo.MAS_CCS_GL_Account.Account,1,3) = '400' THEN 'ALEDO' ELSE ' ' END AS Location,
dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate, dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber,
dbo.MAS_CCS_AR1_CustomerMaster.CustomerName, dbo.MAS_CCS_ARO_InvHistoryDetail.DetailSeqNumber,
dbo.MAS_CCS_ARO_InvHistoryDetail.LineType, dbo.MAS_CCS_GL_Account.Account, dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount
FROM dbo.MAS_CCS_AR1_CustomerMaster, dbo.MAS_CCS_ARN_InvHistoryHeader, dbo.MAS_CCS_ARO_InvHistoryDetail,
dbo.MAS_CCS_GL_Account
WHERE dbo.MAS_CCS_AR1_CustomerMaster.CustomerNumber = dbo.MAS_CCS_ARN_InvHistoryHeader.CustomerNumber AND
dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber = dbo.MAS_CCS_ARO_InvHistoryDetail.InvoiceNumber AND
dbo.MAS_CCS_ARO_InvHistoryDetail.SOGLSalesAcct = dbo.MAS_CCS_GL_Account.AccountKey
View 1 Replies
View Related
Jun 20, 2007
I'm having a strange problem with this but I know (and admit) that the problem is on my PC and nowhere else. My firewall was causing a problem because I was unable to PING the database server, switching this off gets a successful PING immediately. The most useful utility to date is running netstat -an in the command window. This illustrates all the connections that are live and ports that are being listed to. I can establish a connection both by running
telnet sql5.hostinguk.net 1433 and
sqlcmd -S sql5.hostinguk.net -U username -P password
See below:
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:25 0.0.0.0:0 LISTENING
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1026 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING
TCP 81.105.102.47:1134 217.194.210.169:1433 ESTABLISHED
TCP 81.105.102.47:1135 217.194.210.169:1433 ESTABLISHED
TCP 127.0.0.1:1031 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5354 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51114 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51201 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51202 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51203 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51204 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51206 0.0.0.0:0 LISTENING
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1025 *:*
UDP 0.0.0.0:1030 *:*
UDP 0.0.0.0:3456 *:*
UDP 0.0.0.0:4500 *:*
UDP 81.105.102.47:123 *:*
UDP 81.105.102.47:1900 *:*
UDP 81.105.102.47:5353 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1086 *:*
UDP 127.0.0.1:1900 *:*
Both these utilities show as establishing a connection in netstat so I am able to connect the database server every time, this worked throughout yesterday and has continued this morning.
The problem is when I attempt to use SQL Server Management Studio. When I attempt to connect to tcp:sql5.hostinguk.net, 1433 nothing shows in netstat at all. There is an option to encrypt the connection in the connection properties tab in management studio, when I enable this I do get an entry in netstat -an, see below:
TCP 81.105.102.47:1138 217.194.210.169:1433 TIME_WAIT
TCP 81.105.102.47:1139 217.194.210.169:1433 TIME_WAIT
TCP 81.105.102.47:1140 217.194.210.169:1433 TIME_WAIT
Amost as if it's trying the different ports but you get this time_wait thing. The error message is more meaningful and hopefull because I get:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.) (.Net SqlClient Data Provider)
I would expect this as the DNS has not been advised to encrypt the conection.
This is much better than the : Login failed for user 'COX10289'. (.Net SqlClient Data Provider) that I get, irrespective of whether I enter a password or not.
This is on a XP machine trying to connect to the remote webhosting company via the internet.
I can ping the server
I have enabled shared memory and tcp/ip in protocols, named pipes and via are disabled
I do not have any aliases set up
No I do not force encryption
I wonder if you have any further suggestions to this problem?
View 7 Replies
View Related
Jan 8, 2008
I imported a SQL Table into SQL DataBase, But I can not update this table even with SQL Server management Studio
When I change any data on mentioned table above, Red exclamation sign appears left of the record .
How can I correct this problem?
Thanks.
View 1 Replies
View Related
Jun 11, 2007
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
dtexec /f "C:Program FilesMicrosoft SQL Server90DTSPackagesIntegration Services Project estcom.dtsx"
pause
Why it's not running with SQL Server Agent???
View 7 Replies
View Related
Oct 9, 2006
Is it possible to run both Sql Server Management Studio: Express and full blown side by side?
I am developing with the full blown product but would like to test Management Studio Express on the same box.
Is this possible?
Thanks
Eric
View 3 Replies
View Related
Apr 5, 2007
I have recently installed the SQL Server Management Studio Express but I do not find Management Tools in order to create scheduled backups and shrinking of the databases. I was under the impression that this should be included in the Management Studio. I use the SQL 2005 Express for smaller customers who run the SQL on a desktop unit. I need a way to backup the data to a server machine for backup purposes. I have uninstalled and reinstalled to no avail.
View 7 Replies
View Related
Jan 8, 2008
I dont find sql management express in the program folder of sql server 2005. i find configuration manager but dont find the sql server management express. If the program is deleted also then the shortcut is deleted but not the whole program.
i can find the files in the respective folders of program files -> microsoft sql server 2005. but dont know which files start
the sql managment express
View 1 Replies
View Related
Mar 17, 2007
I have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
View 1 Replies
View Related
Dec 18, 2007
Hi
I have a DTS to copy data from Oracle to SQL Server. When I logon to SQL Server box with a userID xxx, I can run the DTS from EM and it works perfectly fine but when I schedule the DTS as job, it fails.
SQL Server agent is running with same account "xxx"
DTS connects to SQL Server with sa authentication
Job owner is same account "xxx"
Job error log
Executed as user: DOMAINNAMExxx. ... Drop table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Drop table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnStart: Drop table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart... Process Exit Code 6. The step failed.
I copied the DTS to another one and scheduled it
This time I got the error log
Executed as user: DOMAINNAMExxx. ...... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnStart: Copy Data from SUPPLIER_INFO_ADDRESS to [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnError: Copy Data from SUPPLIER_INFO_ADDRESS to [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step, Error = -2147467259 (80004005) Error string: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. Error source: Microsoft OLE DB Provider for Oracle Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 0 (. The step failed.
Please help!
Thanks in advance
View 3 Replies
View Related
Sep 4, 2007
I am new to visual studio and I am still not sure of all its components and features.
I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?
I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?
I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.
How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.
Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.
My goodness, it seems I still have so much to learn.
Thanks
View 1 Replies
View Related
May 13, 2008
I have created a database under management studio and i want it to be connected in visual studio but it failed
the error msgs said that the database can't be connected coz the database with same name exits but that is not true
View 2 Replies
View Related
Mar 25, 2008
Hi..
I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error
Error: 2008-03-24 13:52:40.22
Code: 0xC0202009
Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.".
I am able to run the package outside the sql job and also connect to the oracle.
I have oracle 9i client installed on the server and sql server is 2005.
Any help would really be appreciated..
View 4 Replies
View Related
Sep 12, 2007
How do i get the database that i am using in visual studio into my SQL server management studio?
i need to create some scripts to create stored procedures on a live server.
View 1 Replies
View Related
Sep 13, 2006
I have installed Visual Studio 2005 which includes SQL Server Express but not the Management Studio.
Can I install SQL Server Management Studio Express?
View 1 Replies
View Related
Mar 4, 2007
I have a query that works fine but fails as a sproc.
QUERY:
SELECT UserName, ProfileId, FirstName, LastName
FROM dbo.CustomProfile JOIN dbo.aspnet_Users
ON dbo.CustomProfile.UserId = dbo.aspnet_Users.UserId
WHERE UserName = 'Brown'
SPROC:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetProfileId]
@UserName nvarchar
AS
SELECT UserName, ProfileId, FirstName, LastName
FROM dbo.CustomProfile JOIN dbo.aspnet_Users
ON dbo.CustomProfile.UserId = dbo.aspnet_Users.UserId
WHERE UserName = @UserName
The query returns results. In SQL Server Management Studio when I execute the sproc and enter the value Brown the sproc returns no values; i.e. 0
View 2 Replies
View Related
Jun 7, 2004
I have a SQL DTS package that imports a text file as one wide column into a two column SQL table, one is an identity seed. So essentially I import then parse the data using the index key as it is 3 seperate lines of data. All works fine by running the DTS package using execute. When I schedule this as a job it fails. It indicates that I have additional white space after a column. Any thoughts on why this can ocurr?
View 4 Replies
View Related
Jan 3, 2007
Hey all. I've got a DTS package that's scheduled to run after business hours on the last day of the month. This package copies some tables from an offsite SQL Server, then runs through a series of SQL Statements and finally exports an excel file with the results.
My problem is that the DTS will run if I manually start it, but the scheduled job always fails. Of course, the error I get is that the job failed at step one, and I have no other info.
I'm not a heavy DBA (mor eon the client app side of things), so I'm unsure as to how I can dbug this. Any help would be greatly appreciated!
View 4 Replies
View Related
Apr 20, 2004
Hey all,
I have created a DTS task that i can right click on and execute and it works fine on the server.
However when i try to schedule the task and run the job from SQL Server Agent, i get the following error.
Error Source= Microsoft VBScript runtime error Error Description: ActiveX component can't create object: 'CuteFTPPro.TEConnection' Error on Line 31
the error occurs on the following line
Set MySite = CreateObject("CuteFTPPro.TEConnection")
How is it possible that i can execute my package but cannot schedule it? i am executing the package from physically sitting at the server.
thanks in advance,
pete
View 2 Replies
View Related
