Dear All,
I have a user with DBOWNER,DBCREATOR role and access is set to deny on viewing any other databases. Now when I connect using this user and try to restore the database. after restore, I can not open it or access it using the same user.
what is causing this.
Thanks,
How do I change the Database owner for a MODEL database?
When I open the properties for a Model database, it shows "UNKNOWN" as the database owner, and I can't run the command 'sp_changedbowner 'sa' as it's not allowed to run on master, model, and tempdb.
Any help?
Hi All
I have my program create and load (restore) a database, then create a login and make it dbowner by running a script like below via OSQL:
EXEC sp_addlinkedserver 'SETUP1myserver','SQL Server'
EXEC sp_serveroption 'SETUP1myserver','DATA ACCESS', 'TRUE'
GO
DROP DATABASE [mydb]
GO
EXEC sp_droplogin 'mylogin'
GO
CREATE DATABASE [mydb]
ON (NAME = N'mydb_data', FILENAME = N'C:AppfolderSQLmydb.mdf' , SIZE = 100, FILEGROWTH = 10%)
LOG ON (NAME = N'mydb_log', FILENAME = N'C:AppfolderSQLmydb.ldf' , FILEGROWTH = 10%)
COLLATE Latin1_General_CI_AS
GO
RESTORE DATABASE mydb FROM DISK = 'C:AppfolderSetupmydb.bak' WITH REPLACE,
MOVE 'mydb_data' TO 'C:AppfolderSQLmydb.mdf',
MOVE 'mydb_log' TO 'C:AppfolderSQLmydb.ldf'
GO
EXEC sp_addlogin 'mylogin','pass1$'
GO
USE mydb
EXEC sp_changedbowner 'mylogin'
GO
This works fine to a point. The program can then connect to the database and carry out normal processing with the "mylogin" user/password but it cannot do administration activities that a dbowner can do.
How do I create a login that does have true dbowner rights?
TIA
Sed Mayne
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
I just restored my SQL server 2000 database on the SQL server 2005. after this i ran the Service broker sample ("Hello World") on this database by changing the AdventureWorks name to the new database name. The "setup.sql" runs fine. When i run the "SendMessage.sql" i was not getting any rows in the output (The message was not getting inserted into the queue). I checked the Service broker is enabled on this databased using the query "select is_broker_enabled from sys.databases where name = 'newdbname' " It was 1. I even tried the ALTER DATABASE SET ENABLE_BROKER. but it didnt work.
When i tried the sample on a newly created database it worked fine.
Is there any solution to make the restored database to work for service broker.
Thanks
Prashanth
hi all,
our datbase was restore but the publications were all gone.
however replication monitor shows publication and subscription.
worst. can create the publication with the same name because
it raises an error saying that it can't drop publication becuase
there is a subscription in it.
how can i remove the publication when the are already gone in the publication
folder but exist in the replication monitor
thanks for the help
Is there a way to restore a 2000 database to 2005?
will the restore process convert automatically to 2005?
Hello!
I am trying to find out name of the backup file database was restored from (I am restoring from DISK), something similar to physical_device_name in backupmediafamily. restorehistory doesn't have this information.
Any advice is greatly appreciated.
Thanks,
Igor
Hi,
I have recently restored a backup of a SQL Server 2000 Database (from my production server €“ which is a shared hosting service) on my dev machine so I can do some testing. The issue I am having is with the permission of objects. Some of the objects were created with the dbo user and some with another login (myLogin). The ones that were created with dbo work fine on my dev machine. The others do not work unless I prefix them with €œmyLogin€?€¦ I get an €œInvalid object name€? if I don€™t prefix them. This is problematic because there are hundreds of stored procs and tables that I would need to modify in order to use them on my dev machine.
Can anyone tell me how to create a new user with the necessary permissions so I can execute my procs and access tables without having to prefix them?
Hope this makes sense €“ please let me know if it doesn€™t.
Thanks,
Mike
Hi
I have an sql server 2005+sp2 instance and a db on it.
I have create a database master key (specifying a password so it WILL NOT get encrypted by the server master key) on my database and backed it up
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'test'
go
BACKUP MASTER KEY TO FILE = 'c:Genesis_DBMasterKey.key' ENCRYPTION BY PASSWORD = 'test'
Then I have created a asymmetic key without specifying a password therefore the key will get encrypted bt the database master key.
CREATE ASYMMETRIC KEY card WITH ALGORITHM = RSA_512
And then for test I run
DECLARE @Encryptvalasym varbinary(MAX)
SET @Encryptvalasym = EncryptByAsymKey(AsymKey_ID('card'), 'EncryptedData')
SELECT @Encryptvalasym
SELECT CONVERT(varchar(max),DecryptByAsymKey(AsymKey_ID('card'),@Encryptvalasym) )
And the result is OK.
Problem: as a recovey plan if I restore the database on the same or other instance (althogh the asymmetic key is part of backup) the decrypt doesn€™t work.
I have tried to create a bank database restore tha databse master key and recreate the asymmetric key, but I€™m afraid I€™m still not having any luck with it, as it does not decrypt.
My main issue is that is any case if I have to recover the database , how do I have to make sure that encryption/Dycription will work?
Thanks
I only have the ldf file and the bak file.
My bak file was current to 3/2/2007
My ldf file was current to 3/25/2007
I do not have the mdf file.
How to I apply the transaction from the ldf file to my resotred database?
Is there any workaround on this? I need to migrate my data in sql server 2005 into sql server 2000. Thanks in advance.
View 2 Replies View RelatedHi I took a Full Backup on Production Server and Restored the Same Database on Testing Server, i am able to see all the Tables Stored Procedure and View except Logins, i am not able to see any logins, there are total 650 Logins under the Database how can i see the logins and how to restore the logins, while i am trying to create any logins it is saying Error Occured login is already existing in the Database..
Bye,
Madhavi
Hi All,I have to a few backups restored from a set of backup files. Thebackup files have been removed from the drive because of some storageconstrains...For some data comparison reasons, I need to figure out the actual dateof these backup files that is used to restore these databases. Isthere any system table I can query to figure the actual backup timesof these databases...Any help will be much appreciated.. Thanks in advance.- Aravin
View 1 Replies View RelatedThanks in advance for help.
Could someone please help me for SWL backup restoration and db by user
I restored SQL 7.0 database to SQL 2000. ( by creating empty db on SQL 2000 and restored from SQL 7 backup) -- restore ok..
I need to use same SQL user which is admin for DB on SQL 7, for SQL 2000 also. ( DB user is sql user not domain user)
I put mixed authentication mode ( windows and SQL) in SQL 2000 enterprises manager security tab setting.
I can see DB user is available in DB user list on restored DB but can not access DB when I try to access from query analyser
I tried to create new login with same name as it was in SQL 7 and tried to give full admin access on SQL 2000 enterprise manager but I get error 21002:[ SQL DMO] User 'user' already exists.
Kind Regards
Sunod
I restored a backup of a replication database named "distribution" to a non-replicated development instance (ss2000). Well, when I try to drop the database I am told I can not because it is used for replication. It isn't. But you now how Microsoft is . . . . So the question is: how do I drop the database without rebuilding the server, or jumping through firery hoops????
Thanks!
Scorched
I have a SQL 2k database backup and I restore it in sql server 2005.
Is this now a SQL Server 2005 database or a 2K database in a 2005 server.
Means do I need to convert databases somehow when I migrated from 2000 to 2005. Is the above mentioned way a way to migrate... or are ther some conversation tools.
Any help / links / ressources would be Great...
Felix
We have a log shipping database running on SQL 2000 ENT SP4, the secondary DB is in standby/read only mode . we have a job that runs every day to take it offline, make a copy of the files and attach them as a new database for reporting purposes.
We're planning to upgrade to SQL 2005 however, when we copy the Standby/read only database files and attach using "CREATE DAABASE FOR ATTACH" we get :
msg 1284
Cannot attach a database that was being restored.
this works in SQL 2000 but not SQL 2005, is there a way to force attach the DB ?
Thanks.
Hello,
View 10 Replies View RelatedI need a SQL query which lists out directory path from which the database has been restored recently ( i.e backup path ).....
View 2 Replies View RelatedDoes anyone know how to change the database owner to sa (dbo)?
View 2 Replies View RelatedHow do I loop through a database and display all the table name in it
then use
SP_ChangeObjectOwner "TABLE_NAME","dbo"
where table_owner is OBI
In a nut shell, how do I loop through a database and isplay name ?
HiWe have a script that allows customers to change the users of thedatabase including the database owner. This script can be run at anytime. However, sometimes (and it really is only sometimes!) when thefollowing statement executes:"exec sp_changedbowner @USER_OWNER"the following error is reported:"The proposed new database owner is already a user in the database."I have checked the other postings and the Books Online but cannot finda way to query the current name of the dbowner i.e. the value of@USER_OWNER above. We have to be able to do this within the script sothat if the @USER_OWNER variable is already the dbowner we do notbother to execute the statement as otherwise this could display theerror. Can anybody help?Thanks in AdvancePaul
View 5 Replies View Related
our application user is a db owner and my auditor has asked me to change the permission.
what permission should be give for the application user who can access all the schema. create temprorary table and drop
tables.
Without giving dbowner how can we grant permission to user to alter/create procs?
View 3 Replies View RelatedWe have been asked to look into using stored procedures with SQL Server 7.0 as a way to speed up a clients site. 99% of all the articles I have read along with all the books all say Stored Procedure should be used whenever possible as opposed to putting the SQL in your ASP script. However one of my colleagues has been speaking to Microsoft and they said that that they were surprised that our client wanted to use Stored Procedures as this was the old method of database access and that now he should really consider using COM objects for data access as itis much faster. Has anyone got any views on this or know of any good aticles regarding this matter ?
View 1 Replies View RelatedHi,
Can someone help me, I have this DB that needs to be restored. I have the full backup and the differential backup.
When I'm trying to restore my differential backup it prompts me this error "System.Data.SqlClient.SqlError: The log or differential backup cannot be restored because no files are ready to rollforward. (Microsoft.SqlServer.Smo)".
Then I try to create a test DB and restore my full backup there, it was succesfully restored and now try to restore my differential backup since I need the newest backup I received that error. I have already used the option leave the database non-operational but still the same.
Thanks.
Russell
I have recently upgraded to SQL2014 on Win2012. The Access front end program works fine.
But, previously created Excel reports with built in MS Queries now fail with the above error for users with MS 2013. The queries still work for users still using MS 2007.Â
I also cannot create any new queries and get the same error message. If I log on as myself on the domain to another PC with 2007 installed it works fine, so I don't think it is anything to do with AD groups or permissions.
Hello.
View 5 Replies View Related
I need to determine the following about the current authenticated Windows domain user who is trying to access a SQL Server via a trusted connection.
1 Has the current user been granted login access to the trusted SQL Server?
2 Has the current user been granted access to a specific database?
3 Is the current user a member of a specific database role such as (DB_ROLE_ADMINISTRATORS)?
Thanks,
Sean
Hi
If I dump a replicated Db and restore it onto another DB, how do I switch off replication from the restored DB. I believe there were some scripts developed for this in 6.5.
Any suggestions will be appreciated.
Rich
I have 2 SQL Servers 7.
DBs on the first were upgraded from 6.5.
A DB has 2 users: dbo + user1. User1 is also uses user1 login
I created a DB backup on the first server copied it on the second & restored on the second into existing DB.
The problem is that after that user1 is not in the list of the restored DB on the second server & I can not
include it in the DB & grant access to user1 login to the same DB
and error message is
"15023 User or role "user1" already in exists in the current DB.
Hello,
Im running SQL 7.0 in production with no SQL service pack applied. I am trying to copy the database over to a test box running SQL 7.0 SP3. Both servers are NT 4.0 with SP6.1a. When I restore the database on the test box, I do not get the Users restored but I do get the Tables and other items. The SQL backup Im restoring from is a complete backup. Could the fact that the server Im restoring on is SQL 7.0 SP3 and it came from a pure SQL 7.0 server?
Thanks