Does anyone here know anything about the DCS Scripting Language.
A contract vacancy has arisen using this language but I've never heard of it and there does seem to be anything on the internet about it. Can anyone help?
Hi to all
Is there any option in sql server DTS or any other third party tool that can script data. By scripting data i mean that....
if a table "Employee" contains 50 rows, i want the tool to write 50 insert queries for me so that i can run in it anywhere.
Problem is i have to insert data in a remote server where i cannot use DTS. I just have a text area to write my query and press the run button..
Hope u understand my problem. In case of any explanation please reply. Waiting for your response. Thanx in advance.
by to all
Hi folks;
I have just realised that my language problem is because DB language; then I've changed the language to Turkish but it didn't effect tables.. When I wanted to change tables manually it worned data loss may occur..
What would you suggest to do it?
Thanks
Hi
I am using SQL server 2000 as backupend...
Pls suggest which language is used as frontend...
(web)
thanks
asm
i am went Language arbic fram windows xp media center edition 2005 modil number 1252736 please
..............................tomorrow
SQL 7
I am trying to run a script written for an asp page (pure vbscript) in a active script job. I am getting errors on:
Server.CreateObject("ADODB.Connection")
Yes, ADO is up to date and loaded. The error says
Error Code: 0 Error Source= Microsoft VBScript runtime error Error Description: Object required: 'Server' Error on Line 14. The step failed.
Thoughts ..
Craig
I know it's a simple question, just can't figure it out:
How do I script a new column into an existing table in SQL? I am using MS SQL 7.0 and need to create several new columns in existing tables.
thanks all.
Does anyone know how to prevent or change the
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
that appear between each Create? I can't see any options for changing then or eliminating them when generating the SQL Script for my stored procedures.
Thanks,
Scott
I have to come up a script that will be going across 60 different servers that will be looking for document type that are not being used across all servers and then deleting them.
To start with:
Select Enabled from MHGROUP.CUSTOM5
where Enabled ='N'
then delete records
and where would I run this type of script or should I say can this be done?
Thanks
Anyone know how to write a script for sql 6.5 that identifies what column is a primary key on a table? (INFORMATION_SCHEMA doesn't exist) Thanks for the help in advance.
View 10 Replies View RelatedWhat I need to do - can it be done without scripting?
1.) I need to get a list of sp's from a table (EXEC SQL task)
2.) Next, loop through the list of sp's and execute (FOREACHLOOP)
3.) Then, write the output of each sp to a uniquely named file. (DATA FLOW task)
So far, I have had success with 1 and 2. But getting the DATA FLOW task to work has been imposssible thus far.
I tried everything I can think of. I even created a child package that gets called from the FOREACHLOOP, using a Parent Variable Configuration to pass down the name of the stored procedure variable to the child package. No dice.
I am ready to throw in the towel here.
So, my question is, can what I want to do even be DONE without scripting? I was trying to avoid the "manual" approach to this project. It seems like what I want to do "should" be so simple.
In sum, I am simply trying to read a list of sp's from a table, execute the sp's, then write the output of the sp's to a uniquely named file.
Can this be done without scripting? I am beginning to think NOT.
Sigh. This is driving me crazy.
Please, any advice!!
Thanks
Hi Gurus/MVPS:
Can you please share or show me the code for scripting out stored procedures in SQL Server 2005 using SQL Cmd?. I need to perform the following:
1). Script out the text of the stored procedure
2). Output to a sql file (text file) under some directory like C:sql
3). Import the file into the destination db and run it.
The above three need to be automated in a DTS Package. I tried to use the DMO but my source server is a SQL2k5 and so DTS desginer does not let me use the ActiveX with DMO against SQL 2k5. I need to run the first step against a SQL2k5 machine and the second and third on a SQL2k machine.
Please help!!!.
Thanks
Ankith
Hi;
I need Turkish characters in my DB therefore I have to change Collation from SQL_Latin1_General_CP1_CI_AS to Turkish
But what I realised is that aspnet membership tables' collation is SQL_Latin1_General_CP1_CI_AS as well and they can store Turkish chars but why not my tables?
Thanks..
I want to insert data into my database in greek language but i am getting some "???????" symbols. I have a table called "Words" with columns "Word"-as char and "Result"-as int. Can somebody please explain me what to do?
Thanks, Mike
I am looking into a production geared software called MassGroup. (www.massgroup.com) It says that its FactoryServer builds are on a standardized SQL framework and web architecture for data collection, work order requests, reporting and asset management. My questions are:
1. Is SQL its own programming language? If not what is it?
Answer: After going thru several pages and reading the fine print I discovered they use VB, ASP, COM technology, and Crystal Reports.
2. How powerful do you think this would be at gathering data and does it have the capability of creating a number sequence automatically? (example: 0001; 0002; 0003...)
Any help would be appreciated.
Thank you in advance!!!!!
Good morning. I have an interesting scenario where one of the requirements of the application is to translate an application to different languages. Modelling the system to translate the UI went over without a hitch, however, we have now been told that the application will need to translate all the existing database tables. Has anyone ever had to do anything like this?
I was curious if anyone out there has any suggestions on how to approach this issue... ways in which it could be modeled, alternative approaches, anything at all would be appreciated. Many thanks in advance!
Just curiosity ... never pick up this since beginning. Our box is setted the language to English (United States) while the local machine setted as English (Australia) which I thought it's corresponding to locale machine not sql box.
Will this language setting effecting date issue stuff (DD-MM-YYYY)? Can someone clarify on this?
This thing brought up my attention cause we've just ran a trace and there is a warning which is:
User Error Message - Changed language setting to us_english.
Thank you.
Hi all,
i need to store russian data in sql server db but i found the russain data appeared as odd character in the table, can sql server support it or is there other solution for it? thanks!
How could i do if i need to use another language, unavailabel in collation such as laos, burma ?
View 2 Replies View Related
hey all
I am using Reporting Services 2005 and Microsoft Updates has been run on my machine.
All my reports were set on the above =User!Language and my regional settings to NZ - others to US etc and they
all worked fine until today!
If Sql P2 was run has anyone else struck this? and do you think this is the cause? the other updates were mainly XP.
Anyone have any ideas of what I can do now?
thanks
Dianne
i need to know in which language the standard SQL is implemented.. and that from where can i get the code.. i need the code for the "logical operators" of SQL.
Plz help..
Hi there,
I need help about storing data in chinese, arabic, english..... languages in one database. For that I create Database with Latin1_General_CI_AS and I have table Testing with two columns wich are LangName= nvarchar(50), and Comment = nvarchar(MAX). I tried to store comment in chinese language but I could not, when I entered the data "個編碼å?¯ä»¥åŒ…å?«è¶³å¤ çš„å—元：例如，單單æ?å·žå…±å?Œé«”就需è¦?好幾種ä¸?å?Œçš„編碼來包括所有的語言。å?³ä½¿æ˜¯å–®ä¸€ç¨®èªžè¨€ï¼Œä¾‹å¦‚英語，也沒有" it converted as ? sometimes or look as a square.
thanks
I just starting working for a new client this week. They have a custom install program written in VB.NET which installs the database to SQL Server 2000. Normally, when I want to create a SQL script to create a database, I would go into Enterprise Manager, right-click on a database, and select All Tasks | Generate SQL Script. However, that's not how this client works. Much to my horror, the CREATE DATABASE, CREATE TABLE, etc. statements are both hard-coded and hand-coded within the install program itself. When I asked them why they weren't using SQL Server's scripting capabilities to automatically generate the script, they said that SQL Server scripting is buggy and that it doesn't work properly. It was hard getting specific details but they said it would leave out indexes, for example. Now, I'm no SQL Server expert, but I've never had a problem using SQL Server's scripting capabilities. The database they use isn't that big - maybe 20-30 tables. So, before I make an issue out of it, I was wondering what everyone else's experience with SQL Server 2000's scripting features? If you've used SQL Servers scripting to recreate a database, does it work? Did you have issues?
View 6 Replies View RelatedCan you write a script that compares table changes. I have a testing database with a bunch of table changes that i need to move to production and instead of handtypeing the changes in I was wondering if there was a method of creating a script.
View 1 Replies View RelatedHi,
Just getting into scripting sql. I have a little script that adds and drops a default value for a column. But I cannot get it to run when the column already has a default value specified. If I didn't script the contraint and specify a name I have no name to specify when trying to drop it.
ALTER TABLE users ADD CONSTRAINT dev1 DEFAULT 1 FOR ns_email_flag
ALTER TABLE users DROP CONSTRAINT dev1
How do I remove any existing default values using script?
TIA,
Seoras.
I am currently running SQL7 sp3 and will be moving the database to SQL2k. I have restored the database without any problems, but have not moved the dts packages. What would be the best solution: script the packages, save the packages to the 2k db, or just build from scratch? Any feedback would be appreciated. Thanks! -J-
View 2 Replies View RelatedI would like to move over all of my DTS packages and corresponding jobs onto another MS SQL server machine. The problem that I have is that I haven't been able to find any straight-forward info on how to script up these jobs, move them onto another machine and execute them. I have scanned through previous posts written by people with the same problem, but every response is simply "script up the jobs and move them onto another server." Maybe I'm missing something, but how "exactly" do I get a job to show up on this destination machine in EM, in the management/sql server agent/jobs folder. I did the jobs/all tasks/script job... but then what? I saved it on this destination machine, but am unclear as what to do next. The MS SQL Server Administrators companion book is of no help on this subject, and I do not understand how this simple task can be so confusing and is not documented. Any help would be greatly appreciated.
Thanks in advance!
TB
Many times here I have read about scripting DTS packages to copy them to another server. How is this done? Under "All tasks/Generate SQL Scripts" there is no option for DTS. Sould I be looking elsewhere??
View 2 Replies View RelatedI know there must be a way to script GRANTS for all users for specific objects(tables, sp's, etc). Can't find much in BOL, etc. Does anyone know how?
Any comments would be appreciated.
How can I get a script of triggers (drop & create them) without scripting the tables with them ?
Thanks!
Is there any way to script DTS Packages? :confused:
View 1 Replies View RelatedAre you kidding me?
I can't create 1 object per file anymore AND I can't have the drop created along with the create
Are they forcing you to use ALTER?
What a piece of junk
Hi all,
Is there any way to script all the triggers in a database just the way we script tables and stored procedures?
currently I am using the system tables.
regards,
Harshal.