Hi, I am web developer. But for the last few weeks i have been working on SQL2005. I actually exported data from a table (SQL 2000) into the Excel sheet and then i have been trying to import data from Excel sheet into another table(SQL 2005). For this i had created SSIS package successfully. I had added this into integration services project(MicroSoft). After pressing CTRL+F5. I am repeatedly getting the following error DTExec:The Package Execution returned DTSER_FAILURE<1> Please help me because requirement is urgent.
Because of aleatory problems some of our Analysis Services Tasks fails and sometimes success with not know reasons. You run the task and it fails, the next time it fails, the next time is success, and so on aleatorily.
The solution of this is to put those tasks in a loop (ore someting similar) that only ends if all of the Analysis Services Tasks succeeds. If not, those tasks starts again. Do you know what I mean? How can I build this? I have investigated with checkpoints, with For Loops ... but still I dont find the way to do it.
Does anybody can help me? I suppose it's not so difficult, but I'm stuck in finding the solution...
I have an ssis package with three tasks. I want to force the execution result of the package to success all the time. I execute the package from a .net application. I tried to place my tasks in the package inside a sequence container and created a new script task which would execute when the any of the tasks in the container failed. I am setting the result of the package to success in this script task. This is not correctly working for me. Even if one task in the package failed and the last script task went to success, the .net app is receiving a failure status. Is there any way to handle this in the ssis package than in the .net app. There might be an easy way, but I am unable to find it.
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client. But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
I want execute package with SQL Server Agent. I create a job and I try all the solutions : my job doesn't want to work.
I success to launch the package but the execution failed.
I try the same job launching from the server : it doesn't work either.
So, I copy the command line (/FILE, /DTS or /SQL) and with DTEXEC utility it works when this command is executed on the server (on a client computer, the problem "the product level is insufficient" appears).
Why is it working with this utility and not with a job ?
I try to change every secured option (credential --> proxy --> Run as ; change the owner of the job ; etc.)
I am finishing a port of a project that was done with RS2000/AS2000/DTS2000. The cube process is triggered remotely by a Korn Shell script from Services for Unix that runs a DTS package:
I have finished porting the AS and RS parts to their 2005 equivalents and now I am trying to get the cube processing converted. I have built a SSIS package that processes the cube and I have deployed it to the SQL Server in MSDB. When I am logged on to the SQL Server box directly, I can execute the package via the Management Studio and from the command line via:
When I try to register the SQL Server in Integration Services from my client PC Management Studio it fails with "Access Denied". When I try to run the dtexec from my client PC it fails with "Access Denied".
I have walked through Kirk Haselden's instructions at:
(adding myself to Distributed COM Users, noting the correct DCom Config settings for MsDtsServer and restarting the Integration Services service) and the problem is still not resolved. I have posted to the DTS group on Technet and now I am posting here. This can not be run scheduled by SQL Agent as it needs to be triggered by other load/postload activities. Are there any other fixes for this problem that I can try?
Thanks,
Keehan
By the way, being able to have all the parts of this project in one dev environment is great. The previous application was developed in 3 separate locations which was pretty clunky.
Hi, I have a problem with my SQL 2005 Transactionlog backup. I get an error on the schedule job:
Message Executed as user: TNETsqlservice. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 01:00:00 Progress: 2008-02-15 01:00:02.56 Source: {8277BBE5-6B5E-44D1-9221-17442AB5C857} Executing query "DECLARE @Guid UNIQUEIDENTIFIER EXECUTE msdb..sp".: 100% complete End Progress DTExec: The package execution returned DTSER_FAILURE (1). Started: 01:00:00 Finished: 01:00:03 Elapsed: 2.813 seconds. The package execution failed. The step failed.
but the job goe's trough and the full backup is ok. The version I have is 3042 and sp2. Doe's anybody regognize this?
I have a manager SSIS package that calls a generic loader SSIS package, via the 'Execute Process Task'. The manger package (amongst other things) creates a config file and and then executes DTExec passing the config specification in the Arguments property, i.e. '
It works as expected, but, I always get the warning message 'File/Process "DTExec" is not in path.', I know that it is because the exe runs and loads the correct package which then performs the correct actions.
Have I dropped the ball here? I cannot see any reason for the warning as DelayValidation==True, I could set RequireFullFileName==True, but I do not know where SQL is installed on the various nodes.
I have a serious problem with my SSIS Package while executing using 32-bit DTExec and 64-bit DTExec.
Here are the details:
Environment:
Windows Server 2003 64-bit (Build 3790: Service Pack 2) SSIS 32-bit & 64-bit installed SQL Server 2005 (Microsoft SQL Server 2005 - 9.00.1399.06 (X64) - RTM)
SSIS Package details (compiled in 64 bit)
Script tasks only Microsoft Visual Basic .NET (using TRY...CATCH block) PreCompileScriptIntoBinaryCode = TRUE Run64BitRunTime = TRUE
Execution
Batch file that uses DTExec to execute the Package.
SCENARIO I am trying to exeucte the above SSIS package using both 32-bit and 64-bit DTExec to make it failure by providing invalid connection string. Here are the details,
Wrong connection String using 32-bit Execution
While establishing the connection the error message has been nicely captured in to my Exception block and writes into the log file.
Wrong connection String using 64-bit Execution
While establishing the connection the error has not been catpured anywhere (although I have TRY CATCH block) and it haults there itself with the message "Process is terminated due to StackOverflowException". Later I found that the error is due to the connection string along with the unhandled exception.
Please suggest any one of the following my findings, also if you have any other advice would be very much appreciated.
1. Shall I go ahead and fix the issue by handling those unhandled errors? (e.g Appdomain, application). I tried several but still not working using 64-bit DTExec.
2. Shall I go ahead and use 32-bit DTExec to execute the package? If so, is there any other major issue...like performance or anyother bug?
P.S: We cannot apply any service pack for SQL Server 2005 at the moment. Sorry abt it. If you have any specific hotfix for DTExec (without affecting SQL Server) then we can decide.
Sorry for the lengthy one and Thanks very much for you help in advance .
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Our SSIS packages use the Web Service Task to call services to send email and write package failure data to a department wide database. These Web Service Calls are failing with HTTP 401 errors. It was caused by the passwords for the HTTP connections not being saved when the SSIS pkgs were saved to .dtsx files. I have tried saving the package with a password and the EncryptSensitiveWithPassword protection option. This password can be supplied when the package is called from another package or a package is executed in Visual Studio but cannot be supplied to DTexec to execute the package in a job. DTexec does have a /Password parameter but it is rejected if the package is loaded from a .dtsx file. This appears to be a bug in DTexec. It only accepts the /Password parameter when the package is loaded with the /SQL option. Specifying /Password and /File is not supported.
Is this a known bug? Are there any workarounds? Has anyone successfully called a Web Service from SSIS executed via DTexec?
I am writing a package that i want to have email me on two possible success scenarios.
essentially, this is the conditions:
IF @result = 0 BEGIN EXEC master..xp_cmdshell @copyfile, NO_OUTPUT PRINT 'Operation Successful' END ELSE BEGIN RAISERROR ('This operation failed. Error Code:01. The source and destination files are identical.', 0, 1) END
If the first condition is met, I want to fire off an email stating success. If the second condition is met (the RAISERROR) then i want to fire off a different email.
Now, the problem is, I am not sure how to flow it. Both conditions are successful, thus it always fires off the success email if i use an "On Success" flow.
How do i capture the RAISERROR before the email to tell it which email to send?
I created a SSIS package that imports a file then moves the file to a folder called processed. I created a job that runs the package. The pack works fine when I run it from the SQL Storage Area. When I run the job I get the following message:
Started: 9:58:15 AM DTExec: The package execution returned DTSER_SUCCESS (0). Started: 9:58:15 AM Finished: 9:58:21 AM Elapsed: 6.047 seconds. The package executed successfully. The step succeeded.
showing that the job supposedly completed successfully.
I know that the package the not run because the data did not get imported and the file did not move.
Can anyone explain the package may not run but we still get a job completion status of success?
I've created a simple package that contains only one task that is an execute sql task. When I run only this single task from Business Intelligence development studio it runs successfully. But when I run the whole package (also from Business intlligence studio), the package fails.
The data source I access is ODBC. I'm sure the real reason for the error is the bad ODBC driver of the data source but this can't be changed. So I need to know what is different from running only a task in a package to running the whole package. If I knew that I might be able to adjust some setting and make it work.
I'm debugging a SSIS package in Visual Studio and I have a task that failes but the overall package is reporting success. The deployed package in SQL2005 is doing the same thing.
Task failed: FactVisitApplicationInventory
SSIS package "PACE to PACE DW PROD.dtsx" finished: Success.
The program '[4652] PACE to PACE DW PROD.dtsx: DTS' has exited with code 0 (0x0).
I have set FailPackageOnFailure=True, FailParentOnFailure=True, and MaximumErrorCount=0 on this task and am executing just this single task in Studio and I can't get the Package to report a failure.
Hi, I have a package which has 2 file system tasks and 2 data flow tasks all in a for each loop container. if i execute the package from the development studio its executes fine but when i try to run it from the command prompt using the dtexec utility..it just runs upto the first data flow task and then it hangs unexpectedly. Any help on this would be really appreciated.
both variables as you can see are in the top level. the problem is that ChannelCode is string but Status is Integer. if I take out the /SET Package.Variables[Status].Value;1 part from the command line it will work fine. I think th eproblem is down to diffenrt types of variable as there are two types of String and Interger.
any ideas on what the problem migth be. p.s. I am runnning SQL server 2005 Dev edition (without any SP) Cheers
I created a package and stored in SQL server. I am running it as follows
master.dbo.xp_cmdshell dtexec /sq "ABC DEF GHI" /ser "Prod" ABC DEF GHI --> is my package name. When i run this from a job, it runs without error but when i run the above sql i am getting error as
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near '/'. Am i missing some thing, please advice. Is that the problem between spaces in the package name?
Hi everybody. I'm trying to run a package, stored in MSDB, using dtexec utility from cmd. I do this using "dtexec /sq Main_Package /ser local /user sa /Password Oracle"
But all I got is: Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:14:15 Could not load package "Main_Package" because of error 0xC0014062. Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed. Source: Started: 12:14:15 Finished: 12:14:34 Elapsed: 18.297 seconds
It runs perfectly from "Integration Services" directly(SQL Management Studio), but not from cmd. I tried to run it withuot login and password, the same result
I have a file-deployed package which I need to call N times at once using DTEXEC. When I attempt to execute N instances of the package, the second instance doesn't execute. I can execute different packages at the same time, but never the same package more than once. Does anyone know how to get this scenario working? Just to clarify a bit more - I can call the package as many times as I like as long as I wait until the previous run of DTEXEC is finished. Please help!
I am executing a package via vb.net with package.execute using the IDTSEvents interface inheriting DefaultEvents. I am trying to emulate DTExec functionality. The package runs fine and I am catching events, but I don't get nearly as many info and progress events as are put out by DTExec. From my understanding DTExec also used the managedDTS application object, is that not the case? If it uses this does anyone have an ideas on how it is grabbing more events? For example I don't get these events that DTExec shows ..
Info: 2006-09-26 14:22:27.97 Code: 0x40016041 Source: DWB02130 Description: The package is attempting to configure from the XML file "D:SSISConfigurationsDatabase.dtsConfig". End Info Info: 2006-09-26 14:22:28.05 Code: 0x40016040 Source: DWB02130 Description: The package is attempting to configure from SQL Server using the configuration string ""Configurations Database";"[dbo].[SSISConfigurations]";"DWB02130";". End Info
I also don't get as many progress updates during validation, I basically get 0 and 100% while DTExec shows several 1%, 3%, 10%, etc.
Here's is the situation : I have a script component that uses the aspnet membership provider to create users from a csv file in an aspnetdb database. In my Business Intelligence Developpement Studio (BIDS) everything works well. I added the aspnet membership provider in DtsDebugHost.exe.config and when I run the package from the BIDS it does what it have to do.
The problems begin when I deploy the package in file system as well as in sql server. When I run it doesn't use the DTExec.exe.config to find where are added the membership provider. If I refer to that post : http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=541086&SiteID=1 When I run the package from SQL Server it should use the DTExec.exe.config as an app.config for my script component. But it doesn't use it at all and stop with an error that have nothing to do with that. I'm sure that it doesn't use because even when I have a wrong DTExec.exe.config it shows the same error.
If some one knows something about that it will be really great. I need to force my package when it's in stored packages to use one of the *.config as an app.config file.
It looks like you can run an SSIS package via the DTEXEC command. You can also specifiy a configuraiton file flag on the command. Is there anyway to specify a configuraiton filter if you stored it into a table vs and xml file?
I'm having an odd issue trying to run an SSIS package on a 64 Bit SQL 2005 SP2 (build 3042) Windows 2003 SP2 64 bit AMD Cluster. I have to use the dtexec cmd line utility from SQL Server Agent because I need to connect to an Access database. When running the package from dtexec, it doesn't seem to be able to load the package, i keep getting this error:
Executed as user: USSI-CORPsql02admin. ...00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:56:00 PM Error: 2008-03-03 13:56:01.28 Code: 0xC0010018 Source: {DFBF51D9-DF81-41B9-9370-9DFC68E28FBA} Description: Error loading value "<DTSropertyExpression xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:Name="Subject">@[User::vString]</DTSropertyExpression>" from node "DTSropertyExpression". End Error Error: 2008-03-03 13:56:01.28 Code: 0xC0010018 Source: {DFBF51D9-DF81-41B9-9370-9DFC68E28FBA} Description: Error loading a task. The contact information for the task is "Send Mail Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2008-03-03 13:56:01.53 Code: 0xC001000E Source: TestMsgBox Description: The connection... Process Exit Code 1. The step failed.
The @[User::vString is a string variable in the package, and this particular package is actually just using the SendMail task without using an Access DB, as i'm trying to just get the dtexec utility to work. I believe i'm either doing something wrong or have found a bug, as i've used this in the past at another company without any issue.
Here's the cmd line that I'm using (I'm using the 32 bit version of dtexec): E:Progra~1Micros~190DTSBinndtexec.exe /SQL "TestMsgBox" /SERVER D1PSQL02V /CHECKPOINTING OFF /REPORTING EW
We have a problem with visual studio. It hangs when i use the "execute package" option. New packages are running correctly but the packages which i've already built are not executing anymore...Any ideas to get things on track again?
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too. Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE: Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM Error: 2008-02-22 13:29:54.96 Code: 0xC0011007 Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65} Description: Unable to load the package as XML because of package does not ha ve a valid XML format. A specific XML parser error will be posted. End Error Error: 2008-02-22 13:29:54.96 Code: 0xC0011002 Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65} Description: Failed to open package file "'C:ProjectIntegrationServicesSFR IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci fied path is invalid.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage o r the XML file was specified and has an incorrect format. End Error Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices inpkgSFRLocation.dtsx'" because of error 0xC0011002. Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie d path is invalid.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of eit her providing an incorrect file name was specified when calling LoadPackage or t he XML file was specified and has an incorrect format. Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65} Started: 1:29:54 PM Finished: 1:29:54 PM Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
I have a package that executes fine in BIDS. However, when calling it using xp_cmdshell it cannot find the path to the source flat file. Anyone have any suggestions?
Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. NULL Started: 9:50:56 AM Progress: 2006-02-10 09:50:57.40 Source: Data Flow Task Validating: 0% complete End Progress Progress: 2006-02-10 09:50:57.40 Source: Data Flow Task Validating: 50% complete End Progress Progress: 2006-02-10 09:50:57.42 Source: Data Flow Task Validating: 100% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Validating: 0% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Validating: 50% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Validating: 100% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Prepare for Execute: 0% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Prepare for Execute: 50% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Prepare for Execute: 100% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Pre-Execute: 0% complete End Progress Warning: 2006-02-10 09:50:57.43 Code: 0x80070003 Source: Data Flow Task Source - NATNLACCTS [1] Description: The system cannot find the path specified. End Warning Error: 2006-02-10 09:50:57.43 Code: 0xC020200E Source: Data Flow Task Source - NATNLACCTS [1] Description: Cannot open the datafile "Q:BINATNLACCTS". End Error Error: 2006-02-10 09:50:57.43 Code: 0xC004701A Source: Data Flow Task DTS.Pipeline Description: component "Source - NATNLACCTS" (1) failed the pre-execute phase and returned error code 0xC020200E. End Error Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Pre-Execute: 50% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Cleanup: 0% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Cleanup: 50% complete End Progress Progress: 2006-02-10 09:50:57.43 Source: Data Flow Task Cleanup: 100% complete End Progress DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:50:56 AM Finished: 9:50:57 AM Elapsed: 0.985 seconds NULL
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
