I HAVE an SSIS Pkg that gets data from lotusnotes into SQLS ERVER 2005. This SSIS Pkg works just fine, when I run it from manually from Visual studio environment. However, when I run this as a dtsexec from command line it fails with the foll error" The product level is insufficient for component "DataReader Source(1). The dtexec command I use is :
dtexec /f "c:
otesPack.dtsx"
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
Hi,
I need to run a package wich is located on the file system of a PC. The problem is that the PC from where I'm running a bat file to call the package from the other PC where the package is, doesn't have SSIS.
So I was wondering if this will work. I believe that I will have to copy the DTExec.exe file to the PC where my bat file calls to the dtsx in the other PC. I am right?
My run.bat will have this line: \PCshared_folderpackage.dtsx.
Will this work?
Thanks
I'm trying to call the SQL 2012 SSIS packages deployed in SSISDB from batch files from another client system. But I couldn't find the DTExec.exe file in the 110Binn folder. How can I install this utility? Can I get this utility with client installation or do I need to install Server components which need license. I donot have license to install server component. how to install the DTExec utility without any licensing and provide me the Setup link where I can download and install.
View 0 Replies View RelatedWe run the SSIS through tidal scheduling agent using the dtexec utility. We want to see the number of rows transfered while running or after it has run our package. We require answers for the following:
1) How to see the number of rows transfered while running the package using dtexec utility
2) what parameter should be used in dtexec command line to get the number of rows transfered in the Log file after execution.
Thanks
Subhash Subramanyam
I have this problem executing an SSIS pkg using dtexec.
dtexec /f d:smappsssis_pkgsdts_SOAR.dtsx /REP E
Code Snippet
Started: 10:28:58 PMEnd Error
Error: 2008-03-03 22:28:59.00
Code: 0xC0202009
Source: dts_SOAR Connection manager "SourceConnectionExcel"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-03-03 22:28:59.00
Code: 0xC020801C
Source: Data Flow Task Source - CHANNEL_DATA [1]
Description: The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009.
Code Snippet
However, it runs fine when I double click the package and execute it using the Execute package utility. That really puzzles me.
The package transfers data from worksheets in excel to SQL Server 2005 DB.
Both source and destination are on the same system.
Please advise.
Hi,
I have stumbled on a problem with running a large number of SSIS packages in parallel, using the €œdtexec€? command from inside an SQL Server job.
I€™ve described the environment, the goal and the problem below. Sorry if it€™s a bit too long, but I tried to be as clear as possible.
The environment:
Windows Server 2003 Enterprise x64 Edition, SQL Server 2005 32bit Enterprise Edition SP2.
The goal:
We have a large number of text files that we€™re loading into a staging area of a data warehouse (based on SQL Server 2k5, as said above).
We have one €œmain€? SSIS package that takes a list of files to load from an XML file, loops through that list and for each file in the list starts an SSIS package by using €œdtexec€? command. The command is started asynchronously by using system.diagnostics.process.start() method. This means that a large number of SSIS packages are started in parallel. These packages perform the actual loading (with BULK insert).
I have successfully run the loading process from the command prompt (using the dtexec command to start the main package) a number of times.
In order to move the loading to a production environment and schedule it, we have set up an SQL Server Agent job. We€™ve created a proxy user with the necessary rights (the same user that runs the job from command prompt), created an the SQL Agent job (there is one step of type €œcmdexec€? that runs the €œmain€? SSIS package with the €œdtexec€? command).
If the input XML file for the main package contains a small number of files (for example 10), the SQL Server Agent job works fine €“ the SSIS packages are started in parallel and they finish work successfully.
The problem:
When the number of the concurrently started SSIS packages gets too big, the packages start to fail. When a large number of SSIS package executions are already taking place, the new dtexec commands fail after 0 seconds of work with an empty error message.
Please bear in mind that the same loading still works perfectly from command prompt on the same server with the same user. It only fails when run from the SQL Agent Job.
I€™ve tried to understand the limit, when do the packages start to fail, and I believe that the threshold is 80 parallel executions (I understand that it might not be desirable to start so many SSIS packages at once, but I€™d like to do it despite this).
Additional information:
The dtexec utility provides an error message where the package variables are shown and the fact that the package ran 0 seconds, but the €œMessage€? is empty (€œMessage: €œ).
Turning the logging on in all the packages does not provide an error message either, just a lot of run-time information.
The try-catch block around the process.start() script in the main package€™s script task also does not reveal any errors.
I€™ve increased the €œmax worker threads€? number for the cmdexec subsystem in the msdb.dbo.syssubsystems table to a safely high number and restarted the SQL Server, but this had no effect either.
The request:
Can anyone give ideas what could be the cause of the problem?
If you have any ideas about how to further debug the problem, they are also very welcome.
Thanks in advance!
Eero Ringmäe
Hi all,
I have a serious problem with my SSIS Package while executing using 32-bit DTExec and 64-bit DTExec.
Here are the details:
Environment:
Windows Server 2003 64-bit (Build 3790: Service Pack 2)
SSIS 32-bit & 64-bit installed
SQL Server 2005 (Microsoft SQL Server 2005 - 9.00.1399.06 (X64) - RTM)
SSIS Package details (compiled in 64 bit)
Script tasks only
Microsoft Visual Basic .NET (using TRY...CATCH block)
PreCompileScriptIntoBinaryCode = TRUE
Run64BitRunTime = TRUE
Execution
Batch file that uses DTExec to execute the Package.
SCENARIO
I am trying to exeucte the above SSIS package using both 32-bit and 64-bit DTExec to make it failure by providing invalid connection string. Here are the details,
Wrong connection String using 32-bit Execution
While establishing the connection the error message has been nicely captured in to my Exception block and writes into the log file.
Wrong connection String using 64-bit Execution
While establishing the connection the error has not been catpured anywhere (although I have TRY CATCH block) and it haults there itself with the message "Process is terminated due to StackOverflowException". Later I found that the error is due to the connection string along with the unhandled exception.
Please suggest any one of the following my findings, also if you have any other advice would be very much appreciated.
1. Shall I go ahead and fix the issue by handling those unhandled errors? (e.g Appdomain, application). I tried several but still not working using 64-bit DTExec.
2. Shall I go ahead and use 32-bit DTExec to execute the package? If so, is there any other major issue...like performance or anyother bug?
P.S: We cannot apply any service pack for SQL Server 2005 at the moment. Sorry abt it. If you have any specific hotfix for DTExec (without affecting SQL Server) then we can decide.
Sorry for the lengthy one and Thanks very much for you help in advance .
Thanks again!
Suresh
I would like to send back to MS-DOS (ERRORLEVEL) an error code 2 ( different from 0 and 1) via a scripting Task.
Our package are started with the DTEXEC Utility.
In general, how can i send back a flag saying "There were warnings" during the execution of a Package
I'm getting some errors when I run rs.exe from command line with regard to Parameters, and was hoping I might get some help here. I'm somewhat new to RS. I'm running SQL 2000 and RS 2000 on a Windows 2003 Server.
Here is my script:
***********************************************************
' File: RunReport.rss
Dim format as string = "Excel"
Dim fileName as String = "C:Export2.xls"
Dim reportPath as String = "/APSAgentCourseCompletionByUserGroup"
Public Sub Main()
' Prepare Render arguments
Dim historyID as string = Nothing
Dim deviceInfo as string = Nothing
Dim showHide as string = Nothing
Dim results() as Byte
Dim encoding as string
Dim mimeType as string = "ms-excel"
Dim warnings() AS Warning = Nothing
Dim reportHistoryParameters() As ParameterValue = Nothing
Dim streamIDs() as string = Nothing
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
' Report Parameters
Dim parameters(5) As ParameterValue
parameters(0) = New ParameterValue()
parameters(0).Name = "User Group"
parameters(0).Value = "66179312-f341-4df7-a855-79c5b8abaf9f"
parameters(1) = New ParameterValue()
parameters(1).Name = "Start Date"
parameters(1).Value = "12/22/2006"
parameters(2) = New ParameterValue()
parameters(2).Name = "End Date"
parameters(2).Value = "2/17/2007"
parameters(3) = New ParameterValue()
parameters(3).Name = "Course Name"
parameters(3).Value = "AA2B1AA0-E78A-4F84-834F-8EAAB75BEBD3"
parameters(4) = New ParameterValue()
parameters(4).Name = "Status To Include"
parameters(4).Value = "0"
results = rs.Render(reportPath, format, _
Nothing, Nothing, parameters, _
Nothing, Nothing, encoding, mimeType, _
reportHistoryParameters, warnings, streamIDs)
' Open a file stream and write out the report
Dim stream As FileStream = File.OpenWrite(fileName)
stream.Write(results, 0, results.Length)
stream.Close()
End Sub
'End of script
***********************************************************
As you can see, right now I've got all 5 report parameters hard-coded.
Here is the command line that I'm using as well as the error that I receive:
rs.exe -i c:RunReport.rss -s http://localhost/reportserver -t
Unhandled exception: The value of parameter 'Parameters' is not valid. Check the documentation for information about valid values.
Any insight that anyone can provide is greatly appreciated.
Thanks!
Ray
For a client i have built an application to give them the possibility to load packages for their data warehouse.
This application starts a database job in SQL Server, which in turn starts a dtsx package. This package loops over the contents of a table and starts the packages that are marked to be executed.
This all work well most of the time. Sometimes though, DTExec, the process running the packages, just stops running. There are no entries in the event viewer or anywhere else.
I run Windows Server 2003 with SQL Server 2005 SE SP1. The packages are run from the filesystem, not the database.
Has anyone encountered the same problem and know a solution? I can't find any info on the internet.
- Matthijs
I'm getting
will not acquire
a connection because the package OfflineMode property is TRUE. When the Offline
Mode is TRUE, connections cannot be acquired."
I'm running the 32bit DTEXEC on a 64bit machine since I'm using the Jet provider.
I see in the forum and other places that this error usually occurs when you try to run in 64bit.
I don't get this error when I've tried it, running the 64bit DTEXEC or when I run from BIDS on a 32bit machine.
Any help appreciated.
David
Hi all,
I m getting the following error while running the bcp utility.
Cannot insert null into column_name in table
something like this.
The value for that column is null in the input .csv file.
Instead of throwing error like this, i need those bad records should go in to the .BAD file and the remaining records should get uploaded into the database.
In my case the entire data upload is failing if any one bad record is there in the .csv file.
Can anybody help me. Its a bit urgent.
Thanks in advance,
Bharanidharan L
I am getting the following error when trying to run a deployment
utility. The server only has .net framework 2.0 and sql server 2005
(rtm) installed.
If it's any help, this server was recently upgraded from the june ctp to rtm.
This is a production server, so a solution involving as little disturbance to it's current state would be preferrable.
Thanks in advance for any suggestions.
-Jeremy
TITLE: Package Installation Wizard
------------------------------
Unexpected error occurred.
------------------------------
ADDITIONAL INFORMATION:
Retrieving the COM class factory for component with CLSID
{E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following
error: 80040154. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Retrieving the COM class factory for component with CLSID
{E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following
error: 80040154. (Microsoft.SqlServer.ManagedDTS)
------------------------------
BUTTONS:
OK
------------------------------
When i try to use the rsconfig utility to add the values to the
<UnattendedExecutionAccount>
<UserName></UserName>
<Password></Password>
<Domain></Domain>
</UnattendedExecutionAccount>
The WMI Provider returned an error: HRESULT=0x8004021D
We made SSIS package in dev environment in windows 2008R2 and SQL server 2012. Same packages were placed on SAN disks in cluster environment and are invoked with security contexxt of admin user and wih dtexec utility ( we call this using an sp). rarely but procedure completed i see the log text file by SSIS package and find the return code 5 means package is unable to load. i canst found what are the exact reasons for return code 5.
View 2 Replies View RelatedHi All,
In one of my SSIS package (which connect to DB2) i save the DB2 username and password in SSIS packge itself by using option "EncryptAllWithPassword".
When I try to run the packge using dtexecui.exe it works perfectly fine. It prompts me for package password and then run fine.
Now I am trying to run it using command line dtxece.exe and i get fooolwoing error. Please suggest and help!!!
DTExec.exe /FILE C:pkgDB2Load.dtsx /CONFIGFILE C:ConfigpkgConfigMaster.dtsConfig /Decrypt mypassword /CHECKPOINTING OFF /REPORTING EWCDI
Error Message:
----------------------
Description: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "IBM OLE DB Provider for DB2 Servers" Hresult: 0x80040E21 Description: " SQL30082N Attempt to establish connection fa
iled with security reason "17" ("UNSUPPORTED FUNCTION"). SQLSTATE=08001
"
Thanks
Sid
Hi,
when i deploy my package using the DTExecUI thru the Package Execution Utility.when we execute the package . we are getting the following error.
The Product Levelis insufficient for component "Flat File Source(1)"
the package design is
FlatFileSource ----> OlEDBDestination
what could be the solution for this?
Thanks
Jegan
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
Hi,
Please Help, I am very desparate for a solution to this one.
I have an error appearing
"Error 25115 Wrong Page (potential database corruption). Try Running the Repair Utility."
I have SQL Server Enterprise set up with Merge replication, it is being used to Sync with Windows Mobile Devices as the subscribers.
All the Windows Mobile subscribers have been synchronising fine up until recently, when 1 of the Subscribing Windows Mobile devices received this error.
The day after, another device Synchronised fine the first time (note that the Synchronisation was a long one and the SDF grew in size dramatically while the synchronisation occured, but the Sync worked fine and the SDF dropped back to its initial size) The 2nd sync 5 mins later failed however so this Mobile device has the same error also.
Any suggestions as to the below are much appreciated
a) Why this error occurs?
b)How do you resolve this error?
c)What is the Repair utility mentioned in the error, and is it of use to me?
Thanks in advance, I am very greatful for any advice.
Hi there.
I have a corrupt .sdf database sat on a SD Card but i am unable to find a way to repair it.
So far I have tried a few different methods, most of which just tell me what i already know i.e. "the database is corrupt and needs repairing!!"
I am unable to open the file in SSMS object browser (see above message) which means i cant run repair / shrink utilites.
I am also unable to add the database to a vs2005 project (again see above message) meaning again i can't run any repair utilities.
I have also tried using the compact / Repair utility in Query analyser 3.0 on my Windows Mobile 5.0 PDA but once again i am greeted with an "error reading file - Run the Repair Utility" Message.
Lastly i've tried using the SQLCEengine.repair method and, depending on whether i do it on the PDA or on a desktop pc it throws the exceptions "Error occurred reading database file - run the repair utility"(PDA) or "invalid database type" (PC)
Can anyone shed any light as to whether there is another (easier???) way of doing this or if i just have to face it that this file is lost?
Thanks
ps. the code i used for the .repair is as below:
Dim conn As SqlCeEngine
Dim strdb As String
strdb = "SD CardPathnameDatabase.sdf"
conn = New SqlCeEngine(String.Format("Data Source={0}", strdb))
If conn.Verify = False Then
conn.Repair(Nothing, RepairOption.RecoverCorruptedRows)
MsgBox("Successfully Repaired")
End If
Hello,
I have a command line as following, with DTEXEC to launch the execution of a package and to set a value (13335) of an user variable called CIB (string type):
dtexec /f c: empPackageInsert.dtsx
/set PackageDataFlowTask.Variables[Utilisateur::CIB].Properties[Value];13335
But I have got an error message saying that the object is not known in the package. My variable does exist in the variable window of the dataflow part.
Thank you for telling me what to set so that the variable can be set by the command line.
Regards,
Marie-Thérèse
i am using dtexec in command prompt
it always prompt the path is not valid and error is 0x80070057
below is what i input
dtexec /dts c:ssis******.dtsx
what's wrong? thanks
I understand to schedule an SSIS package to run, I need to use the dtexec utility. I want to schedule the job right within SQL. I walked through how to set up the job, but I really could not decipher the proper syntax to use as a Step.
I have the following:
dtexec /File "C:...file.dtsx"
Is the the proper way to schedule and execute an SSIS package or is there some other way I should be doing this. The pacakge will run unattended nightly. I am using SQL Server 2005.
Thanks for the information
Folks:
I have lots of Stored procedures in which we use 'dtsrun' to run DTS Packages. Now, after I upgrade the server to SQL 2005 will I have to change all the Stored procedure's to reflect 'dtexec' instead of 'dtsrun'?
Thanks !
Hi
I have a SSIS package which pulls files from a network share and loads data into SQLServer Database. When I execute the application using DTExecUI , It runs fine without any issues , but where as when I run it using the command line arguments, It seems to go in sleep mode and nothing happens. I need to kill the package from Task manager.
Following is the command I use to run my application
Dtexec /FILE "N:TempLoadFirewallData.dtsx" /CONFIGFILE "N:TempLoadFirewallData.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EWCDI /SET "Package.Variables[User::RunID]";41
Regards
Meghana
This was directly from BOL.
/Conf[igFile] filespec
(Optional). Specifies a configuration file to extract values from. Using this option, you can set a run-time configuration that differs from the configuration that was specified at design time for the package. You can store different configuration settings in an XML configuration file and then load the settings before package execution by using the /ConfigFile option.
Does this mean that I can specify which configuration file to use during runtime?
Or is just because I'm too desperate for that, I understood that way
Thanks
Hi,
The DTEXEC Utility has the capability of returning ReturnCodes which have specific meanings e.g.
ReturnCode=3 means: The package was canceled by the user.
Is it possible to set my own ReturnCode values?
For example, my Package contains a Script Task which contains code to search a folder for a file. If the file cannot be found then I make the Script Task fail and hence the Package fails. But, when the Package is invoked by the DTEXEC utility, then the ReturnCode is always set to 1. Is it posssible to set the ReturnCode from within the Package (in, say, a Script Task in the Event Handler) to a different value?
It is necessary to be able to set custom application-specific return codes because these return codes are passed to the Batch Scheduler which alerts Operations (Support) staff in the event of failure. Meaningful (custom) ReturnCodes expedite problem solving and are (usually) mandatory in large production environments.
If it is not possible to make a Package return my own returncodes via DTEXEC then can you suggest alternative solutions, please?
Thanks.
Hi!
When i excute in the sql server this works fine
xp_cmdshell 'dtexec /f "D:SSISProjectIntegration Services Project1ArchiveTicket.dtsx "'
but when i excute throught the C# code
jobCommand = new SqlCommand(@"xp_cmdshell 'dtexec /f "D:SSISProjectIntegration Services Project1ArchiveTicket.dtsx"'", cconn);
It shows up red lines near the " and ' qoutes. I know that quotation marks are wrong but don't know how to solve it.
some help please
Thanks
jas
Hi All,
I'm trying to execute DTExec from a workstation and I got some help from a different group without luck maybe someone here can help me.
This is what I try so far.
1. My package run in command line from my sql box using dtexec with
parameters.
2. Set the package with DontSaveSensitive and import into IS under MSDB with
the same option setup.
3. Set package role to public.
4. Share DTS folder with everyone permission just for testing.
5. Execute the package from a workstation using
//sqlServerbox/DTS/BINN/dtexec /dts "msdb/mypackage" /SER "MySQLServer" /set
package.variables[myvariable].Value;"myvalue1,myvalue2"
(myvariable is string and I can pass multiple values separate by commas)
6. Still getting error:
Error: 2007-02-09 10:31:34.31
Code: 0xC0010018
Source: Execute DTS 2000 Package Task
Description: Error loading a task. The contact information for the task
is "E
xecute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9;
? 2
004 Microsoft Corporation; All Rights
Reserved;http://www.microsoft.com/sql/supp
ort/default.asp;1". This happens when loading a task fails.
End Error
Anyone has any ideas?
Any help will be appreciate it. Tks in advance...
Rgds
Johnny
I can't crack this problem and my Google-Fu is failing me. I am using DTEXEC from a stored procedure to set a global variable in an SSIS package and execute the SSIS package, but I am getting an error. I will include the SQL code and the error that I am getting:
Code:
exec xp_cmdshell 'dtexec /SQL "Maintenance PlansSynchronizeWithProduction" /SERVER servernameinstance /USER user /PASSWORD password /SET Package.Variables[User:electMail].Properties[Value];1'
Error:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
NULL
Started: 3:17:02 PM
Warning: 2008-03-13 15:17:02.76
Code: 0x80012017
Source: ProductionToDevelopment
Description: The package path referenced an object that cannot be found: "Package.Variables[User:electMail].Properties[Value]". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
End Warning
DTExec: Could not set Package.Variables[User:electMail].Properties[Value] value to 1.
Started: 3:17:02 PM
Finished: 3:17:02 PM
Elapsed: 0.375 seconds
NULL
All the examples I find over DTEXEC seem to follow what I am doing in the code and making variables in an SSIS package isn't rocket science, so I don't understand where I am going wrong.
I have seen people suggest indirect configuration as a solution, but when I set it up (using the environmental variable TEMP from the dropdown) it doesn't seem to help anything. I have used the exact path from the configuration wizard, though, so I'm pretty sure I have the path right.
Can anybody spare a clue?
HI, with a dataflow that has delay validation property = true, DTExec will not try to validate it when I call it with /validate option. Is there a way to see if the dataflow validate even though the delay validation property is set to true?
Thanks,