DTExec Stops Running Without Error Message
Sep 10, 2007
For a client i have built an application to give them the possibility to load packages for their data warehouse.
This application starts a database job in SQL Server, which in turn starts a dtsx package. This package loops over the contents of a table and starts the packages that are marked to be executed.
This all work well most of the time. Sometimes though, DTExec, the process running the packages, just stops running. There are no entries in the event viewer or anywhere else.
I run Windows Server 2003 with SQL Server 2005 SE SP1. The packages are run from the filesystem, not the database.
Has anyone encountered the same problem and know a solution? I can't find any info on the internet.
- Matthijs
View 6 Replies
ADVERTISEMENT
Feb 21, 2008
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
View 4 Replies
View Related
Dec 1, 2006
Hello,
I have a DTS package that will run and execute with no problem when you start it. But when I schedule the dts package. The dynamic properties task fails with the following message.
Executed as user: CSEDBSTST001sqljobmgr. DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun OnStart: DTSStep_DTSDynamicPropertiesTask_1 DTSRun OnError: DTSStep_DTSDynamicPropertiesTask_1, Error = -2147220492 (800403F4) Error string: Could not open file for reading. Error source: Dynamic Properties Task Help file: Help context: 0 Error Detail Records: Error: 0 (0); Provider Error: 0 (0) Error string: Could not open file for reading. Error source: Dynamic Properties Task Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDynamicPropertiesTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
The task reads an .ini file to setup up many properties throughout the DTS package.
Does anyone have an idea about this?
Thanks
View 1 Replies
View Related
Sep 7, 2007
Hi
I am trying to import a excel file into a table but when i run it i am getting this error and i am not sure what this eror is
- Copying to [ICCStatements].[dbo].[Sheet1$] (Error)
Messages
Error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".(SQL Server Import and Export Wizard)
Error 0xc020901c: Data Flow Task: There was an error with input column "AdminShowInKit" (148) on input "Destination Input" (102). The column status returned was: "The value violated the integrity constraints for the column.".(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (102)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (102)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Sheet1$" (89) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.(SQL Server Import and Export Wizard)
Any help will be appreciated..
Regards
KAren
View 1 Replies
View Related
Jan 30, 2007
hi,
I'm working on "MERGE REPLICATION"...i followed the procedure same as the book
"SQL SERVER CE DATABASE DEVELOPMENT WITH the .NET COMPACT FRAMEWORK"Author Rob Tiffany, ch9,10
i got one error msg that..."a request to send data to the computer funning IIS failed,for more information seeHRESULT " ..When my program hits rep.Syncronize()...
here my codes
\\\\\\\\\\\
rep = New SqlCeReplication
rep.InternetUrl= "https://seawolf/fieldagentrda/sscesa20.dll"
rep.InternetLogin = "robtiffany"
rep.InternetPassword = "pinnacle"
rep.Publisher = "seawolf"
rep.PublisherDatabase = "IntelligenceData"
rep.PublisherLogin = "sa"
rep.PublisherLogin = "apress"
rep.Publication = "IntelligenceDataPublication"
rep.Subscriber = "subscriber"
rep.SubscriberConnectionString="Datasource=My Documents" & _"IntelligenceData.sdf;" & _ "SSCE:Database Password=apress"
If File.Exists("MyDocumentsIntelligenceData.sdf") Then
rep.Synchronize()
Else
MessageBox.Show("You must first create a database", "Error")
End If
\\\\\\\\\\\\\\\\\\\
can anyone help me ,how to solve this issue?
Thanks in advance
View 2 Replies
View Related
Jan 30, 2007
Hello,
I'm having problems when I try to run a package from a job in SQL Server Agent. I have the same package in a server and it works fine,but when I try to install it in a different server I keep getting this error:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 01:19:10 p.m.
Progress: 2007-01-30 13:19:10.40
Source: Delete scripts Execute Process Task
Operation Complete: 0% complete
End Progress
Error: 2007-01-30 13:19:10.57
Code: 0xC0029151
Source: Delete scripts Execute Process Task
Description: In Executing "C:Project_SSISDelete_Items.bat" "" at "", The process exit code was "1" while the expected was "0".
End Error
Progress: 2007-01-30 13:19:10.57
Source: Delete scripts Execute Process Task
Operation Complete: 100% complete
End Progress
Warning: 2007-01-30 13:19:10.57
Code: 0x80019002
Source: Upload data
Description: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 01:19:10 p.m.
Finished: 01:19:10 p.m.
Elapsed: 0.5 seconds
I can run it from Integration services Server, from BI, and I tried modifying the ProtectionLevel property to DontSaveSensitive and ServerStorage. I have other packages that run in jobs, and they work fine...but i don´t know what else to do....By the way, I'm using an administrator user to run the package.
Please help! =(
View 4 Replies
View Related
Apr 11, 2007
2:30:03 AM SQL Server Scheduled Job 'Our Job Name' (0x888B36086CCCC34FB353B408DEBE0432) - Status: Failed - Invoked on: 2007-04-11 02:30:00 - Message: The job failed. The Job was invoked by Schedule 30 (Our Job Name). The last step to run was step 1 (Our Job Name).
Where do you begin to discover the cause of the crash?
View 6 Replies
View Related
Jan 30, 2007
I have a test server running both 2000 and 2005 Reporting Services. Each day I have to restart the Report Server Windows service for the 2005 Report Server. This is the error I get when I try to access the Report Manager
The Report Server Windows service 'ReportServer$TSQL4' is not running. The service must be running to use Report Server. (rsReportServerServiceUnavailable) Get Online Help
After I start the Report Server Windows service using the Report Services Configuration tool I can access the 2005 Report Manager without errors. The windows service start up type is set to automatic.
I can not find why the 2005 version keeps going down.
View 1 Replies
View Related
Mar 27, 2007
Hi,
when I try to run my package with dtexec.exe, it starts fine but in the process it package calles another subpackage and at the time there is big delay before start processing the subpackage.
the subpackage has been setup so executionoutofprocess pramater has been set to true.
any idea what migth be the problem.
I have to metion even when I run this with in the visual studio still I have a big delay.
cheers
View 8 Replies
View Related
Oct 4, 2007
Hi everybody.
I'm trying to run a package, stored in MSDB, using dtexec utility from cmd.
I do this using "dtexec /sq Main_Package /ser local /user sa /Password Oracle"
But all I got is:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:14:15
Could not load package "Main_Package" because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
Source:
Started: 12:14:15
Finished: 12:14:34
Elapsed: 18.297 seconds
It runs perfectly from "Integration Services" directly(SQL Management Studio), but not from cmd.
I tried to run it withuot login and password, the same result
Any ideas?
Thanks.
View 5 Replies
View Related
Mar 3, 2008
Hello,
I'm having an odd issue trying to run an SSIS package on a 64 Bit SQL 2005 SP2 (build 3042) Windows 2003 SP2 64 bit AMD Cluster. I have to use the dtexec cmd line utility from SQL Server Agent because I need to connect to an Access database. When running the package from dtexec, it doesn't seem to be able to load the package, i keep getting this error:
Executed as user: USSI-CORPsql02admin. ...00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:56:00 PM Error: 2008-03-03 13:56:01.28 Code: 0xC0010018 Source: {DFBF51D9-DF81-41B9-9370-9DFC68E28FBA} Description: Error loading value "<DTSropertyExpression xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:Name="Subject">@[User::vString]</DTSropertyExpression>" from node "DTSropertyExpression". End Error Error: 2008-03-03 13:56:01.28 Code: 0xC0010018 Source: {DFBF51D9-DF81-41B9-9370-9DFC68E28FBA} Description: Error loading a task. The contact information for the task is "Send Mail Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2008-03-03 13:56:01.53 Code: 0xC001000E Source: TestMsgBox Description: The connection... Process Exit Code 1. The step failed.
The @[User::vString is a string variable in the package, and this particular package is actually just using the SendMail task without using an Access DB, as i'm trying to just get the dtexec utility to work. I believe i'm either doing something wrong or have found a bug, as i've used this in the past at another company without any issue.
Here's the cmd line that I'm using (I'm using the 32 bit version of dtexec):
E:Progra~1Micros~190DTSBinndtexec.exe /SQL "TestMsgBox" /SERVER D1PSQL02V /CHECKPOINTING OFF /REPORTING EW
The version of the dtexec file is: 2005.90.3042.0
Any help would be greatly appreciated.
Andy
View 14 Replies
View Related
Jun 22, 2007
I have a manager SSIS package that calls a generic loader SSIS package, via the 'Execute Process Task'. The manger package (amongst other things) creates a config file and and then executes DTExec passing the config specification in the Arguments property, i.e. '
'/FILE "D:AudiencePackagesUKDW_Core_Loader_Persist.dtsx" /CONFIGFILE "D:AudienceDataSCPmystery.dtsconfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF"
It works as expected, but, I always get the warning message 'File/Process "DTExec" is not in path.', I know that it is because the exe runs and loads the correct package which then performs the correct actions.
Have I dropped the ball here? I cannot see any reason for the warning as DelayValidation==True, I could set RequireFullFileName==True, but I do not know where SQL is installed on the various nodes.
Any input would be warmly received
Thanks
View 1 Replies
View Related
Apr 2, 2008
Hi,
I'm running several SSIS-packages in stored procedure using dtexec. Actually, there is a software that is running the procedure, but that's not important here.
The problem: if some of the packages failes, the whole procedure does not fail and I don't know if all the packages are successfully completed.
Here is a sample list of ssis-packages from procedure:
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataaaa.dtsx"'
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedatabb.dtsx" '
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataccc.dtsx"'
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataddd.dtsx"'
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataeee.dtsx"'
So, if eg bbb.dtsx would fail, is it possible to get the whole procedure failing?
View 5 Replies
View Related
Jan 11, 2008
Hi,
I have stumbled on a problem with running a large number of SSIS packages in parallel, using the €œdtexec€? command from inside an SQL Server job.
I€™ve described the environment, the goal and the problem below. Sorry if it€™s a bit too long, but I tried to be as clear as possible.
The environment:
Windows Server 2003 Enterprise x64 Edition, SQL Server 2005 32bit Enterprise Edition SP2.
The goal:
We have a large number of text files that we€™re loading into a staging area of a data warehouse (based on SQL Server 2k5, as said above).
We have one €œmain€? SSIS package that takes a list of files to load from an XML file, loops through that list and for each file in the list starts an SSIS package by using €œdtexec€? command. The command is started asynchronously by using system.diagnostics.process.start() method. This means that a large number of SSIS packages are started in parallel. These packages perform the actual loading (with BULK insert).
I have successfully run the loading process from the command prompt (using the dtexec command to start the main package) a number of times.
In order to move the loading to a production environment and schedule it, we have set up an SQL Server Agent job. We€™ve created a proxy user with the necessary rights (the same user that runs the job from command prompt), created an the SQL Agent job (there is one step of type €œcmdexec€? that runs the €œmain€? SSIS package with the €œdtexec€? command).
If the input XML file for the main package contains a small number of files (for example 10), the SQL Server Agent job works fine €“ the SSIS packages are started in parallel and they finish work successfully.
The problem:
When the number of the concurrently started SSIS packages gets too big, the packages start to fail. When a large number of SSIS package executions are already taking place, the new dtexec commands fail after 0 seconds of work with an empty error message.
Please bear in mind that the same loading still works perfectly from command prompt on the same server with the same user. It only fails when run from the SQL Agent Job.
I€™ve tried to understand the limit, when do the packages start to fail, and I believe that the threshold is 80 parallel executions (I understand that it might not be desirable to start so many SSIS packages at once, but I€™d like to do it despite this).
Additional information:
The dtexec utility provides an error message where the package variables are shown and the fact that the package ran 0 seconds, but the €œMessage€? is empty (€œMessage: €œ).
Turning the logging on in all the packages does not provide an error message either, just a lot of run-time information.
The try-catch block around the process.start() script in the main package€™s script task also does not reveal any errors.
I€™ve increased the €œmax worker threads€? number for the cmdexec subsystem in the msdb.dbo.syssubsystems table to a safely high number and restarted the SQL Server, but this had no effect either.
The request:
Can anyone give ideas what could be the cause of the problem?
If you have any ideas about how to further debug the problem, they are also very welcome.
Thanks in advance!
Eero Ringmäe
View 2 Replies
View Related
Apr 17, 2008
Hi all,
I have a serious problem with my SSIS Package while executing using 32-bit DTExec and 64-bit DTExec.
Here are the details:
Environment:
Windows Server 2003 64-bit (Build 3790: Service Pack 2)
SSIS 32-bit & 64-bit installed
SQL Server 2005 (Microsoft SQL Server 2005 - 9.00.1399.06 (X64) - RTM)
SSIS Package details (compiled in 64 bit)
Script tasks only
Microsoft Visual Basic .NET (using TRY...CATCH block)
PreCompileScriptIntoBinaryCode = TRUE
Run64BitRunTime = TRUE
Execution
Batch file that uses DTExec to execute the Package.
SCENARIO
I am trying to exeucte the above SSIS package using both 32-bit and 64-bit DTExec to make it failure by providing invalid connection string. Here are the details,
Wrong connection String using 32-bit Execution
While establishing the connection the error message has been nicely captured in to my Exception block and writes into the log file.
Wrong connection String using 64-bit Execution
While establishing the connection the error has not been catpured anywhere (although I have TRY CATCH block) and it haults there itself with the message "Process is terminated due to StackOverflowException". Later I found that the error is due to the connection string along with the unhandled exception.
Please suggest any one of the following my findings, also if you have any other advice would be very much appreciated.
1. Shall I go ahead and fix the issue by handling those unhandled errors? (e.g Appdomain, application). I tried several but still not working using 64-bit DTExec.
2. Shall I go ahead and use 32-bit DTExec to execute the package? If so, is there any other major issue...like performance or anyother bug?
P.S: We cannot apply any service pack for SQL Server 2005 at the moment. Sorry abt it. If you have any specific hotfix for DTExec (without affecting SQL Server) then we can decide.
Sorry for the lengthy one and Thanks very much for you help in advance .
Thanks again!
Suresh
View 13 Replies
View Related
Oct 3, 2014
I have a report that uses three tables from a database. As long as I only use two of the tables, it runs fine. I need the data from the third table for a line chart. So of course there is a great deal of data in the third table. I have a where clause for start date and end date. Is there a way I could only search the third table after I know what I need from it? Or
View 6 Replies
View Related
Jan 9, 2007
I would like to send back to MS-DOS (ERRORLEVEL) an error code 2 ( different from 0 and 1) via a scripting Task.
Our package are started with the DTEXEC Utility.
In general, how can i send back a flag saying "There were warnings" during the execution of a Package
View 1 Replies
View Related
May 8, 2008
I HAVE an SSIS Pkg that gets data from lotusnotes into SQLS ERVER 2005. This SSIS Pkg works just fine, when I run it from manually from Visual studio environment. However, when I run this as a dtsexec from command line it fails with the foll error" The product level is insufficient for component "DataReader Source(1). The dtexec command I use is :
dtexec /f "c:otesPack.dtsx"
View 3 Replies
View Related
Apr 25, 2008
Hi Guys,
I have already spent so many days in trying to find a solution to this problem but ..all in vain....
so please help me.
I have to send message to my running .Net [Asp.Net with C#] application from sql server. How can i do it?
We should not use notification services.
Please give me some examples / links.
Thanks in advance!
View 6 Replies
View Related
Apr 23, 2007
Hello:
I have a SSIS Project thats been running fine for months up until yesterday.
There's a master package that calls other packages, and when i run it now in Visual Studio, i get a Message Box after each of it's child packages run. The message states:
TITLE: Microsoft Visual Studio------------------------------The designer window cannot be closed while a package is running.Stop the debugger before attempting to close the window.------------------------------BUTTONS:OK------------------------------
This seems to be causing issues, because VS seems to hang on my machine at some point when running master packages, and i think it might due to a message box.
Anyone know how I can get rid of this?
View 2 Replies
View Related
Oct 13, 2015
I'm trying to put together an SSIS package that will look in one directory for 2 distinctly named .csv files. The files will then be loaded into 2 tables.Â
The first task I execute is a SQL Task that checks to see if the tables I'm loading the data into are empty. If the tables have data, the package stops executing. If they are empty, the package continues to execute.
What is the best way to send an email out from SSIS if the package stops on the first step?Â
View 10 Replies
View Related
Feb 7, 2007
I'm getting
will not acquire
a connection because the package OfflineMode property is TRUE. When the Offline
Mode is TRUE, connections cannot be acquired."
I'm running the 32bit DTEXEC on a 64bit machine since I'm using the Jet provider.
I see in the forum and other places that this error usually occurs when you try to run in 64bit.
I don't get this error when I've tried it, running the 64bit DTEXEC or when I run from BIDS on a 32bit machine.
Any help appreciated.
David
View 12 Replies
View Related
Feb 29, 2008
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
View 8 Replies
View Related
Apr 18, 2014
We made SSIS package in dev environment in windows 2008R2 and SQL server 2012. Same packages were placed on SAN disks in cluster environment and are invoked with security contexxt of admin user and wih dtexec utility ( we call this using an sp). rarely but procedure completed i see the log text file by SSIS package and find the return code 5 means package is unable to load. i canst found what are the exact reasons for return code 5.
View 2 Replies
View Related
Sep 13, 2007
Hi All,
In one of my SSIS package (which connect to DB2) i save the DB2 username and password in SSIS packge itself by using option "EncryptAllWithPassword".
When I try to run the packge using dtexecui.exe it works perfectly fine. It prompts me for package password and then run fine.
Now I am trying to run it using command line dtxece.exe and i get fooolwoing error. Please suggest and help!!!
DTExec.exe /FILE C:pkgDB2Load.dtsx /CONFIGFILE C:ConfigpkgConfigMaster.dtsConfig /Decrypt mypassword /CHECKPOINTING OFF /REPORTING EWCDI
Error Message:
----------------------
Description: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "IBM OLE DB Provider for DB2 Servers" Hresult: 0x80040E21 Description: " SQL30082N Attempt to establish connection fa
iled with security reason "17" ("UNSUPPORTED FUNCTION"). SQLSTATE=08001
"
Thanks
Sid
View 1 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Mar 16, 2006
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
View 6 Replies
View Related
Aug 18, 2006
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
View 5 Replies
View Related
Dec 27, 2007
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
View 13 Replies
View Related
May 22, 2007
I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies
View Related
Nov 20, 2006
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
View 5 Replies
View Related
Feb 5, 2006
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
Thanks for my help and suggestions...
Regards,
Gonzal
View 9 Replies
View Related
Oct 18, 2007
Trying to connect to remote server croaktoad.simpli.biz
I have SQL 2005 Developer on XP SP2 , I have disabled my windows firewall. I can ping to my server (croaktoad.simpli.biz) and i get no error message. My remote connection using both TCP/IP and named pipes are checkeed. My SQL Server Browser is running as well.
However when I try to connect using Managment Studio or running SQLCMD /Scroaktoad. simpli.biz /E I get the following error message
C:sqlcmd /Scroaktoad.simpli.biz /E
HResult 0x52E, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [1326].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired
So I've read all the forums for past 2 days and tried everything, nothing changed Any ideas?
View 4 Replies
View Related
