Hi,
when i deploy my package using the DTExecUI thru the Package Execution Utility.when we execute the package . we are getting the following error.
The Product Levelis insufficient for component "Flat File Source(1)"
the package design is
FlatFileSource ----> OlEDBDestination
what could be the solution for this?
Thanks
Jegan
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
I want to input a parameter to my package. I have a variable, and I tried changing its value from DTExecUI.
I did everything as mentioned in http://blogs.conchango.com/jamiethomson/archive/2007/03/13/SSIS_3A00_-Property-Paths-syntax.aspx but I still get an error -
Could not set "Package.Variables[User::var_input_step_Name].Properties[Value]" value to "RAW".
The variable was originally read from a XML config file. I stored the package to MSDB. I then ran dtexecui, selected my msdb package, and in Set Values, I entered property path and value. I also tried removing the "", and I even deleted the XML configuration. Still the same error.
What am I doing wrong? Any Package Settings to make?
TIA
Kar
Hello!
I'm trying to execute DTS package using dtsrun utility from MSDOS Prompt
and getting error message "Cannot Open user default database '<ID>'.Using master database instead".
here's the syntax
dtsrun -Stestserver -Utestuser -Ptestuser -Ncustomers
How can I resolve this?
Thank you
Lena
We have a package that loads the data from several excel files into database in a forloop.
Everything works files until the package hits the bad file.
My goal is to continue the loop to process the rest of the files by skipping the bad file and error. In each task OnError I am creating custom error message to send an error/ sucess summary email out at end of the process.
How can force the for loop to continue when there is an error?
Is there any way to reset the errors?
Thanks
R
While executing the SSIS package from visial studio it is running. If we execute from Integration services - - -> stored packages - - - -> msdb - - - -package name, the package gets executed.
But when scheduled through jobs it gives the following error in history
"Execution as user. <user name > The command line parameters are invalid. the step failed"
command line looks like this "
/DTS "MSDBMaintenance PlansPackage1-HYUNDAI" /SERVER tvmwindev02 /CONNECTION "10.10.1.52.upsframis";"Data Source=10.10.1.52;Initial Catalog=upsframis;Provider=SQLOLEDB.1;Integrated Security=SSPI;Auto Translate=False;" /CONNECTION DestinationConnectionOLEDB;"Data Source=mscoe.db.ustri.com;Initial Catalog=HISNA_POC;Provider=SQLOLEDB;Integrated Security=SSPI;Auto Translate=false;" /CONNECTION "sample.db2test";"Data Source=sample;User ID=db2test;Provider=IBMDADB2.1;Location=10.10.1.55;" /CONNECTION SourceConnectionOLEDB;"Data Source=SAMPLE;User ID=db2test;Provider=IBMDADB2.1;Persist Security Info=True;Location=10.10.1.55;Extended Properties="""";" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
"
What could be the reason ?
Deleep.P
Hello,
I have two packages which is having parent child relationship.
Package1 is calling Package2, Package2 will download the input files from remote server using COZYROC SFTP Task. then Package1 will execute.
It is working fine in BIDS and SQL Agent job in "DEV" Server. But it is not wroking when i deployed the packages and it's config files and then created a SQL Agent JOB to "QA" Server.
The Error is:
Description:
The connection type "SSH" specified for connection manager "LG-AUS" is not recognized as a valid connectionmanager type.
This error is returned when an attempt is made to create a connection manager for an unknown connect
ion type. Check the spelling in the connection type name.
End Error
Error: 2008-04-23 05:33:57.26
Code: 0xC0010018
Source:
Description:
Error loading value "<DTS:ConnectionManager xmlnsTS="www.micro
soft.com/SqlServer/Dts"><DTSroperty DTS:Name="DelayValidation">0</DTSroperty
><DTSroperty DTS:Name="ObjectName">SFTP-CMS</DTSroperty><DTSroperty DTS:Na
me="DTSID">{49D115FA-B208-4BFC-928D-7CC0964E743A}</DT" from node "DTS:Connection
Manager".
End Error
Error: 2008-04-23 05:33:57.29
Code: 0xC00220DE
Source: EPT Calling LG_Inbound
Description:
Error 0xC0010014 while loading package file "C:QATestLG-SFTPInbound.dtsx". One or more error
occurred. There should be more specific errors preceding this one that explains
the details of the errors. This message is used as a return value from functions
that encounter errors.
.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 5:33:55 AM
Finished: 5:33:57 AM
Elapsed: 1.359 seconds
Please give the solution ASAP.
Thanks
Thiru
I have a package that opens an XML file and stores the XML to a variable. Then the package executes a stored procedure passing the variable containing the XML data. This package had been working perfectly until I applied service pack 2 to SQL Server. Now when I execute the package I get an error when the stored procedure attempts to exeucte. The error is: "XML parsing: line 615, character 11, illegal xml character". The strange thing is that I can run profiler and copy out the command that is being executed and paste it into a query window and it exeuctes successfully in the query window. So does anyone know what changed with service pack two that is causing this problem and/or how to resolve it?
The position that the error message is referring to is the last character in the xml variable that the package is passing to the stored procedure. What I find strange is that it throws an error when called from the package but not when executed in the query window. Any help would be greatly appreciated. Below is a copy of the command from profiler that is throwing the error:
exec sp_executesql N'EXEC dbo.ABF_UpdateBillerList @P1, @P2',N'@P1 nvarchar(max),@P2 datetime',N'<billers>
<biller Key="8958">
<billerFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="26741">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="26742">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33073">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33074">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="218293">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
<mask Key="218888">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="13159">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13160">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13161">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="16948">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26740">
<contactFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="16411">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="16412">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="5136">
<billerFieldUpdates effDate="2007-06-07">
<acdind>C</acdind>
<billerNoteCurrent>State Farm Insurance is accepting payments electronically for auto, life, fire and health premium payments. Verify the premium account number matches one of the masks AND one of the addresses listed. Send all Paper Payments to: P. O. Box 588002, North Metro, GA 30029-8002, they may be addressed to State Farm Insurance or State Farm Insurance Support Center or Insurance Support Center</billerNoteCurrent>
<billerNotePrior>State Farm Insurance is accepting payments electronically for auto, life, fire and health premium payments. Verify the premium account number matches one of the masks AND one of the addresses listed. Send all Paper Payments to: P. O. Box 588002, North Metro, GA 30028-8002, they may be addressed to State Farm Insurance or State Farm Insurance Support Center or Insurance Support Center</billerNotePrior>
</billerFieldUpdates>
</biller>
<biller Key="8820">
<masks>
<mask Key="229786">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>560100##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229787">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>570105##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229788">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>570106##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229789">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>580100##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="9494">
<addresses>
<address Key="37164">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 1087</address1Current>
<cityCurrent>Norwich </cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>CT</stateCurrent>
<postalCodeCurrent>06360-1087</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="20439">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Norwich Dept of Public Utilities</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="7572">
<masks>
<mask Key="229757">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>5########</maskFormatCurrent>
<maskLengthCurrent>9</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="8844">
<addresses>
<address Key="26200">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>07101-0197</postalCodeCurrent>
<postalCodePrior>07101</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="26201">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>90030-0179</postalCodeCurrent>
<postalCodePrior>90030</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="37112">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 7835</address1Current>
<cityCurrent>Edison</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NJ</stateCurrent>
<postalCodeCurrent>08818-7835</postalCodeCurrent>
</addressFieldUpdates>
</address>
<address Key="37113">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 54228</address1Current>
<cityCurrent>Los Angeles</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>CA</stateCurrent>
<postalCodeCurrent>90054-0228</postalCodeCurrent>
</addressFieldUpdates>
</address>
<address Key="37114">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 11731</address1Current>
<cityCurrent>Newark</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NJ</stateCurrent>
<postalCodeCurrent>07101-4731</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="20435">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>First Investors - SMART</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20436">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>First Investors Federal - Smart</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26199">
<contactFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<stateCurrent />
<statePrior>NJ</statePrior>
<emailCurrent>billersupport@orcc.com</emailCurrent>
<emailPrior>billersupport@princetonecom.com</emailPrior>
<organizationCurrent>Online Resources</organizationCurrent>
<organizationPrior>Princeton eCom</organizationPrior>
</contactFieldUpdates>
<phones>
<phone Key="16180">
<phoneFieldUpdates effDate="2007-06-11">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="19346">
<phoneFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<phoneNumCurrent>609-606-3370</phoneNumCurrent>
<phoneTypeCurrent>Phone</phoneTypeCurrent>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="3956">
<masks>
<mask Key="123272">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601921##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="123912">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601918##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229658">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601916##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229659">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>603464##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="8215">
<addresses>
<address Key="20880">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>19355-1114</postalCodeCurrent>
<postalCodePrior>19355</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="20885">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>19493-0001</postalCodeCurrent>
<postalCodePrior>19493</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="19477">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Transamerica Life Insurance Company</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="19478">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>TLIC</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="7450">
<billerFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="31492">
<addressFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<contacts>
<contact Key="31491">
<contactFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="17309">
<phoneFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="8169">
<akas>
<aka Key="20419">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICO CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20420">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life Insurance Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20421">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLIC LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20422">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Long Term Care</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20423">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20424">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLAIC Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20425">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life and Annuity Insurance Company</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20426">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life and Annuity Insurance Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20427">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLAIC LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20428">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife, CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20429">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife Insurance Co of Connecticut</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20430">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>MIC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20431">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife Ins Co of CT</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20432">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICNY CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20433">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life Insurance Co of New York</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20434">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICNY LTC</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="9983">
<addresses>
<address Key="37075">
<addressFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<address1Current>PO Box 1335</address1Current>
<cityCurrent>Buffalo</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NY</stateCurrent>
<postalCodeCurrent>14240-1335</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="229671">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>##############</maskFormatCurrent>
<maskLengthCurrent>14</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229672">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>###############</maskFormatCurrent>
<maskLengthCurrent>15</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229673">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>##################</maskFormatCurrent>
<maskLengthCurrent>18</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229674">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>####-####</maskFormatCurrent>
<maskLengthCurrent>9</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229675">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>###-####</maskFormatCurrent>
<maskLengthCurrent>8</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="20380">
<akaFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<nameCurrent>Creditor Interchange</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20381">
<akaFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<nameCurrent>Creditors Exchange</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="1767">
<addresses>
<address Key="5189">
<addressFieldUpdates effDate="2007-06-06">
<acdind>C</acdind>
<postalCodeCurrent>50704-0780</postalCodeCurrent>
<postalCodePrior>50704-0788</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="1770">
<addresses>
<address Key="37073">
<addressFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<address1Current>1001 Fannin St. STE 4000</address1Current>
<cityCurrent>Houston</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>TX</stateCurrent>
<postalCodeCurrent>77002-6711</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="10101">
<addresses>
<address Key="36672">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>15250-7877</postalCodeCurrent>
<postalCodePrior>15250-0877</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="8957">
<billerFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="26738">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="26739">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33071">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33072">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="218292">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
<mask Key="218887">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="13157">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13158">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="16947">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26737">
<contactFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="16409">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="16410">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
</billers> ','2007-06-05 00:00:00:000'
Thanks!
gn
ETL Packages are getting failed sometimes(Package Execution Error). Eventhough executing ETL Package again from start, getting the same Error. But after Restarting Sql Service in BI Server, it is working fine. Whether it is the issue from Developer Code side or from server side.
View 7 Replies View RelatedReinstalling SQL Express did the trick
Thought this might help others..
My SSIS package carries out one data flow task after another e.g.
truncate tables
Copy table 1
cleanup tables
When using the execute package utility in SSMS to run the package , the data flow tasks are listed alphabetically, so it reads:
cleanup tables
Copy table 1
truncate tables
Can I change this so the data flow tasks are listed in the logical order I have specified them in the package as it makes it difficult to work out which step the package is at. And while I'm at it, it keeps telling me every separate task's elapsed time is zero when it's finished. It records the start and end time ok, but it can't seem to work out the elapsed time?!
Thanks
Hello Chaps,
I am using vb.net 2005 and SQL Server 2005.. I have deployed some of my packages on the server.. Now if i am trying execute packages with SSIS object model from any of developement PC they are executing perfectly. But as soon as i am trying to execute them from client pc - where no any component except (.netframwork) -- i am getting the follwoing error:
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}
Can any one help me out..? i have gone through some of the article stating that SQL client componet must be installed on the computer from where app runs...
Is there any other solution to use SSIS object model...
Let me know if any one you have...!
Thanks,
Tarang Pandya
I created a package within BIDS which tests successful. However when saved into MSDB and I execute the package, the package completes without any issues however doesn't work.
All the package is doing is a simple backup and copy operation but fails without any errors within the Execute Package Utility.
Has anyone seen this issue before?
In reference to the question raised in this thread
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1460591&SiteID=1
Since I'm not able to create a deployment utility, when a config file is shared among multiple packages and also I cannot get the permission from Sys Admins to use Env. Variables I'm struck.
Now I'm thinking of importing the package to Sql Server from the file system. Is there any caveats in this approach? especially regarding the config files?
[edit]
Also, do I need any special permissions to view the Integeration Services node in Management Studio? We are using Integerated Authentication, neither do I'm able to run sp_start_job sp in the msdb database.
[/edit]
Thanks
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
I'm a SQL Server 2000 user trying to get my head around v2005, in particular the changes from DTS to Integration Services.
I've build a few packages in BIDS and they work fine there, but saving them to either the file system or MSDB locations and running them in Management Studio results in:
Execute Package Utility has encountered a problem and needs to close. We are sorry for the inconvenience.
If I click on the debug button, I get this:
An unhandled exception ('System.IO.FileNotFoundException') occurred in DTExecUI.exe [404].
I've searched the Internet and found a few people who has also experienced this, but not received any answers.
Is there a kind guru out there with some idea of what is going on? Preferably something that doesn't involve re-installing, because the database has already been configured for our Blackberry users and I can't re-do it now.
Hi,
We are trying to create a deployment utility for a solution. The issue we are facing is, we are using a single package configuration file and when we try to build the solution to create the deployment utility, the build process fails saying that the package configuration file already exists. THe reason for this is while trying to build, the utility copies the configation fiel for the packages, it copies for one, but for the second onward, when it tries to copies, it fails saying the file already exists.
Any idea how to overcome this, or else any suggestions how to perform the similar steps to create a deployment utility for a solution in which the packages share a single package configuration file.
Any suggestion would be really appreciated.
Thanks in Advance,
Manish Singh
Hi:
After moving my deployment folder to the Target Server, I run the Installation Wizard. As I move next, I am missing the window which is supposed to allow me to set package config values as stated in MSDN:
"If the package includes configurations, you can edit updatable configurations by updating values in the Value list on the Configure Packages page."
Source: http://msdn2.microsoft.com/en-us/library/ms141802.aspx
Does anyone know why I am not seeing it? In my deployment bundle which I have moved over has currently 3 files:
1) SSIS Deployment Manifest
2) SSIS Package
3) SSIS Config File
Again, I double click on SSIS Deployment Manifest, and it starts fine. I go thru the steps for File System Deployment, and then it prompts for installation folder path. After that, it takes me directly to validation. Why is it not showing me the Configure Packages Page as described in the MSDN Documentation. Please advise. Thanks.
I have this problem executing an SSIS pkg using dtexec.
dtexec /f d:smappsssis_pkgsdts_SOAR.dtsx /REP E
Code Snippet
Started: 10:28:58 PMEnd Error
Error: 2008-03-03 22:28:59.00
Code: 0xC0202009
Source: dts_SOAR Connection manager "SourceConnectionExcel"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-03-03 22:28:59.00
Code: 0xC020801C
Source: Data Flow Task Source - CHANNEL_DATA [1]
Description: The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009.
Code Snippet
However, it runs fine when I double click the package and execute it using the Execute package utility. That really puzzles me.
The package transfers data from worksheets in excel to SQL Server 2005 DB.
Both source and destination are on the same system.
Please advise.
I'm getting some errors when I run rs.exe from command line with regard to Parameters, and was hoping I might get some help here. I'm somewhat new to RS. I'm running SQL 2000 and RS 2000 on a Windows 2003 Server.
Here is my script:
***********************************************************
' File: RunReport.rss
Dim format as string = "Excel"
Dim fileName as String = "C:Export2.xls"
Dim reportPath as String = "/APSAgentCourseCompletionByUserGroup"
Public Sub Main()
' Prepare Render arguments
Dim historyID as string = Nothing
Dim deviceInfo as string = Nothing
Dim showHide as string = Nothing
Dim results() as Byte
Dim encoding as string
Dim mimeType as string = "ms-excel"
Dim warnings() AS Warning = Nothing
Dim reportHistoryParameters() As ParameterValue = Nothing
Dim streamIDs() as string = Nothing
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
' Report Parameters
Dim parameters(5) As ParameterValue
parameters(0) = New ParameterValue()
parameters(0).Name = "User Group"
parameters(0).Value = "66179312-f341-4df7-a855-79c5b8abaf9f"
parameters(1) = New ParameterValue()
parameters(1).Name = "Start Date"
parameters(1).Value = "12/22/2006"
parameters(2) = New ParameterValue()
parameters(2).Name = "End Date"
parameters(2).Value = "2/17/2007"
parameters(3) = New ParameterValue()
parameters(3).Name = "Course Name"
parameters(3).Value = "AA2B1AA0-E78A-4F84-834F-8EAAB75BEBD3"
parameters(4) = New ParameterValue()
parameters(4).Name = "Status To Include"
parameters(4).Value = "0"
results = rs.Render(reportPath, format, _
Nothing, Nothing, parameters, _
Nothing, Nothing, encoding, mimeType, _
reportHistoryParameters, warnings, streamIDs)
' Open a file stream and write out the report
Dim stream As FileStream = File.OpenWrite(fileName)
stream.Write(results, 0, results.Length)
stream.Close()
End Sub
'End of script
***********************************************************
As you can see, right now I've got all 5 report parameters hard-coded.
Here is the command line that I'm using as well as the error that I receive:
rs.exe -i c:RunReport.rss -s http://localhost/reportserver -t
Unhandled exception: The value of parameter 'Parameters' is not valid. Check the documentation for information about valid values.
Any insight that anyone can provide is greatly appreciated.
Thanks!
Ray
Hi all,
I m getting the following error while running the bcp utility.
Cannot insert null into column_name in table
something like this.
The value for that column is null in the input .csv file.
Instead of throwing error like this, i need those bad records should go in to the .BAD file and the remaining records should get uploaded into the database.
In my case the entire data upload is failing if any one bad record is there in the .csv file.
Can anybody help me. Its a bit urgent.
Thanks in advance,
Bharanidharan L
I am getting the following error when trying to run a deployment
utility. The server only has .net framework 2.0 and sql server 2005
(rtm) installed.
If it's any help, this server was recently upgraded from the june ctp to rtm.
This is a production server, so a solution involving as little disturbance to it's current state would be preferrable.
Thanks in advance for any suggestions.
-Jeremy
TITLE: Package Installation Wizard
------------------------------
Unexpected error occurred.
------------------------------
ADDITIONAL INFORMATION:
Retrieving the COM class factory for component with CLSID
{E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following
error: 80040154. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Retrieving the COM class factory for component with CLSID
{E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following
error: 80040154. (Microsoft.SqlServer.ManagedDTS)
------------------------------
BUTTONS:
OK
------------------------------
When i try to use the rsconfig utility to add the values to the
<UnattendedExecutionAccount>
<UserName></UserName>
<Password></Password>
<Domain></Domain>
</UnattendedExecutionAccount>
The WMI Provider returned an error: HRESULT=0x8004021D
I HAVE an SSIS Pkg that gets data from lotusnotes into SQLS ERVER 2005. This SSIS Pkg works just fine, when I run it from manually from Visual studio environment. However, when I run this as a dtsexec from command line it fails with the foll error" The product level is insufficient for component "DataReader Source(1). The dtexec command I use is :
dtexec /f "c:otesPack.dtsx"
When I try to run a .dtsx file or even the Dtexecui.exe I get following error:System.IO.FileNotFoundException.
Thanks
Bill
I have already created package which loads a text file to database.I wanted to execute that package based on the availability of the file using Visual Basic,Perl or VBSCRIPT whichever is easier.Please advise.Thanks
View 4 Replies View RelatedI wrote a stored procedure that calls a DTS package that imports a file into a SQL Server table, then executes some commands on that table. How can I tell that the DTS package has completed, so that I can continue with the next command? Here is my code:
-- Run the DTS package
EXEC @Result = msdb..sp_start_job @job_name = 'MyJob'
WAITFOR DELAY '00:00:02'
-- Call the table that the package created
SELECT * FROM <imported_table> WHERE ...
I had to insert a WAITFOR statement to make this work. Any other suggestions as to how to know when to continue?
Thank you.
Is there a method to either:
A) Kick of a DTS package directly from a stored procedure without shelling out to the DTSRun facility.
B) Kick off a scheduled job containing a DTS task from a stored procedure?
What's the best method?
Hi Friends,
I need help from you.
I am working on SSIS packages for ETL purpose.
The version of SQL Server i am using is SQL Server 2005.
In Brief , the working of current ETL is as follows.
In ODS database i have 2 tables i.e Table_A & Table_B which gets loaded from another 2 staging tables A & B.
And using this 2 tables data will be loaded into a target table i.e Trg_A.
The ETL packages are executed by stored procedures by creating a job within the stored procedure.
The loading of the trg table is little tricky.
Before that loading of Table_A is implemented in a single SSIS package.
and loading of Table_B is been implemented in another SSIS package.
In the trg table there are two columns which will be getting updated as and when each table is loaded.
so for the first time if i run the package which is resposible for loading Table_A, it loads values into Table_A and once done it will updates (col1) in the target table.
Once after the complete of the execution of Package1.
Now i will kick off the second ssis package which loads the data into Table_B and updates the trg table's columns (col2).
Now the actual problem what i am facing is:
For loading Table_A and updating the col1 in Trg table i will be receving more than 5 excel file every month on weekly basis.
I cannot even gather all the files and run using a For-Loop counter.
So presently i am loading data excel file per week .
Similarly loading of table_B.
For a week if i am executing both the packages which loads the Table_A and updates the Trg(col1) and Table_B and updates Trg(col2), then i am getting a Deadlock Error and the entire ETL is getting messed up.
Now my requirement is , Eventhough the 2 packages are run in parallel , there could certain milli seconds time difference while start of the execution in Job Monitor.
I need to implement a Queing Mechanism which takes care of running the packages in a sequential manner rather than in parallel. i .e i need to ensure only one SSIS package is running in Job Monitor. Only after successful execution of either one the package, then only the second package should start its execution.
If we can implement such a queing mechanism , then my problem is solvedl.
I need some suggestions on this regard in implementing the Queing mechanism in a programatic approach using SQL Server Job Related MetaData Tables.
or else is there in server parameter or initialization parameters which can be set at Database level which suffice my requirement.
Any suggestions would be greatly appreciated.
Looking for sincere comments on this regards.
Thanks in advance.
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
Hi all,
I have a DTEXECUI.exe related question. This util is installed on our QA server, but not our dev-server. Is this optional during installation? I can't ask our admin, he's on vacation.
Maybe important to note, is that the QA-server runs on 64 bit, where as the other servers are only 32-bit..
Regards & Season greetings,
T.
Is there an option(s) that will allow me to reduce the amount of output to the Package Execution Progress window? My package has a number of steps, but trying to keep track of progress is difficult at best given the deluge of messages this window displays.
I would prefer output similar to the SQL Import/Export wizard, which shows executing tasks on a single line with a status and a link to any error messages off to the side. Is this available somehow, or do I have to build it myself?
Thanks, any help appreciated.
Hi
I have one problem in SSIS for passing Variable Values while executing Package. I'm giving in details as below:
I opened Microsoft SQL Server Management Studio
Made Connection to Integration Services
To Execute Package I Right Clicked and Click on Run Package
Then I Clicked on Execute and package was executed successfully.
Problem is that if I try to Set Values then Package through Error
DTExec: Could not set ProcessMode value to M.
Basically I could not understand in which format I should pass the Variables.
What I tried is listed below:
ProcessMode;M
Package.Variables[User:rocessMode].Value;M
Package.Variables[ProcessMode].Value;M
But every time I got errors.
And then I tried from Command Line
DTEXEC /DTS "MSDBLoad_Order" /SERVER SERVERNAME /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V /SET Package.Variables[ProcessMode].Value;M
First time Process run successfully. And it has changed the ProcessMode to M also. But after that it was also not changing the ProcessMode Value to M.
Please help in regarding. I tried a lot from Site examples also, but could not get proper solution.
Thanks in advance
Bhudev