Hi,
I am trying to transfer a table from DB2 to SQLServer 2000 through a DTS package. The DB2 table contains fields with default dates of "0001-01-01". The DTS package errors out whenever it reads this date as "invalid data value". In SQLServer 2000, the date fields are of type ShortDateTime. I have searched the Internet but did not find a workable solution. Please, can anyone help me find a solution?
Me, again.I have in drop down list values like: 0001, 0002, 0003,...When I insert them in database they are converted to 1, 2, 3,...What type of data should I use in ms sql 2000 for this not to happen?
View 2 Replies View Relatedhi friends...
good morning,
i want to get the integer 1 as 0001 in a table,
is there any keyword for this...
------------------
id | cname
------------------
0001 | king
0002 | hall
0003 | jack
. | .
. | .
. | .
1000 | don
Hi,
How to make (int) Identity auto increment field showed like
0001
0002
0003
0004
...
Hi
can somebody explain me how I can assign a NULL value to a datetime type field in the script transformation editor in a data flow task.
In the script hereunder, Row.Datum1_IsNull is true, but still Row.OutputDatum1 will be assigned a value '0001-01-01' which generates an error (not a valid datetime). All alternatives known to me (CDate("") or Convert.ToDateTime("") or Convert.ToDateTime(System.DBNull.Value)) were not successful.
Leaving out the ELSE clause generates following error: Error: Year, Month, and Day parameters describe an un-representable DateTime.
If Not Row.Datum1_IsNull Then
Row.OutputDatum1 = Row.Datum1
Else
Row.OutputDatum1 = CDate(System.Convert.DBNull)
End If
Any help welcome.
SQL 2005 Dev
How can I do this with Parameters? I can get a single parameter to filter for a single date (or even a combo list of the dates in DB). But I want my parameters to interact so that they specify a range. Is this possible?
Today I have got one scenario to calculate the (sum of days difference minus(-) the dates if the same date is appearing both in assgn_dtm and complet_dtm)/* Here goes the table schema and sample data */
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[temp_tbl]') AND type in (N'U'))
DROP TABLE [dbo].[temp_tbl]
GO
CREATE TABLE [dbo].[temp_tbl](
[tbl_id] [bigint] NULL,
[cs_id] [int] NOT NULL,
[USERID] [int] NOT NULL,
[code]....
I have a table that has hotel guests and their start stay date and end stay date, i would like to insert into a new table the original information + add all days in between.
CREATE TABLE hotel_guests
(
[guest_name] [varchar](25) NULL,
[start_date] [date] NULL,
[end_date] [date] NULL,
[comment] [varchar](255) NULL
[code]...
I want to know if there is a way to compare dates in the sql statement with dates that I input into a database and todays date. the datatype that I'm using is smalldatetime.The statement I used is:Select Date from Table where Date > 'Today.now'I get an errorCould this be done or is there another approach?
View 1 Replies View RelatedHi,
I have a table which records employees'time-off records. There are 6 columns in this TimeOff table. They are RequestID, EmpName, StartDate, EndDate, Type, NumofDays. I have another table which has all the dates from 01/01/1950 to 01/01/2056.
I am trying write a query which lists all the dates between the timeoff startdate and enddate, including the the start and end dates, but my query so far only lists the start and end date in a timeoff record:
SELECT D.[Date], Datename(dw,D.[Date]) AS Weekday
FROM Dates D LEFT JOIN TimeOff T ON D.[Date] = T.OffStartDate OR D.[Date] = T.OffEndDate
WHERE (OffType = 'Sick Day' AND EmpName = 'Cat White') AND (D.[Date] BETWEEN T.StartDate AND T.EndDate)
Any advice will be greatly appreciated!
Has anyone ever written a function to retrieve all individual dates between two given dates? Using DATEDIFF I can get the number of days between two dates. However I need to iterate through the days to identify weekend and holiday dates. Has anyone ever written a function to do this?
So, if select datediff(d,'07/01/2007','07/15/2007') as NumOfDays returns 14, I'd need to iterate through the 14 days and get the weekends and holidays. Would I have to use a cursor to iterate through the days?
I'm trying to generate this query, that displays Budget Current Year , Actual Current Year and Prior Year Revenue. When It comes to the Budget and Actual everything works fine, however when I try to add the query for the Prior Year I get an error, and I realized that the leap date is causing the error
Here is what I'm trying to generate
InnCodeID
Quarterly
Monthly
Days
Period
Year
BARmRev
AARmRev
PYRmRev
ADDIS
Q1
Jan
1
1
2008
NULL
NULL
ADDIS
Q1
Jan
1
1
2008
3462.14
5107.65
ADDIS
Q1
Jan
1
1
2008
NULL
NULL
ADDIS
Q1
Jan
1
1
2008
NULL
NULL
Here is the error that I'm getting:
Code Snippet
Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
(4834 row(s) affected)
Here is my Transact-SQL Syntax (summarized because I Couldn't post it):
SELECT
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01'
AND Year(dbo.Trans.TR_Date) = Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1'
THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
(SELECT Trans1.TR_Amount
FROM dbo.Trans Trans1
WHERE Trans1.TR_Dept = '10' AND TR_Main = '5120' AND TR_Sub = '01' AND trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date)
AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Year(dbo.CurrentDate.CurrDate) AS varchar(4))) AS datetime)
AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND trans1.datatype = dbo.Trans.DataType) ELSE NULL END) * - 1 AS BARmRev,
--AA Script Here AS AARmRev,
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01' AND Year(dbo.Trans.TR_Date)
= Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1' THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
(SELECT SUM(Trans1.TR_Amount)
FROM dbo.Trans Trans1
WHERE RIGHT(RTRIM(Trans1.TR_Dept), 2) = '10' AND Trans1.TR_Main = '5120' AND Trans1.TR_Sub NOT BETWEEN '04' AND '05' AND
trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2))
+ '/' + CAST(Year(dbo.CurrentDate.CurrDate)-1 AS varchar(4))) AS datetime) AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND
trans1.datatype = '0') ELSE NULL END) * - 1 AS PYRmRev
FROM dbo.EntityDef INNER JOIN
dbo.Trans ON dbo.EntityDef.ED_Property_ID = dbo.Trans.TR_Entity INNER JOIN
dbo.CurrentDate INNER JOIN
dbo.DimTime ON YEAR(dbo.DimTime.TimeDate) = YEAR(dbo.CurrentDate.CurrDate) ON dbo.Trans.TR_Date = dbo.DimTime.TimeDate
WHERE (dbo.EntityDef.ED_Property_ID = 'ADDIS')
ORDER BY dbo.EntityDef.ED_Property_ID, dbo.DimTime.TimeDate
I appreciate all your help
Thanks
Hello All,
I am trying to Add certain number of days to a particular date.
and my requirement is that it need to exclude all saturdays and sundays and then give me the resultant date in Sqlserver.
Please can anyone help me in achieving it.
thanks
Shiva Kumar
Hi can anyone help me , or am I on the wrong track.
Is there any easy way to create a stored procedure that inserts into a table the relevant months dates into a table based on the month and year as parameters.
I.e say the parameters passed are 01/2001 hence based on this all of the month of January 2001 dates are inserted into a table in this format : 'Jan 01 2001 12:00:00'
Thanks
OK, so I can return (& therefore use) the last day of last month using
select (GETDATE()- DATEPART ( dd , GETDATE()))
Which returns 31-03-2004 (dd-mm-yyyy)
Has anyone a good way of determining a way of deriving say a date such as 01-01-2004 (1st Jan)....
I'd like to get some data where my dmd.sdate falls always in the previous quarter.. but would like it to be not hard coded...
Currently I have
SELECT cust.no,
cust.surname,
dmd.csan,
dmd.sdate
FROM pdunity.dbo.cust cust,
pdunity.dbo.dmd dmd
WHERE cust.rowno = dmd.rowno_custdmd_cust
AND(dmd.sdate
BETWEEN '01/01/2004'
AND(GETDATE()- DATEPART ( dd , GETDATE())))
ORDER by dmd.sdate asc
Is there some form of function I can use to return 01/01/2004 automatically ?
Will
why does this sql return the dates in different formats? Is it a default setting on the server or do i just handle it on SQL?
use northwind
select top 20 orderdate from orders
select top 20 left(orderdate,10) from orders
thanks
fatherjack
We are deploying a system in the UK in SQL Server 6.5. They want the date to default to dd/mm/yy. Is there a way to set this on a permanent basis? Is there a way to set the server so any time a date is display, including getdate(), the result is dd/mm/yy?
View 2 Replies View RelatedHi All
I have a table which contains apart from other fields, 2 dates. i.e. startdate and enddate.
The startdate is always less than / equal to enddate.
I want to write a stored proc where I will give a date as a parameter and it should give me all the records there my date is between the startdate and the enddate.
Also I want to create a temp table in the procedure and the table gets populated with all the dates that comes between startdate and enddate, both dates inclusive.
I know this might be a tall order, but I am new to writing stored procedure, so I will be obliged if somebody can help me out
Yusuf
How would I pull just a list of dates for say the next year or two
View 1 Replies View RelatedI have an assignment using SQL this is the first time i have used it but i can understand the basics.
It is for an instrument service company and i need to find what instruments have not been serviced for a year.
i already know i have to:
SELECT instrument number, date of last service
FROM Instrument table
but after this i am unsure what code i can use in order to find all instruments that have not been servided in over 365 days what code can is best to use?
Hi friends,
I need to display the dates in between two dates without using tables. two dates are today date and 10th date from today date.
I have a columns with storeID's and dates i need to be able to find the difference of date for a certain store for its Min(Date) to the End of that Month
example
Date StoreID Difference of Date to end of the
Month
2008-01-02 00:00:00.000 163
2008-01-03 00:00:00.000 165
2008-01-01 00:00:00.000 167
2008-01-02 00:00:00.000 180
Hi,
I am trying to calculate our job value and product costs over a given time period. But if I run my query, the numbers just dont look right at all. Please can you have a look at this query and see if anything stands out?
-- FINISHED PRODUCTS PRODUCTION REPORTS DATA
-- gets current WIP Job information.
-- requires item details from this.
USE Staging
-- declare start and end variables
DECLARE @Start DATETIME
DECLARE @End DATETIME
SET DATEFORMAT DMY
SET @Start = '01/01/2008'
SET @End = '01/02/2008'
SELECT
SUM(jbs.Value) AS ProducionValue,
SUM(prd.Cost) AS Cost,
CONVERT(CHAR(10), @Start, 103) AS [From],
CONVERT(CHAR(10), @End, 103) AS [End]
FROM
(
SELECT
Job.[Job No],
Job.[Cust Name],
Job.[Req'd Date],
Job.ProdStartActual,
Job.Dept,
[Job].[Value],
Job.Loan
FROM
Job
WHERE
Job.[ProdStartActual] BETWEEN @start AND @End AND
Job.Cancel = 0 AND
Job.Sales = 1 AND
Job.Invoiced = 1 OR
Job.[ProdStartActual] BETWEEN @start AND @End AND
Job.Cancel = 0 AND
Job.Sales = 1 AND
Job.Invoiced = 2
) AS jbs INNER JOIN
(
SELECT
Item.[Job No],
Item.[Code]
FROM
Item
) AS itm ON jbs.[Job No] = itm.[Job No] INNER JOIN
(
SELECT
Product.[Product Code],
Product.[Cost]
FROM
Product
) AS prd ON itm.Code = prd.[Product Code]
"Impossible is Nothing"
If I give the from date and to date i should get all dates the between from and to.
eg:
from:'01-June-2008'
To:'03-june-2008'
Result:
Date
'01-June-2008'
'02-June-2008'
'03-June-2008'
Thanks in advance..,
cool...,
I've got a table (TYPE, DAYMTH) where it is a compound key and theDAYMTH is a datetime but all years are 1900 ONLY THE day and month aresignificant.What I want to do is for each type, find the next n dates - so forexample:TYPE DAYMTH1 1900-02-201 1900-05-051 1900-09-141 1900-11-112 1900-03-032 1900-07-07if I want to get the next 3 dates after 22 June 2005 it should give me:1 2005-09-141 2005-11-111 2006-02-202 2005-07-072 2006-03-032 2006-07-07so, anyone got any bright ideas?I've started down this route:create table #year (yr int)insert into #year values(2005)insert into #year values(2006)insert into #year values(2007)insert into #year values(2008)select *,convert(datetime,convert(varchar,yr) +substring(convert(varchar,daymth,20),5,20),20)from DAYMTHtable,#yearwhere convert(datetime,convert(varchar,yr) +substring(convert(varchar,daymth,20),5,20),20) > getdate()order by type,convert(datetime,convert(varchar,yr) +substring(convert(varchar,daymth,20),5,20),20)and although this seems to be a good start I wonder if there are bettersolutions. Also any quick ideas on how to finish if I decide to followmy existing thought process?thanksPhil
View 3 Replies View RelatedFor some reason guys my SQL string isn't working and I'm probably doingsomething stupid?SELECT *FROM sol_sessionSELECT *FROM SOL_SessionWHERE DateGiven '10/09/2006' AND <'13/09/2006'The 'DateGiven' field is a DateTime field, and I can't see quite whatswrong??I simply get a Syntax error!Cheers, Ash
View 15 Replies View RelatedTo support an application, I am integrating it with with Sqlserver2000. The task is simple: get the data at regular intervals, andwrite it into a table dedicated for that application. One of thefields I receive is a date, and it is formatted as an ISO date. Asample value looks like this: "2004-07-09-15.37.52.077258".SQLServer doesn't support this date format, though. The closest Ihave found is the style code "21" or "121" which accepts input as"yyyy-mm-dd hh:mi:ss.mmm". I have looked at using several replace()and convert() calls but no solution yet.Is there a way to transform the data to conform to this style acceptedby Sqlserver? I would like to do this in the INSERT statement itselfand not have to code application logic (i.e., user-defined function,etc.) for it.
View 2 Replies View RelatedHiI would like to create a SP where it will populate TableA based from TableB.TableB will be populated on a monthly basis using a DTS and within that Iwould like to run the SP to populate TableA.Can someone here please help me create the sql statements as a startingpoint.TIA!BobTableB (source)from_date to_date curr_code ex_rate1/1/2004 1/10/2004 CAD .750001/11/2004 1/16/2004 CAD .743211/17/2004 2/4/2004 CAD .722222/5/2004 2/20/2004 CAD .711112/21/2004 2/28/2004 CAD .778883/1/2004 3/3/2004 CAD .790023/4/2004 3/14/2004 CAD .768033/15/2004 3/23/2004 CAD .700223/24/2004 4/2/2004 CAD .73365etc...TableA (destination):date curr_code ex_rate1/2004 CAD 0.738477 calculation:(.75000+..74321+.72222) / 32/2004 CAD 0.737403(.72222+.71111+.77888) / 33/2004 CAD 0.74798(.79002+.76803+.70022+.73365) / 4etc..
View 3 Replies View RelatedHi. I hope this is the write place to post this, I hope it is.
basically, I want to be able to return me a query of giving me available dates in a table.
What I mean is that, if I have a table with fields including start date and end date, I want to return me the dates which are NOT listed/stored in the table.
kind of like a booking system, where you store the room reservation dates and obviously you don't want to double book that room, so I would like all the available dates to be returned back.
is this possible? how can I go about doing this?
Thanks!
Hello people! I have a question: I have a datetime field in my database. When I add a datetime variable (in 12.03.2008 format) to stored procedure (from C# code) that actually updates that field - everything ok. but when I am trying to update a datetime field with string 12.03.2008 (no matter nvarchar or datetime type) in T-SQL code - the date that i receive - 2008-12-03, it means that month and day are swapped! How can I fix it? Thanks.
View 5 Replies View RelatedHi,
I have date columns in my tables defined as smalldatetime. How do I perform a Select that will retrieve records with dates equal to the date selected in a calendar control as follows:
<asp:SqlDataSource ID="SqlDataSource3" runat="server" ConnectionString="<%$ ConnectionStrings:ReservationsConnectionString %>"
SelectCommand="SELECT [TIM_Time], [TIM_ID], [TIM_Valid_From] FROM [Times] WHERE ([TIM_Time] = @TIM_Time)">
<SelectParameters>
<asp:ControlParameter ControlID="Calendar1" Name="TIM_Time" PropertyName="SelectedDate"
Type="DateTime" />
</SelectParameters>
I get no records when I know they are there - do I have to put in additional checks to cater for the time component of the column?
Thanks in advance.
Hello,
I am trying to retrieve the data that are not more than 3 months. How do I do this? The closest thing that I can do is...
(dbo.CLASSIFIEDADS.PostDate > CONVERT(DATETIME, '2006-03-26 00:00:00', 102))
I want to be able to put 3 months in there somehow...
Thanks in Advance!
I have an application where there is a form to enter some data to the sql server 2005 database.
when the form is submitted, I also use Date.Now to insert the date the article was submitted. It enters fine. E.g. if I submitted it today, it would display 08/06/2006 (which is 06 August 2006). When getting the records, I use, "dd MMM yyyy" to format the date according to my culture. However, the result I get is 08 June 2006
What might be the problem. I hate working with dates with sql server