I have a largish DTS package built generically from VB. It uses a combination of DTSExecuteSQLTask and DTSDataPumpTask (using SQLstatements for the source). 18 tasks are failing (1 and 17 respectively by the above types).
When I try to execute the tasks individually I get messages like "Column name xxxx was not found". the column does exist in the table specified in the SQL statements and further the SQL statements execute ok using the Query Analyzer.
If I select Properties, Transformations for a task I get presented with the Verifying Transformations dialog (i.e. indicating there are errors). If I select the third option (Remove all transformations and redo audo-mapping) and save my changes the task then executes okay.
My client is using a sql server 7.0 to store realtime data like heat,temp,pressure etc inserted every second.He wants me to provide a solution to transfer the summarised data to oracle server on a regular basis..say once on every 5 min..
I have to value [CreateDate] in the data pump of my Flat File Source into my OLE DB Destination SQL Server Table. With a Variable within the SSIS Package or with a Derived Column task within the Data Flow between the Flat File Source and OLE DB Destination?
I did not see a forum for the SQL Server 2000 DTS.
I have a flat file feeding a table via a data pump. The table is only used by this process. It will run for about 30minutes and then fail. The message in the history does not give any detail on why it is failing. Below is the message I get and if I rerun the job it works fine. Anyone help me please.
Date 07/23/2007 6:00:02 AM Log Job History (Daily: Load EOL from MVS1 (First Run))
Step ID 1 Server PIT-CS-M608 Job Name Daily: Load EOL from MVS1 (First Run) Step Name Daily: Load tblCaseMasterSched Duration 00:28:05 Sql Severity 0 Sql Message ID 0 Operator Emailed Operator Net sent Operator Paged Retries Attempted 0
Message Executed as user: PIT-CS-M608SYSTEM. ...rt: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 1000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 1000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 2000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 2000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 3000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 3000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 4000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 4000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 5000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 5000 DTSRun OnProgress: DTSStep_DTSDataP... Process Exit Code 1. The step failed.
I have a vbscript to read all files from a directory and, if the fileis valid, I would like my DTS to process it. I tried using thevbscript as an ActiveX workflow script in the DTS, but it does notexecute the data pump until it has completed looping through all thefiles, so only the last file read is sucked into the database(utilizing a global variable as the filename). Is there a way toexecute the data pump task from within the activex script? I can'tseem to find any documentation about executing a DTS task.Basically, the workflow I want is:1)Read files from directory (the number and names may change eachtime). (done with vbs)2)For each file, send it through the transformation into the database.3)When the information is in the database, append a date to the fileand move it to the archive folder. (done with vbs)If I am going about this the wrong way and you see something that isnot obvious to me, please let me know.Thanks in advance!
I'm currently creating a SSIS package that takes data from 3 unique databases. A SQL DB, FoxPro DB, and an Oracle DB. The data is pulled, cleansed and put into a single SQL 2005 table. The data is then pulled from this table every 15 minutes, formated in a given specification and uploaded to an ftp site. This part is done. My question is this:
This package needs to run around the clock, non-stop. How can package be set up to do this? It needs to pull data from the 3 DBs and put it in the common table, wait 15 minutes and do it again. Wait 15 more mintues and do it again. And so forth. A problem I'm having is I don't see a way to set up a SSIS package so that it runs around the clock.
On same premise, I have another issue. When I try to take data from the common table and there is nothing there, it causes an error. Is there some way that you can run a test like
SELECT * FROM _table_ WHERE is_sent = 0
if results == 0 { wait 15 minutes and test again. } else if
{ write flat file, wait 15 minutes. }
This has to be done in the Control Flow scope, so I can't use a conditional split. This is a pretty big deal as this needs to run around the clock. Thank you in advance for your assistance.
I am having trouble understanding how the SSIS data pump determines when to decide "The final commit for the data insertion has started/ended". On some tasks the rows are inserted one at a time every few milliseconds (shown by a default getdate() in a datetime column). In others the final commit occurs as I would expect at the end of the data pump task.
There are times i want the data pump task to commit all records that are succesful, row by row and there are times I want an all or none situation. Can somebody explain why this behaviour occurs and how i can control which commit option I want the data pump tasks to use?
I've created a package that runs fine from BIDS when logged in with my domain account. I have created a SQL Agent Proxy on the server with that same account. In the Job Step on the server, I edit the connection strings so that username and password is there for both my source Access connection and the destination SQL Server. Here is the connection string I create for MS Access:
Code SnippetData Source=\10.210.226.202OTM Reports for SymmetricsCDRD001.MDB;User ID=admin;Password=;Provider=Microsoft.Jet.OLEDB.4.0;
Here is the error:
Code SnippetExecuted as user: DOMAINMRUSER. ethod call to the connection manager "MSAccessDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2008-01-30 09:49:19.66 Code: 0xC0047017 Source: Cost DTS.Pipeline Description: component "Cost" (1) failed validation and returned error code 0xC020801C. End Error Error: 2008-01-30 09:49:19.66 Code: 0xC004700C Source: Cost DTS.Pipeline
I have tried with various settings in the package for "ProtectionLevel" such as "DontSaveSensitive" and "EncryptSensitiveWithUserKey". I would think that using my account with the proxy the last option would work when running it on the server, since it is essentially the same user running the package, but I'm new to playing with the proxy.
I tried using package configurations but got an error there too, think it couldn't access the file, event though it was on an accessible share--accessible to my account.
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
$exception {"Arithmetic overflow error converting expression to data type smalldatetime. The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException} occurs here is my code protected void EmailSubmitBtn_Click(object sender, EventArgs e) { SqlDataSource NewsletterSqlDataSource = new SqlDataSource(); NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text; NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
Hi, all I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code. First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]"> </asp:SqlDataSource> And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany" DataTextField="DisplayName" DataValueField="PayrollCompanyID"> </asp:DropDownList> Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code: 1 Sub BindData() 2 3 Dim ds As New DataSet 4 Dim sda As SqlClient.SqlDataAdapter 5 Dim strSQL As String 6 Dim strCon As String 7 8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _ 9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _ 10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)" 11 12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD" 13 14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon) 15 16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString())) 17 18 sda.Fill(ds, "rsrc_Personnel") 19 20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel") 21 dgPersonnel.DataBind() 22 23 End Sub 24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well. What am I missing? Thanks for anyone's help! Cappela07
I am trying to create a page that adds users to a MS SQL database. In doing so, I have run into a couple errors that I can't seem to get past. I am hoping that I could get some assistance with them.
Error from SQL Debug: --- Server: Msg 295, Level 16, State 3, Procedure AdminAddUser, Line 65 [Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting character string to smalldatetime data type. ---
Error from page execution: --- Exception Details: System.Data.OleDb.OleDbException: Error converting data type varchar to numeric.
Source Error:
Line 77: cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip") Line 78: Line 79: cmd.ExecuteNonQuery() ---
Below is what I currently have for my stored procedure and the pertinent code from the page itself.
Hi. I am stuck with error: An error occurred while receiving data: '64(error not found)'. My Service Broker configuration: Server A initiator, Server B target. Server A sends message to Server B, Server B sends back reply. On this stage I receive problem. Server B message does not come to server A. It stays on sys.transmission_queue on server B. This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B. So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™. But, whenever I send messages after that, everything works fine.
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is: An error occurred while receiving data: '10054(error not found)'.
And on the other side its Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected. It seems that somehow the 3 columns are not read in from the source file? ans alslo fiscal year, fiscal week is not set up up properly in my data destination? anyone faced such errors before?
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing] GO /****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25 Arithmetic overflow error converting expression to data type int. The statement has been terminated. (1 row(s) affected)
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning. Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data. Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0. Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows. Task failed: Load XML Files Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted. Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "Package.dtsx" finished: Failure. The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
I am getting ErrorCode 8 while loading the data from stage to model. I have checked my error view it states that "Member Code is Inactive".
Initially I have loaded same set of data in Model from MDS Stage table but then deleted with ImportType = 5 which removed all the data from the MDM model.
Now i want to load it back but its giving the Error Code 8 .. Before loading the same data i have changed the stage table Importtype to 2 and Importstatusid to 0.
I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.
While executing the tasks, I got the error Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid. Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.
After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.
I hope someone has seen this one...I've got a very simple web method that returns a DataTable from my database. It worked fine until I changed this line of code:
string SqlString = @"SELECT Timestamp, Confession FROM Confessions WHERE ConfessionID = ? ORDER BY Timestamp desc";
To this line of code:
string SqlString = @"SELECT Timestamp, Confession FROM Confessions WHERE ConfessionID = ? AND CategoryID = ? ORDER BY Timestamp desc";
Here is the complete webmethod:
[WebMethod] public DataTable GetConfession (int ConfessionID, int CategoryID) {
DataTable dt = new DataTable(); dt.TableName = "XMLConfession";
string SqlString = @"SELECT Timestamp, Confession FROM Confessions WHERE ConfessionID = ? AND CategoryID = ? ORDER BY Timestamp desc";
using (OleDbConnection cn = new OleDbConnection (ConnectionString)) { using (OleDbCommand cmd = new OleDbCommand (SqlString, cn)) {
return dt; } To cause the error, all I did was add the AND statement into the query. Now I get this .NET error message every time I try to run this program:
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at System.Data.Common.UnsafeNativeMethods.ICommandWithParameters.SetParameterInfo(IntPtr cParams, IntPtr[] rgParamOrdinals, tagDBPARAMBINDINFO[] rgParamBindInfo) at System.Data.OleDb.OleDbCommand.ApplyParameterBindings(ICommandWithParameters commandWithParameters, tagDBPARAMBINDINFO[] bindInfo) at System.Data.OleDb.OleDbCommand.CreateAccessor() at System.Data.OleDb.OleDbCommand.InitializeCommand(CommandBehavior behavior, Boolean throwifnotsupported) at System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
I am using SQL Server Compact Edition 3.5 and C# .NET 2.0. It's worth noting that the web service does this outside of the program as well, so I don't think the problem is in the code that calls it. Also worth noting is that the query itself works fine when I substitute values in and run it in .NET Server Explorer.
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
I have one column in SQL Server 2005 of data type VARCHAR(4000).
I have imported sql Server 2005 database data into one mdb file.After importing a data into the mdb file, above column data type converted into the memo type in the Access database.
now when I am trying to import a data from this MS Access File(db1.mdb) into the another SQL Server 2005 database, got the error of Unicode Converting a memo data type conversion in Export/Import data wizard.
Could you please let me know what is the reason?
I know that memo data type does not supported into the SQl Server 2005.
I am with SQL Server 2005 Standard Edition with SP2.
Please help me to understans this issue correctly?
I am getting the following error running a data flow that splits the input data into multiple streams and writes the results of each stream to the same destination table:
"This operation conflicts with another pending operation on this transaction. The operation failed."
The flow starts with a single source table with one row per student and multiple scores for that student. It does a few lookups and then splits the stream (using Multicast) in several layers, ultimately generating 25 destinations (one for each score to be recorded), all going to the same table (like a fact table). This all is running under a transaction at the package level, which is distributed to a separate machine.
Apparently, I cannot have all of these streams inserting data into the same table at one time. I don't understand why not. In an OLTP system, many transactions are inserting records into the same table at once. Why can't I do that within the same transaction?
I suppose I can use a UnionAll to join them back together before writing to a single destination, but that seems like an unnecessary waste and clutters the flow. Can anyone offer a different solution or a reason why this fails in the first place?
i've created a package that will copy data from an oracle table to a sqlserv table (that table elemenst are identical), when i click on the connecting line between the two connections it executes without any errors, but nothing is copied, when i try to execute the package i'm getting an error... where can i go to find out what's causing the error. There is no error message or number returned from dts, all i get is a red 'x' . There are 1236 records that need to be inserted and when i get the red 'x' it tells me 1236 records have been processed. When i click on tranformations and select test, it works, but since it's a test nothing is actually copied. I've got other packages that i've created that do the same thing with other tables and they work. I tried just copying one record and that worked, so i assumed it must be data dependent, i've checked all the fields and made sure they weren't null, i've checked to make sure there aren't duplicate primary key records. Without knowing what the actual error is I'm stumped ???
I am trying to migrate our Portals database from SQL2000 to SQL2005, but I received "SQL Type Variant Data" error during the data migration with some database. Can anyone help me with this?
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1 Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode). Msg 7399, Level 16, State 1, Line 1 The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error. Msg 7330, Level 16, State 2, Line 1 Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK INSERTtbl_ASX_Data_temp FROM 'M:DataASXImportTest.txt' WITH (FORMATFILE='M:DataASXSQLFormatImport.Fmt')
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
