DTS Designer Error - Specified File Not Found

Apr 21, 2004

Hi there,

lately I had the following message on win2000 sp4 with sqlserver2000 sp3a: "DTS Designer Error - Specified file not found".
Then in the DTS editor the Task menu objects are missing and it is not possible to link a source and a target using Transform Data Task.

Before it used to work fine.

I have done the following:

- installing again last sp: same issue again
- reinstalling sqserver with a registry deep cleaning: same issue again
- started disabled windows services: same issue again

any idea?

Carsten

edit:
Could it be possible that a lately installed fix for Win2K interferes with DTS-Designer?

View 1 Replies


ADVERTISEMENT

Aggregation Designer: Very Few Aggregations Found

May 23, 2008

Hey,


I am trying to add aggregations to the partitions of my cube.

For that, I am using the Aggregation Designer, In which I choose MOLAP partitions with "Performance gain reaches 80%". Next I run the calculation. But the designer found only 78 aggregations and stop at 20% (496 Kb) !


My configuration is SSAS 2005 SP2, x64. Except this problem, everything is allright. Dimension attributes are all aggregatable.



Have you any idea of what can cause such a problem ?
Thanks in advance.

Alex

View 1 Replies View Related

File Not Found Error.

Nov 22, 2005

I downloaded and installed sql express yesterday.  After I rebooted I get a File not Found error.

View 1 Replies View Related

DB Design :: Rename Table Cannot Be Found In View Designer

Jul 8, 2015

I renamed a database table, and then try to create a view with that table. However, the renamed table does not appear in view designer. I have to close and re-open SQL Server Management studio 2014.

View 5 Replies View Related

DTSConfig File Not Found Error

May 8, 2008

I was requested to build and move and existing SSIS package from the developers local PC to the Dev server. Both are running SQL 2K5, I built the following command file so SQL Agent can run the import job.

REM *** Run for FileImport
set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig
"C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigFileImportFileImportLoadData.dtsx"

All files are in the proper place but when the jobs runs the following message shows up in the history;

Message
Executed as user: LIGHTHOUSE1SQLEXEC. ...system32>set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig C:WINDOWSsystem32>"C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigDEVFileImportLoadData.dtsx"Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:54:00 AM Warning: 2008-05-08 08:54:01.77 Code: 0x80012014 Source: FileImportLoadData Description: The configuration file "FileImportLoadData.dtsConfig" cannot be found. Check the directory and file name. End Warning Warning: 2008-05-08 08:54:01.77 Code: 0x80012059 Source: FileImportLoadData Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Progress: 2008-05-08 08:54:01.82 Source... Process Exit Code 0. The step succeeded.

My questions is how do I fix this and is this really and error?

Jay B.

View 2 Replies View Related

The Connection Is Not Found. This Error Is Thrown By Connections Collection When The Specific Connection Element Is Not Found

May 1, 2007

I've got a package which reads a text file into a table and updates another. I set up configurations so that I could import it into the SSIS store on both my dev and live servers. Now, I'm getting this error. I tried removing the configs and am still getting it.

I've been through each step and everything looks okay. Does anyone have any idea (a) what's wrong, (b) how to localise the error or (c) get any additional information? Or do I just have to recreate the package from scratch?



TITLE: Package Validation Error
------------------------------

Package Validation Error

------------------------------
ADDITIONAL INFORMATION:

Error at PartnerLinkFlatFileImporter: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found.

Error at PartnerLinkFlatFileImporter [Log provider "SSIS log provider for SQL Server"]: The connection manager "" is not found. A component failed to find the connection manager in the Connections collection.

(Microsoft.DataTransformationServices.VsIntegration)

------------------------------
BUTTONS:

OK
------------------------------

View 20 Replies View Related

EM DTS Designer ODBC Source As A File DSN Doesn't Work!

Jul 20, 2005

Hi All there!I am quite new in MS SQL administration so let me explain how it workon Your instances of SQL Servers.We have several DTS packages on our server, all of them managed onsome station which have seriously hardvare problem. So we wolud liketo catch two problems at one time and decided to develop systematicway of DTS manipulation.One of several aspects of this operation would be migration fromsystem ODBC data sources definitions into file ODBC sources ( .dsnfiles) in order to make them easier to manage ( backup for example,and even reusability on other workstations). All .dsn files should belocated on some network resource (\server\directory...) which wouldbe set as default ODBC directory in ODBC administrator on managementstation.When I begin to do so, then it apears that EM DTS Designer does notremember the path to the DSN files ( for example on design panel Ichose file dsn and by browse button point at the certain .dsn file,and then after DTS save the path disapears).Do You use this facility ( file .dsn) in DTS EM Designer, or maybe MShas it treated as usless, and nobody wants to use this?RegardsK

View 3 Replies View Related

Configuration File Locations - Likes To Say It Can't Load Them In Designer

Feb 28, 2006

I have a package and added a configuration file to it to hold settings such as connection strings etc.

When I open the package up in the designer and check where the configuration file is from, it likes to specify it with a full path like this:

\myserverprojectspackageslah.xml

Where blah.xml is the configuration file and the package file is in the same exact directory.

This creates an issue when I use build and then try to install the package on a server. When installing, the server tries to read the config from \myserverprojectspackageslah.xml which it can not.

Conversely I've tried editing the location in the designer changing it to just be "blah.xml". Then after using the build option I am able to install the package successfully on the server (it can not find the xml file).

However when I then load the package later in the designer to try to edit or chagne it, the designer complains that the "configuration file could not be loaded" and it can't find it even though it is in the same directory that the package definition file is in.

What's going on with this and how do i solve it?

View 1 Replies View Related

The Specified File Was Not Found

Jul 23, 2005

I have got an XP machine where I have installed a SQL Server for mytesting.I recently started working on a vb.net project requiring MSDE. Afterexecuting the Setup, made using Install Shield, including theinstallation of an instance of MSDE I can't start the Query Analyzer onmy "normal" SQL server or any instance, I am having a message saying"the specified file can not be found". I have to do a system restore torecover this functionality.Here is a pic http://www.corobori.com/sos/picSQLMSDE.jpgJean-Lucwww.corobori.com

View 4 Replies View Related

Text Qualifier In SSIS Designer For Flat File Source

May 19, 2008



Unlike SQL Server 2000 DTS, SSIS Flat File Connection Manager Editor does not provide available list of Text qualifier,

i tried

-- ""
-- double quote {"}
-- "
--{"}

but none of them worked....!
My file sample looks like this

"Col1","Col2"
"1234","3456"
"3456","1234"

what qualifier should I use then?

Many Thanks,

View 7 Replies View Related

DTS Designer Error

May 31, 2001

Hello everybody!
I've already posted this question before but this error never been resolved.
My DTS designer is totally screwed.
When trying to create new local package getting error message "Could not create Component Categories Manager".
I can't even use DTS to copy data in using DTS wizard.
Somebody recommended to reinstall SQL Server which I did but it didn't solve my problem.

Any other suggestions?

Thanks for your help

Lena

View 1 Replies View Related

DTS Designer Error

Dec 1, 2000

When using Enterprise Mgr on a workstation connected to a MSSQL Server, if I attempt to start a new DTS Package, I get the following msg:
Title: DTS Designer Error
Text : Could not create Component Categories Manager

I get the same msg when trying to edit an existing package. I tried to re-register Dtspkg.dll,Dtsui.dll, and dtsffile.dll. All were successful but Dtspkg.dll, which failed. Does anyone know what causes this, and what else I can try?

View 2 Replies View Related

DTS Designer Error

Mar 4, 2004

When I open my DTS package at my PC ( Client ) .There is an error message show like below .

DTR Designer Error.
There was a problem retriving the list of OLE DB providers.

No. Provider is selected .TO continue,you must select a valid provider.


Please help

View 7 Replies View Related

ADODB.Connection Error '800a0e7a' Provider Cannot Be Found. It May Not Be Properly Installed. Error

Feb 27, 2008

.im trying to run a script. and i get the errror at the topic. what can i do?

my pointed code is:





Code Snippet

Sur.open "PROVIDER=MICROSOFT.JET.OLEDB.4.0;DATA SOURCE=" & strMDBPath


im running on windows vista 64x bus.

View 1 Replies View Related

Event ID: 17053 - Operating System Error 112(error Not Found) Encountered

Jun 20, 2007

Hi there



I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.



I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.



It reads in the description



c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:

Operating system error 112(error not found) encountered.



Looking in the error log I see :



Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.

Error: 17053, Severity: 16, State: 1.

C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.

DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.



This is a new server with about 90% of disk space NTFS still available



Any idea's thanks.

View 5 Replies View Related

Excel File Not Found

Dec 14, 2007



Hi,

i am new to SSIS. I need to know can i make the excel source connection to redirect to a different excel file if the file i am looking is not available. i am using parameters to identify the excel files with the current date. if the file with that date is not found, i need to take excel file with the previous date to load the data.

Any one pl help me to do this successfully
Thanks

View 4 Replies View Related

SQL_2005_Express-Help File Not Found Err...?

Jan 6, 2007

Hei everybody,

Can someone explain why I get this err. msg. on SQL express? The installation went OK, no err, but when I press "Help" in SQL I get this message!



Thank you!



Stefan

View 2 Replies View Related

Test Connection Failed Because Of Error Initializing Provider. The HTTP Server Returned The Following Error : Not Found

May 26, 2008



Hi All,

I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.

Can you anyone please provide solution for this?

Thanks in advance,
Anand Rajagopal

View 1 Replies View Related

Backup Failed: Operating System Error 112(error Not Found).

Dec 28, 2005

Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?

View 2 Replies View Related

Mysterious An Error Occurred While Receiving Data: '64(error Not Found)'

Nov 20, 2007

Hi.
I am stuck with error: An error occurred while receiving data: '64(error not found)'.
My Service Broker configuration:
Server A initiator,
Server B target.
Server A sends message to Server B, Server B sends back reply.
On this stage I receive problem. Server B message does not come to server A.
It stays on sys.transmission_queue on server B.
This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B.
So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™.
But, whenever I send messages after that, everything works fine.

Any suggestions?

Please :-)

View 7 Replies View Related

An Error Occurred While Receiving Data: '10054(error Not Found)'.???

Oct 31, 2007



Hi,

I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is:
An error occurred while receiving data: '10054(error not found)'.

And on the other side its
Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.

The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.

I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.

Both machines are on the same domain, and I have also tried to grant rights to public to no avail.

Help!

TIA

Ian.

View 2 Replies View Related

DTS Designer Error-URGENT!

Jul 18, 2001

Hello!
Yesterday my DTS designer was fine and today suddenly when I open the package in designer there is nothing there.
I tried to create new package and it gave me an error when I was trying to save it "It is insufficient disk space to complete operation".

What does this mean?

Thanks

Lena

View 1 Replies View Related

DTS Designer Error In SQL 2000

Oct 19, 2001

I am testing SQL Server 2000 and after having installed it on a machine with SQL 7 already on it everything went OK.

However, if I try to create a DTS package (or open and existing one) on either of my SQL Server instances I get a "DTS Designer Error". After which, the DTS package window opens but I can't see any of the tasks in the tool bar. I can't select any tasks from the Task option in the menu bar either.

Has anyone experienced anything similar? Any suggestions would be appreciated.

Thanks.
Barb

View 2 Replies View Related

DTS Designer Error In SQL 2000

Oct 9, 2000

I am testing SQL Server 2000 and after having installed it on a machine with SQL 7 already on it everything went OK.

However, if I try to create a DTS package (or open and existing one) on either of my SQL Server instances I get a "DTS Designer Error". After which, the DTS package window opens but I can't see any of the tasks in the tool bar. I can't select any tasks from the Task option in the menu bar either.

Has anyone experienced anything similar? Any suggestions would be appreciated.

Regards,

Karl

View 1 Replies View Related

Query Designer Error?

Nov 24, 1999

Hello all

I've got SQL Server 7.0 SP1 installed (in a NT4 SP6 environment).

Recently, it came up with error whenever I try to open a table or a view (return all rows) inside the Enterprise Manager. The descriptive (NOT!) error message is like this:

"The query cannot be executed because some files are either missing or not registered", and on pressing "help",
the help files report
"Query Designer cannot locate your query files and cannot run your query"

I have tried re-booting the machine and upgrading mmc.exe to version 1.2 (from 1.1), but both in vain.

Can anyone shed some lights please?

Simon

View 2 Replies View Related

Query Designer Error

Feb 9, 2001

Checked out BOL on this issue, but not enough info received to troubleshoot. Hoping someone out there has some input.

This issue is only happening on the server side not the client. Also, it suddenly appeared on three different machines.

Query Designer:
"An unexpected error happened during this operation" [Query} - Query Designer encountered a Query error: Unspecified error.

The how: In a database, go to tables and select a table known to have data right click on mouse and select Open Table, return all rows. This is when the error appears.

BOL states the the file may be corrupt or from a non-supported version of SQL Server EM. Nothing was installed on these servers and we're still on SP2. This error just all of a sudden appeared and spread to 3 different machines...

Another issue is the Return to Top function is disabled. This function provides the maximum number of rows to fetch.

Any assistance would be appreciated! Thanks.

View 1 Replies View Related

Query Designer Error

Feb 26, 2001

When I try to Return All Records in a table, I receive the error "Query Designer encountered a query error: unspecified error." I can successfully view the design of the table just not the records themselves. This is happening in all of my tables in all dbases.

Thanks for any suggestions.

View 1 Replies View Related

DTS Designer Gives Error When It Starts

Jul 10, 2002

Thanks in advance for any help you may offer.

I have never seen this error before... When I click on DTS to either open an existing package or create a new one I get the following errors: Error in the DLL, DTS Design Error. When I try to create a new DTS it gives me the errors but still opens but I'm missing all of the connection objects except for MS data link and other connection. I had no problems designing and executing the packages from a development box. I'm not even refering to the typical scheduling problems that exist when SQL Agent is configured incorrectly!

View 2 Replies View Related

DTS Designer Lookups Error

Apr 16, 2008





Whenever we open a task and choose the lookups tab ellypsis button we get this error

Microsoft SQL Server Management Studio has encountered a problem and needs to close. We are sorry for the inconvenience.

If you were in the middle of something, the information you were working on might be lost.

Any idea what might be causing this? Am I missing something?

View 3 Replies View Related

Error When Opening Designer

Jan 13, 2006

When I try to open the designer (with exiting, e.g. tutorial or new project/package) I get the following error message:

Microsoft Visual Studio is unable to load this document:

Index (zero based) must be greater than or equal to zero and less than the size of the argument list.

After closing the project I have the following application event log error:

Faulting application devenv.exe, version 8.0.50727.42, stamp 4333e699, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x014fb87c.

 

 

View 3 Replies View Related

Email If File Not Found/exist

Jan 10, 2008

On Foreach File Enumerator, how can I send me email if no file found? Thanks.

View 2 Replies View Related

How Can I Solve This Error XML Parsing Error: No Element Found

Nov 13, 2007

 heres my code behind in UploadImage.aspx.vb _____________________________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationImports System.IOPartial Class UploadImage    Inherits System.Web.UI.Page    Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click        Dim conn As New SqlConnection        Dim comm As New SqlCommand        Dim connStr As String        connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString        conn = New SqlConnection(connStr)        comm = New SqlCommand("Insert into TImage (CategoryName,Picture,MimeType) VALUES (@name,@pic,@type)", conn)        'gi convert and image to byte array        Dim data(FileUpload1.PostedFile.ContentLength - 1) As Byte        FileUpload1.PostedFile.InputStream.Read(data, 0, FileUpload1.PostedFile.ContentLength)        comm.Parameters.Add("name", System.Data.SqlDbType.Text)        comm.Parameters("name").Value = System.IO.Path.GetFileName(FileUpload1.PostedFile.FileName).ToLower        comm.Parameters.Add("pic", System.Data.SqlDbType.Image)        comm.Parameters("pic").Value = data        comm.Parameters.Add("type", System.Data.SqlDbType.NChar)        comm.Parameters("type").Value = FileUpload1.PostedFile.ContentType        If FileUpload1.HasFile = True Then            Try                conn.Open()                comm.ExecuteScalar()                Label1.Text = "Successfully uploaded"                conn.Close()            Finally            End Try        End If    End Sub    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load            End Sub    Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button2.Click        Server.Transfer("image.aspx")    End SubEnd Class______________________________________________________________________________________________________________________________then here my code behind in Image.aspx.vb________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationPartial Class image    Inherits System.Web.UI.Page    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load        Dim conn As New SqlConnection        Dim comm As New SqlCommand        Dim connStr As String        Dim reader As SqlDataReader        Dim dataBuffer() As Byte        connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString        conn = New SqlConnection(connStr)        comm = New SqlCommand("Select * from  TImage where no = @no", conn)        comm.Parameters.Add("no", System.Data.SqlDbType.Int)        comm.Parameters("no").Value = 5        conn.Open()        reader = comm.ExecuteReader        reader.Read()        Response.Clear()        Response.AddHeader("Content-type", reader("CategoryName"))        Response.AddHeader("Content-type", reader("MimeType"))        Dim blen As Integer = CType(reader("picture"), Byte()).Length        dataBuffer = reader("Picture")        Response.OutputStream.Write(dataBuffer, 0, blen)        Response.Close()        conn.Close()    End SubEnd Class_____________________________________________________________________________________________________________________ When I am going to call the Image.aspx it always prompt this error:XML Parsing Error: no element foundLocation: http://localhost:4730/tesdaweb/UploadImage.aspxLine Number 1, Column 1:Is there something wrong in my codes... Please helpthanks... 

View 1 Replies View Related

An Error Occurred While Receiving Data: '64(error Not Found)'

Aug 23, 2007

We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).

We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:

An error occurred while receiving data: '64(error not found)'

Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved