DTS Error Files
Aug 26, 1999I have a data driven query that when I preview the data works fine. When I try to run the DTS
I get a failed message. Is there an error log for DTS, and if so where is it stored?
ADVERTISEMENT
Sql Server 2005 Dev Edition Error - Unexpected Error While Updating Installed Files
Feb 14, 2007I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:
Product : Microsoft SQL Server 2005
Product Version: 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Updating Installed Files.
The error is : Fatal error during installation.
Error Number : 29528
There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can€™t tell if the issue is specific to registry settings, security, file types, etc€¦ The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?
Thanks, Jennifer
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetTargetFolder(Folder=C:WINNTsystem32)
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetSourceFolder(Folder=1System)
MSI (s) (6C:94) [16:02:23:713]: Executing op: FileCopy(SourceName=sqlctr90.dll,SourceCabKey=sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A,DestName=sqlctr90.dll,Attributes=16384,FileSize=66264,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=2005.90.1399.0,Language=1033,InstallMode=58982400,,,,,,,)
MSI (s) (6C:94) [16:02:23:713]: File: C:WINNTsystem32sqlctr90.dll; To be installed; Won't patch; No existing file
MSI (s) (6C:94) [16:02:23:713]: Source for file 'sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A' is compressed
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2318 2: C:WINNTsystem32sqlctr90.dll
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:723]: Executing op: CacheSizeFlush(,)
MSI (s) (6C:94) [16:02:23:723]: Executing op: InstallProtectedFiles(AllowUI=0)
MSI (s) (6C:94) [16:02:23:723]: Executing op: ActionStart(Name=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,,)
MSI (s) (6C:94) [16:02:23:733]: Executing op: CustomActionSchedule(Action=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,ActionType=1025,Source=BinaryData,Target=InstallFTERef,CustomActionData=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData)
MSI (s) (6C:2C) [16:02:23:743]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64E.tmp, Entrypoint: InstallFTERef
FTECa.DLL: INFO: FTE: InstallFTERef(), Entering...
FTECa.DLL: INFO: FTE: GetFTERefInstallParams: FTERef : C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseCHS.txt Size=1000 IDR=1696
.
.
.
.
.
.
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sSVE.xml Size=1035 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTHA.txt Size=1036 IDR=697
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTHA.xml Size=1037 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTRK.txt Size=1038 IDR=2224
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing registry updates,)
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTRK.xml Size=1039 IDR=1142
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1345,Source=BinaryData,Target=Rollback_UpdateETWMOFWithGUID,CustomActionData=100Removing registry updates100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Updating Installed Files,)
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_UpdateETWMOFWithGUID,CustomActionData=010Updating Installed Files100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:10) [16:02:24:464]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64F.tmp, Entrypoint: Do_UpdateETWMOFWithGUID
<Func Name='LaunchFunction'>
Function=Do_UpdateETWMOFWithGUID
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_UpdateETWMOFWithGUID
PerfTime Start: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
<Func Name='Do_UpdateETWMOFWithGUID'>
Calling installSqlEvent Trance
The arguments that are passed to InstallSqlEventTrace are InstanceName: MSSQLSERVER , ProductCodeL: {2373A92B-1C1C-4E71-B494-5CA97F96AA19} , BinPath: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
INFO: Checking installed version
INFO: Writing MOF file
ERROR: Unable to open registry key: HRESULT = 0x80070005, Key = SYSTEMCurrentControlSetControlWMISecurity
The value returned is -2147024891
<EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'>
PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
Gathering darwin properties for failure handling.
Error Code: 1603
MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'>
MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0
MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0
Action ended 16:02:37: InstallFinalize. Return value 3.
Flat File Source Error Output Conversion Error With UNICODE Files
May 14, 2008i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
i hope you can help me with issue.
Thanks in advance.
Error 945: Inaccessible Files
Jun 17, 2008Msg 945, Level 14, State 2, Line 1
Database 'Northwind' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
I keep getting that error for just trying to USE Northwind. I don't understand why this problem is occurring. It was working fine for the past few weeks. Yesterday something happened to the DB and it said something about recovery to which I accidentally clicked cancel. From then on I can't access some of the DB that I have on my computer.
I'm fairly new to the SQL Server Environment so I would appreciate any and all help that can be provided. I've google searched the details but I can't seem to get any of those to work. Thanks in advance for your reply.
Dts To Import Csv Files Error
Jan 31, 2008I'd like to set up a dts package to import .csv files and on testing one .csv with only one row I am getting this error:
Error Source: Microsoft Data Transformation Services Flat File Rowset Provider
Error Description: Too many columns found in the current row; non-whitespace characters were found after the last defined column's data.
data set from .csv:
-31,0,"CENTER","","","64 ROCK DR. #4100","BETH","MD.","20417","0470-5",30109,10598,"52492000 083","1018","406800","6896CE","7007","G00887",1,13983.24,2139.66,42741.9,150101.36,830317.41,1562843.99,30128.45,2,506,0,0,0,0,0,0,37.87,1,0,0,476.39,472.15,0,1191.12,0,90073.46,43038.97,0,309926.59,-14880.49,20060102,20090101,"A","","",""," ","C62454",0,0,0,0,0,0,0,0,8.39,0,0,0,0,"",0,"00000000",""
Error Using Configurations Files
Jun 4, 2007I wanted to add all my configurations/vairbles in a config file, so I€™d tried to use the Package Configuration Organizer, to create and enable package configurations€¦
If I want the config to contain information regarding on of my connection manageres, the package fails during test, with the following msg:
Information: 0x40016041 at OrcaleToSQLServer: The package is attempting to configure from the XML file "BDK_LABasedataDTS_config.dtsConfig".
SSIS package "OrcaleToSQLServer.dtsx" starting.
Information: 0x4004300A at Transfer data from Oracle To SQL server, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at OrcaleToSQLServer, Connection manager "XXXXX.xxxx": An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Der opstod en eller flere fejl ved en OLE DB-handling på flere trin. Kontroller alle OLE DB-statusværdier. Handlingen blev ikke udført.".
Error: 0xC020801C at Transfer data from Oracle To SQL server, OLE DB Source to Orcale [1]: The AcquireConnection method call to the connection manager "LASYS.lakig" failed with error code 0xC0202009.
Error: 0xC0047017 at Transfer data from Oracle To SQL server, DTS.Pipeline: component "OLE DB Source to Orcale" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Transfer data from Oracle To SQL server, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Transfer data from Oracle To SQL server: There were errors during task validation.
SSIS package "OrcaleToSQLServer.dtsx" finished: Failure.
Translation Danish line:
Der opstod en eller flere fejl ved en OLE DB-handling pÃ¥ flere trin. Kontroller alle OLE DB-statusværdier. Handlingen blev ikke udført -> One or more errors regarding a OLE DB-action on serveral steps. Check all OLE DB-statevalues€¦ the action was not carried out..
Move Bad Files To Error
Oct 1, 2007Hi,
I am looping a set of .txt files in a folder using foreach.
Inside foreach, I have a Dataflow task that does the transformation. After that i have added a File System that moves file to archive.
However, If the user puts any other file instead of a .txt file, i want to move the file to Error folder and this should be before the DataFlow starts within foreach.
How can i do this? I want to use script to read the file extension and then move it to the error.
Lalit.
Do We Control Over Sql Server Error Log Files ?
May 9, 2001Hi, everybody
I am trying to run job that will
look for errors in error log files and save it to text file
In order to get up to last minute infromation I am using errorlog
1. at what point errorlog ranamed to errorlog1?
2. Can configurate size of errorlog file ?
3. Can I configurate time when errorlog ranamed to errorlog1
when i run in Sql Query analyser
print '------------ level 16 from last Sql errorlog file ----------------'
print 'These messages indicate errors that can be corrected by the user '
USE master
EXEC xp_cmdshell 'findstr /i /n /c:"level 16" InnvisionGMSSQL7LOGerrorlog.*'
go
I getting output
------------ level 16 from last Sql errorlog file ----------------
These messages indicate errors that can be corrected by the user
(0 row(s) affected)
when my job saves this command to file
I getting output
------------ level 16 from last Sql errorlog file ---------------- [SQLSTATE 01000]
These messages indicate errors that can be corrected by the user [SQLSTATE 01000]
How replace [SQLSTATE 01000] on user friendly message
Thanks
How To Read Server Error Log Files From Another M/c??
Mar 28, 2000I have a few servers registered in my Enterprise Manager which I am managing. Can I see the server error log files for these servers?
Any help is greatly appreciated.
Error In Attaching .mdf Files.. How Can This Be Solved?
May 11, 2006We've tried attaching the mdf files given to us by some customers using the script they've provided, too.
I created the database with the corresponding names, and tried to run their script. However, I get the message "The media family on device 'D:DatabaseDVVAD01.mdf' is incorrectly formed. SQL Server cannot process this media family."
What could possibly have gone wrong? Is it also possible that the file was not properly detached, or what?
SQL 2012 :: BCP Extract Files Error
Feb 24, 2015I run this code on several environments successfully but when on run it on a different environment it fails.
Its very strange as the user has database SA and OS administrator permissions.
Code...
declare @Command varchar (250)
set @Command = 'bcp "SELECT * FROM QAProcess.dbo.ReadMe_Table" queryout "THOMSONS-SQL01TempReadMe.txt" -c -T'
EXEC master..xp_cmdshell @Command
Error....
SQLState = 28000, NativeError = 18456
Error = [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'T-BXSQLServerAccount'.
NULL
Out Of Memory Error Inserting Files
Oct 4, 2007Hello.
I'm working with SQL Server 2005 Standard edition.
I have a Java program that loads PDF files into the database. I have a table called T08_entity which, among others, has two IMAGE columns. The first Image column is for the original PDF file. The second one is for the PDF file with modified permissions (printing, saving, etc). This is made using the i-text library.
The programs looks for the content of a disk folder, reads the contents of the folder, and inserts, one by one, the pdf files (besides other fields, like the name of the file, and ID, etc... but these are varchar or int fields. No problem with these.
When the folder has only small files (smaller that 7-8 mb), it loads them without any problem into the database. But when the folder has bigger files (>10mb, more or less...) I get an OUT OF MEMORY error.
I'm using the latest sqljdbc.jar driver (v1.2.2727). My server computer has only 1GB of RAM... but I've read that this latest driver can load big amounts of binary data using the connection property "responseBuffering=adaptive".
Here is a sample of my code (at least the most relevant lines):
This is my connection code:
public String getConnectionUrl(){
return "jdbc:sqlserver://"+serverName+":"+portNumber+";databaseName="
+databaseName+";responseBuffering=adaptive;selectMethod=cursor";
}
public java.sql.Connection getConnection(){
try{
...
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
con = java.sql.DriverManager.getConnection(getConnectionUrl(),userName,password); if (con.getAutoCommit())
{
con.setAutoCommit(false);
}
...
}
catch(Exception e){
System.out.println("etc, etc...");
}
return con;
}
The following is a loop where each loop represents a file in the folder:
File[] contenido = archivo.listFiles();
for(int i=0;i<contenido.length;i++)
{
if (contenido[i].isDirectory())
{
procesarDirectory(contenido[i]);
}else
{
insertDirectory(contenido[i]);
}
}
...And this is the insertDirectory procedure which inserts every file: the pdffile and pdffilenoperm are the IMAGE columns. The rest are varchar or int columns:
public void insertDirectorio(File archivo) {...if (archivo.isFile()){ pstmt =con.prepareStatement("INSERT INTO temp_carga "+ "(directory, name, dir_sup, filetype, pfilesize,pdffile,pdffilenoperm)"+ " values (?,?,?,?,?,?,?)"); }...
long tamano = archivo.length();
pstmt.setString(1,pdffile.getPath());
pstmt.setString(2,pdffile.getName());
pstmt.setString(3,pdffile.getParent());
pstmt.setString(4,filetype);
if (pfilesize != 0) {
pstmt.setLong(5,pfilesize);
}
else
{
pstmt.setString(5,null);
}
if (pdffile.isFile()) {
try{
//INSERTS ORIGINAL FILE................
int fileLength = Integer.MIN_VALUE;
is = new FileInputStream(pdffile);
fileLength= (int) pdffile.length();
pstmt.setBinaryStream(6, is, fileLength);
//INSERTS FILE WITHOUT PERMISSIONS
(THIS PART OF THE CODE IS LONG AND IRRELEVANT, IT JUST USES THE ITEXT LIBRARY TO MODIFY THE PDF FILE. AT THE END, I HAVE THE FILE IN AN OUTPUT STREAM, AS SHOWN HERE:)
ByteArrayInputStream inputnoimp = new ByteArrayInputStream(outnoimp.toByteArray());
pstmt.setBinaryStream(7,inputnoimp,(int)outnoimp.size());
} catch(Exception e) {
err = e.toString();
}
}
pstmt.executeUpdate();
con.commit();
pstmt.close();
this.closeConnection();
}catch(java.sql.SQLException e) {
err = e.toString();
}
}
Well, as I said, when I run the program, when it reads smaller files, there's no problem. But when it gets a big file, I get the OUT OF MEMORY error. I have another application that reads pdf files ONE AT A TIME, using a code very much like this one, and it reads big files (>30mb) with no problems. The problems is with this one.
Any help will be appreciated. If you have any question to clarify the problem, just tell me.
Thanks in advance.
Eric.
FTP Task Error When No Files Found On FTP
May 23, 2006Hi,
I have created a FTP task that logs into FTP server and receives files and scheduled it to run every 15min. However, it fails when there are no files on FTP. How would I check the if files exist? How can I catch the FTP task error and compare it to Hresults.NoFilesFound in a script task?
Thanks in advance for any help.
Error Updating Installed Files
Apr 30, 2006Well I need to know HOW TO REMOVE MANUALLY every pieace of the Database Services for my SQL Server Express CTP previous installation because the final release won't let me update this Database Services, any suggestion besides removing manually the services? thank you all
View 5 Replies View RelatedError Handling When Calling External Sql-Files
Oct 1, 2005I am using SQL Server 2000. I have some files with SQL-Statements.The SQL-Serveragent runs jobs which execute the SQL-Files:(e.g. osql /E /n /i \serverd$lager_pool.sql)How can I implement an error handling.If an error occurs, the script stops, and I can't read the variable@errorMy script - table xy doesn´t existSELECT * FROM XYSELECT @@errorSELECT 33The execution stops with an error after the first lineThanks for your help.aaapaul
View 3 Replies View RelatedPakcage Error...How To Read Files On A Different Domain?
Mar 2, 2006So did some troubleshooting on the my previous post -http://forums.microsoft.com/forums/ShowPost.aspx?PostID=272319&SiteID=1
Thanks to everyone who tried to help... So I got some insight into what is happening.
My package was having trouble reading files on a remote domain although I mapped the drives locally. This does not cause either running the package to failed either through directly running under VSS, or Execution Utility. But it failed when I try to schedule it through SQL server agent.
I wonder if it is the security context problem and asking for help of how to get around that issue.
So I have a for each file loop container that retrieve filenames on a remote domain which has a different security account then my local account. So how I got around that was to map that drive locally to a drive letter...example W:
then I use W: as my path within my package. I was trying to figure out where I can declare the connection within my package specifically, but don't know if I could do that.
If I run this through VSS or exectuion utility, it works okay. I was able to see W: and all the files on that mapped drive and read in the data.
However, when I schedule it under SQL agent, it doesn't see any files then exited the package as success right the way, because it has nothing to do....
So is there a different between the security context on mapped drive between VSS and my SQL agent? If so...How do I get around that challenge?
BTW, the two domain do not have share accounts between each others. I had to specified and map the drives explicitly.
THANKS!
JON
Script Files Failed To Load Error
Feb 24, 2006Hi all,
I have a package with a number of script components. All are set "PreCompile=True".
Within a Sequence Container I have a set of five script tasks each followed by an Execute Process Task. Each pair is linked but the five pairs are independent (hope this makes sense).
The first pair executed successfully but the other four all failed with the "Script files failed to load" error.
Anyone have a clue why this might happen or what I might change to solve the problem?
The package is scheduled under SS Agent so I'm currently thinking of taking these steps out of SSIS and putting them into the job. Not ideal but at least I can have some confidence that it will work.
Any suggestions would be very welcome.
Cheers,
Andrew
No Error Thrown By SSIS On Missing Configuration Files
May 17, 2007Hello All,
I have a package in which I have enabled "Package Configuration".
When I run the package i am sure that it reads the configuration file and executes the package correctly.
However if I remove the configuration file, the package still executes correctly with the settings which were used at the time of development.
I have event handlers for OnError and OnWarning and both these are NOT invoked.
IMO, this is incorrect behavior because if a package has been configured for "package configuration, then we should atleast have a warning generated that SSIS did not find the configuration and it would execute the package with hard coded values (from the time of development).
Is there any work around for this? how can I make SSIS warn me if the config file is missing for a package which was configured for package configuration?
AcquireConnection Error Importing DBaseIV Files Using SQL Agent
Jul 14, 2006I've got an SSIS package that I've been testing all week and it runs fine in Visual Studio. The package uses an OLE DB connection manager to access the dBase files using the Jet Provider. The dBase files are stored on a remote file share. There are a series of identical files held in different dated folders. I use a ForEach loop to move through the folder list and import the data as I go. When I deploy it to the server and try to run it, I get the following:
The AcquireConnection method call to the connection manager "Aloha" failed with error code 0xC0202009.
Aloha is the ConncetionManager to the dBase files. I've searched everywhere I can for ideas on how to solve this. I've made the SQL Agent Service is running under the same account I used to author the package. I've made sure that the package is using Server Storage. Everything looks like it should be working.
Can anyone give me any other items I can look into?
Thanks!
Barry Austin
SSIS - Excel Connection Error When Using Config Files
Mar 26, 2008I have several SSIS packages, some of which retrieve data from excel files - they work fine from th VS designer until I try to store configurations in a SQL database - then I get the following error:
SSIS package "ITAMdiv2.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ITAMdiv2, Connection manager "ExcelDIV2": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [84]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ExcelDIV2" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (84) failed validation and returned error code 0xC020801C.
any ideas?
Thanks in advance@!
Bob
Error 'Type 'SqlConnection' Is Not Defined' In VS2005/aspx.vb Files
Apr 17, 2008 I defined the following connection string (strConn) and coded "Dim oConn As New SqlConnection(strConn)".In this VS 2005/ASP.net 2.0 program, 'SqlConnection' was underlined and showed 'Type SqlConnection is not defined' error.
What wrong with my VS 2005/ASPnet 2.0 coding, or SQL Server 2000 database configuration?
TIA,Jeffrey
connectionString="Data Source=webserver;Initial Catalog=Ssss;Persist Security Info=True;User ID=WWW;Password=wwwwwwww"providerName="System.Data.SqlClient"
Error - Distribution Agent Failed To Create Temporary Files
Sep 17, 2014I've been using replication for a long while now but have never come across this error. It's a basic transactional replication from ServerA to ServerB, where ServerA is also the distributor. Everything had been running fine on it until yesterday, when this error started popping up and no further transactions could be delivered.
After some quick googling I was able to determine that the distribution agent account needed write access to C:Program FilesMicrosoft SQL Server100Com. According to the MSFT article it's because the distribution agent is running under a non-default profile. I didn't change this. However, what I did change around the time that these errors started occurring was the server's Replication Max Test Size setting. It would be far too coincidental for this to not be the cause, but what I don't understand is *why* that would have changed it.
how do I change this? It is definitely not preferable to create temp files in this directory in our environment.
SQL 2012 :: SSIS FTP Task Error Handling - Files Not Found
Nov 2, 2015When my ForEach Loop runs, when a file does not exist on the server, I am getting a File does not exist error.I would prefer to write a mesaage to my log and then move on to the next step successfully.When I got to Event Handlers and select OnTaskFailed, what do I want to do from here?
View 0 Replies View RelatedUnexpected Error While Removing Backup Files In Sql 2005 Setup
Dec 18, 2007
I was trying an edition upgrade from SQL 2005 standard x64 to SQL 2005 enterprise x64 using the "setup SKUUPGRADE=1" from the command line. The SO is W2003 server R2 enterprise and I have a SQL clustered environment with 2 nodes (active/passive).
I select to upgrade the SQL module and I mark the checkbox for the cluster installation. The installation seems to work properly untill setup is doing the task "removing backup files". Then 2 "unexpected error" message appears as follows. The 2 above windows appear when you click on the help icon.
Link to screen capture
The following is the end of the SQL setup log file:
________________________________________________________________________
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): RSVirtualDirectoryManager = Reports
Property(S): RSVirtualDirectoryServer = ReportServer
Property(S): SqlActionManaged = 3
Property(S): SqlStateManaged = 2
Property(S): Sql_sqlSqlUpgradeSequence = 387709900
Property(S): SOURCEDIR = I:Setup
Property(S): SourcedirProduct = {79F1B65E-8FC0-4D03-954D-F9E71C85AEC7}
Property(S): HotfixScript = 1
Property(S): DebugClsid.B2156BC9_6CE8_422F_A957_E99A65256B1D = {A42D1020-AA4C-401D-B7BD-26C333C0D627}
Property(S): SQLBROWSERACCOUNT = HEREISTHEDOMAINheretheclusteraccount
Property(S): ProductToBeRegistered = 1
MSI (s) (84:F8) [00:32:10:598]: Product: Microsoft SQL Server 2005 (64-bit) - Update 'Hotfix 3024 for SQL Server Database Services 2005 (64-bit) ENU (KB000000)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0024_SV00010-2_SQL.log.
MSI (s) (84:F8) [00:32:10:613]: Note: 1: 1708
MSI (s) (84:F8) [00:32:10:613]: Product: Microsoft SQL Server 2005 (64-bit) -- Installation failed.
MSI (s) (84:F8) [00:32:10:613]: Attempting to delete file C:WINDOWSInstaller75d5c.msp
MSI (s) (84:F8) [00:32:10:613]: Unable to delete the file. LastError = 32
MSI (s) (84:F8) [00:32:10:645]: Cleaning up uninstalled install packages, if any exist
MSI (s) (84:F8) [00:32:10:645]: MainEngineThread is returning 1603
MSI (s) (84:CC) [00:32:10:754]: Destroying RemoteAPI object.
MSI (s) (84:74) [00:32:10:754]: Custom Action Manager thread ending.
=== Logging stopped: 18/12/2007 0:32:10 ===
MSI (c) (34:B4) [00:32:10:832]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (34:B4) [00:32:10:832]: MainEngineThread is returning 1603
=== Verbose logging stopped: 18/12/2007 0:32:10 ===
_______________________________________________________________________
Does anyone have any clue or idea about the possible problem?
Error Creating Mdf - Connection To SQL Server Files (*.mdf) Require SQL Express 2005 To....
Apr 11, 2006Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I AM GOING TO RIP MY HAIR OUT WITH THIS PROBLEM. I have reinstalled both sql server express 2005 and VWD about 5 times with the same problem. please, please, please someone throw me a bone here and help me resolve this problem.
When I create a new EMPTY website and I rightclick on my website in the solution explorer and choose add item, I chooe SQL Database, I give it a name 'database.mdf' and click add. I get the following message:
you are attempting to add a database to an asp.net application. for a database to be gfenerally consumable in your site, it should be placed inside the 'app_data' folder. would you like to place the database inside the 'app_data' folder? I click YES (I know this message is normal)
then I get the following message:
Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I can add anything else but this damn mdf file.
thanks for all your help in advance.
Error 1601 Installing Microsoft SQL Server 2005 Setup Support Files
Dec 26, 2007Hi guys,
I have problems installing SQL server 2005, any help ??
Tks...
This is the log file description...
=== Verbose logging started: 25/12/2007 21:05:41 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:Archivos de programaMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (AC:50) [21:05:41:656]: Resetting cached policy values
MSI (c) (AC:50) [21:05:41:656]: Machine policy value 'Debug' is 0
MSI (c) (AC:50) [21:05:41:656]: ******* RunEngine:
******* Product: {53F5C3EE-05ED-4830-994B-50B2F0D50FCE}
******* Action:
******* CommandLine: **********
MSI (c) (AC:50) [21:05:41:656]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (AC:50) [21:05:41:656]: Grabbed execution mutex.
MSI (c) (AC:50) [21:05:41:671]: No se puede conectar al servidor. Error: 0x80040154
MSI (c) (AC:50) [21:05:41:671]: Failed to connect to server.
MSI (c) (AC:50) [21:05:41:671]: MainEngineThread is returning 1601
=== Verbose logging stopped: 25/12/2007 21:05:41 ===
Error 1603 Installing Microsoft Sql Server 2005 Setup Support Files
Feb 13, 2008I'm attempting to install the standard version of SQL server 2005 on XP SP2. I'm getting the following:
Errors occurred during the installation:
Error 1603 installing Microsoft SQL Server 2005 setup support files.
SQL Server Admin 2014 :: Separate Data Files / Log Files / TempDB / Backups
Jan 9, 2015I proposed on a new server that we separate Data Files, Log Files, tempDB, Backups, etc. onto separate LUNS on a SAN with High Speed Solid State Drives.I was told that with the new technology with solid state SAN's that it would decrease performance and that it did not work the same way as it did when you had RAID 5's etc.I thought that if things were cared out correctly by a SAN Administrator they would know how to configure for optimal performance.
View 2 Replies View RelatedFor Loop - Iterate From Older Files To Newer Files Based On File's Timestamp
Mar 13, 2008In the For Loop, How to Iterate from Older flat files to Newer flat files based on File's Timestamp. If there are some older files in that folder, it should be processed first and then continue with the newer one.
Any Suggestions?
Script Task: How To Compare Files On FTP With Existing Files In Local Folder Before Transfer!
Apr 24, 2008In the first step of my SSIS package I need to get files from FTP and dump it/them in a local directory, but it's more than that, the logic is like this:
1. If no file(s) found, stop executing and send email saying no file(s) found;
2. If file(s) found, then compare it/them with existing files in our archive folder; if file(s) already exist in archive folder, stop executing and send email saying file(s) already existed, if file(s) not in archive folder yet, then transfer it/them to the local directory for processing.
I know i have to use a script task to do this and i did some research and found examples for each of the above 2 steps and not both combined, so that's why I need some help here to get the logic incorporated right.
Thanks for the help in advance and i apologize for the long lines of code!
example for step 1:
----------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports Microsoft.VisualBasic.FileIO.FileSystem
Imports System.IO.FileSystemInfo
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Dim cDataFileName As String
Dim cFileType As String
Dim cFileFlgVar As String
WriteVariable("SCFileFlg", False)
WriteVariable("OOFileFlg", False)
WriteVariable("INFileFlg", False)
WriteVariable("IAFileFlg", False)
WriteVariable("RCFileFlg", False)
cDataFileName = ReadVariable("DataFileName").ToString
cFileType = Left(Right(cDataFileName, 4), 2)
cFileFlgVar = cFileType.ToUpper + "FileFlg"
WriteVariable(cFileFlgVar, True)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub WriteVariable(ByVal varName As String, ByVal varValue As Object)
Try
Dim vars As Variables
Dts.VariableDispenser.LockForWrite(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
vars(varName).Value = varValue
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
End Sub
Private Function ReadVariable(ByVal varName As String) As Object
Dim result As Object
Try
Dim vars As Variables
Dts.VariableDispenser.LockForRead(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
result = vars(varName).Value
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
Return result
End Function
End Class
example for step 2:
-------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Try
'Create the connection to the ftp server
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
'Set the properties like username & password
cm.Properties("ServerName").SetValue(cm, "ftp.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0") 'The 0 setting will make it not timeout
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
'create the FTP object that sends the files and pass it the connection created above.
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
'Connects to the ftp server
ftp.Connect()
'ftp.SetWorkingDirectory("..")
ftp.SetWorkingDirectory("directoryname")
Dim folderNames() As String
Dim fileNames() As String
ftp.GetListing(folderNames, fileNames)
Dim maxname As String = ""
For Each filename As String In fileNames
' whatever operation you need to do to find the correct file...
Next
Dim files(0) As String
files(0) = maxname
ftp.ReceiveFiles(files, "C: emp", True, True)
' Close the ftp connection
ftp.Close()
'Set the filename you retreive for use in data flow
Dts.Variables.Item("FILENAME").Value = maxname
Catch ex As Exception
Dts.TaskResult = Dts.Results.Failure
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
SQL 2012 :: FOR FILES Command To Delete Old Backup Files On Remote Server?
Feb 24, 2015I have the need to delete old backup files via TSQL job. Found this solution online:
PushD "
emoteservershareDIFF" &&(
forfiles -m *DIFF*.sqb -d -1 -c "cmd /c del /q @path"
) & PopD
It works remotely if I run it via command prompt. But when I add this to a TSQL job on my remote SQL instance, it runs without deleting anything. What I'm missing?
HELP!!! Cannot Import SSIS Package Files From .dtsx Files
Oct 8, 2007
Brief overview...Running SQL Server 2003 Server Enterprise 64 bit - All Service Packs and patches current
SQL Server 2005 Enterprise Edition 64 bit Build Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
I cannot import any SSIS packages nor crete any new folders under stored packages. I hve googled the news groups and looked at BOL to no avail. HELP!!!!
Is It A Good To Replace SQL Script Files With XML Files?
Jul 23, 2005I am thinking about replacing the INSERT data scriptfiles that I have with XML files. This way I can open the XMLfile using an XML Editor and see the values in a GRID andmake changes easier.Do you see any problem with this approach?I managed to put together some code that is exportinga SQL table with its data to an XML file and also a codethat reads the XML file's data and inserts it into a table.Now I am researching on XSD, td:datatype, DTD...(I am new to XML) in order to figure out how I canuse a single xml file that will hold both the sql serverfields, the datatypes and their values.If you have links to some sample code that has anythingto do with the datatype export and import I am workingon, can you please share them with me?Most importantly what do you think about the idea of usingXML files vs sql scripts?Thank you
View 4 Replies View Related