DTS Error When Using Text File As Destination In DataPump Task
Nov 18, 2004
I want to export to a Text File (destination) from a SQL query using a DTS DataPump Task. My query has 28 columns, some how when I try to define the destination columns for my text file the Microsoft Managment Console Crashes completely.
I tough may be my query has two many columns only to find out that it has one to many. If I ramove a column form my query, any column. I get no error at all.
¿Is there a limit to a Text File destination connection?
I am scripting a DTS Package using VB. The problem I am having is that I get the following error when I execute the package from Visual Basic:
Step Error Source: Microsoft Data Transformation Services Flat File Rowset Provider Step Error Description:Incomplete file format information - file cannot be opened.
In the DTS Designer when I open the DataPump Transformation and click on the Destination tab I am prompted With the Define Columns dialog. I define the columns and click execute. The package works properly after doing this when executed from Enterprise Manager. Does anyone know how to script the file definition creation??? I have searched high and low through BOL and other resources and am not finding anything. I doesn't seem like it should be this hard to figure out so, maybe I am missing something.
I get this error when I execute a job calling a dts pkg. The package itself is fine and executes without any error.It's transferring around 400000 records. Shceduling the pkg gives the following error. Can any body led a hand please?
DTSStep_DTSDataPumpTask_1 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 1000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 1000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 2000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 2000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 3000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 3000 DTSRun OnProgre... Process Exit Code 1. The step failed.
I have a package that does simple exporting from an excel sheet to a table. I used a Dataflow task with Excel Source and OLEDB Destination Components. And i created Package configurations for Source and Destination Components. After than when i execute the package i get the following error.
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLLPL_Config2.dtsConfig".
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLDBCon2.dtsConfig".
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ProductDetails_Import, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
I was wondering if there is a way to 'Move File' with the File System Task inside of a For Each Loop container but to dynamically set the Destination path variable.
Currently, this is what I have: FileDestinationPath variable - set to C:TestFiles FileSourcePath variable - set to C:TestFiles FileNameAndLocation variable - set to blank
For Each Loop Container €“ Iterates through a folder C:TestFiles that has .txt files in it with dates in the file name. Ex: Test_09142006.txt. Sets the file path (fully qualified) to the Variable Mapping FileNameAndLocation.
Script Task (within For Each Loop, first step) €“ Sets the FileDestinationPath to the correct dated folder within C:TestFiles. For example, if the text files I want to move are for the 14th of September, it takes FileDestinationPath and appends the date folder to the end of it. The text files have a date in the file name (test_09142006.txt) and I am picking this apart (from FileNameAndLocation in the For Each Loop) to get the folder date. (dts.Variables(€œUser::FileDestinationPath€?).Value = dts.Variables(€œUser::FileDestinationPath€?).Value & €œ€? Month & €œ_€? & Day & €œ_€? & Year & €œ€?) which gives me €œC:TestFiles 9_14_2006€?.
File System Task (within For Each Loop, second step) €“ This is where the action is supposed to occur. I want it to take the FileDestinationPath and move the FileNameAndLocation file (from the For Loop) into this folder for each run.
Now as for my problem. I want this package to run everyday but it has to set the FileDestinationPath variable dynamically according to that day€™s date. Basically, how do I get this to work since I can€™t hard code the destination path variable from the start? I have the DestinationVariable on the File System Task set to the FileDestinationPath variable, after the script task builds it. However, using FileNameAndLocation as the SourceVariable on my File System Task tells me that the €œVariable €œFileNameAndLocation€? is used as a source or destination and is empty.€?
Let me know if I need to clarify further€¦...I may be missing something very simple. Any help would be greatly appreciated!
Hi, I am new to SQL Server. Trying to convert a pc sas program to a SQL Server 2000 DTS package. Need fixed format comma delimited destination text file from a DB2 data source. Problem: SQL wants to make financial field 19 bytes long but I want it to be 12. Tried casting as a DECIMAL(7,2) but SQL still wants it to be 19 bytes long. Tried converting to CHAR but then it is still left-justified. I need decimal to be in the third byte from the right. Is this possible?
I am trying to create a text file from an SQL query on a SQL table. I would like the SSIS package to prompt for the file name and path. The text file is tab delimited and the text qualifier is a double quote.
I am trying to load 14+ million rows from a text file into local Sql Server. I tried using Sql Server destination because it seemed to be faster, but after about 5 million rows it would always fail. See various errors below which I received while trying different variations of FirstRow/LastRow, Timeout, Table lock etc. After spending two days trying to get it to work, I switched to OLE DB Destination and it worked fine. I would like to get the Sql Server Destination working because it seems much faster, but the error messages aren't much help. Any ideas on how to fix?
Also, when I wanted to try just loading a small sample by specifying first row/last row, it would get to the upper limit and then picked up speed and looked like it kept on reading rows of the source file until it failed. I expected it to just reach the limit I set and then stop processing.
[SS_DST tlkpDNBGlobal [41234]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
-------------------------------- [SS_DST tlkpDNBGlobal [41234]] Error: The attempt to send a row to SQL Server failed with error code 0x80004005. [DTS.Pipeline] Error: The ProcessInput method on component "SS_DST tlkpDNBGlobal" (41234) failed with error code 0xC02020C7. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. ... [FF_SRC DNBGlobal [6899]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "FF_SRC DNBGlobal" (6899) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
------- After first row/last row (from 1 to 1000000) limit is reached: [SS_DST tlkpDNBGlobal [41234]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
--------------- When trying to do a MaximumCommit = 1000000. Runs up to 1000000 OK then slows down and then error. [SS_DST tlkpDNBGlobal [41234]] Error: Unable to prepare the SSIS bulk insert for data insertion.
[DTS.Pipeline] Error: The PrimeOutput method on component "FF_SRC DNBGlobal" (6899) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
---- When attempting all in a single batch: [OLE_DST tlkpDNBGlobal [57133]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Could not allocate space for object 'dbo.SORT temporary run storage: 156362715561984' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
So this one has been bugging me for a while and I am ready to punt...
Is it possible to dynamically create a text file destination in SSIS and then pump the results of a query stored in a variable to this text file?
So my package looks like this 1) SQL task that pulls back a list of tables to be exported 2) For Each Loop ADO enum that passes the table name to a SQL Task that builds the select...ie select * from <DTS.Variables()> 3) Data flow task that sets the command from variable from step 2 4) Text File destinaiton that is built using a varable as the connectionstring
I am delaying validation in steps3 and 4 above without any luck...basically I am curious if i can even do what I am thinking I should be able to do here...I get as far as getting metadata errors because SSIS can't seem to handle dynamically filling the pipeline with the columns from the variable/SQL statement.
Hi all, I got a unicode file source with this fields: -DT_WSTR (100) originally is DT_STR(100) -DT_WSTR (100) originally is DT_STR(100) -DT_NTEXT -DT_WSTR (20) originally is DT_DBTIMESTAMP -DT_WSTR (5) originally is DT_BOOLEAN
I export a Query result to a File (see above) ...as unicode TXT destination.
OK, now I must to re-import into another DB and here is my difficult...'cause the DT_NTEXT is HTML code and I got always this error: [Flat File Source [1050]] Error: The column delimiter for column "scheda" was not found. Scheda field is the DT_NTEXT.
Into connection manager area I modify the advanced tab for the set-up of my fields setting all to: Unicode string [DT_WSTR] with a variable of the len, but Try also to define everyone to the rigth type of the SQL destination like:
In every type of action I see no message alert and all seem to be good, but when I try to execute got always same error... So hope someone can help me... ----------- here first line of my UNICODE TXT source file ---------- "codven" "manufacturer" "scheda" "last_modified" "modificata" "CDGI2120" "Altri" "<datasheet><section ncellmax="1" id="1"><row order="1"><cell><![CDATA[Combat possiede mitragliatrici per intraprendere battaglie testa a ~testa del genere "spara o sei finito" in mezzo a territori ~butterati di crateri su carri armati del 23esimo secolo.~Caratteristiche:~* Cinque modalita' di gioco~* Tre tipi di carri armati~* Partita singola o in multiplayer~* Grafica in 2D, 3D]]></cell></row></section></datasheet>" "2007-12-11 13:02:26.290000000" "1" "CDGI2586" "Disney Interactive" "<datasheet><section ncellmax="1" id="1"><row order="1"><cell><![CDATA[Entra con Tigro ed i suoi amici nel meraviglioso Bosco dei 100 Acri aiutalo a cercare il miele nella natura incantata di questo fantastico mondo! ~~Il giocatore vestirÓ i panni di Tigro, il simpatico e buffo amico di Winnie The Pooh, il quale dovrÓ raccogliere quanto pi¨ miele possibile, per rendere la festa di Winnie qualcosa di veramente speciale!!!]]></cell></row></section></datasheet>" "2007-12-11 13:02:26.290000000" "1"
LEFT OUTER JOIN vwInventoryAllocMapping AS vwMap ON a.TNRAllocTypeID = vwMap.TNRInventoryAllocID
LEFT OUTER JOIN ABC.dbo.ZREFRESHTAB AS b ON a.DispenserID = b.Asset
LEFT OUTER JOIN ABC.dbo.TableJoinKey AS c ON a.TitleID = c.TITLE_ID
WHERE (vwMap.DataSourceID = 3) and vwMap.[DataSourceAllocName] = 'I'
group by c.SKU_NO , vwMap.[DataSourceAllocName],a.Qty , b.Profit_Center
order by c.SKU_NO,vwMap.[DataSourceAllocName]
GO
i have to send the result of aforesaid script in batch of 300 records per file (tab delimited text file) now the file name must be dynamically created as each file will contain 300 records.
I have found some document related to same issue on this url
I am trying to export data from a query in SQL Server 2005 SSIS to a flat file destination. Everything works fine except the rows returned from my query are written to the flat file in one long string (i.e., without line breaks). I have tried appending a new line character to the rows returned from the query but that only throws an error when the package is executed. My rows returned from the query are 133 characters wide (essentially only one column per row) so I have set the properties accordingly for a fixed width file format with 133 character wide rows.
Any suggestions or ideas on how to correct this would be greatly appreciated.
We've all seen this, where it uses an individual .write statement for each column.
Code Snippet
Public Overrides Sub AWCCogent_ProcessInputRow(ByVal Row As AWCCogentBuffer)
With textWriter
Dim item As Object
If Not Row.AddressID_IsNull Then .Write(Row.AddressID) End If .Write(columnDelimiter) If Not Row.City_IsNull Then .Write(Row.City) End If
.WriteLine()
End With
End Sub
But hard coding this seems not the smartest way. Especially since in my text file, there needs to be close to 100 columns. This could be a nightmare to update down the road. But I can't seem to find the object collection to loop through, like row.items which would seem to be logical.
Hi all, I got this scope: - SSIS and SQL server are on the same machine - myPackage run perfectly on debug mode and also via DTSexec choosing from stored package directory
My problem is when try to run the REAL job. Always got an error. ----- The import process has failed: Unable to complete the phase pre-esecuzione for component SQL Server Destination "(97). Error code returned: 0xC0202071. ----
This is a generic error and don't give me any feedback...one time is on data task A another to diffrent. SSIS pkg are compose by 34 data task...they insert into SQL server destination a RAW file source. SQL destination is the same machine of SQL server services and files are store to another machine...is a share like \BEWSSIS2007-12-18
I have try to run job with different agent (sql agent) and proxy user (same of the log-in sql server machine) where I 'm on. But always have error.
Now, I'm death point, 'cause PKG run ok into Debug and DTSexec...job is failure and all logs that I write ara vague. Some data task have big numbr of row like 95000, 625000, 53000.... But I have no one buffer error...anyway I have increase the defaultNumberOfMaxRow on the proprety for "my personal security" but no way out....
Can be a problem of buffer?? A memory problem, maybe I must use anyway DBole destination??
---------------------------- this error message on windows log under history SSIS...'cause I got an handler on PKG --------------------------- Messaggio
Executed as a user: LQS1 sql. ... Ersion 9.00.3042.00 systems to 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Start: 15.52.26 Error: 2007-12-19 15:53:26.52 Code: 0xC002F210 Origin: Important Team Activities Run SQL Description: Running query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ recipients = 'myemail @ importance =' High ', @ subject =' Import site hours 19/12/2007 15.53.03 is Failure in task: SSIS: error sku task to define, @ body = 'The import process is failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error:" Incorrect syntax near activity. ". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters that do not correct ... Implementation of the package ... not rius Step failed.
------------------------- SQLserver LOG from SSIS execution ---------------------- Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients'myEMAIL', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error in task boxes Home products', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection. Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEmail', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error in task boxes Home products', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(128). Error code returned: 0xC0202071. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(128). Error code returned: 0xC0202071. Unable to prepare activity Added mass SSIS for data entry. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(128). Error code returned: 0xC0202071. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEmail', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error task Payment methods tasks', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection. Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEMAIL', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error task Payment methods tasks', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection. Unable to prepare activity Added mass SSIS for data entry. Unable to prepare activity Added mass SSIS for data entry. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(169). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(169). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(169). Error code returned: 0xC0202071. Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEMAIL', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error task Payment methods tasks', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection. Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEMAIL', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error task Payment methods tasks', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(212). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(212). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(3409). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(3409). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(212). Error code returned: 0xC0202071. Unable to prepare activity Added mass SSIS for data entry. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(3409). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(188). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(97). Error code returned: 0xC0202071. Unable to prepare activity Added mass SSIS for data entry. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(188). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(150). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(97). Error code returned: 0xC0202071. Unable to prepare activity Added mass SSIS for data entry. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(188). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(150). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(97). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(150). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(509). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(509). Error code returned: 0xC0202071. Unable to complete the phase pre-esecuzione for component SQL Server Destination "(509). Error code returned: 0xC0202071.
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
I attempted to use Move Directory to move the contents of one directory to another.  I encountered the 'different volume' issue that others have experienced.  While this error is frustrating I can work past this particular issue. My more pressing question is why is the move directory command overwriting a destination directory?   When I setup the Move directory file task I provided two vars to hold src and dest location:
dest var:Â estserveroutput src var: devserverdev estfiles Set overwrite destination = TRUE
Why would Move Directory overwrite output folder at destination? Â Shouldn't it only overwrite if the testfiles directory exists at destination? Â This is very frustrating since I cannot find enough information in the official documentation to understand what is happening here. Â
Is it just me or does the documentation for Move directory seem.....incomplete?
I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.
My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.
How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.
Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?
Seems like this would be a common task...
Steps:
1. Execute SQL Task to see if the required table exists 2. Use expresions to test a variable to check the results of step 1 3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination 4. If table does not exist, 1st create it, then follow the normal Data Flow
I created a DTS package on my 2000 box. The package does a transformation from a SQL 7.0 database to a text file.
When I run this package manually, the text file is created correctly. When I schedule this package and it runs as a scheduled task, garbage is put into the text file.
We have a number of packages this is affecting, but haven't been able to determine a pattern.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Hi, I want to create a text file and write to text it by calling its assembly from Stored Procedure. Full Detail is given below
I write a code in class to create a text file and write text in it. 1) I creat a class in Visual Basic.Net 2005, whose code is given below: Imports System Imports System.IO Imports Microsoft.VisualBasic Imports System.Diagnostics Public Class WLog Public Shared Sub LogToTextFile(ByVal LogName As String, ByVal newMessage As String) Dim w As StreamWriter = File.AppendText(LogName) LogIt(newMessage, w) w.Close() End Sub Public Shared Sub LogIt(ByVal logMessage As String, ByVal wr As StreamWriter) wr.Write(ControlChars.CrLf & "Log Entry:") wr.WriteLine("(0) {1}", DateTime.Now.ToLongTimeString(), DateTime.Now.ToLongDateString()) wr.WriteLine(" :") wr.WriteLine(" :{0}", logMessage) wr.WriteLine("---------------------------") wr.Flush() End Sub Public Shared Sub LotToEventLog(ByVal errorMessage As String) Dim log As System.Diagnostics.EventLog = New System.Diagnostics.EventLog log.Source = "My Application" log.WriteEntry(errorMessage) End Sub End Class
2) Make & register its assembly, in SQL Server 2005. 3)Create Stored Procedure as given below:
CREATE PROCEDURE dbo.SP_LogTextFile ( @LogName nvarchar(255), @NewMessage nvarchar(255) ) AS EXTERNAL NAME [asmLog].[WriteLog.WLog].[LogToTextFile]
4) When i execute this stored procedure as Execute SP_LogTextFile 'C:Test.txt','Message1'
5) Then i got the following error Msg 6522, Level 16, State 1, Procedure SP_LogTextFile, Line 0 A .NET Framework error occurred during execution of user defined routine or aggregate 'SP_LogTextFile': System.UnauthorizedAccessException: Access to the path 'C:Test.txt' is denied. System.UnauthorizedAccessException: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, ileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append) at System.IO.File.AppendText(String path) at WriteLog.WLog.LogToTextFile(String LogName, String newMessage)
Hello, I get errors during import process from flat files to sql table (random missing rows) when I have more files to load through a "for each loop" cycle. If one of the files is not present (because not yet generated by an other process) many of the rows present in the next file are skipped during import operation. This happens even if the "maximumErrorCount" is set to 10000. The error reported is Warning: 0x8020200F at Import File Bolle , Source_Bolle [1]: There is a partial row at the end of the file Sql 2005 has Service Pack 2 installed. Can some one help me? Thanks and regards
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
I have a flat file which is loaded into the database on a daily basis. The file contains rows of strings which I load into a table, specifically to a column of length 8000.
The string has a length of 690, but the format is like 'xxxxxx xx xx..' and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.
Previously I used SQL 2000 DTS to load the files in, and it was just a Column Transformation with the Col001 from the text file loading straight to my table column. After the load, if I select len(col) it gives me 750 for all rows.
Once I started to migrate this to SSIS, I allocated the Control Flow Task and specified the flat file source and the oledb destination, and gave the output column a type of String and output column width of 8000. But when I run the data flow task it copies only 181 or 231 characters out of the 750 required. I feel it stops where it finds the SPACES and skips the rest.
I specified row delimiters or CR, and LF. I checked the file under UltraEdit and there were no special characters in the file that would cause the problem.
Any suggestions how I can get it to load the full data?
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
Hi, I am using the 'File System Task ' to create a directory structure (e.g ..DB; ..DBLOG; ..DBBACKUP; ) I set following properties for the single tasks: UseDirectoryIfExists = True; Operation = Create Directory;
The task works fine before installing SP1 on the server. Now it creates an ERROR if the directory already exists and it is not empty.
SSIS package "testcreatedirectory.dtsx" starting.
Warning: 0xC002915A at Create DB Directory, File System Task: The Directory already exists.
Error: 0xC002F304 at Create DB Directory, File System Task: An error occurred with the following error message: "Das Verzeichnis ist nicht leer.". (The Directory is not empty.)
Task failed: Create DB Directory
Warning: 0x80019002 at Create Directorys: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at testcreatedirectory: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Does anyone know if this is a known bug in SP1 or maybe its a feature and if there already exists a solution (maybe I have to set additional properties I have not discovered as yet).
I am trying to transfer all the data from Excel to SQL Server using the Script Task (since I got some issue with the Data Flow -- that is a different story, let us come to this error), and after it got transferred I am deleting the source file using File System Task.
[File System Task] Error: An error occurred with the following error message: "The process cannot access the file 'C:PrakashTestFilesNames.xls' because it is being used by another process."
The problem here is before transfer the data from Excel to SQL Server in the Script Task, the File System Task is getting executed, that is why it says that "it is being used by another process" like that.
I already set the TransactionOption as "Success" only for all the Tasks, but I don't know why the second task is getting executed before the first task completed his job.
If anyone have solution to this, pls let me know in detail ASAP.
I getting really frustrated here when trying to export a table with many columns into a text file. This does not happen when the table is relatively small. I am using client tools on my machine connecting into SQL Server 2000 (sp3) that resides on a different box. I have installed the client tools on my machine from scratch; no SQL server components were on it before. The version in the Add/Remove Program for SQL Server 2000 showed 8.00.194. Then I have upgraded my machine (Not the server) client tools into sp3a (sp3a). The version in the Add/Remove Program for SQL Server 2000 shows 8.00.761.
Now, the problem is when I try to create a package that export data into a text file and the source is a table or a view with many columns, even only 18 columns. Trying to define the column structure in the destination file using "Define columns" button on the Destination tab, I get error message "The instruction at "0x780014b1" referenced memory at "0x00000000". The memory could not be "read". and Enterprise Manager fails. This did not happened when I had version 194 before. only after installing sp3a. when I try to open a package that has been created in 194 version I can see the column definition of the destination, but again, it fails when I try to change it by "Populate from source" and "Execute". Also, I can't change the column size on the "Define columns" window (for fixed length destination), but I could do it on 194 version.
So: 1. How come the newer version is worse than the previous one ? I know that Microsoft has solved some problems relating to this issues (some MDAC changes and more). 2.What can I do to solve this problem. Do I have to have other version ?
I have a dts package that imports a text file into SQL Sever. If I right click "execute" on the package it works fine, but when I schedule the package to run as a job the package fails with the following error: DTSRun OnError: Copy Data from dw000200ar to [APDData].[dbo].[TblProb] Step, Error = -2147467259 (80004005) Error string: Error opening datafile: The specified user does not exist. Any help is appreciated.
