DTS Execute SQL Task Terminates Without Failing When Error Occurs (SP3)
Mar 21, 2001
I'm running SQL Server 7.0 SP3 and having trouble with DTS.
I have an Execute SQL Task that runs several stored procedures. When one of the stored procedures fails, the Execute SQL Task just terminates without failing.
I found a knowledge base article (Q238523) dealing with this situation but it was supposedly fixed in SP2 - I have SP3! The other work around suggested, issuing a SET NOCOUNT ON, does not always work.
Has anyone else run into this or have any other suggestions.
I hate the thought of spending days doing another work around in order get basic DTS functionalty to work as it should!
Thanks!
Jerry Dunn
gdunnjr@yahoo.com
View 2 Replies
ADVERTISEMENT
Jan 14, 2008
Hello everyone,
I have a package that extracts data from a Flat File. If any errors or truncation occur during the extraction of the input data, the package should fail. All fields that have erroneous values should be reported in the log file.
My Solution:
- I have created a Data Flow Task that contains a Flat File Source Adapter and a dummy destination.
- I have left the default "Error Output" configuration of the Flat File Source adapter, namely if a truncation or an error occur for a certain column, then the reaction is "Fail Component".
Problem:
This configuration gives me only the first erroneous column in the row being processed.
Question:
Is it possible to make the Flat File Source adapter continue parsing the current row before it fails? This way, I would be able to get all the erroneous columns in the row in one shot.
Thanks in advance...
Samar
View 6 Replies
View Related
May 9, 2007
Inside of an SQL Task (below), I have a call to a stored procedure with 7 parms.
[Audit].[spBatchPackage_OnExtract] ?, ?, ?, ?, ?, ?, ?
User:: ParentExecution_Idx Long
User:: Batch_Idx Long
System:: PackageName Nvarchar
System:: PackageID GUID
User:: TargetTable Nvarchar
System:: ContainerStartTime DBTimestamp
User:: DataFilePattern Nvarchar
In my SP I have this:
ALTER PROCEDURE [Audit].[spBatchPackage_OnExtract]
@Execution_Idx int
,@Batch_Idx int
,@Source nvarchar(1024)
,@SourceId uniqueidentifier
,@Destination nvarchar(1024)
,@StartTime DATETIME
,@FileSpecification nvarchar(2)
When I execute the SQL Task, I get this error:
[Execute SQL Task] Error: Executing the query "[Audit].[spBatchPackage_OnExtract] ?, ?, ?, ?, ?, ?, ?" failed with the following error: "Invalid character value for cast specification". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any help on clearing up this error would be appreciated!
View 12 Replies
View Related
Oct 19, 2015
I have ForEach Loop using Foreach File Enumerator. Within this loop I have SQL Task containing an Insert statement. When I run the Insert statement in query builder the transaction inserts data into a table as expected.
However, when actually running the process I am getting the error message:
Executing the query "INSERT INTO dbo.TEST_TABLE
..." failed with the following error: "Value does not fall within the expected range.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I currently have the ResultSet to "None" and have defined the parameter I am using. Where the process seems to joke is on my file_Name variable will I am trying to insert only part of the file name.
My insert statement looks as follows:
INSERT INTO dbo.TEST_TABLE
(IID, AN8, File_Type, IB_OB, File_Name, Processed_Flag, ReceiptDateTime)
VALUES
(
'1111',
'123',
'888',
'IB',
RIGHT(LEFT(?, LEN(?) - 4), LEN(?) - 24),
'I',
GETDATE())
View 0 Replies
View Related
Dec 1, 2015
I have an SSIS package which calls a command line app.When run in BIDS, it executes normally. The command line app is passed the arguments, does what it needs to do.When called as a SQL Agent Job (by the agent, or by me) it fails when calling the app, giving an exit code of 2 (which is an exception trapped by a try-catch). The SQL Agent service is running under my user (it's a test environment). The argument passed (from the log) is valid, and I've run it against the app, it provides the appropriate output.I can't for the life of me figure out what's going wrong.The app is passed an argument of a path and a password, and applies the password to the file, using interop.
View 13 Replies
View Related
Aug 15, 2007
Some more insight into the error I am getting.
It always occurs at the task (control flow) level and never at the component (data flow) level
It always occurs on the 'copy' action.
I have tried all the msxml/registry recommendations to no avail.
once again here are the error details
===================================
An error occurred while objects were being copied. SSIS Designer could not serialize the SSIS runtime objects. (Microsoft Visual Studio)
===================================
Could not copy object 'SQT Drop Create RAWMigDeal RAWBarrier table' to the clipboard.
(Microsoft.DataTransformationServices.Design)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=SerializeComponentsFailed&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
at Microsoft.DataTransformationServices.Design.ControlFlowClipboardCommandHelper.InternalMenuCopy(MenuCommand sender, CommandHandlingArgs args)
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.PersistImpl.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.SqlServer.Dts.Runtime.DtsContainer.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
View 7 Replies
View Related
Dec 6, 2006
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
View 5 Replies
View Related
Apr 20, 2006
I have a package that fails as soon as it hits the first Data Flow that contains a Derived Column task. The task takes three date columns and looks for a date of 6/6/2079. If it is there, it is replaced with a NULL. This task worked fine until I installed the Non-CTP version of SQL 2005 SP1, earlier today. (I went from RTM 9.0.1399 to SP1 9.0.2047)Does anyone have any ideas?
Here is the error I am trapping:
An error occurred while evaluating the function.
The "component "Update Max Date Value to NULL" (346)" failed because error code 0xC0049067 occurred, and the error row disposition on "input column "WeekEndingDate" (455)" specifies failure on error. An error occurred on the specified object of the specified component.
The ProcessInput method on component "Update Max Date Value to NULL" (346) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Thread "WorkThread0" has exited with error code 0xC0209029.
I tried to configure the error output to ignore the failure. The task succeeded. It did not insert anything, however, for the three columns in question. It then failed on the next Data Flow that contained a Derived Column task. I tried to pre-populate the columns with a default date, but no go. Any help would be appreciated.
View 10 Replies
View Related
Jun 5, 2006
When any of
my tasks or script tasks in my control flow, or data flow, have an
error, the entire package, and then the calling package fail, as far as
I've seen, through some CTP versions, beta versions, and the release
version of SQL Server 2005.
But, I've just made a change, in an
sproc called from an ExecuteSQL Task in a PreExecute event attached to
a DataFlow, and that ExecuteSQL Task is reporting an error in the
output window, but the package execution is not being stopped. Why not?
I see something like so
Error: 0xC002F309 at MyExecuteSqlTaskName, Execute SQL Task: ....
Task failed: MyExecuteSqlTaskName
Warning:
0x80019002 at OnPreExecute: The Execution method succeeded, but the
number of errors raised (1) reached the maximum allowed (1); resulting
in failure. This occurs when the number of errors reaches the number
specified in MaximumErrorCount. Change the MaximumErrorCount or fix the
errors.
repeated many times in the output stream, and the same thing for the PostExecute event attached to the same object.
I'm disappointed, because I want errors propagated upwards, as I'm used to.
I
looked, and as far as I can tell, all my ExecuteSQL tasks (in events
and in the regular control flow) have the default settings of
FailPackageOnFailure: False
FailParentOnFailure: False
MaxErrorCount: 1
Do
I have to go revise these settings on every ExecuteSQL Task in every
event handler in every SSIS package? (That will be exceedingly
tedious.) Do I set these on the ExecuteSQL task inside the event? Do I
set these on the event handler itself?
View 3 Replies
View Related
Apr 9, 2008
Hi,
I am using the SMTP Task to send an email to about 200 individuals with their own specific attachment. If it cannot find the attachment the SMTP Task fails.
Is there a way to log the failure and have it keep going? That way it will still process everyone, but I would get a list of those who didn't receive the email because there was a problem.
I looked at Jamie Thompson's blog and he had a great script to send out emails. But if I use that, I haven't yet figured out how to pass the filename variable to it and attach the file. Even if I use that script, how do I deal with the errors?
Thank you for the help.
-Gumbatman
View 6 Replies
View Related
Jan 23, 2008
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
View 12 Replies
View Related
Jun 20, 2007
hello
I have a problem with Sql task
when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue."
I'm using ODBC connexion for a csv file
someone can help me ?
thanks
View 4 Replies
View Related
Nov 8, 2006
hi chaps
i m getting the following ERROR:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "JDETimezone": "Unable to find column Timezone in the result set.".
i know what the problem is i.e. no row is returned then what is the problem
here you are.... i want to it work... strange... ok i explain...
actully i have some processign to do with variable JDETimezone even no row is returned.... can u tell me the alternative to do the follwing task...
I want to retrieve a record from some table and do some processing and if no row is present or returned then i want to do seperate processing.... can ne one help me out ?
regards,
Anas
View 4 Replies
View Related
Feb 18, 2007
I am running a Execute SQL Task which runs a script on a table. It gives me following error:
[Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow".
Thanks,
View 2 Replies
View Related
May 11, 2007
Hi,
I have a For Loop Container which has Execute SQL Task. The following SQL is not working in it.
Input Parameters: Batch_ID, Class_ID both of type long in the parameter mapping dialog.
The result set is of type 'One Row' and direction is input
Result set is: NextBatchID------>User::MinBatch_ID of type int
NextClassID------->User::MinClass_ID of type int
The query is giving very generic error
[Execute SQL Task] Error: Executing the query "" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Code Snippet
DECLARE @ClassID int
DECLARE @BatchID int
SET @BatchID = ?
SET @ClassID = ?
SELECT MAX(T.Batch_ID) AS NextBatch_ID, MAX(T.Class_ID) AS NextClass_ID FROM
(Select TOP (10) BD.Batch_ID, BD.Class_ID,
ROW_NUMBER() OVER(ORDER BY Batch_ID, Class_ID)AS RowNum
From dbo.Batch_Data As BD
WHERE (BD.Batch_ID > @BatchID) OR (BD.Batch_ID = @BatchID AND BD.Class > @ClassID)
ORDER BY Batch_ID, Class_ID) T
WHERE T.RowNum = 10
When I hardcode values the query works. With parameters it fails.
Any help/thought?
-Leo
View 7 Replies
View Related
Mar 2, 2006
I get the following error when trying to execute an sql statement in oracle and returning the results into an object variable with the execute sql task.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "select <columnlist> from <tablename>" failed with the following error: "The SelectCommand property has not been initialized before calling 'Fill'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
It executes fine if I select no results or first row but I can't get full result set to work. The query and connection string are valid. Any ideas?
View 8 Replies
View Related
May 4, 2006
I am using an execute sql task as the last step in an SSIS package. The task has an insert statement in it that will be appending some transformed data to the end of a large table in our database.
All tasks are executing correctly except for this last one. It is giving me the following error that I cannot puzzle out:
Error: 0xC002F210 at LINPRM_Append, Execute SQL Task: Executing the query
"INSERT INTO LINPRM
SELECT * FROM LINPRM_Append"
failed with the following error: "No disconnected record set is available for the specified SQL statement.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: LINPRM_Append
Does anyone have any ideas on how I might get past this error?
View 8 Replies
View Related
Aug 25, 2006
Hi:
I am getting the following error message while trying to run a Execute SQL task with Variables in BIDS. My connection type is ADO.NET . My Variables defined are
Varout and Varin. Both are String type Variables. @varout has a value set to "Category" and @varin has a value set to "Test Category". I am using the expression
" Select * into " + @[User::VarOut] + " FROM " + @[User::Varin]
The expression eveluates correctly. The error I get when i run the package is:
Package Validation Error. Failed to lock Variable "Select * into TestCategory from category" for read access with error 0XC0010001. The Variable cannot be found. This occurs when an attempt is made to retrieve a variable from the variables collection on a container during the execution of package and the variable is not there. The Variable name may have changed or the Variable is not being created.
Can anyone please tell me what I am doing wrong or where do I need to look at?.
Thank you
AK
View 3 Replies
View Related
Mar 28, 2006
Hi,
I am trying to execute a Stored Procedure using an Execute SQL Task. my stored proc contains various input paramaters. And the datatype for some of the paramaters are numeric (decimal). So when I am passing values to those paramaters using Exec SQL Task, I have used variables of type Object as it is not working properly even if I declare the variable type as "double". So I have used Object datatype for those variables and it worked properly.
But suddenly from yesterday onwards I am getting an error message (find below).
[Execute SQL Task] Error: Executing the query "USP_InsertData" failed with the following error: "Failed to convert parameter value from a Object to a Double.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If any one have idea on this, please let me know to rectify this error.
Thanks in advance.
Regards,
Prakash Srinivasan
View 3 Replies
View Related
Mar 25, 2008
I have a package A which has execute package task which tryes to execute package B.
I am able to execute package B directly but when i execut epackage A.Its able to open package B but its failing at the very first task in B.The error iam getting is like this
Error: The task "Setup Connections" cannot run on this edition of Integration Services. It requires a higher level edition.
Has any one come accross this before...Help
Thanks
View 1 Replies
View Related
Mar 12, 2007
hi frnds,
Till last week my SSIS package was running fine.
now it is throwing the below mentioned error:
SSIS package "DNB_GMS_PO_Transition.dtsx" starting.
Error: 0xC0202009 at DNB_GMS_PO_Transition, Connection manager "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod": An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'cedprod'.".
Error: 0xC00291EC at Taking backup of the affected tables, Execute SQL Task: Failed to acquire connection "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod". Connection may not be configured correctly or you may not have the right permissions on this connection.
Task failed: Taking backup of the affected tables
Warning: 0x80019002 at DNB_GMS_PO_Transition: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "DNB_GMS_PO_Transition.dtsx" finished: Failure.
i was unable to figure it out.but i had connected correctly to Database.
if i run those queries in the Query analyser with the same DB connection its running fine.
its urgent.
please tell me the soultion.
View 4 Replies
View Related
Feb 19, 2008
Hi,
I have a Load package which calls 3 other subpackages within it through the execute package task.
When i run the package thru batchfile it runs fine.
But when we run thru Autosys job scheduler i get the following error for the subpackages.
Code: 0xC00220DE
Source: Execute Package Task1
Description: Error 0x80070003 while loading package file "". The system cannot find the path specified.
i have given the path in the config file,which has the server name and the path of the subpackages.
Has anyone come across this situation before.
Pls help!
Thanks,
SVGP.
View 4 Replies
View Related
Feb 9, 2006
I'm trying to run a package from another package using Execute package task -
I'm getting the error:
Error: Error 0xC0012050 while preparing to load the package. Package failed validation from the ExecutePackage task. The package cannot run. .
I have Delay validation on the child package. Any other suggestions?
Thanks
View 13 Replies
View Related
Aug 20, 2007
My configuration database is made to work with both SQL Server 2005 and 2000, could this be an error that has to do with that?
Here is the query that I am using...
DECLARE @Server [nchar] (100)
SET @Server = (CONVERT(char(100), (SELECT SERVERPROPERTY('Servername'))))
INSERT INTO [tempdb].[dbo].[Server_Roles] (Server, ServerRole, UserName)
SELECT
@Server,
role.name,
member.name
FROM
sys.server_role_members rm
inner join
sys.server_principals member
ON
rm.member_principal_id = member.principal_id
inner join
sys.server_principals role
ON
rm.role_principal_id = role.principal_id
********Begin Errors***************
" failed with the following error: "Invalid object name 'sys.server_principals'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task I
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_role_members'.
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_principals'.
View 4 Replies
View Related
Jan 28, 2008
I'm converting a package from DTS to IS. My manager does not want to spend the time re-writing it to make use of the Script task so that's why I'm using a DTS 2000 task which contains some ActiveX.
The tasks themselves run fine when I'm in the designer and click the run button, but when part of the entire package it fails. I search on the error message and nothing comes up.
This is the error message:
Error: System.Runtime.InteropServices.COMException (0x8004043B): Exception from HRESULT: 0x8004043B at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
I've set them to run on the main thread but that doesn't seem to help.
Any help would be greatly appreciated!
Thank you,
Kelly
View 4 Replies
View Related
Mar 10, 2008
Hi
I am having trouble running a package in SQL Agent. The step involves zipping up a number of files using SQL Agent. I know in the error message it states "Access is denied" but I can run the package manually in BIS. Also I have applied a SQL proxy to the step using my own credentials which have rights to the file location, but still no luck.
I get the following error:
Error: 2008-03-10 09:04:02.04 Code: 0xC002F304 Source: Call ZipFiles Batch Execute Process Task Description: An error occurred with the following error message: "Access is denied". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 09:04:00 Finished: 09:04:02 Elapsed: 1.219 seconds. The package execution failed. The step failed.,00:00:02,0,0,,,,0
Does anyone know what the problem could be?
Thanks
View 19 Replies
View Related
May 7, 2008
I am getting the following error when I try to double click on an Execute Sql Task to open it using VS2005:
===================================
Cannot show the editor for this task. (Microsoft Visual Studio)
===================================
Method 'get_ParameterSize' in type 'GridRow' from assembly 'Microsoft.SqlServer.SQLTaskUI, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. (Microsoft.SqlServer.SQLTaskUI)
Please help!!
View 4 Replies
View Related
Mar 3, 2008
Hi All,
I have strange problem. I have a package task that is setup to run a package from a file source. The package ran fine originally but VS placed a shared drive letter for the path. I went back to change it to a UNC path and now the package fails and gives an error saying the connection is not valid and that it failed validation. Going back into the connection manager to check the path and it looks good, even pressing the Browse button shows the correct directory.
What am I doing wrong?
View 5 Replies
View Related
Mar 14, 2008
I am using the Execute SQL Task to call a sproc which I am not in the design stream for, so I can call it but I cannot change it. I need to deal with the issue of handling an error from a call to this sproc- the stored procedure does not return any output variables nor a return value that I can nail, all I get is a failure in the task. The sproc itself is just a straightforward insert into a table which can fail for any of the obvious reasons (PK violation, bad data, null data et al). The point is I want to know which rows failed in the insert (moving data from one databases table to another one row at a time wiith the sproc being inside a loop task over a recordset variable populated via a data flow call to a SELECT statement) so that I can flag then as such so that when I am finished in my loop I am left with a bunch of rows that did not make the trip from database A to databases B - within the loop, for each row that the sproc call is successfull, will hjave another sproc follow it to delete it from the original, but I cannot get this far when my INSERT sproc call fails. I have tried changing the MaxErrorCount to a big number - ceratinly more than I need but it does not seem to matter .lCan you help me out here - or is the design flawed anyway?
View 8 Replies
View Related
Jun 18, 2007
I have a stored proc which starts like this:
CREATE PROCEDURE dbo.AddAttachmentListItem
@ListID uniqueidentifier,
@AttachmentPath varchar (260),
@DeleteAttachmentAfterSend bit = 0
I have a Script task which generates a GUID and stores it in the variable @[User::AttachmentListId], which is of type System.Object since Guid wasn't an option. Following this is an Execute SQL task (with an OLE DB connection to an SQL Server 2000 database) whose SQL statement is
EXEC AddAttachmentListItem ?, ?, 0
My parameter mapping looks like this (variable name, direction, data type, parameter name, parameter size):
@[User::AttachmentListId], Input, GUID, 0, -1
@[User::AFilePath], Input, VARCHAR, 1, 260
When I execute my package I get the following error:
[Execute SQL Task] Error: Executing the query "EXEC AddAttachmentListItem ?, ?, 0" failed with the following error: "The type is not supported.DBTYPE_GUID". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This worked earlier when the first parameter was an int and not a uniqueidentifier, but I reworked my design because the GUID was a better choice for what I was doing. Well, at least 'til I got to this point....
Any ideas?
View 6 Replies
View Related
Jun 8, 2007
Hi,
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
Vivek S
View 1 Replies
View Related
Mar 10, 2008
Hi
I am having trouble running a package in SQL Agent. The step involves zipping up a number of files using SQL Agent. I know in the error message it states "Access is denied" but I can run the package manually in BIS. Also I have applied a SQL proxy to the step using my own credentials which have rights to the file location, but still no luck.
I get the following error:
Error: 2008-03-10 09:04:02.04 Code: 0xC002F304 Source: Call ZipFiles Batch Execute Process Task Description: An error occurred with the following error message: "Access is denied". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 09:04:00 Finished: 09:04:02 Elapsed: 1.219 seconds. The package execution failed. The step failed.,00:00:02,0,0,,,,0
Does anyone know what the problem could be?
Thanks
View 1 Replies
View Related
Feb 19, 2007
I am getting the following error when I execute my sql task:
An error occurred while assigning a value to variable "NullVar": " NO result rowset is associated with the execution of this query. "
I am executing a SP that has one input & one output parameter. The output parameter is returning a single row for debugging if the sp failes.
I tried using Jamie's method:(http://blogs.conchango.com/jamiethomson/archive/2005/12/09/2480.aspx) to get it to work but keep getting the above error. I have the following variables:
sqlSource (string) := Exec RBCprcsInsertWmsInvTransactionRecords '" + (DT_WSTR,10 ) @[User::SnapShotDate] + "', NULL"
NullVar (string)
In the execute sql task, I set the ResultSet to single row. I set SQLSourceType = variable & sourcevariable = user::SqlSource. In the result tab, I added a result set, NewResultName with the variable user::NullVar. I tried different configurations with the parameter mappings but nothing seemed to work. I didn't know if i still had to use this if I am using the sqlSource variable to drive the task.
So I am not sure what I am missing here. Anyone have any suggestions?
Thanks!
John
View 5 Replies
View Related
