I'm using SQL Server 2005 Enterprise x64 and when attempting to migrate a DTS from our SQL Server 2000 Standard x86 server I received the following error message:
DTS Migration Wizard Error
Could not load file or assembly 'Microsoft.SqlServer.Exec80PackageTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of it's dependencies. The system cannot find the file specified.
Click Abort to stop the migration of the current package.
Click Retry to retry the operation.
Click Skip to skip the migration of the current task and continue to the next task.
From the error message, it would appear something did not install or register correctly. Any idea on what is missing and how I can fix it?
In Visual Studion I invoke the wizard, indicate the source for the DTS packages and pick a folder for the migrated package but I don't get a list of my source packages. Instead, I get the error message, 'index out of range, must be non negative, parameter name index(mscorlib)'.
Has anyone ever gotten this error. What does it mean and how can I fix it?
I am unable to migrate any DTS packages, from a SQL Server 2000 package, from a structured storage file, or from a DTS package imported into SQL2005 (Developer Edition, 32 bit). Running the Package Migration Wizard, every time I get to the List Package screen, i get the error below. I haven't found any other mention of this so far. Anyone else seen this error or have suggestions?
I use the DTS 2000 Migration Wizard to migrate one of the DTS 2000 packages to SSIS. The migration failed with the following error message:
LogID=17 #Time=6:31 PM #Level=DTSMW_LOGLEVEL_ERR #Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework #Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.". ---> System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents) at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events) --- End of inner exception stack trace --- at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events) at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation) at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)
Looking at the call stack, it looks like COM wrapper fails on SaveToXML. Can someone tell me how I should workaround this problem?
I applied the DTS Migraiton Wizard to a DTS package and it worked fine with one BIG exception. The DTS package imports a fixed-width record, length about 1500 bytes, with 60+ "parse" lines (one per field). The migrated SSIS package did not preserve any of the parse structure. That's alot of error prone worke to recreate and we have another 3 DTS packages based on the same parsing. Any suggestions on how to preserve the parsing structure in SSIS?
From SQL Server Management Studio I right click on Management/Legacy/DTS and select Migration Wizard and enter a SQL Server Source and Destination. A list of DTS packages from the source server is displayed and I select one of the DTS packages and give the destination a unique name. The wizard runs and says it's successful. I can't find the new SSIS version of the DTS package with the new name that I've given it, however. Where does it put the new migrated copy of the DTS package.
I ran the upgrade advisor on a SQL Server 2000 DTS package and received the following:
Upgrade Function: Replace functionality of complex Data Transformation task encapsulated in Execute DTS 2000 Package task after package migration Message: The SQL Server 2005 Integration Services (SSIS) Package Migration Wizard does not migrate complex Data Transformation tasks in SQL Server 2000 Data Transformation Services (DTS) packages. The migrated package will contain encapsulated DTS functionality that must eventually be removed or redesigned.
When I run the Migration Wizard, it runs successfully, with no encapsulated DTS fuctionality that I can see. As far as I can tell from comparing the two, it looks like it migrated successfully without any help from me! I'm not familiar with the business logic of the DTS package, so am worried that I'm missing something.
Is it possible for the Upgrade advisor to be wrong? Are there any advanced or random screens that I can check for something that might not have migrated correctly?
Thanks for any insight that you can provide! Jessica
Thanks to Sean for helping me find the migrated packages. I'd like to edit one of the connections on a bunch of packages that I migrated. I see in the Run Package there are configuration options that would allow me to mofify the connection string at that point in time, but I would like to modify the package so it has the new connection string. I was thinking I could access it in BI Dev studio, but I'm not sure how to get to it. I suppose I could migrate to a file and then edit the file prior to importing, but I'm curious if there's a way I can modify the packages that show up under Integration Services/Stored Packages/MSDB.
It appears that the migration wizard is not installed with the developer edition of SQL 2005. I have installed another version of SQL 2005 and have run through the migration wizard.
With what editions of SQL Server the migartion wizard comes as a default ?
I am trying to import data from SQL 2000 to SQL 2005
The Data schemas are the same in both (tables, relationships, key and triggers).
Using the wizard I am trying to import data from SQL 2000 to SQL 2005. The issue I face is to manage the Idenity columns. I do not want the identity values from the SQL 2000 DB which may be at say 5000, instead I want to use the identity values from the SQL 2005 database which will problably start at 1
Is there a way to do this, should I use a custom query instead of a direct table dump. If using a custom query do I need to just specify a Select query or does it have to be a specific "INSERT INTO Table ..." type query
If I do import the data directly with Identity "ON" how can I advance the identity column value to current +1 on the SQL 2005 table.
When I tried to do a migration from access to Sql Server 2005 Express I got this error:
Unable to cast COM object of type 'dao.DBEngineClass' to interface type 'dao._DBEngine'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00000021-0000-0010-8000-00AA006D2EA4}' failed due to the following error: Interface wordt niet ondersteund (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)). An error occurred while loading database information. Conversion finished with 0 errors, 0 warnings, and 0 informational messages. There is nothing to process.
I've been migrating SQL 2000 DTS packages into SQL 2005 using the Migrate DTS 2000 Package wizard in Visual Studio 2005. All packages migrate fine except one which throws out the following error:
exception of type 'Microsoft.SQLServer.DTS.MigrationWizard.HelperUtility.DTSMWException was thrown
No other supporting information is given to help diagnose the problem. Has anyone else come across this error before? Looking at past threads, I've checked the DTS package for leading or trailing spaces which might cause an issue and there are none.
Hi there Apologies if I'm in the wrong post. I have a strange problem. I installed Sql Express Toolkit with the sole purpose to offer the import/export functionality in the Microsoft SQL Server90DTSBinn folder. After installation I did a quick test to make sure it works and it did. Suddenly now I get an error when I run the wizard file saying that it is not a valid win 32 application. I have a clean Windows XP S2 installation and definitly no virussus/worms etc. I have a simmilar problem when I try to run ASP.Net web starter kit files (.vss or something like that...) PLEASE help me!
. I get following message when the scheduled DTS job starts. ( it runs fine interactively)....
*** I've read other messages about SQLServiceAgent 'permissions' but how do you setup these permissions..
---------------------------------------------------------------------------- DTSRun: Loading... Error: -2147024809 (80070057); Provider Error: 0 (0) Error string: The parameter is incorrect. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 713. Process Exit Code 1. The step failed. ----------------------------------------------------------------------------- . Any help would be appreciated - Thanks
I am trying to perform DTS from a 7.0 server to a 6.5 server. But for one of the 6.5 servers, I am getting the following DTS Wizard error:
Error Source: Microsoft OLE DB Provider for SQL Server
Error Description: The catalog storedprocedures installed on server VACTBETA4 are version 6.50.193;version 07.00.0330 or later is required to support IDBSchemaRowset.Please contact your systemadmnistrator.
It is a production server and needs to be fixed. Help appreciated.
I am trying to export data from SQL Server to a Visual FoxPro database using the DTS export wizard and I get the same error message every time. After I select a destination (Microsoft Visual FoxPro Driver) and select a DSN is get a DTSA wizard error. It says:
Error Source: Microsoft OLE DB Provider for ODBC Drivers. Error Destination: (Microsoft)(ODBC Visual FoxPro Driver) SourceDB
I'm just trying to use the Maintenance Wizard for the first time, but the SQL Server Management Studio shows me an error message about 'Agent XPs' is not running on my server; and I should activate it through 'sp_configure'?
I've tried to understand 'sp_configure' by searching it on MS TechNet, etc. But of course, because I'm not a SQL Server expert user; I don't even know how to use 'sp_configure' at all....
Anyone know how to work this thing around? Appreciate all the help...
PS: I almost forgot to mention, that I'm using MS Windows Small Business Server R2 2003 with SQL Server 2005 Workgroup Edition.
I created a template with a Logo, Header data and Footer data. I then copied the report to the template directory. and renamed it report.rdl (replacing the default report that was there).
C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesProjectItemsReportProject
When I create a report using the report wizard I get the following error: Deserialization failed: The report definition element 'Report' contains more than one child element of type 'Language' at line 362, position 4. Line 362, position 4.
Edit code
The report works just fine when I created it and did a preview.
I was hoping to create a report template that I could substitute for the default report (report.rdl) so that when using the wizard the report would be created with logos, headers and footers already there.
If I put the original report back the report wizard works just fine.
Am I doing something wrong or is this not allowed.
I am having trouble installing and start SQl server on my machine. Currently, I am running Windows XP on my computer with service Pack 2. Not sure why but every time I try to execute the configuration instance , the start services portion does not execute and I get an error 0 message. Please help!!
Hi,I always use the following sql statement to check whether an email address exists in a database. With my latest project I tried to do this within the TableAdapter Configuration Wizard and it gave me an error: IF NOT EXISTS (SELECT Email FROM tblEmailList WHERE Email=@Email) BEGIN INSERT INTO tblEmailList (Email, DateRegistered) VALUES (@Email, @DateReg) SELECT 1 AS RESULT END ELSE BEGIN SELECT 0 AS RESULT END first it gave an error saying I must declare the variables @Email and @DateReg then when I removed the part of insert and just wanted to check the email address existence it gave me this error:The Compound statement SQL construct or statement is not supportedAny idea anyone?
I am having the following error when running the SQL upgrade wizard trying to upgrade SQL 6.5 to SQL 2000. Does anyone here know what is the problem ?
Version Switch has aborted because you do not have "Full Control" permission to one of the HKEY_LOCAL_MACHINESoftwareMicrosoftMSSQLServ* registry keys. Please use regedit32.exe to correct this problem and try again.
I have already checked the registry and I do have full control permission on HKEY_LOCAL_MACHINESoftwareMicrosoftMSSQLServ*. Please help.
When I try to run the ITW to increase performance I get this error in the event viewer. Earlier I have used the ITW with success but now I dont get any more index recommendations, just this error. Do you know what it means :
"The description for Event ID ( 4 ) in Source ( ITW ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Error in Parsing Event: execute sp_Sys'.
Hi. I've created a number of packages in SSIS which just make temp tables out of views. I did them with the "Optimize for many tables" and "Run in transaction" boxes checked.
Now I'm trying to port them over to another database on another server. I'm first going through the Package Configuration Wizard. When I try to finish the wizard I get a error with the following message:
quote:===================================
Could not complete wizard actions. (Microsoft Visual Studio)
===================================
Could not generate the configuration file. (Microsoft.DataTransformationServices.Wizards)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Wizards.ConfigurationWizardPages.ConfigurationWizardSR&EvtID=CouldNotGenerateConfigurationFile&LinkId=20476
------------------------------ Program Location:
at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.GenerateXmlConfigurationFile(DesignTimeConfiguration designTimeConfiguration) at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.OnFinish(CancelEventArgs e)
at Microsoft.SqlServer.Dts.Runtime.Package.ExportConfigurationFile(String str) at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.GenerateXmlConfigurationFile(DesignTimeConfiguration designTimeConfiguration)
I don't know how to resolve it. Anyone?
One way to deal with this particular issue would be just to recreate the SSIS package on the other server. The issue with this is I want to be positive which view I'm making a copy of and I'm not currently. Since the Import/Export has the transaction setting checked, I can't seem to determine what the source was. Help?
Could not complete wizard actions. (Microsoft Visual Studio)
===================================
Could not generate the configuration file. (Microsoft.DataTransformationServices.Wizards)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Wizards.ConfigurationWizardPages.ConfigurationWizardSR&EvtID=CouldNotGenerateConfigurationFile&LinkId=20476
------------------------------ Program Location:
at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.GenerateXmlConfigurationFile(DesignTimeConfiguration designTimeConfiguration) at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.OnFinish(CancelEventArgs e)
at Microsoft.SqlServer.Dts.Runtime.Package.ExportConfigurationFile(String str) at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.GenerateXmlConfigurationFile(DesignTimeConfiguration designTimeConfiguration)
When creating a subscription, if there is an error detected at the end - it creates the subscription but might not create the sql agent job, and it doesn't give you a chance to correct the error.
I have a very strange error (included at the end of message) and it seems to indicate that I have not installed the SQL Server correctly - perhaps the wrong version. I have re-run the configuration a couple of times with no effect. I have not removed the server and re-installed yet. I have Here is my version info:
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
TITLE: Microsoft SQL Server Management Studio ------------------------------ Could not start the wizard. ------------------------------ ADDITIONAL INFORMATION:
Could not load file or assembly 'ConfigureDistWizard, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (mscorlib)
I am trying to copy a database from our company's external SQL Server(production) to our local SQL Server(development). The Copy Database wizard fails on the step "Execute SQL Server Agent Job". Following is the error in the log file.. Please advise
InnerException-->An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)