I have a multi-step DTS package that I get the following error when I try to execute it:
Package Error
Error Source : microsoft ole db provider for sql server
Error Description : [DBNETLIB][ConnectionOpen (connect()).]SQL Server does not exist or access denied
Am I missing something obvious? I'm sure it is something simple but I can't seem to get it. Thank you in advance for you assistance.
I had just installed SQL 2005 dev on my laptop and got an error message when I tried to create a package using the BI IDE. I received the same error using VS2005 IDE. But the project was created regardless without any packages. When I tried to create a new package in the project, I received the same error again, but with an option to view the error details.
Following is the text of the error details:
TITLE: Microsoft Visual Studio
------------------------------
Error creating package
------------------------------
ADDITIONAL INFORMATION:
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
BUTTONS:
OK
------------------------------
I found a similar post that suggested that they try the following:
regsvr32 msxml3.dll
regsvr32 msxml4.dll
regsvr32 msxml6.dll
But msxml6.dll could not be found.
I did get a copy of this file from a coworker, and after copying it and registering it, I was able to add a package to the project.
My concern now is what is the likelyhood of this being the only file missing from the installation.
I'm wondering if I should reinstall, or (if it exists) do a repair on the installation.
Thanks.
Marshall
I want to do a simple package that will send an e-mail if the rowcount of a query is > 0.
I add the rowcount data flow component and assign a variable cnt.
In the precendence constraint I add the expression @cnt > 0.
When I run, I get the error The expression "@cnt > 0" must evaluate to True or False.
Please help!
Hello!
I want to make a very simple package: Export all rows in a table to a flat file.
This package I can create pretty much by only using the wizards.
Now to my problems:
1) I need the output to have this format:
H20070920161522
DS3 Plastpall trippelkrage 40 1
E00000000003
H is a header post, in this case with date and time following.
D is a details post, that is all the rows that was exported.
E is and end post, containing only the number of rows in the file, including H and E posts.
2) I need to set the file name dynamically, preferably using date and time to name the file.
I´ve done this very same thing in T-SQL, like so:
Code Snippet
USE AVK
GO
SET TRANSACTION ISOLATION LEVEL SNAPSHOT;
GO
SELECT *
FROM tempProducts
GO
CREATE VIEW EXPORT_ORDERS
AS
SELECT 1 AS ROW_ORDER, 'H' + REPLACE(CONVERT(char(8), GETDATE(), 112) + CONVERT(char(8), GETDATE(), 108), ':', '') AS Data_Line
UNION ALL
SELECT 2 AS ROW_ORDER, 'D' + COALESCE (CONVERT(char(10), LBTyp), '') + COALESCE (CONVERT(char(50), Description), '') + COALESCE (CONVERT(char(5),
Volume), '') AS Data_Line
FROM dbo.tempProducts
UNION ALL
SELECT 3 AS ROW_ORDER, 'E' + RIGHT('0000000000' + RTRIM(CONVERT(char(13), COUNT(*) + 2)), 11) AS Data_Line
FROM dbo.tempProducts AS tempProducts_1
GO
IF @@ROWCOUNT > 0
BEGIN
BEGIN TRANSACTION
SELECT *
FROM tempProducts
DECLARE @date char(8)
DECLARE @time char(8)
DECLARE @sql VARCHAR(150)
SELECT @date = CONVERT(char(8), getdate(),112)
SELECT @time = CONVERT(char(8), getdate(),108)
SELECT @time = REPLACE(@time,':','')
DECLARE @dt char(14)
SELECT @dt = @date + '_' + @time
SELECT @sql = 'bcp "SELECT Data_Line FROM avk..EXPORT_ORDERS ORDER BY ROW_ORDER" queryout "c:AVK_' + @dt + '.txt" -c -t -U sa -P dalla'
EXEC master..xp_cmdshell @sql
--WAITFOR DELAY '0:00:10';
DELETE
FROM tempProducts
COMMIT TRANSACTION
END
DROP VIEW EXPORT_ORDERS
GO
But I´m sure it can be done in SSIS aswell, giving me some nice options for i.e. error handling aswell.
Pointers please
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
dear friends,
i started using Asp.net for developing webparts, web parts automatically connect to a database to be created and saved in the database.
i had already Sql Server 2005 Express Edition installed so my webpart page ran and automatically created the database "AspNetDb" in the "App_Data" folder.
but when i uninstalled Sql Server 2005 Express Edition and then installed the Sql Server 2005 Enterprise Edition, it gave me the following Error 26 as below :
--------------------------------------------------------- Beginning of Error Message --------------------------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
--------------------------------------------------------- End of Error Message --------------------------------------------------
then when i checked the Machine.config file, i found this....
<connectionStrings> <add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> </connectionStrings>
then i thought it's becoz, of the datasource thing that the Machine.Config file supports by default the default free edition of Sql Server 2005 which is the Sql Server 2005 Express Edition.
but friend in my company we use Sql Server 2005 Enterprise Edition, so can anybody pls guide me and get me out of this soup on helping me to use Sql Server 2005 Enterprise Edition by modifying either 1) Machine.Config File and/or 2) Web.Config file and/or 3) any other way, but please help i want to do this, please......
regards and thanks
Gurjit Singh
Hi
My Server having DTS package even Job failing saying
"Error string: The specified DTS Package ('Name = 'ERP_Mater_Encript_Data_Move'; ID.VersionID = {[not specified]}.{T0I37w32-AB51-1SA4-9495-AcE6SSS4a321}') does not exist"
Please help regarding.
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
I'm using sql server 2005 and in sql management studio I am getting a syntax error from this simple below code:
WITH CustListTemp AS
(SELECT OrderID, Locked, OrderStatus, Resubmissions, ROW_NUMBER() OVER (ORDER BY OrderID) AS RowNumber
FROM dbo.OrderInfo
)
Can somebody please tell me what ther error is so I can correct it? I even had someone at work take a look at it and couldn't get it either.
Hey all,i have a students_table which i want to do a multiple update on.Update student_tableset grant = 35000where course_id = 2There are lots of students in the student table which have course_id of2.I get this error:Subquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used as anexpression.The statement has been terminated.Does anyone know how to do a multiple update like this.It seems such asimple thing but im confused*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHello all!
Working with SQL 2000. If I create a rollback trigger for a value that can not be less 0. After it rolls back, can I throw a custom error message in my .net application from SQL?
Thanks!
in SQL query analyzer i have this skeleton test query:
DECLARE @nLen int
DECLARE @strData varchar(200)
DECLARE @strDelim varchar(50)
DECLARE @nPos int
SELECT
OwnersName1
= (IF len(OwnersName) > 0 OwnersName
-- IF dbo.InString(OwnersName,'&',1) > 0 'yes'
--if dbo.InString(OwnersName,' AND ',1) > 0 'yes'
--if dbo.InString(OwnersName,', ',2) > 0 'yes'
--ELSE OwnersName
)
,
OwnersName2 = OwnersName
--@strDelim as Delim
FROM dbo.TateWake
WHERE OwnersName>'9'
i get this error:
Server: Msg 156, Level 15, State 1, Line 8
Incorrect syntax near the keyword 'IF'.
Server: Msg 170, Level 15, State 1, Line 8
Line 8: Incorrect syntax near 'OwnersName'.
if i replace
IF len(OwnersName) > 0 OwnersName
with: len(OwnersName)
there is no error.
what the heck is going on?
thanks...
this is my 3rd attempt at posting this. other attempts did not post for some reason. now i'm home from work and so i can't cut and paste. this is from memory.
in query analyzer, i made a ridiculously simple query which returns a syntax error that i can't resolve:
SELECT name1 =
(
IF len(name) > 0 len(name)
),
name2 = name
FROM ownertable
this gives an error something like:
syntax error near IF on line 3
when i remove the IF len(name) > 0
the expression is evaluated as expected with no error. what is going on?
I must apologize for the simplification, but my posts kept going to the ether for some reason. I have had other dba's look at it and no one knows why this is happening in my office. nor can i understand why my posts don't stick. i even got a message from the forum app that i posted a duplicate message!
Hi,
I am using this query to execute but it didn't
declare @AccountID numeric(3,0)
set @AccountID = 101
select * from AccountTest
WHERE AccountID IN
(CASE
WHEN @AccountID = 101 THEN (100,101)
ELSE @AccountID
END)
I m getting error like
Msg 102, Level 15, State 1, Line 9
Incorrect syntax near ','.
Pls help me out
T.I.A
Hello,When I received a message "... See the SQL Server errorlog for details...." I opened Management / SQL Server Logs where I see:Current - 2006-05-30 12:19:00Archive #1 - 2006-05-30 09:49:00Archive #2 - 2006-05-30 08:27:00etc.But each of these logs contains "0 Item(s)". How to see log entries?Thank you very much/RAM/
View 2 Replies View RelatedI've come across several references indicating that the recovery model can be set to simple by using the following sql statement:
ALTER DATABASE dbname SET RECOVERY SIMPLE
However, all I get is the error message below. What is the correct syntax?
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '.'.
Msg 195, Level 15, State 7, Line 1
'recovery' is not a recognized SET option.
Hi!
I've a big problem by using the following query :
Code Snippet
public SqlCeResultSet selectRSQuery(String query)
{
SqlCeResultSet resultSet = initializeCommand(query).ExecuteResultSet(ResultSetOptions.Scrollable | ResultSetOptions.Updatable);
return resultSet;
}
SqlCeResultSet resultSet = sgb.selectRSQuery(
"SELECT p.pId, p.pLogin FROM Profiles p, ProfilesGroups pg, Groups g " +
"WHERE g.gId = pg.tpGroupId " +
"AND p.pId = pg.tpProfileId " +
"AND g.gProfileID = '" + app.Settings.Default.id + "'");
It return me this error :
Cannot generate an updatable cursor for the query because there is a non-standard join expression.
What can I do??
Thxx
I am trying to copy data from a SQL Server 2000 DB to SQL Server 2005 DB using the import/export wizard in SQL Server Management Studio. The two databases are not identical with different table names and different columns but I thought I had set up all the right mappings and had set the 'Enable identity insert' option. When I ran the wizard it errored at the Pre-execute phase. I simplified the wizard down to one table and only as couple of varchar columns and this also errored in the same way. The error report is detailed below.
For reference the SQL2000(ent. edn) DB is on a windows 2000 server and the SQL2005(dev. edn) DB and the management studio are both on my WinXPSP2 workstation.
Could somebody explain why these errors have occured and more importantly how to rectify the problem?
Many thanks,
Michael.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Warning)
Messages
Warning 0x80047076: Data Flow Task: The output column "DateAdd" (23) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)
Warning 0x80047076: Data Flow Task: The output column "DateChg" (26) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)
... NOTE: I have removed the rest of the warnings as they were the same as above (many of them).
- Pre-execute (Error)
Messages
Error 0xc0202009: Data Flow Task: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
(SQL Server Import and Export Wizard)
Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination - Nrs_NewsArticles" (112) failed the pre-execute phase and returned error code 0xC0202025.
(SQL Server Import and Export Wizard)
- Executing (Success)
- Copying to [NereusV2_1].[dbo].[Nrs_NewsArticles] (Stopped)
- Post-execute (Stopped)
- Cleanup (Success)
Messages
Information 0x4004300b: Data Flow Task: "component "Destination - Nrs_NewsArticles" (112)" wrote 0 rows.
(SQL Server Import and Export Wizard)
So, here is my expression that I use in a textbox on the site header. In the report it just returns error... any ides?
="Wareneingangsübersicht" + " " + today() + " / " +
iif(datepart("WeekdayName",dateadd("d",1,today()))= "Samstag", DateAdd("d",3,today()), DateAdd("d",1,today()))
While running query below on SQL Server 2005 (Build 3790: Service Pack 2):
SELECT DISTINCT pkg.PrimaryBarcode
FROM dbo.Package AS pkg (NOLOCK)
JOIN dbo.PackageCycle AS pc (NOLOCK)
ON pkg.PackageKey = pc.PackageKey
WHERE (pkg.BillCycleDateKey >= 20061201) OR
(pkg.BillStatusKey = 1)
I received a partial result set followed by
An error occurred while executing batch. Error message is: Couldn't replace text
I suspect this is a memory issue, but cannot find any reference to this particular msg on the Microsoft forums or the other 3rd party forums. PrimaryBarcode is a varchar(50)
I am not sure where to go from here. I would appreciate any ideas. Thanks in advance.
Cheers,
Mike Byrd
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP
SQL Server 2000
Good day all,
I've been asked to create a DTS package that will execute 2 other DTS packages (yeah, I know... personally I want to write a sp for it *shrug*) and send an e-mail out reporting a failure and failure details.
So I have a couple of questions for you;
How do I pick up the error number (and description?) from a failed DTS and pass it to my sendmail task?
Is it possible to send anything other than plain text e-mails?
Can I change the e-mail priority to "high"?
I appreciate any help you can offer me :)
Why isn't there some documentation on how to do this. This should be really simple and it has taken me 2 weeks and I still haven't gotten an answer. Please Help Does anyone know the answner or some place where there is some documentation!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I get the following error when I try to substitute the strings in the databasedetails collection with variables:
Error: Object reference not set to an instance of an object. StackTrace: at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.CheckLocalandDestinationStatus(Database srcDatabase, DatabaseInfo dbDetail) at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferDatabasesUsingSpAttachDetach()
I created the following variables:
strDestinationDB = AirCL2Exp_new3
strDestinationDBPath = C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAAirCL2Exp_new3_Data.mdf
strDestinationLGPath = C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAAirCL2Exp_new3_Data.ldf
strSourceDB = AirCL2Exp
strSourceDBPath = C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDataDataNewAirCL2Exp_Data.mdf
strSourceLGPath = C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDataDataNewAirCL2Exp_Log.ldf
I then assigned those variable to DatabaseDetails Collection:
DatabaseName = @strSourceDB
DestinationDatabaseName = @strDestinationDB
Inaddtion I also assigned the following to the two DatabaseFiles Collection:
for 0:
DatabaseFileSize = 0
DestinationFilePath = @strDestinationDBPath
FileType = DatabaseFile
SourceFilePath = @strSourceDBPath
SourceSharePath = @strSourceDBPath
for 1:
DatabaseFileSize = 0
DestinationFilePath = @strDestinationLGPath
FileType = LogFile
SourceFilePath = @strSourceLGPath
SourceSharePath = @strSourceLGPath
Hi All,
We have written a multithreaded application in which we are maintaining separate Database connections for each thread. these connections are opened and closed at the start and exit of the thread.
We have observed that even if there is only one thread running ( application thread), execution of simple Select queries some times throws Native exception(Error - 0xc0000005 ).
This error comes intermittently. Execution of same query doesn't throw exception.
Further investigation by breaking the debug at the time of native exception and then looking into the stack trace shows that native exception has occured at one of the Native API (CompileQueryPlan() ) which is being called implicitly by the SQL Mobile.
Each time when we see native exception stack trace shows failure at CompileQueryPlan() call.
Let me know if this is a known defect in SQL Mobile 2005 or there is something else that is causing native exception.
Thanks,
Nikhil
I have been trying to export an sql2000 database to sql2005 with no luck. I continuosly get the error
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I have looked upon all support material and have installed the latest sql2005 service pack, but this has not fixed the problem. a simple query as:
select * from [transaction] ta,transactionentry tr
where tr.transactionnumber=ta.transactionnumber and
glacctid=6 and ta.[time]> '3/01/2006'
would produce this fatal error.
the current version I am using is:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
This problem is happening on some of the most important tables in the database.
the error log contains the following:
2006-06-06 11:43:32.59 spid54 ***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0001.txt
2006-06-06 11:43:32.59 spid54 SqlDumpExceptionHandler: Process 54 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
2006-06-06 11:43:32.59 spid54 * *******************************************************************************
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * BEGIN STACK DUMP:
2006-06-06 11:43:32.59 spid54 * 06/06/06 11:43:32 spid 54
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * Exception Address = 0136B4F0 Module(sqlservr+0036B4F0)
2006-06-06 11:43:32.59 spid54 * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
2006-06-06 11:43:32.59 spid54 * Access Violation occurred writing address FFFFFFFC
2006-06-06 11:43:32.59 spid54 * Input Buffer 260 bytes -
2006-06-06 11:43:32.59 spid54 * select * from [transaction] tr,transactionentry te where tr.
2006-06-06 11:43:32.59 spid54 * transactionnumber = te.transactionnumber and glacctid = 6
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * MODULE BASE END SIZE
2006-06-06 11:43:32.59 spid54 * sqlservr 01000000 02BA7FFF 01ba8000
2006-06-06 11:43:32.59 spid54 * ntdll 7C800000 7C8BFFFF 000c0000
2006-06-06 11:43:32.59 spid54 * kernel32 77E40000 77F41FFF 00102000
2006-06-06 11:43:32.59 spid54 * MSVCR80 78130000 781CAFFF 0009b000
2006-06-06 11:43:32.59 spid54 * msvcrt 77BA0000 77BF9FFF 0005a000
I have followed instructions on some support issues posted but none have helped. If anyone has any solution to this problem PLEASE HELP!!!!.
Thanks.
found it
View 3 Replies View RelatedHello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
hello it seems lack of c# skills is getting the better of me here...iv been trying to get this to work for hours now without success. I have just started working in c# so i am a beginner :)
all i want to do it query the database, check to see if a title exists, if yes then populate textbox saying 'title in use' but if the title doesnt exists then continue executing rest of code to add the title.
You'll notice iv tried to use string variables and sqlDataAdapter but i cant get these to work either...please help
so far i have this that keeps giving me the error that my button click is undefined: protected void bookButton_Click(object sender, EventArgs e){
//string title;try{SqlConnection conn1 = new SqlConnection();
conn1.ConnectionString =
"Data Source=Gemma-PC\SQLEXPRESS;" +"Initial Catalog=SoSym;" +
"Integrated Security=SSPI;";SqlCommand findTitle = new SqlCommand("SELECT title FROM Publication WHERE title='" + titleTextBox.Text + "';", conn1);
conn1.Open();
findTitle.ExecuteNonQuery();
/*
DataSet myDataSetTitle = new DataSet("PublicationTitle");
myDataSetTitle.Clear();
myDataAdapterTitle.Fill(myDataSetTitle);//myDataSet contains results from above SELECT statement
title = myDataSetTitle.Tables[0].Rows[0]["title"].ToString();*/
}catch(Exception ex)
{TitleInvalidMessage.Text = "Title Not Accepted: This title is already in use by another publication" +ex.Message;
}
//title does not exist in table so continue and add to database
//rest of code here