DTS Package File Error
Jul 11, 2005
An oddity has appeared in my MSSQL 8.0 SP3a instance; DTS packages which were working fine in the past can no longer be opened in Designer. Even when attached to the instance with the ‘sa’, I get the following errors:
**Package Error
Error Source: Microsoft Data Transformation Services (DTS) Package
Error Description: The System cannot find the file specified.
**DTS Designer Error
The selected package cannot be opened. The DTS Designer has been closed.
The packages themselves continue to run properly even through Agent, but when I attempt to open them for view or edit, the above errors appear. Note, not all DTS packages are displaying this behavior and there appears to be no obvious pattern to which packages are affected. When editing on the server itself, the packages can be opened and edited. Another peculiarity noted while looking into this one; while editing on the server directly, the option to save a given package in the Meta Data Services location is no longer an option. It is available when attached to the instance form a workstation.
Anyone seen this type of behavior before?
Thanks in advance!
View 5 Replies
ADVERTISEMENT
May 19, 2006
I had just installed SQL 2005 dev on my laptop and got an error message when I tried to create a package using the BI IDE. I received the same error using VS2005 IDE. But the project was created regardless without any packages. When I tried to create a new package in the project, I received the same error again, but with an option to view the error details.
Following is the text of the error details:
TITLE: Microsoft Visual Studio
------------------------------
Error creating package
------------------------------
ADDITIONAL INFORMATION:
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
BUTTONS:
OK
------------------------------
I found a similar post that suggested that they try the following:
regsvr32 msxml3.dll
regsvr32 msxml4.dll
regsvr32 msxml6.dll
But msxml6.dll could not be found.
I did get a copy of this file from a coworker, and after copying it and registering it, I was able to add a package to the project.
My concern now is what is the likelyhood of this being the only file missing from the installation.
I'm wondering if I should reinstall, or (if it exists) do a repair on the installation.
Thanks.
Marshall
View 12 Replies
View Related
Jan 31, 2007
Hi,
I use the DTS 2000 Migration Wizard to migrate one of the DTS 2000 packages to SSIS. The migration failed with the following error message:
LogID=17
#Time=6:31 PM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
---> System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)
Looking at the call stack, it looks like COM wrapper fails on SaveToXML. Can someone tell me how I should workaround this problem?
Thanks,
Bobby Fu
View 1 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Jul 23, 2007
Hello,
I deployed an SSIS project to my SQL Server. The project I deployed contained two packages. One called the other. After deployment I notice that both packages are indeed in the SQL Server. However when I try to run it I get the error below. This error happens during the "Execute Package Task" and the path the error is pointing at is my local development path, not the one it was deployed to. Is there any way to fix the path? And how can I get it to deploy both packages so it knows where they are when I run it from the server?
Error 0x80070003 while loading package file "C:VS ProjectsTestingRun Codes to DBRun Codes to DBSofAid_DBRefresh.dtsx". The system cannot find the path specified.
Thank You
Jaime
View 6 Replies
View Related
Aug 21, 2014
What do I need to stop this error?
Started: 5:05:48 PM
Error: 2014-08-21 17:05:50.64
Code: 0xC000F427
Source: File System Task
Description: To run a SSIS package outside of SQL Server Data Tools you must install File System Task of Integration Services or higher.
End Error
View 1 Replies
View Related
Jul 2, 2007
Hi
While trying to build SSIS Package Project, the following error is thrown. I have added configuration file recently to fetch the dynamic values such as connection string, output path etc.
I tried manually cleaned up the debug folder and tried build but still the error occurs.
Can any one help in suppressing this error?
Error 1 System.ApplicationException: Could not copy file "D:ExportExport.dtsConfig" to the deployment utility output directory "D:ExportinDebug". ---> System.IO.IOException: The file 'D:ExportinDebugExport.dtsConfig' already exists. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) --- End of inner exception stack trace --- at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CreateDeploymentUtility(IOutputWindow outputWindow) 0 0
Thanks in advance,
Prabha
View 1 Replies
View Related
Mar 8, 2007
Hi,
I have a package which calls another package. It had been working fine for a while. Recently I changed the connection managers' names. Everything in the parent package works fine. Database has been updated correctly. But when it comes to calling the child package it generates :
OnError,CRPRCHMSQCZ,,Execute AMSClientAgentMaintenance,,,3/8/2007 5:49:38 PM,3/8/2007 5:49:38 PM,-1073602332,0x,Error 0x80070002 while preparing to load the package. The system cannot find the file specified.
. (there is a period here instead of a file name)
I tested the child package on the server. It works fine. I connected the child package to the Execute Package Task by selecting from the packages on the server. So it is there for sure. Connection manager's name is read from the .dtsConfig. Child package is executed from my development machine but not on the server. I made a small test package just to call this child package, it generates the same error...
Any help is appreciated
Gulden
View 6 Replies
View Related
Mar 10, 2008
Hi,
I created a SSIS package which will generate an output file and place it on a remote fileshare location which will look something like this
\RemoteServerNameRemoteFilePath
The package is executing fine when I am executing it through BIDS or through execute package utility and writing the output file to remote file share location.
I created a SQL job for the package and ran the Job. Then, its throwing an error saying
Executed as user: DomainUser. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:33:06 AM Error: 2008-03-10 10:33:22.22 Code: 0xC020200E Source: DFT_Generate Output File Description: Cannot open the datafile "
\RemoteServerNameRemoteFilePathOutputFileName.txt". End Error Error: 2008-03-10 10:33:22.34 Code: 0xC004701A Source: DFT_Generate Output File DTS.Pipeline Description: component "FF_DST_Output" (160) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:33:06 AM Finished: 10:33:22 AM Elapsed: 15.891 seconds. The package execution failed. The step failed.
DomainUser have all the permissions on the remote file share location.
SQL server agent is running with the log-on account DomainUser(same as the above).
Could anyone help me in resolving this issue.
Thanks & Regards,
Sriram.
View 8 Replies
View Related
Feb 2, 2007
Hi,
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Is this possible?
Thanks for your help.
$wapnil
View 6 Replies
View Related
Sep 14, 2006
Hi guys,
Here's the deal. I have a child package, (say, pack01.dtsx), which uses a dtsconfig file for its connection string, which can be called from other packages, but which also can be called by itself.
However I also have another package (say, pack02.dtsx) which uses the same dtsconfig file for its connection string. It calls on pack01.dtsx.
When I use DTEXECUI and run pack01.dtsx, specifying the proper .dtsconfig file, it goes well. But when I try and run pack02.dtsx, an error occurs saying pack01.dtsx connection cannot be established.
How do I pass the connectionstring being used by pack02 to pack01, without having to remove the configuration file setting of pack01? Can a Parent Package configuration and a configuration file try and map to the same property?
Hope someone could help. Thanks.
View 7 Replies
View Related
May 19, 2006
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
View 10 Replies
View Related
Mar 4, 2008
Hi
My Server having DTS package even Job failing saying
"Error string: The specified DTS Package ('Name = 'ERP_Mater_Encript_Data_Move'; ID.VersionID = {[not specified]}.{T0I37w32-AB51-1SA4-9495-AcE6SSS4a321}') does not exist"
Please help regarding.
View 3 Replies
View Related
Dec 4, 2014
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
View 7 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
Jun 14, 2006
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
View 5 Replies
View Related
Jun 8, 2007
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
View 6 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Dec 13, 2007
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
View 1 Replies
View Related
Jan 17, 2007
I have a situation where I have Package A, which is called from Package B. Both packages have been designed to use config files for their connections, etc.
The issues arises when executing Package B. I can specify a config for Package B to use, but how do I tell the embedded package to use its correct config file?
By default, Package A has its config file pointed to development, but I would rather not have to save a special version of Package A that points to production.
I dont see any option within the execute package task.
Any ideas???
View 3 Replies
View Related
Mar 27, 2006
According to the help for SSIS, one method of deploying an SSIS package
to a SQL Server,
http://msdn2.microsoft.com/en-us/library/ms137565.aspx, is to use the
File...Save a Copy of <package file> as... menu option.
I don't have that menu option at all. And yes, the package is in
focus. My save menu options are simply; Save Selected, Save
<package file> As... and Save All.
I am using Version 9.00.1399.00 of the SSIS Designer.
At one time I did have the Management Studio's CTP installed.
However it was uninstalled before installing the tools from the
Standard Edition. (it would seem like not completely however)
Your help would be greatly appreciated. Thanx much.
p.s. Almost forgot to mention... I am already aware of using the
DTSInstall utility as a workaround. It should be noted, however,
that despite enabling the "CreateDeploymentUtility" property, the
DTSInstall.exe is not copied to the binDeployment directory.
View 11 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Aug 1, 2006
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
View 21 Replies
View Related
Mar 31, 2008
Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP
View 17 Replies
View Related
Sep 4, 2007
SQL Server 2000
Good day all,
I've been asked to create a DTS package that will execute 2 other DTS packages (yeah, I know... personally I want to write a sp for it *shrug*) and send an e-mail out reporting a failure and failure details.
So I have a couple of questions for you;
How do I pick up the error number (and description?) from a failed DTS and pass it to my sendmail task?
Is it possible to send anything other than plain text e-mails?
Can I change the e-mail priority to "high"?
I appreciate any help you can offer me :)
View 10 Replies
View Related
Jul 8, 2002
Can someone please tell me where to direct my ini file connection to another
platform. I would like to use the ini file but don't know where in the
DTS package I say go and use this file.
Can someone please direct me?
Thanks,
Dianne
PS I am using SQL server 2000
View 3 Replies
View Related
Jun 23, 2015
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file.  I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the  data from Source to Destination.
View 5 Replies
View Related
Aug 18, 2006
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
@[User::Variable] +(DT_WSTR,4) YEAR( GETDATE() )+"0"+(DT_WSTR,2) MONTH( GETDATE() ) + (DT_WSTR,2) DAY( GETDATE() )
The result:
C:Documents and SettingsmroushDesktopOSU20060818
the 20060818 part will change everyday ie.(tomorrow will be 20060819, next day 20060820 and so on.)
View 6 Replies
View Related
Feb 6, 2005
Hi Guys,
SQL Server 2000
I've run out of ideas on what to do with a DTS process that has suddenly started giving an error when one company is processed on it.
Here's the deal:
DTS package launches a complex set of stored procedures (built entirely without error handling) as a step in importing data from various customers. I have isolated the error to one segment where I have to cursor through records that have been identified as having changes. Unfortunately, this cursor is updating about 15 system tables and uses modular stored procedures, about 12 of them, to do the job.
Error: The classic Subquery returned more than one value.
Oddity: If I run the code in Query Analyzer I never get an error, the code finishes without complaints. If I run the exact same code via the DTS package I always get the error. Note that the cursor appears to process every row assigned to it and then the sproc throws the error.
What I've Tried:
1) The obvious, reviewing the code for any unprotected subqueries. Haven't found it.
2) Checking for @@Error = 1 at key points in the code to try to isolate where this is happening. Can't catch it.
Note that this same process is used for several other company's data import process and they do not error even when running the DTS package. Therefore I'm assuming it is a data issue with the one company that errors that is causing the problem.
Any suggestions on what to try next would be greatly appreciated!
Thanks!
View 2 Replies
View Related
Jun 8, 2007
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
What I can do to solve this issue.
Bye!
Daniel
View 1 Replies
View Related
Dec 27, 2007
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
View 13 Replies
View Related
Sep 5, 2006
I have used the copy database wizard, but I realized I had forgotten to shrink the transaction log file. So I canceled the wizard. My database, detached by the wizard, has now disappeared. The mdf file is still there, but when I try to attach it manually I get the "create file encountered operating system error 5 while attempting to open the physical file..." error.
Any way I can recover it?
Thanks.
View 4 Replies
View Related
Dec 21, 2006
Hi,
I am facing a problem on a server which has raid 5 solution (3 disks), the raid controller went down 2 of the disks were off in the Bios.
We added the 3 disks to a different server identical in brand and architecture, the raid controller was able to reconfigure the virtual drive H:.
All files were there, we installed sql server 2005 on the new server, but when we tried to attach the database we got the error below:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'myserver'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0x00000000af0000 in file 'C:Datamylog_log.LDF'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Operating system error 38(Reached the end of the file.) on file "C:Datamylog_log.LDF" during ReadFileHdr.
Could not open new database 'mydb'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 823)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=823&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I tried the following steps but it always failed:
- create a new db with the same name of the lost db;
- put the db in emergency mode;
- stop sql service and replace the mdf file;
- start sql service;
- Run Dbcc checkdb('mydb')
we got the error below:
Msg 945, Level 14, State 2, Line 1
Database 'ism0506' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
Any HELP please ?
Thanks,
Tarek Ghazali
Sql Server MVP
View 5 Replies
View Related
