I am trying to use my old DTS package from command line to pass a variable to ssis package but while trf XML text gets converted to Node as explained below
1) Job named as "Send MSG/DTS Messages" runs every 5 minute and calls Store proc €“
2) sRetrieveOutgoingMessages_G which fetches the ActionaID, QueueName, ServerName and Message Text to send to Queue and executes xp_cmsshell to execute DTS Package (Send Interface Message) from from command line
3) "Send Interface Message" DTS package runs and sends message xml to the Queue
We are facing problem with the XML text we pass as parameter to DTSRUN command, when we send this XML text from above given Store Proc (sRetrieveOutgoingMessages) that time it is well formatted but when we receive it in the DTS package task (ActiveX Script) that time spaces in values in XML text gets converted to Node, e.g, <Address>"9598 Newark Liberty International Airport "</Address> becomes <Address>"9598" <Newark>"" <Liberty>"".
I'm using Script Component to load data into Oracle DB due to the poor performance issue. Now, I found it will missing some data during the transmission. Please see the screenshot below:Â
I setup this package to import data from a Sharepoint list to a SQL Server data table. The primary key of my SQL table is mapped to the Title column of my Sharepoint list. There is a possibility that duplicate values will be entered in the Title field of the Sharepoint list. So when importing data into my table via SSIS, my package always error-out when there it comes across duplicate values. how you others have managed data integrity when importing from a Sharepoint list with the Title column being mapped to the primary key of a table.
I have an odd problem that is driving me nutz. I have a very simple SSIS package that imports a 5 colum flatfile into a sql Server 2005 Table.
When I created this package with the wizzard, it will execute perfectly fine and processes all rows into the destination table.
But when I hit F5 to execute it manually it will fail before inserting a single row.
The error it generates is (Spalte 5 is a Datetime in the format DD.MM.YYYY) :
Error: 0xC02020A1 at Datenflusstask, Source - Daten_NC_1_txt [1]: Data conversion failed. The data conversion for column "Spalte 5" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Datenflusstask, Source - Daten_NC_1_txt [1]: The "output column "Spalte 5" (25)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Spalte 5" (25)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Datenflusstask, Source - Daten_NC_1_txt [1]: An error occurred while processing file "C:WorkDaten_NC_1.txt" on data row 177.
Edit: Modified the Title so it properly reflects the Problem & the Solution
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task. I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert. Thanks
I am Crystal Reports Developer and I am new in SSIS environment. I have started to read Professional SQL Server 2005 IS book. I am really confused by many tasks to choose.
I need to develop reports from data warehouse. But before I have to send the data from operational database (SQL Server 2000) to warehouse (SQL Server 2005) monthly - I have a script for retrieving the data. For my package, I chose Data Flow Task, Execute SQL Task, and OLE DB Destination, and it does not work.
Please help me if I can look similar packages performing? Thank you!!
Hello All, I am migrating data from one database to another. I am using Multicast to seperate (legal street,legal mail and legal city) and (mail_street,mail_state,mail_zip,mail_city) also later after UNION of the above I am doing two lookups as I had to get contact ID and Customer ID from other two tables. In UNION i am matching (Mail street legal street) and so on.
I am getting double the data in the output. my input data is 1000000 and im gettin 2000000.
I manage to get the SSIS working. Now I would need to do these tasks.
I first want to get data from 2 different sql servers. What would be the best method to accomplish this? Both are in Sql Server 2005.
Secondly I want to make sure if any of the servers couldn't be found on the network or in any case the getting data task failed for any one of them the package won't continue and an email should be send to an email address.
Thirdly If everything is ok then I should combine both and generate one sequence no for them and save them on to another location and then generate a file with modified values.
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
I have begun using SSIS and I am a little taken aback by the complexity of it especially since I just want to do a simple data transformation such as in DTS. Are there any tutorials for data transformation for SSIS on the web/this forum and what if I want to do a simple transformation from Access to SQL Server?
I just moved to SQL 2005 and am facing a difficulty trying to build a DTS Package using SSIS Projects. I need to migrate data from an old Database design to a new Database design in my local pc.
Can anyone provide me some guidelines or tutorials on which components to use and a flow of the entire process which I should follow? I am confused.
Thanks alot in advance, hope to hear from you guys soon.
I have to take a hierarchical XML file and store it into a table.
I'm looking at the XML Source and it shows me all of the various XML tags as separate tables. I know that a lot (if not all) of the data can be denormalized so that I have flattened records in one table instead of multiple tables.
I was hoping the XML source would allow me to designate how to denormalize the data but it doesn't seem like I can without using a bunch of sorts and merges in the data flow to denormalize it which I'm trying to avoid.
Does anyone know if SSIS has any easy way to flatten XML data? I know about XSL transforms but I was hoping that there might be an easier method.
I have SSIS solution which has multiple packages and one Main package which starts all others.
I also have 2 Data Sources which I use on each package.
I need to do my testing on different Data Sources. When I try to change Data Source from one database to another - SSIS is getting confused and fails on the connections or starting to insert to the previous database.
Could you please explain the steps for doing it. What is the problem here? Can I use Windows Attentications in data source or use special account?
Also some confusion here with Config file. Should I create Config file just from Main package or from each package. For now I am working with a Source code, but later I would need to change connections string before running the executable. If I change the string in my Main package - would it be understandable in all others?
I have a Problem with my SSIS and it is that when you open the package it says "Validating <Data Flow>" and it takes a loooooong time to finaly open ( by long I mean like 3 or 4 hours to just for open!!!). In 3 of the DF, I have conections to a Unisys server and in exactly in this DF is where it takes its time. This Unisys system its kind a slow but not that slow. I am running on a server that have 4 G and 8 processors, so it cant be the machine.
my question is, How can I make it validate faster ? I have tried to work Offline but when I run the package I need to be online.
How to extract and Load Data using ADO.NET in SSIS.i hope to extract data we have DataReader source .but how to load (Insert) data with ADO.NET ?.and is ADO.Net quicker than OLEDB ?
I'm working with SSIS and using a third party data provider to a proprietary data source. SSIS wraps the provider in an ADO wrapper and everything runs perfectly.
So what's the problem? Well, I need to use this data provider multiple times in a package, and we have limited licenses for the provider. If I run the SSIS package by itself, once again it runs perfectly. The problem arises when I attempt to run the package in a job. When I run the job it hangs, because the data provider throws a modal warning window that runs in the background, telling me that I've run out of licenses.
It would appear that when I run the SSIS package independently, it makes the calls to the data provider sequentially because those tasks are sequential. However, when I attempt to run it as a job, it attempts to grab the multiple connections to the provider at the same time, causing me to run out of licenses.
Is there a way to modify this behavior in the job, and have it call those data connections sequentially?
Can anyone give me ideas on how I can update a table with new data while keeping the old data. Just append the new data - doing this in an ssis job? Ive been trying to use the ole db command transaction but i cant seem to get it working and I have about 10,000,000 rows this method would be slow.
I seem to recall reading a while back (in SQL Books Online) that it was possible to use the data pump classes independent of the whole SSIS package machinery. I'm trying to make a very efficient dBASE export and I want to try that pump, if possible. I'm going to do some research now, but if anyone happens to know that it's futile, please let me know so I don't waste too much time. Thanks.
Greetings, I am using SQL Server 2005 and I want a clue if there is some good built-in support to do the following. I want to transfer all the data from one source database to another destination database having same number to tables and schema like source database. I also want to ensure that the old data on the destination database should be secure too. I have an idea that this can be done through SSIS in coding but can anyone give me a guide, tip, link, sample code that can be helpful. Thanx a million in advance. Regards
have tried to import data from a big (257Mb, I has about 1.000.000) flat file into a table, inside SSIS. The process doesn’t work correctly. It stops in the same register (about 179.000). I have reviewed the process and have opened the file making it shorter (about 150.000 lines, including the line that before seems to break the process), and it works. Making the file longer it breaks the process again.
The error showed by the program:
Error: 0xC02020A1 at Data Flow Task, Flat File Source [2820]: Data conversion failed. The data conversion for column "debe" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Data Flow Task, Flat File Source [2820]: The "output column "debe" (4066)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "debe" (4066)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Data Flow Task, Flat File Source [2820]: An error occurred while processing file "Z:PROYECTOS ITSoluciones de negocioProyectosSANDOProyecto 5. CodificaciónETLcapun00108.unl" on data row 36804.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (2820) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Anybody knows what could be happening?
Any help would be very appreciated
Thanks
PD: I mean that it´s not a date format problem (I have reviewed some post talking about it)
Ok I wrote a SSIS package that will pull down data from my AS/400 and populate a SQL Server table with the data.
1)The data is being pulled from my China configured AS/400. It is configured to handle DBCS 2)The SQL Server tables are configured to handle DBCS by using the nvarchar datatype. 3)When I run this package on my machine against the production server, it works perfectly. 4)When I run this package on my test SQL Server against the production server,it works perfectly. 5)When I run this package on my production SQL Server it brings down all the records, but does not bring down all the fields. Most of the character fields are left blank.(not all)
I do not understand why this is doing this. Can anyone shed any light on this problem? Thank you.
I would like to replace data of some tables from STG to DEV database daily using SSIS package. Should I use "Transfer SQL Server Objects Task" to do that? Thanks.
I have a requirement based on 2 parts to determine a row of data in a table through SSIS :
a. Work out the LEG_SEQ_NBR of the VESSEL, VOYAGE and LEG already stored in table1.
To do this join table1 and join table2 through BL_ID column.
b. Work out the 2ndVESSEL, 2ndVOYAGE and 2ndLEG.
Once we have identified the LEG_SEQ_NBR of the VESSEL,VOYAGE, LEG already stored in table1 we need to add '1' to this value and then find that LEQ_SEQ_NBR in table2.
The DDL of table1 and table2 along with the test data are as below:
how to pass the numeric(12,0) data type to a variable in SSIS? what kind of variable data type should I choose? I am trying to assign object_key column ( numeric(12,0)) to a variable in SSIS
If i select int32 , it keep giving me an error: Error: 0xC001F009 at Row by Row process: The type of the value being assigned to variable "User::Object_Key" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
I have got Table A in database DB1 and Table B in database DB2 with same table structure. I need to compare the data in table A and Table B and add the missed records in Table B.
Can anyone help me on how to do this in a SSIS Package?
