How do I set an On Failure when a Tranform Data Task fails? I'm pulling in a text file and if the set the On Failure for the text file connection it says "Defining precedences between the selected items is not valid", and if I set the On Failure for the database connetion is doesn't execute when the tranform data fails. Any ideas on how capture this error?
View 3 RepliesI have a relatively simple SSIS package that I'm building for a data mining process. The package starts with an OLE DB data source, passes the results of a SQL Command (query) along to a conversion step, which then gets sent to a Term Lookup task. The Term Lookup then writes the result to an OLE DB Data Destination. Pretty simple. The OLE DB data source query returns about 80,000 rows if you run it through SQL WB. The SSIS editor shows 9,557 rows make it out of the source, and into the conversion step, 9,557 make it out of the conversion and into the lookup, and about 60,000 rows make it out of the lookup and are written to the results table. Then the package fails with the following errors listed on the progress screen. I was assuming that the 9,557 was some type of batching that was occurring in the process, but now I'm not so sure.
Thoughts?
Frank
[DTS.Pipeline] Error: The ProcessInput method on component "My Component" (117) failed with error code 0xC02090E5. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC02090E5.
[DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread1" has exited with error code 0xC0047039.
[My Data Source Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "My Component" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Hi,
I have to transform about 60 millions of data and it runs so slow that it never finishes in my testing. Should I have to process it chunk by chunk? Or is there any other techniques I can use (I am using data flow task). Thanks for advice.
Hi,
I want to know if it's possible to retrieve what kind of error have occurred when the on Failure workflow is execute in a DTS package.
Martin
We are unable to get a file from a VMS FTP site. The specific error message is:
View 5 Replies View RelatedHiYour help for the following query will be highly apprecaited. I'vewasted alot of time on it. Data definition is at the bottom.Thanks-----------------------------------Business need: User selects answers for few questions. Answers arepresented in the form of radio buttons.Questions Table:===================QuestionID QuestionName1 1.Rate your organization2 10.Opportunity in your group3 117.Effectiveness----------------------------------------Answers Table:==============AnswerId AnswerName QuestionID1 1.Best 12 2.Average 13 3.Wrose 14 1.Hardly Any 25 2.not too much 26 3.Average 27 4.Great Deal 28 1.Strong 39 2.Minor 310 3.Nothing 3--------------------------------------------------------Lets say User ABC answered below:For Question 1, she chose '2.Average'For Question 2: she left blankFOr Quesiton 3: she chose '2.Minor'And for user XYZ:For Question 1, she let blankFor Question 2: she left blankFOr Quesiton 3: she chose '3.Nothing'Then the Results table will look like this:Results Table:===============Resultsid QuestionID AnswerId User1 1 2 ABC2 3 9 ABC3 3 10 XYZ---------------------------------------------------Desired Output:===============User 1 10 117--- -- --- ----ABC 2 2XYZ 3Explanation:--> Show ALL distinct users on rows--> show ALL distinct QuestionName on the columns BUT only display thenumber before '.'--> Show the chosen answer (answername) for each user but only displaythe number before '.'-------------------------------------------------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[Questions]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)drop table [dbo].[Questions]GOCREATE TABLE [dbo].[Questions] ([QuestionId] [int] IDENTITY (1, 1) NOT NULL ,[QuestionName] [nvarchar] (1000) COLLATESQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY]GO-------------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[Answers]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[Answers]GOCREATE TABLE [dbo].[Answers] ([AnswerId] [int] IDENTITY (1, 1) NOT NULL ,[AnswerName] [nvarchar] (150) COLLATESQL_Latin1_General_CP1_CI_AS NULL ,[QuestionId] [int] NULL) ON [PRIMARY]GO----------------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[Results]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[Results]GOCREATE TABLE [dbo].[Results] ([ResultId] [int] IDENTITY (1, 1) NOT NULL ,[QuestionId] [int] NULL ,[AnswerId] [int] NULL ,[UserId] [nchar] (40) COLLATE SQL_Latin1_General_CP1_CI_ASNULL) ON [PRIMARY]GO---------------------------------------------INSERT Answers (AnswerName ,QuestionId)VALUES ('1.Best' ,1)goINSERT Answers (AnswerName ,QuestionId)VALUES ('2.Average' ,1)goINSERT Answers (AnswerName ,QuestionId)VALUES ('3.Wrose' ,1)goINSERT Answers (AnswerName ,QuestionId)VALUES ('1.Hardly Any' ,2)goINSERT Answers (AnswerName ,QuestionId)VALUES ('2.not too much' ,2)goINSERT Answers (AnswerName ,QuestionId)VALUES ('3.Average' ,2)goINSERT Answers (AnswerName ,QuestionId)VALUES ('4.Great Deal' ,2)goINSERT Answers (AnswerName ,QuestionId)VALUES ('1.Strong' ,3)goINSERT Answers (AnswerName ,QuestionId)VALUES ('2.Minor' ,3)goINSERT Answers (AnswerName ,QuestionId)VALUES ('3.Nothing' ,3)go-----------------------------INSERT Questions (QuestionName)VALUES ('1.Rate your organization')goINSERT Questions (QuestionName)VALUES ('10.Opportunity in your group')goINSERT Questions (QuestionName)VALUES ('117.Effectiveness')go------------------------------------INSERT Results (QuestionId ,AnswerId ,UserId)VALUES (1 ,2 ,'ABC')goINSERT Results (QuestionId ,AnswerId ,UserId)VALUES (3 ,9 ,'ABC')goINSERT Results (QuestionId ,AnswerId ,UserId)VALUES (3 ,10 ,'XYZ')go
View 2 Replies View RelatedI am having a problem with the scheduled task I am running. There had been an error message 5702 which says "The SQL Server is terminating this process". I don't understand what this means. And if I try to force the job to run, it says that the SQLExecutive service is not running on the particular server. And this prevents the task from being run. But when I try to check for the said service, it is running. I don't know what is happening here. Please help me.
View 1 Replies View Related
Hi all,
I have set up a package that copies data from one server to another server, then delete the data from the source tables. Now I want to add a task where it asks if the copying data was successful, then delete the data, ELSE stop the package and give an error msg, or some kind of a roll back so I don't delete the data without copying it to the destination server.
So what I want to ask is is that possible using Execute SQL task to write the script? if not how do I approach to it?
And I need some help with the roll back script as well..( IF previous task fails ..... ELSE Go on to the next task )
any help is appreciated!
MODERATOR COMMENT: Please don't wipe out your posts.
I have the following result set:
Code:
NameCode1Value1Code2Value2
A1020020250
B20300NULLNULL
CNULLNULLNULLNULL
I want to transform the columns into rows like this:
Code:
NameCodeValue
A10200
A20250
B20300
Any suggestions?
I'm just getting started with SSIS and need pointing in the right direction with my first attempt to create a simple transform lookup.
The objective is to copy some columns from a table in one SQL Server 2005 db into another table in a different db on the same server. There are some simple column transforms involved but one column in the target table needs populating from a lookup as a result of a SQL Query.
So far, I have one OLE DB Source object linked to one OLE DB Destination in 'Data Flow'. I've configured the column transforms and these appear ok. However, the problem is that I can't see how to setup the Lookup. I have added a lookup transform object to the Data Flow space, linked from the appropriate OLE DB Source. The simple sql query returns the correct value when previewed. If I try to connect the output of this lookup object with the same OLE DB Destination that is the output from the first column transform, I get a warning message : -
"Cannot create connector. The destination component does not have any available inputs for use in creating a path"
There is column in the destination table available but I don't know how to direct the lookup output to it. I can see this available column by looking at the OLE Destination object properties and clicking 'Mappings'. The other columns are showing the links in the transformation with the destination column intended for the lookup output is not showing any links.
How do I linkup the output from the lookup object to the OLE Destination object? Is it ok to have two inputs into the OLE Destination object (ie. 1. the output from the OLE DB Source; and 2. The output from the lookup object)?
Thanks in advance,
Clive
i use email task and it dosent send an email at all....this task causes an error..
If i need to set up email for the package if the package fails...
or how should i set in the sql server agent...iknow there is an option there but i dont know how to..
Please let me know...
Hi,
I tried to set up the send Mail Task and got the following message, however can't receive any message:
SSIS package "Package.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "Package.dtsx" finished: Success.
The program '[3628] Package.dtsx: DTS' has exited with code 0 (0x0).
Can somebody tell me why?
Thanks,
Hello,
When I run my package, a task will fail, however, the package will claim that it was successful. Why is this, and how can I trigger a failed package when one task fails?
Thanks in advance.
In my DTS package, is there any way to pass the task name and error description to another task that gets called on the task's failure?
View 1 Replies View Related
Hi,
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
Thanks
I have written an SSIS package with a Transfer SQLServer Objects task which I want to use to copy database objects from a SQL Server 2000 database to SQL Server 2005.
When I run this task, I find the following error:
[Transfer SQL Server Objects Task] Error: Execution failed with the following error: "Version80 database compatibility level is not supported
Is there a way around this aside from changing the compatibility level of my SQL Server 2005 database?
Any help is much appreciated.
Hi,
I am developing an SSIS package and need the execution of the package to continue even if one of the tasks within the package fails. I have an OnError event handler for this task which fires when it fails but want the rest of the package to continue.
Any suggestions greatly appreciated.
Thanks
I've got a couple of backup database tasks setup to run one after the other. The are set up the same, Alldatabases, backup to a device each, and overwrite every time. The task on databases full works fine but the one on logs fails every time, right away with the following rather esoteric error pulled from logging in the event log.
Event Type: Error
Event Source: SQLISPackage
Event Category: None
Event ID: 12550
Date: 29/01/2008
Time: 09:54:11
User: OILCATSsqlservice
Computer: GUNKVBPROC
Description:
Event Name: OnError
Message: The Execute method on the task returned error code 0x80004003 (Object reference not set to an instance of an object.). The Execute method must succeed, and indicate the result using an "out" parameter.
Operator: OILCATSSqlService
Source Name: Back Up Database Task 1
Source ID: {BF117128-FB4C-470D-AC00-4C68797C2C97}
Execution ID: {450BA60C-2EBF-453B-B3E4-80FBC2042F83}
Start Time: 29/01/2008 09:54:11
End Time: 29/01/2008 09:54:11
Data Code: -1073594108
What is this elusive Execute method that is only relevant to the log aspect of this task?
I'm "trying" to set up Replication. The Publishing/Distribution server is in one domain, and the subscribing server is in another. Both domains are fully trusted.
The synchronization step builds the .tmp file, but the repl_subscriber Distribution task bites the dust with an error message, "28000[Microsoft][ODBC SQL Server Driver][SQL Server] Login failed".
The setting on the distribution options dialog box is ODBC, SQL Server. I'm not using a special login/password. I've even tried putting a user name and password there, and it doesn't work. The ODBC connections test out fine on both servers. Any suggestions where I've gone wrong?
Thanks,
Layne
I'm perplexed and in need of a sanity check ...
Instance of SQL2K5-SP1 on Server2003R2. Created two databases Test1 and Test2, create single 2-column table (tblTest)in Test1 with one row of data. Create SSIS package to transfer the table and its data to database Test2 using "Transfer Objects Task". Fails with error code 1073548784.
I have tested for security issues and don't beleive these to be the cause: I have monster privelidges and can successfully use SSIS packages to execute CREATE TABLE etc.
Have also tried most combinations of Task options (eg COPY ALL OBjects etc etc)
Have tried this on three different servers: same results.
This simple test is the result of distilling down problems I'm having with SSIS manipulating some 60G within some 300 tables, so I'd really like to use the power this task promises!
My head is getting a little sore from scratching - any advice gratefully received.
Thanks
Hello All
I was trying to insert some row from one table to another of different database.
I was using Execute SQL task along with Foreach loop container.
In my execute SQL task I am using this query
SET IDENTITY_INSERT dbo.Table1 ON
INSERT INTO dbo.Table1
SELECT * FROM DB2.dbo.Table2
WHERE TableKey = ?
When executed I get this error:
failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
While the same query when executed in Management Studio Its successful.
The properties I set
For Each Loop Editor Settings:
1) Collection: a) Enumerator Set to ForEach ADO Enumerator
b) ADO Object Source Variable: User:bjectVariablename
c) Checked Rows in the first table
2) Variable Mapping: New Int Variable2 and Index = 0 to set it to first colunm.
3) Expression: Left blank
Execute SQL Task Editor:
1) General: a) Timeout : 0
b) CodePage: 1252
c) Result Set: None
d) SQLSourceType: Directinput
e) SQL Statement: SET IDENTITY_INSERT dbo.Table1 ON INSERT INTO dbo.Table1 SELECT * FROM DB2.dbo.Table2 WHERE TableKey = ?
f) BypassPrepare: False
2)Parameter Mapping: Variable Name : New Integer variable2 selected
Direction: Input
DataType: Long
ParameterName: 0
Can somebody help me in this regards.
Reference:
a) http://www.whiteknighttechnology.com/cs/blogs/brian_knight/archive/2006/03/03/126.aspx
Hi,
I am using an XML task for validating the XML data against the XML Schema. Let me describe the scenario, I am working on.
I have XML Files with different schema. I have different XSD files for each XML file type. I have used a for loop container which has a script task and an XML task. Script task gets the XML File and XSD file contents into variables which are, in turn, used by XML Task for validation.
XML task is configured in the option "Validate". I have provided the XML Data in variable and XSD file content in other variable. XML Task stored the result in another variable. FailOnValidationFail property set to false.
Every thing works fine until result of XML Task is false. If XML Task fails for one of the files, it fails for each subsequent files. If first file does not compile to schema and other files do, then XML task fails all the files because first file failed.
Is this a problem with XML Task or I have missed any property. Please, guide me through.
i have a package that contains a foreach loop container, in this container i have sql tasks, and execute package tasks, that end with a send mail task. if there something wrong with the smtp server, or it's down, the send mail task fails the package.
i don't want this to happen, what i want that if the send mail taks fails, the package will continue it's execution.
--i thought of using the event handler... but i don't know if it works...
thank you for any help!!!
Please excuse my ignorance as I'm a complete noob when it comes to vb.net.
I have 2 script tasks, each connected to an upstream task via Success and Failure constraints. Each script assigns a value to a variable, depending on whether the task succeeds or fails.
My code thus far is:
Code Snippet
Public Sub Main()
Dts.Variables("strEmailBody").Value = _
"Business Model Reporintg Control Complete - Status = Success"
Dts.TaskResult = Dts.Results.Success
End Sub
What i want to do is use a single script task depending on the success or failure of the package, setting the variable value accordingly.
If there are no errors Then
"Success"
Else
"Failure"
I've tried
Code SnippetIF CBool(Dts.Results.Success) Then...
But whislt it compiled, didn't evaluate correctly during runtime.
Can anyone suggest where I'm going wrong? Again I'm totally new to .net and I'm surprised I've gotten this far!
Thanks in advance.
Leigh
I have multiple task flows with precedence constraints and i have changed the constraint as completion to execute the package even though there is failure in one of the tasks in the package but every time the send mail success is executed instead of Send mail Failure task.
View 0 Replies View RelatedI am looping through xml files and validating them with the XML Task. On sucess I want to perform task 2, on failure I want to perform task 3. When one file fails to validate all subsequent tasks fail.
I have also tried putting the result in a variable instead of using the success constraint. I get the same result, the variable keeps the failed value after the first file fails. Any advise is greatly appreciated.
The Database Trasnfer Task has failed with the following error......failed with the following error: "Invalid object name 'dbo.exampleViewName.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
View 9 Replies View RelatedSend Mail task not working properly when it configured in Precedence Constraint (Failure)...
Scenario:
I'm using multiple containers in my ssis package. Also I have configured mail task for capturing error.
I'm getting mail only when error occurs in foreach loop container. If error occurs in other containers it doesn't works.
Actually I would like to receive mail notification on error when it occurs in any of the containers or DFT.
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
I have a stored procedure that is executed via a sql script task that returns a full result set. I map this result set to a variable or object type. Is there a way to use this variable as a data source in a subsequent data flow task?
A.
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.