I have a DTS Routine which archives a large amount of data into archive tables in the same database(Personally I would rather archive into a separate db but the paperwork for the customer involved in doing this is ridiculous).
The routine seems to archive all tables except for one (the largest one) However if I split the routine and run the rest of it first then the problem table then the table archives ok. To me it smells of transaction size or something but does anyone have any other ideas.. If it is transaction size, is there a way that I can break the routine down into multiple transactions?
Any help is as always greatly appreciated.
Cheers,
Chris
----------------------------------------------------------------
If we were meant to count in Hex, why do we only have X fingers?
----------------------------------------------------------------
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON Begin distributed Tran update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.TRANSACTIONMAIN set REPFLAG = 0 where REPFLAG = 1 and DONE = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.WBENTRY set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.FIXED set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.ALTCHARGE set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.TSAUDIT set REPFLAG = 0 where REPFLAG = 1 COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
I am getting this error :Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query: WITH MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]) SELECT NON EMPTY {SPEND} ON 0 ,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1 FROM [CUBE]
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp
. My workflow is as followed
********************************* For Each ADO.Record in Oracle (transaction=not supported)
If (Certain_Field_Value = 'A')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence A (Start a Transaction , transaction=required)
INSERT/UPDATE some records in SQLDB(transaction=supported) Finish Sequence A ( transaction should stop here) UPDATE Oracle DB ( Execute SQLTask, transaction=not supported) If (Certain_Field_Value = 'B')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence B (Start a Transaction , transaction = required)
INSERT/UPDATE some records in SQLDB (transaction=supported) Finish Sequence A ( transaction should stop here) UPDATE Oracle DB ( Execute SQLTask, transaction=not supported) If (Certain_Field_Value = 'C')
------------ ------------ End ForEach Loop ************************************* My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction. But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ". What is it that I am doing wrong? Regards KyawAM
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ] OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
http://support.microsoft.com/kb/839279 this didn't help
I am executing a stored procedure something like this
Create Procedure TEST @test1 @test2 AS BeGIN TRANSACTION ONE SELECT... UPDATE.. .... ....
.... TRUNCATE etc and lot of Select,update and delete statements like this ..... COMMIT TRANSACTION ONE
The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one. IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.
---------------------------------------------- dim conn, connectionstring
connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"
set conn = server.CreateObject("adodb.connection") conn.open connectionstring
----------------------------------------------
It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:
"Microsoft OLE DB Provider for SQL Server error '8004d00a'
New transaction cannot enlist in the specified transaction coordinator. "
I've never encountered this error before and I couldn't think of any solution... please help!!!
I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)
For instance, run these statements to set up a test: --DROP TABLE testTable1 --DROP TABLE testTable2 CREATE TABLE testTable1 (f1 varchar(1)) CREATE TABLE testTable2 (f1 varchar(1)) CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1) insert into testTable1(f1) values ('a')
So table testTable1 has a unique index on it..
Now try to run these statements:
--DELETE FROM testTable2 BEGIN TRANSACTION insert into testTable1(f1) values ('a') insert into testTable2(f1) values ('a') COMMIT TRANSACTION
SELECT * FROM testTable2
..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?
Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit
I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK
Configuration
Head office :Windows 2003 SP1 and Sql Server 2000 SP3
Failing Store:Windows 2003 SP2 and SQL SERVER 2005
Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000
At Store: Setting for MSDTC
Log on Account for MSDTC Service : Network Service
Network DTC Access = True
Allow Inbound = True
Allow Outbound = True
No Authentication Required = True
TurnOffRPCSecurity = 1
port Ranges for RPC = 5000- 5100
The error Message is as follows:
(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction. ) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )
If any one can help me, that will be great!!! Thanks in advance
I just got finished developing the company intranet site and thinking that everything was working I boasted about how good it was by getting my boss to login and submit a new job to the db (new job, its a work management app) while i did the same, the pland was to hit the submit button at the same time. He would send one to be read by me and I would send one to be read by him. We both hit submit and the following happened.
The db has somehow fused the two into one. I thought maybe we were to accurate in hitting the submit button together. But I even gave a five second delay between and for some reason the job is being overriden by one user tor the other. In other words we are both sharing the same jobid. I thought this could never happen with sql server supposing that it would lock one request until another was completed and vice versa. But I'm so new to this that I'm just so naieve to think that the db would do this for you. Problem is I'm about to move on and I can't leave the app in this state. Can anyone point to some articles or give some suggestions has to my situation. Most desperately in need!!
i'm having touble getting my sp done. the problem is as follow..i've found an sp tokenize (which works fine) with the following signature:
CREATE PROCEDURE TOKENIZE ( S VARCHAR(10000), DELIM CHAR(1)) RETURNS ( ID INTEGER, TKN VARCHAR(10000)) AS DECLARE VARIABLE I INTEGER; DECLARE VARIABLE LEN INTEGER; DECLARE VARIABLE FIRSTCHAR CHAR(1); DECLARE VARIABLE S2 VARCHAR(10000); begin ... SUSPEND; end^
then i build myself another sp (which also works fine) with this signature:
CREATE PROCEDURE GET_DICENTRIES_BY_ASDSKRPT ( ASDSKRPTINPUT VARCHAR(15)) RETURNS ( ID BIGINT) AS begin ... suspend;
end^
now, what i'm trying to do is write another sp (get_dicentries_by_all_asdskrpts) that accepts a '.'-tokenized string as a parameter (e.g. 'bla.bli.blo.blu'; number of tokens NOT fixed at 4!) and returns the intersection of
GET_DICENTRIES_BY_ASDSKRPT('bla'), GET_DICENTRIES_BY_ASDSKRPT('bli'), GET_DICENTRIES_BY_ASDSKRPT('blo') AND GET_DICENTRIES_BY_ASDSKRPT('blu')
Could someone help me get the following SQL statement working?SELECTstandardgame.gamename,standardgame.rowteamname,standardgame.colteamname,standardgame.dollarvalue,standardgame.gameid,standardgame.cutoffdatetime,standardgame.gametype,standardgame.gameowner,(100-COUNT(purchasedsquares.gameid)) AS squaresremainingFROM standardgameLEFT OUTER JOINpurchasedsquares ON standardgame.gameid = purchasedsquares.gameidwhere gametype='$gametype' and dollarvalue = '$dollarvalue' andgameowner = 'GROUP BY standardgame.gameidorder byCASE squaresremaining WHEN 0 THEN 1 ELSE 0 END ASC,squaresremaining ASCThe problem is... MySQL doesn't seem to want to let me usesquaresremaining in that case statement since it's not an officialcolumn name. Any idea how I can reference squaresremaining in the casestatement?
am an ASP.net developer and i've stucked in a C# windows application ... and i am the linking part ... between the Database and my application ... in ASP i have a wizard that handles getting the data from the controls ... but is it the same in C# windows application ? am using VS2005 TeamSystem... and widows Vista(framework 3.0) .... and this query is getting executed and return 1 ... and the intellecence is telling me to insert 4 strings
int rowseffected = loginNamesTableAdapter.InsertQuery(textBox1.Text.ToString(), textBox2.Text.ToString(), textBox3.Text.ToString(), textBox4.Text.ToString()); MessageBox.Show(rowseffected.ToString()); i don't know how to link the parameters with the controls ... please show me how ... thx... please help with images ... as i previously mentioned... this is a new experment in C# thx.
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False 'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i ' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
Using Vs2005 sqlServer 2005 When i try to connect i get this error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Connection string: <connectionStrings> <add name="pubsConnectionString1" connectionString="Data Source=.;Initial Catalog=pubs;User=mk;pw=x" providerName="System.Data.SqlClient" /> </connectionStrings> Calling code : try { using (SqlConnection cn = new SqlConnection(WebConfigurationManager.ConnectionStrings[0].ConnectionString)) { cn.Open(); } } catch (Exception ex) { Response.Write(ex.Message); }
I have a table adapter query with a like clause that I can't get to work. The field is "Type", so I have "LIKE '%@Type%'". When I click the Execute Query button to test, not only does nothing get returned, I don't get the chance to enter the parameter. If I change LIKE '%@Type%' to say, LIKE '%book%', the appropriate records are returned. I actually need to check two parameters. If I ad the second parameter, the where clause becomes(Type LIKE '%@Type%') AND (SendState = @SendState)When I test the query, a screen pops up to let me enter the state, but not the Type. I can't see anything wrong with the query, but something must be. Diane
I am having a most frustrating time getting this working. I have two machines, one named 'REMOTE' and it contains my SQL Server (2005 developer edition). Then I have my main PC, named 'DOUGAL' The server instance on the REMOTE computer is called 'SQLSERVER' and there is only one instance. The server is showing as running etc and I can log in locally on the REMOTE computer easily via the Microsoft SQL Server Management Studio etc. I have two logins that are working fine, sa and a login called 'db_user'.Now I am trying to connect in the server explorer in visual studio. When I try and connection i get the following error; An Error has occured while establishing a connection to the server. When connectiong to SQL Server 2005 this failure may be caused by the fact that under the default settings SQL server does not allow remote connections. (provder: Named Pipes Provider, error: 40 - Count not open connection to SQL Server). I have tried connection to 'REMOTE/SQLSERVER' 'REMOTE' and with its IP address to - without any luck. So, to fix this problem I have checked that remote connections are allowed (and restarted the system). I have also checked that named pipes and tcp/ip connections are enabled. I have searched around with the aid of my best friend, Google. However, I've only found suggestions that involve trying the fixes I already tried.
Ok, what I am tryin to do is quite simple i do believe. Basically I have an aspx page with a textbox, a button and a datagrid linked to my sql db. What I am wanting is for a user to enter in their Social Security Number in the text box and click the button. If the SSN matches a record in the DB then it binds to the datagrid and shows it, IF no match is found then it displays a link to click on to continue onto the next page. This is to stop duplicate entries. I can get one to work by itself but not both of them at the same time. Here is my code.<%@ Page Language="VB" %><%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %><script language="VB" runat="server"> Sub btnSearch_OnClick(sender as Object, e as EventArgs) Dim objConnection As SqlConnection Dim objCommand As SqlCommand Dim objAdapter As SqlDataAdapter Dim objDataSet As DataSet Dim strSearch As String Dim strSQLQuery As String ' Get Search strSearch = txtSearch.Text ' If there's nothing to search for then don't search ' o/w build our SQL Query and execute it. If Len(Trim(strSearch)) > 0 Then OK, Here is my first IF, this works. ' Set up our connection. objConnection = New SqlConnection("Data Source=BRADBLACKBUR-PCMSSMLBIZ;" _ & "Initial Catalog=Victorypoint;Integrated Security=True;") ' Set up our SQL query text. strSQLQuery = "SELECT FirstName, LastName, SSN " _ & "FROM Applicants " _ & "WHERE SSN LIKE '%" & Replace(strSearch, "'", "''") & "%' " _ & "ORDER BY SSN;" ' Create new command object passing it our SQL query ' and telling it which connection to use. objCommand = New SqlCommand(strSQLQuery, objConnection) ' Get a DataSet to bind the DataGrid to objAdapter = New SqlDataAdapter(objCommand) objDataSet = New DataSet() objAdapter.Fill(objDataSet) If objDataSet.Tables.Count < 1 Then Right here is where I am having the problem, I need to count the Rows not the Tables, but I dont know what code i should use here. Button1.Visible = True Else ' DataBind DG to DS dgSearch.DataSource = objDataSet dgSearch.DataBind() objConnection.Close() End If End If End Sub
I've tried to post this somewhere else, but I haven't gotten it figured out yet: I'm passing variables through a URL, and the page that accepts the variables has a where clause like this:"WHERE (name1 LIKE @name1 + '%') and (property_add like @property_add + '%') and (ctlmap = @ctlmap )"On the search page where the variables are entered, the user may not know all the information that goes into each input field. (If the user just knew the name, they would search by name. If the user just knew the address, they would search by address...etc.) Everything works great before I add the ctlmap variable. When the ctlmap variable is added, no search results will turn up unless there is an entry made to the ctlmap field. I know it has to have something to do with the ctlmap being set to equals rather than like, but I can't find a way to make the search work with a null value for ctlmap. Thanks, everyone. Additional Info: <SelectParameters> <asp:QueryStringParameter ConvertEmptyStringToNull="False" Name="name1" QueryStringField="name" Type="String" /> <asp:QueryStringParameter ConvertEmptyStringToNull="False" Name="property_add" QueryStringField="address" /> <asp:QueryStringParameter ConvertEmptyStringToNull="False" Name="ctlmap" QueryStringField="ctlmap" /> </SelectParameters> Here's another type of where clause that I tried but had no luck with: WHERE (name1 LIKE @name1 + '%') and (property_add like @property_add + '%') and (@ctlmap IS NULL or @ctlmap = ctlmap) This is how I would try to do it in php/mysql, but I don't know how to make it work in asp.net/sql: if ($ctlmap != "") { $whereClause = $whereClause." and ctlmp = '".strtoupper($ctlmap)."' "; } if ($whereClause != "") { $whereClause = " where ".$whereClause; }Here's the MYSQL counterpart:$sqlString = "Select distinct district, map, bill_group, ctlmap, bill_parcel, propertyid, special, property_add, name1 from MUR_bill_master".$whereClause";
I am having difficulty connecting to a SQL DB in my ASP page. Each time I run my application I receive the following error, "Login failed for user 'CX259ASPNET'". This is obviously something to do with permissions. I am all out of ideas but I will list the things I have already attempted to see if I either missed something or somebody can add to what I have already done.
1. In SQL Server I right-clicked the db -> properties -> security tab -> selected the option button to "SQL Server and Windows" instead of "Windows Only". 2. I installed SP3 and changed the sa password. 3. I created a new user under my db using the ASPNET account listed. I then changed the permissions to allow selecting, update, insert and delete access. 4. I also created a new user under my db using the IUSR account listed. I changed the permissions to the same settings as above.
I did a search on google which provided with all of the information above, but I am still stuck and hoping that this is a common problem and will be easy to fix.
Below is the code which I am attempting to use.
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If Not Page.IsPostBack Then Dim strConnString As String = _ "Data Source=(local);" & _ "Initial Catalog=Names;" & _ "Integrated Security=SSPI;" Dim objConn As New SqlConnection(strConnString) Dim strSQL As String = "SELECT * FROM [Names]" Dim objCmd As New SqlCommand(strSQL, objConn)
objConn.Open() MyDataGrid.DataSource = objCmd.ExecuteReader MyDataGrid.DataBind() objConn.Close() End If End Sub
What i am trying to do is concatenate variable "@Where" with CURSOR sql statement,inside a procedure . But, it doesn't seem to get the value for the @Where. (I tried with DEBUGGING option of Query Analyzer also).
============================================= SET @Where = '' if IsNull(@Input1,NULL) <> NULL Set @Where = @Where + " AND studentid='" + @input1 +"'"
if isnull(@Input2,NULL) <> NULL Set @Where = @Where + " AND teacherid =' " + @Input2 +"'"
DECLARE curs1 CURSOR SCROLL FOR SELECT * FROM school WHERE school ='ABC' + @where =============================================
It gives me all the Records inside the SCHOOL='ABC' ...
Please check my SQL Above and Could somebody tell me , how can I attach the VARIABLE with CURSOR sql statement ?
I'm trying to get just the day part of the date - 2/22/2005 (getdate()) but instead of returning '22', it's returning '2'. Can someone please tell me what I'm doing wrong?
Thanks! Lynnette
Here's the code
declare @thisDay varchar set @thisDay = Convert(varchar, Datepart(day, getdate()))
