My DTS package fails with the following error:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun: Package execution complete. Process Exit Code 9. The step failed.
What does Exit Code 9 means?
hi
below is my procedure but when i execute this i m gettin g following error
Syntax error converting the varchar value 'empbankdetailsBACS' to a column of data type int.
what is problem
-- EXEC sp_GetPaymentMethod 0
CREATE PROCEDURE sp_GetPaymentMethod
@PaymentMethodID int = 0
AS
BEGIN
SET NOCOUNT ON
SELECT
PaymentMethodID,
PM.Descn,
'empbankdetails'+ PM.Descn as 'Descn2',
DateCreated,
LastModified,
0 as 'Value'
INTO
#tmpPaymentMethodGlobalSettings
FROM
t_PayrollPaymentMethod PM, t_GlobalSettings GS
WHERE
PaymentMethodID = 0 OR 0 = 0
ORDER BY
Descn
Declare @SqlString1 varchar(1000)
Declare @SqlString2 varchar(250)
Set @SqlString2 = ''
Declare @Payment integer
Declare @Descn varchar(50)
Declare Payment Cursor for
Select PaymentMethodID
from #tmpPaymentMethodGlobalSettings
Open Payment
FETCH NEXT FROM Payment into @Payment
WHILE @@FETCH_STATUS = 0
BEGIN
Declare @Value int
Select @Descn = Descn2 from #tmpPaymentMethodGlobalSettings where
PaymentMethodID = @Payment
--Set @SqlString1 = '
--Declare @Value int
Select @Value = @Descn from t_GlobalSettings
Update #tmpPaymentMethodGlobalSettings
Set Value = @Value where PaymentMethodID = Convert(varchar(10),
@Payment)
-- exec (@SqlString1)
FETCH NEXT FROM Payment into @Payment
END
CLOSE Payment
DEALLOCATE Payment
Select * from #tmpPaymentMethodGlobalSettings
--Drop Table tmpPaymentMethodGlobalSettings
IF @@error <> 0
RETURN(0)
ELSE
RETURN(1)
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
Hi All,
I installed SQL Express Advanced Services, and when i try to create Data Base or any connection, it shows me this message..http://www.unlimitednetwork.net/data/sql_express_error.JPG
I don't know what to do , and what does it mean that SQL Express requier to function properly!!!!!!!!
Any Help.
Thanks.
after its saying 100% installed its doing the next error:
http://img171.imageshack.us/img171/3786/8847ig0.gif
please help!
btw here's the log file
################################################## #############################
Starting Service ...
Hebrew_CI_AS
-m -Q -T4022 -T3659
An error occurred while attempting to start the service (1084)
SQL Server configuration failed.
################################################## #############################
17:04:32 Process Exit Code: (-1)
17:04:40 Setup failed to configure the server. Refer to the server error logs and C:WINDOWSsqlstp.log for more information.
17:04:40 Action CleanUpInstall:
17:04:40 C:WINDOWSTEMPSqlSetupBinscm.exe -Silent 1 -Action 4 -Service SQLSERVERAGENT
17:04:40 Process Exit Code: (1060) the currect service are not found as installed service.
17:04:40 C:WINDOWSTEMPSqlSetupBinscm.exe -Silent 1 -Action 4 -Service MSSQLSERVER
17:04:40 Process Exit Code: (0)
17:04:40 StatsGenerate returned: 2
17:04:40 StatsGenerate (0x80000000,0x1,0xf000000,0x200,1033,303,0x0,0x1,0 ,0,0
17:04:40 StatsGenerate -1,Administrator)
17:04:40 Installation Failed.
Hey guys, I need your generous heart to share something with what I am experiencing. I found the error from Sql Profiler. Here is the result of my trace:
/*w/o runtime*/
declare @P1 int
set @P1=0
exec CP_glmJournalEntry_Save 1, '110802010200', 'To record PPC-Visa transaction, $4,967.39@Php46.22
select @P1
/*w runtime*/
declare @P1 int
set @P1=NULL
exec CP_glmJournalEntry_Save 1, '210204020202', 'Sample
select @P1
May I know if the runtime came from the stored proc or on the application itself.
Moreover I want to know a lot with stored procedure. I am confusing now because there are times that runtime didn't occur. While some other times runtime occured.
I hope you'll goin to help me,, thanks in advance!
Hi
I am trying to import a excel file into a table but when i run it i am getting this error and i am not sure what this eror is
- Copying to [ICCStatements].[dbo].[Sheet1$] (Error)
Messages
Error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".(SQL Server Import and Export Wizard)
Error 0xc020901c: Data Flow Task: There was an error with input column "AdminShowInKit" (148) on input "Destination Input" (102). The column status returned was: "The value violated the integrity constraints for the column.".(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (102)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (102)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Sheet1$" (89) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.(SQL Server Import and Export Wizard)
Any help will be appreciated..
Regards
KAren
The following error occurred but did not provide any additional info.
[DTS.Pipeline] Error: The PrimeOutput method on component "Pgrs - tr_hist" (14596) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
For this package I am trying to use DataDirect's ODBC driver for a Progress OpenEdge Database version 9.1E to move data to SQL Server 2005 in order to make use of SQL's BI suite. I have consulted the DataDirect and have that the driver is functioning properly. The driver works perfectly from another application. They suggest that the problem is in the the datareader's or the connection manager's implementation of the driver.
Please tell me what is the cause of this or at least how to troubleshoot this problem.
Hello,
I'm having problems when I try to run a package from a job in SQL Server Agent. I have the same package in a server and it works fine,but when I try to install it in a different server I keep getting this error:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 01:19:10 p.m.
Progress: 2007-01-30 13:19:10.40
Source: Delete scripts Execute Process Task
Operation Complete: 0% complete
End Progress
Error: 2007-01-30 13:19:10.57
Code: 0xC0029151
Source: Delete scripts Execute Process Task
Description: In Executing "C:Project_SSISDelete_Items.bat" "" at "", The process exit code was "1" while the expected was "0".
End Error
Progress: 2007-01-30 13:19:10.57
Source: Delete scripts Execute Process Task
Operation Complete: 100% complete
End Progress
Warning: 2007-01-30 13:19:10.57
Code: 0x80019002
Source: Upload data
Description: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 01:19:10 p.m.
Finished: 01:19:10 p.m.
Elapsed: 0.5 seconds
I can run it from Integration services Server, from BI, and I tried modifying the ProtectionLevel property to DontSaveSensitive and ServerStorage. I have other packages that run in jobs, and they work fine...but i don´t know what else to do....By the way, I'm using an administrator user to run the package.
Please help! =(
Hello:
I have a SSIS Project thats been running fine for months up until yesterday.
There's a master package that calls other packages, and when i run it now in Visual Studio, i get a Message Box after each of it's child packages run. The message states:
TITLE: Microsoft Visual Studio------------------------------The designer window cannot be closed while a package is running.Stop the debugger before attempting to close the window.------------------------------BUTTONS:OK------------------------------
This seems to be causing issues, because VS seems to hang on my machine at some point when running master packages, and i think it might due to a message box.
Anyone know how I can get rid of this?
Hi to all!
When I want to execute my package as a job in a SQL Server 2005, I get this Message:
Executed as user: EDAsvcSQLServerPMS. ....00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 09:46:00 Error: 2008-05-16 09:46:01.41 Code: 0xC0048020 Source: Data Flow Task Data Flow Task (DTS.Pipeline) Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048020 Source: Data Flow Task DTS.Pipeline Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048021 Source: Data Flow Task Excel Source [1] Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Excel Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://ww... The package execution fa... The step failed.
The package works fine on the developed server but when I try it out on our integration server it won't go through without these errors. The protection level is set on DontSaveSensitiv and allready I had an error less.
I hope someone can help me, because I can't find anything with google.
Thanx!
Regards,
swisskiwigirl
I have SSIS packages created to import .xls files into sql tables. I now have vb.net code within which I am trying to execute individual packages whenever my code notices the .xls files being deposited within a network folder. When I try to run my code I get the error message:
Assertion Failed:Abort=Quit, Retry=Debug, Ignore=Continue
at STrace.ReadTraceValues()
at STrace..cctor()
at STrace.Trace(String strComponentName, String strLine)
at ManagedHelper.GetNextManagedInfo(DTS_Managed_INFO&nextManagedInfo)
here is my code:
Sub RunPackage(ByVal pkgCMD As String)
'
Dim app As New Application
Dim pkg As New Package
Dim pkgResults As DTSExecResult
'Dim pkgevents As IDTSEvents
'
pkg = app.LoadPackage(pkgCMD, Nothing)
pkgResults = pkg.Execute()
The error occurs during the pkg=app.LoadPackage(pkgCMD, Nothing) statement. Any idea of how I determine why the SSIS package will not load thru my vb app? It runs fine if I load the SSIS package in SSBIDS.
Thanks for any help or guidance.
Hi,
I'm at a loss as to why i am getting the following error:
Retrieving the COM class factory for component CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}failed due to the following error: 80040154
I am calling the package from a C# application which i have installed within a citrix environment. The application works without any trouble on my development machine but as soon as i run the code that executes the SSIS pacakge i get the error. Can anyone enlighten me as to what is causing this?
Many thanks in advance,
Grant
I notice when I copy an SSIS package 'A' to a new package 'B', the new package 'B' will generate a "login failed for user" message in the data flow components. To copy I "save copy of Package 'A' as."
Some config info:
Package ProtectionLevel = EncryptSensitiveWithPassword
Connections are Data Sources
Connection strings with password are stored using PackageConfigurations to an SQLServer table. I've verified Package 'A' is in fact using the config table (e.g. it is not using a password or user stored in the package)
Data connectios are all SQLServer Native OLE DB Client
The account is an SQLServer account (not integrated security)
The original Package 'A' works flawlessly and I get success when I test the connections in Package 'B'.
But executing package 'B' I get: The error message I get is: [Connection manager "MyConnection"] Error: An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'dwuser'.".
Does anyone know why this would occur and/or how to work around it? I saw another thread where a potential workaround is to create a new data flow task and copy all the data flow components to that task. That won't work well for us because the data flow is moderately complex and when you copy and paste it, SSIS completely re-orders the layout.
This is a typical data warehouse ETL setup where there is a master package that executes child packages (e.g. 'A', and 'B' mentioned above) that each perform the ETL for a specific dimension or fact table.
Thanks for any help,
Lee Cascio
Hi,
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client.
But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
Regards,
Roopa.
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
In my SQL Server, I see the below message in the Application Event Viewer
"18265 :
Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."
When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:
" Can't find or load message DLL. Message DLL must be in path or in current directory."
Any thoughts to overcome this problem is appreciated.
Thanks
Santhosh
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?
Hello,
I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.
// Create an empty request message
string Msg = "Hello";
MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));
Message request = new Message("Request", body);
Thanks,
Scott Allison...
I copied and added an existing package as a new package to a project and have been having trouble with settings reverting to those for the original package after I modify and save the changes for the new package. Sometimes happens with the save itself, other times it happens when I close and re-open the package. Most cases are with connections that revert back to the original file reference, but there are also control flow and data flow elements that keep reverting back to either settings from the original package or defaults that result in the re-opened package being in error. Not sure how to get around this issue short of developing the new package from scratch which I'd rather not do since it is fairly complex. Any help anyone can provide is appreciated. Thanks.
View 8 Replies View RelatedHi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies View Relatedi have created one package in production server called User_Import,It will fetch the info from excel file to the Sql  table, I have executed this package in ssis console successfully,But i have to schedule one job using this package on daily basis for that i have created on sql job using this package, Then it is failing i dont know the exact problem,I have full access to my database and full access to the sql agent to exuete any jobs,I have sharing the error message which am getting in the sql agent level, Please find the error msg:
05/11/2015 15:10:20,User_Imports,Error,1,SFRFIDCSCDB003PSQCM03,User_Imports,AD_User Load,,Executed as user: SFRSA-SFR-SQCM-02. Microsoft (R) SQL Server Execute Package Utility  Version 10.50.1600.1 for 64-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.   Started:  15:10:20  Error: 2015-05-11 15:10:20.41   Code: 0xC0011007   Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B} Â
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error  Error: 2015-05-11 15:10:20.41   Code: 0xC0011002   Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}
Description: Failed to open package file "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.".  This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.  End Error  Could not load package "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ ImportsUser_ ImportsUser_ Imports.dtsx" because of error 0xC0011002. Â
Description: Failed to open package file "C:Userssccmadmin DocumentsVisual Studio 2008 Projects
User_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.". Â This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Â Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B} Â Started: Â 15:10:20 Â Finished: 15:10:20 Â Elapsed: Â 0.015 seconds. The package could not be found. Â The step failed.,00:00:00,0,0,,,,0
Hi,
I am new to SSIS. I followed the direction of the tutorial Creating Simple ETL Tutorial package in BooksOnline. I have tried more than five times and have done exactly as suggested in the tutorial but it does not work.
The URL is:
http://msdn2.microsoft.com/en-us/library/ms169917.aspx
I get these warnings and finally fails:
1)[Lookup [30]] Error: Row yielded no match during lookup.
2) [Lookup [30]] Error: The "component "Lookup" (30)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (32)" specifies failure on error. An error occurred on the specified object of the specified component.
3) [DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (30) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
4) [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
Can someone help me with this tutorial error? or Am I doing something wrong.
Thank you,
Hi,
I'd like to know if there's a way to pass parent package parameters to a package executed by SQL Server Job Agent? It appears that sp_start_job doesn't have any variable that could accomodate this.
Hope to hear your ideas.
Hi,
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Is this possible?
Thanks for your help.
$wapnil
I have created a SSIS package with a Foreach Loop including a Data Flow Task, which in turn include a Row Count component which pass the row count value to variable with package scope. The variable is used in an Execute SQL Task following the Data Flow Task.
The package executes successfully when executed on its own, but when executed as a child from a parent package (which only include an Execute Package Task) the variable from the Foreach Loop becomes NULL.
There are a lot of other variables in the package receiving values dynamically without any problem, the row count variable however is the only variable in the package that receives a value as part of a Data Flow (and used in following tasks within the Foreach Loop).
Why does the variable become Null? For your information, I am using a variable with package scope and no variables from the parent package are used or passed from the child package to the parent package.
(For your information, we are running the 64 bit version)
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View Related