DTS Restore Problem In SQL Server 2000
Mar 20, 2007
scott writes "Hi!
I have been asked to write a DTS package that copies a database (call it DBOLD) to another database (call it DBNEW) every night. I do the following:
BACKUP DATABASE DBOLD_App
TO DISK = 'C:ackupDBOLD.bak'
WITH INIT
GO
Then I do the following:
RESTORE DATABASE DBNEW FROM DISK = 'C:ackupDBOLD.bak' WITH MOVE 'DBOLD_App_Data'
TO '... the new one .MDF', REPLACE,
MOVE 'DBOLD_App_Log' TO '... the new one.LDF', REPLACE
The RESTORE often (but not always) fails, particularly if 2005 Reporting Services has queried the data in DBNEW during the day. There should be no-one using the DBNEW overnight when the DTS package runs, so I have permission to "toss then overboard" if they are (note - DBNEW is effectively read-only, for reporting purposes, and is completely refreshed each night, so lost updates etc are not an issue).
How can I force the restore to proceed? I've tried dropping, detaching/attaching but the existing connection(s) apparently prevent this. I dont care about the contents of DBNEW as the data is conmpletely refreshed each night.
If you have any ideas I would be pleased to hear them...
Thanks in advance...Scott"
View 2 Replies
ADVERTISEMENT
Jul 23, 2005
Hello All,I am not a SQL Server expert, but I have been put in a prettyprecarious situtation and I am close to panicking :( I have need torestore a SQL database from backup (through Enterprise Manager). Thedatabase got corrupt and I detached it, then was unable to attach itagain. I created a new database with the same name and file names torestore to. When I go to All Tasks, restore, and restore from apreviously run full backup, it says "SQL Server is currently in theprocess of restoring the backup set," but the progress bar does notbudge. I look in the data folder and see the full sized transactionlogs (35GB I know, need to be shrunk). The .mdf file remains at 1024Kthough. Do I need to just wait longer? Normally when restoring from aSQL Server .BAK file, the progress is shown to me as it goes along. Ido not know what to do here. Any help would be GREATLY appreciated. Iapologize for sounding like a newbie, but with SQL Server, I amdefinitely in that category.Thanks,-D
View 1 Replies
View Related
Aug 15, 2007
Dear all,
I have a backup for SQL server database.
It use differential backup.
I use following steps to restore the database to one of date's backup,because I want to monitor this date's data.
(1) restore a set of the complete backup first.
and select " Leave database nonoperational but about to restore additional transaction logs"
(2) restore one of date's backup, the backup number is 70.
if I restore the backup number by sequence after a set of complete backup is restore, it is ok
But I can not restore them by sequence,because there are many diffenential backup.
The error message is :
Cannot apply the backup on device 'c: empCk2006backup' to database 'CK2006'.
Restore database is terminating abnornally.
I have tried to use following choice :
Force restore over existing database
Leave database operational. NO additional tracsaction logs can be restored.
Leave database nonoperational but able to restore additional transaction logs.
Leave database read-only and able to restore addtional transaciton logs.
But it also failed to restore.
How should I do?
Thanks you
View 3 Replies
View Related
Mar 28, 2008
Hai friends.....
I am doing project in ASP.NET(vb) my backend is sql server 2000...in my PC..
I have another pc....where sql server 2000 is installed.....
i have nearly 50 tables...in sql server 2000. in my PC..
I want to backup these tables from my pc and another pc...
can u tell me the steps...
I will try immediately....
Ambrose......
View 31 Replies
View Related
Nov 29, 2001
Hi,
Any one know how to restore a SQL 2000 backup on to a server which has SQL 7.0??
Thanks,
Naveen
View 1 Replies
View Related
Jan 22, 2002
Is there a way to restore a "single" object in SQL Server 2000? (I only need 1 table and 1 stored procedure restored -- however it appears as though I need to restore the ENTIRE DB to get to these!)
thx.
View 2 Replies
View Related
Nov 24, 2005
Hello!
I have a bug in SQL Server 2000 that I would like to discuss.
The bug is described briefly on http://support.microsoft.com/kb/821334.
"The potential for inconsistency in the backup history tables backupset and backupmediafamily is resolved. This issue may cause the restore process to point to the wrong backup files."
According to my experiences the bug is extremely serious. SQL Server backup and restore operations are not fully reliable. If you have a disaster situation there is a possibility that you can not perform a restore.
Technically a media_family_id is generated in a backup operation and inserted into msdb.dbo.backupmediafamily. What could happen is that a media_family_id, that already exists in backupmediafamily, is generated.
The bug is fixed from version 8.00.0859, but only if you have an special undocumented trace flag (3003) enabled.
Here is the information that I have got from Microsoft about this trace flag.
"Trace flag 3003 changes how SQL generates media_set_id for new backup files. It will guarantee that new media_set_id values in backupset table are unique when you create a new file with your backup. This is the only place in code where TF 3003 is used so it will not impact your SQL Server operations."
I have a SQL Server with 80 databases. I have a maintenance plan with full backup every 24 hours and log backup every 5 minutes.
The error happened on my server a few times every 24 hours. I believe it's a general problem.
Best regards
Ola Hallengren
View 9 Replies
View Related
Sep 29, 2005
Of course I'll try this before I go live, but I figured I'd askhere first. I've read the docs, and the answer is unclear.My current backup strategy is:Take a full database backup occasionally (like, every two weeks).Back up logs every five minutes.This works, but restoring the database all the way through cantake a while, as I've sometimes spun through 800+ log restores.I'd like to change toTake a full database backup occasionally (like, every two weeks).Take a differential backup every day.Back up logs every five minutes.So, I'd have this set of backups after day twoFULLLOGS 1-100DIFFERENTIALLOGS 101-200When I go to restore, do I always have to doFULLDIFFERENTIALLOGS 101-200or can I doFULLLOGS 1-100LOGS 101-200?I guess what I'm really asking is: is there any reason to keepthe "old" logs around (in this case 1-100), if I assume I alwayshave the latest differential?I suppose I *might* need them to do a "point in time" restore,i.e.FULLLOGS 1-53.but assuming I never want to do that, can I discard the logsthat are earlier than my latest differential?
View 1 Replies
View Related
Aug 9, 2007
Sorry for basic question, But i dont know more about SQL Server,
During Last weak , i have bought a new server with Plesk 7.6 that SQL Server 2000 Express is installed on it, I want to know how can i restore databases that comes from other servers, for example restore a SQL Server 2000 Express backup file on this server? is there any special software?
Another question is about changing Collation of a database how can i change collation of databases that i make with SQL Server 2000 Express?
View 1 Replies
View Related
Jun 19, 2007
Hi,
I've got a question regarding attaching/restoring of DBs and wonder if anyone could help me out.
Does SQL Server 2000 provide a functionality to attach/restore DB automatically? ie, some kind of polling service to attach/restore DB that were detached previously?
Thanks
Danny.
View 6 Replies
View Related
Oct 30, 2007
I have a database backup from Server Express 2005 that I want to restore to SQL Server 2000. I keep getting an error message saying it was created a newer version and wont work. Is there a workaround to this.
Thanks.
View 7 Replies
View Related
Dec 27, 2007
Hi All
I have Computer is setuped SQL Server 2000 and SQL server 2005 when I restore SQL Server 2005 it's OK but when it's not OK when I restore in SQL Server 2000. The Error as follows:
Please help me to solve this problem. Thanks
View 1 Replies
View Related
Jun 22, 2007
Hi Friends,I have installed SQL server 2005 Express Edition and SQL Server managementI have a SQL server 2000 db backup file. I try create a new database in my SQL server 2005 express Edition and try restore that backup file from device, it only searching for file with *.bak and *.tm extension! I tried generate backup file with .bak extension and tried restore into SQl server 2005 express edition but still it is not allowing to do so! I also tried copy my database's data file and log file and paste it under SQL server 2005 express edition Data folder and still not able to read the tables.Is that any ways to do restoring for this SQL server 2000 backup file into SQL server 2005 express edition! Anybody can help me on this please...:eek:
View 2 Replies
View Related
Feb 11, 2008
Hi Dear,
May Any one guide me?
I have a backup file of database which is in SQL Server 2000. it has no Extension.I want to restore this backupfile or this database in my SQL Server 2005.
I have tried to Attach Database or attach this backup file in Sql Server2005 but it also fails .
First I have created New database name as is on the backupfile and then I have also tried to rename this file with .bak extension and then try to restore again it fails.
Plese Guide me urgently........
:eek: :eek: :eek: :eek: :eek:
View 9 Replies
View Related
Oct 17, 2006
Hi All
This is a very urgent requirement of my client having 200 stores and one Head office. the HO has just installed SQL-Server 2005, The HO sends small backups of the data related to stock transfer which needs to be restored at stores. It was working find when both the HO and stores were SQL-Server 2000. but the process has come to a dead halt as the HO has SQL-Server 2005. It is not possible to convert the stores immediately. please help me out.
Thanks
Raoshan
View 3 Replies
View Related
Oct 22, 2007
I am maintaining a .net 1.0 asp.net web application that accesses a SQL server 2000 database. I need to backup the database and then restore it on a laptop. Currently it resides on a server. The problem is that on the server they are using sql server 2005. If I backup using 2005 and then try and restore this database using SQL server 2000 or 2005 on the laptop, I get an error message. "Too many backup devices specified for backup or restore; only 64 are allowed. RESTORE DATABASE is terminating abnormally.
What can I do to restore the database? Must it be backed up with SQL server 2000 and then restored with SQL Server 2005?
Please help!
View 1 Replies
View Related
Jan 29, 2008
I was running Small Business Server 2003 with MS SQL Server 2000. I put backups of all my SQL Server 2000 databases on hard disk d: and the operating system and applications on c:/. I then reformatted c:/ (but left d:/ intact) and installed Windows XP Home. Then I installed MS SQL Server 2005 Developer's Edition.
I would like to now restore the backups of the SQL Server 2000 databases (still intact on drive d:/) to SQL Server 2005, but I get a variety of error messages.
I suspect that I am going about this the wrong way. I have done several hours of research in the documentation without success. I cannot attach the SQL Server 2000 database to SQL Server 2005 because it is a backup, not a database. I cannot migrate the databases as part of the installation of SQL Server 2005 because (a) they are back-ups, and (b) I don't have SQL Server 2000 installed when I install SQL Server 2005.
Is there a solution?
TIA
Mark Schreiner
View 6 Replies
View Related
Jul 15, 2007
I have a file backup database SQL Server 2000
I want to restore it to SQL Server 2005.
But it failed.
I try :
Database ( right-click) - Restore Database - From Device - Specify Backup Add
Locate Backup File. I must choose File of Type is All File so that i can find file backup from SQL 2000, if i choose File of Type is *.bak,*.trn so i cannot find that file.
And then i choose OK all. But it failed. The error is below :
Restore failed for Server 'DHBK-734D0C3663'. (Microsoft.SqlServer.Smo)
------------------------------
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: Directory lookup for the file "C:Program FilesMicrosoft SQL ServerMSSQLdataqlsach_Data.MDF" failed with the operating system error 3(The system cannot find the path specified.). (Microsoft.SqlServer.Smo)
Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
===================================
System.Data.SqlClient.SqlError: Directory lookup for the file "C:Program FilesMicrosoft SQL ServerMSSQLdataqlsach_Data.MDF" failed with the operating system error 3(The system cannot find the path specified.). (Microsoft.SqlServer.Smo)
Program Location:
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
View 11 Replies
View Related
Aug 1, 2007
We are attempting to restore one of our databases from a backup that went to a local drive on the server.
We see the backupset in the list but receive an error that it is not available when we try to use it. When we try to restore from device and select the files the drive letter is not available. When we attempt to enter the path to the file it can't locate it. We don't have space on our SAN to copy the backup there and we can't add the local drive to the cluster resources.
Is there a way to get this backup done?
View 1 Replies
View Related
Feb 14, 2007
for disastor recovery purposes i have a user request to restore a sql server 6.5 base backup(.dat file) into sql server 7.0 or 2000. can this be done in a restore on a different server?? all servers are windows 2000
View 3 Replies
View Related
Dec 31, 2014
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
View 6 Replies
View Related
Feb 16, 2001
I am trying to restore a database that was backed up in SQL 2000 to our server which is running SQL 7.0 and I'm getting an error message. Is there a compatibility issue and if it is how can I resolve it?
Thanks
View 2 Replies
View Related
Jul 1, 2004
I have encountered a slight problem restoring a SQL Server 7 database to Server 2000.
In some of the tables, all records are duplicated.
When I try to delete them naturally I get an error "Too many rows were affected by update". What are my options here?
View 2 Replies
View Related
Oct 11, 2000
Hi everyone,
Can you let me know, how to restore a database backup of sql 2000 into sql 7.0. If it is explain me the process of it.
Thanks
Jagannath
View 1 Replies
View Related
Mar 8, 2002
Hi all,
Can someone tell me if I could get db dumps from sql server 6.5 and restored them into SQL Server 2000 Enterprise Edition Server.
If yes, could you please tell me the trick to achive this.
Regards
Uday
View 2 Replies
View Related
Jul 1, 2002
Junior Member
Posts: 2
Joined: Jun 2002
Monday July 01, 2002 11:00 AM (NEW!)
I am installing SQL 2000 on a brand new server. Once installed I will need to restore my db's from our current SQL 7.0 server. I know I can restore the user db's. I've read that you can not restore the MSDB and master db's. So What steps would I take to make sure I get all the info in these db's? I found an article on how to transfer logins and passwords, so that should get me my logins. I'm guessing I'll have to script up my packages /jobs somehow. How do I go about doing this? And what else am I missing that I will need to do in order for my master/msdb to contain everything that it contained on the SQl 7.0 server?
Also should I make the server name the same as the server name on the current box or do I have to make it another name? I'm talking about under the SQL server group.
Also I would like to keep the 7.0 version up for a bit and just make sure the 2000 side is working the way I want to . Our db are datawarehouse db that we use with another software package. So I will need to make changes there before I can totally turn it over to use the SQL 2000 db's One I've done this then I'll be ready for the switch. I will then restore the SQL 7.0 db again on the sql 2000 server and should be ready to go at that time.
What else am I missing. Any tips/precautions?
View 1 Replies
View Related
Feb 10, 2004
Hi...
I am trying to restore a week-old backup from a file of one database to a different (new) database for development. This is something that I do on a regular basis and have never had issues before. Now it is failing using both QE and Enterprise Mangler and am getting this error message:
Server: Msg 3135, Level 16, State 2, Line 1
The backup set in file 'D:BACKUPS......bak' was created by BACKUP DATABASE...FILE=<name> and cannot be used for this restore operation.
Server: Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I have tried this....
RESTORE DATABASE temp_new_db
FROM DISK = 'D:BACKUPS..mybackupfile.bak'
WITH REPLACE
And this....
RESTORE FILELISTONLY
FROM DISK = 'D:BACKUPS..mybackupfile.bak'
RESTORE DATABASE temp_bio_remote
FROM DISK = 'D:BACKUPS..mybackupfile.bak'
WITH MOVE 'Original_DB' TO 'D: emp_new_db.mdf',
MOVE 'Original_DB_log' TO 'D: emp_new_db..ldf'
What am I doing wrong? Any ideas?
Thanks in advance...
Justin
View 13 Replies
View Related
May 28, 2007
Dear experts, I've a backup in sql server 2005. how can i restore that in 2000? and is it possible to do the same from 2000 to 2005?
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 2 Replies
View Related
Nov 22, 2006
Hi,I have an old 2000 bak file for a db that I would now like restoredonto sql server 2005. I keep erroring out though, this is what I'mdoing:Went to Restore Database in sql 2005, selected the db I want itrestored to, and File (say c: empxyz.bak)Checked the restore checkbox, went to options checked Overwrite theexisting database.Do I need to do anything else, maybe in the Restore the database filesas section? As those path are listed as:C:Program FilesMicrosoft SQL ServerMSSQLdataxyz.mdfC:Program FilesMicrosoft SQL ServerMSSQLdataxyz_log.ldfIf I just run it without updating those mdf and ldf paths, I keepgetting an error:Exclusive Access could not be obtained because the database is in use.Thanks.
View 2 Replies
View Related
Jan 2, 2006
Hello,
I'm tring to restor a DB from sql 2005 (which is located on my local computer) into sql 2000 (which is located on the server) and I am getting this type of message:
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Too many backup devices specified for backup or restore; only 64 are allowed.
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3205)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.0818&EvtSrc=MSSQLServer&EvtID=3205&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Why? and how to restore SQL 2005 DB to SQL 2000?
View 49 Replies
View Related
Oct 1, 2007
Is it possible to uninstall SQL 2005 and reinstall SQL 2000 if I need to? I would obviously have a backup copy of the database(s) from the SQL 2000 version. If so, is this a major ordeal to perform?
View 5 Replies
View Related
Aug 4, 2007
My customer has SQL Server 2005. I have SQL Server 2000 on my laptop (on XP Pro). I believe I have an empty database the same as theirs, but I need to restore their data. They sent me a normal SQL Backup, but my laptop threw a fit and cannot work with it.
They are now trying to export the database to Microsoft Access and send me that, but I won't get that until next week now. However is there a better and easier solution for those of us with insufficient experience of this, please?
Many thanks,
Caspar
View 3 Replies
View Related
Jun 10, 2008
Friends -
Is it possible to restore user databases in SQL Server 2005 with user database backup copy of SQL Server 2000.
Please advise on this.
Cheers:)
VSH
View 11 Replies
View Related
