Hi ,
I have code in SQL Server 2000 (DTS). what is same code to inactive execution status in SSIS
If returnValue <> "" Then
DTSPackage.Steps("DTSStep_DTSDataPumpTask_2").ExecutionStatus = DTSStepExecStat_Inactive
Else
DTSPackage.Steps("DTSStep_DTSDataPumpTask_3").ExecutionStatus = DTSStepExecStat_Inactive
End If
Thanks,
Raja
why the toolbox is always inactive? I am not talking about the SSIS Toolbox but just the toolbox.
View 3 Replies View RelatedWe have 350 tables in our database, I want to drop/delete those table(s) that are inactive. Is there a way to check which tables are not active, so I could drop/delete that table(s).
View 1 Replies View RelatedHere are two tables. How do i create an SP for INACTIVE delete and how do i use the UNIQUE constraint to avoid duplication of the NAME columns(logingroup_name and login_name) in these tables?
--Creating Table ref_LoginGroup:-
create table ref_LoginGroup
(
logingroupid tinyint identity(1,1) constraint pklogingroupid primary key clustered,
logingroup_name varchar(25) constraint chkname check(logingroup_name NOT LIKE '% %'),
changed_login_id int,
is_active bit,
lastupdr smalldatetime,
)
--Creating Unique nonclustered Index for ref_LoginGroup:-
create unique nonclustered index idxlgn on ref_LoginGroup(logingroup_name)
--Creating Table ref_Login:-
create table ref_Login
(
login_id int identity(1,1) constraint pkloginid primary key clustered,
login_name varchar(50) constraint chklogname check(login_name NOT LIKE '% %'),
firstname varchar(30),
lastname varchar(30),
logingroupid tinyint constraint fklogingroupid foreign key references ref_LoginGroup(logingroupid),
changed_login_id int,
is_active bit,
lastupdr smalldatetime
)
--Creating Unique nonclustered Index for ref_Login:-
create unique nonclustered index idxl on ref_Login(login_name)
My db is working in simple recovery mode, when I run "dbcc sqlperf(logspace)", I find the log file is very large and the log usage percentage is 98%. In most case, when I run "backup log db_name with no_log", the log usage percentage will be reduced. but in fact it is no change. I make sure there are no active logs in it. Who can tell me the reason ? thx.
View 1 Replies View RelatedI have a snapshot & a transcation publication on Server A, and a pull subscription for each on Server B.
The distribution agent on ServerA has the error:
"The subscription(s) have been marked inactive and must be reinitialized. NoSync subscriptions will need to be dropped and recreated."
Any idea what caused this ..... Everything was fine for a week or so.
Does anyone know of any good books or publications on Replication ? I've got some DBA books that cover the basics, but I'd like something that helps explain the oddball situations.
SQL 2K
Hello,
I am having a problem with the SQL Server 2005 database of our ERP system. We have a scheduled batch that gets stuck because of a lock on a table. The lock remains overnight and halts all other processes (it seems most of them are waiting for this lock to get solved)
I know which table the lock is on and if I kill the lock manually, the batch continues and finishes without a problem
my question is: can I change this behaviour somewhere?
The piece of code that causes this lock is protected, but in a debug log I was able to see that it happens during following actions:
first a select is performed to fetch a certain record in the file that gets locked
next an update is performed with following syntax:
update ... set.... where current of 'pointername'
this update is waiting for a lock to be released before the batch continues.
My guess is that somehow the pointer that is set with the select statements, locks the row and that's why the update cannot be performed.
The strange part is that this lock does NOT occur everytime that this table needs to be updated. And that's why I am stuck and asking help of the real database people :)
If someone can give me a hint on a setup,property, or just a pointer to where I can find more info on the 'why'-part of the lock, I would be very grateful
database is SQL Server 2005 SP1 on win2k3
I am trying to find any stored procedures or tables that have not been used in the last 2 months or so. Can anyone recommend me a good way to do this?
SQL 2005 Enterprise Edition SP 2
Thanks in advance.
Kay
hi all,
i have a snapshot replication running on multiple publisher singel subscriber running on sql2k. i'm frequently encountering these error.
the subscription has been marked inactive and must be reinitialized.
no synch
i've set the subcription to never expire in the publications property tab.
thanks
Hi
I am working at a site that has no dedicated DBA, and our Sql Server 2000 environment has recently been playing up. There are several databases on the Production server that should be inactive (for applications no longer used).
What is the best way for me to see if there has been any recent activity on these databases (short of taking them offline and waiting for screams). Please keep in mind that I am a Sql Server novice.
Cheers
Does anyone know if there is a 3rd party tool available to disconnect user logins after being inactive for a period of time? Is this something that can be custom written?
Thanks for any assistance, Jim
hi,i've just restored my db and when i try to login with a user (even ifthe user is "sa"), an error occours.The error is "User sa is currently inactive"How can i solve this problem?Thanks,Massimo
View 1 Replies View RelatedI' d like to list all inactive clients.Inactive client is a client who hasn't had invoice for 2 months.I use INNER JOIN to join invoice view (vwDok4FSFZGrid) and clientsaddresses table (adr_Nazwa). I skip empty values (adr_Ewid.adr_Nazwa !=''). I select only invoices with date after the interesting date.So now I can list all active clients but i can't negate this resultset to get all inactive clients:SELECT dok_PlatnikId, adr_Nazwa,adr_NazwaPelna,adr_Adres,adr_Miejscowosc,adr_NIP, dok_DataWystFROM vwDok4FSFZGridINNER JOIN adr__EwidON vwDok4FSFZGrid.dok_PlatnikId=adr__Ewid.adr_IdObiek tuWHEREadr__Ewid.adr_Nazwa !=''AND(dok_DataWyst >= convert(datetime,'10/03/2007'))GROUP BY dok_PlatnikId, adr_Nazwa,adr_NazwaPelna,adr_Adres,adr_Miejscowosc,adr_NIP, dok_DataWystIs there any way to negate this set?1. Sorry for my English2. I would appreciate any help:)
View 1 Replies View RelatedIs anyone else having an issue with SSRS menus not being able to be clicked on?
When I roll the mouse over the menu item, it highlights, but when I click, nothing happens.
It affects the top menu items, and any right click menu.
This is an intermittent problem, but it does happen daily. I have to shut down VS to fix.
BobP
A Contractor has a list of Contracting Companies that he has worked for in his history.
For each row in the "Contracting Company" table, there is an Active Date and an Inactive Date. Each Contracting Company cannot have overlapping dates.
The last row in the table for that Contractor may have a null Inactive Date. That just means that he doesn't know when his contract will end.
In Report Builder, I can access the "Last Active Date", because there is a pre-built formula for "Last Active Date". However, whenever I access the prebuilt formula "Last Inactive Date" - I get the inactive date for the second-last row, because the last row has a null value for the Inactive Date! I want to get the Inactive Date for the last row - not the second last row!
How to do this easily? Thanks!
Hi AllgI have problem in using the SQLDataSource. When in VS 2005 I drag and drop the SQLDataSource onto my page and then add a GridView control.I bind the GridView control to the SQLDataSource control. But the problem is it does not generate the INSERT, UPDATE, and DELETE statements. The dialog box is inactive. The screenshots may help. please help me in this regard. I also tried it for Accesscontrol but the same problem. Sorry for my poor English!. thanks in advancehttp://img205.imagevenue.com/img.php?image=27550_1_122_203lo.JPGhttp://img139.a.com/img.php?image=28285_2_122_937lo.JPG
View 1 Replies View RelatedI have problem in using the SQLDataSource. When in VS 2005 I drag and drop the SQLDataSource onto my page and then add a GridView control.I bind the GridView control to the SQLDataSource control. But the problem is it does not generate the INSERT, UPDATE, and DELETE statements. The dialog box is inactive. The screenshots may help. please help me in this regard. I also tried it for Accesscontrol but the same problem. Sorry for my poor English!. thanks in advance
the screenshot links:
http://img139.imagevenue.com/img.php?image=28285_2_122_937lo.JPGhttp://img205.imagevenue.com/img.php?image=27550_1_122_203lo.JPG
How to query in SQL to retrieve all the disabled Windows Users which are available as records(only) in the SQL Server ?
View 9 Replies View RelatedHi,
I€™m hoping someone might be able to help me.
I have a Development Machine running Windows XP Professional SP2, with SQL Server 2005 including Reporting Services. I am developing an ASP.NET application using VS 2005, and am including Server Side Reports from SQL Server. Everything is working well, except when viewing the Reports.
The Reports when viewed from Reporting Services€™ Report Manager or from within the ASP.NET application only display the first page of the report, displaying the total number of pages as 0. As well, most of the functions on the report toolbar appear to be disabled. This occurs for any report viewed, even sample reports such as the Adventure Works Samples.
The problem only occurs when viewed from within Internet Explorer on the Development Machine. To overcome the problem, I have upgraded SQLServer to SP2, and removed and reinstalled Internet Explorer, but it made no difference. It appears to be related to the rsClientPrint ActiveX addon which should have been installed when the print icon was first selected. It appears not to have installed properly, but up to that point everything worked OK. Selecting the Print icon (or any other icon) since nothing happens. I€™m guessing here, but I suspect that the rsClientPrint addon needs to be reinstalled, but I don€™t know how to go about it. It is not listed within IE addon (where it is on other machines connecting to the Development Machine), nor is it listed within the €œC:WindowsDownloaded Program Files€?. But it is not being downloaded when the Print Icon is selected. I have checked all the Security settings for the environment to ensure that ActiveX programs are downloaded, and everything appears to be in order.
Would anyone be familiar with this problem or have any suggestions on how to go about resolving it? Any help would be appreciated as it is causing significant problems. Strange though, the reports appear fine when viewed from within the Server Manager.
I need to create a trigger to meet following conditions.
When parent record is deleted from UI record becomes inactive in table. i need to create a trigger when this happens.
When parent record is deleted child records needs to be inactivated in table.
I am getting this error when I run the case statement below. I think I have to convert at some point, but not sure where or how.Â
Case when m.dispo = 2 then 'Inactive' else m.value end 'Score'
Greetings,
We periodically get the following message in our three server peer-to-peer transactional replication environment:
"One or more subscriptions have been marked inactive. Drop and re-create all subscriptions for this node that are failing with this error."
What causes a subscription to be marked inactive? What properties or settings can be adjusted to minimize or eliminate this occurrence?
Everthing seems to be running OK and then we get the message. It afflicts the higest change volume publication on our slowest overseas server.
Thanks,
BCB
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
I want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
Run the SSIS import/export wizard.
(xls -> sql table)
Select the tasks created.
Copy.
Here is the error that occurs.
p.s. Does anyone have any needles I can borrow? I think sticking them in my eyes would be nicer than working with SSIS.
===================================
An error occurred while objects were being copied. SSIS Designer could not serialize the SSIS runtime objects. (Microsoft Visual Studio)
===================================
Could not copy object 'Preparation SQL Task' to the clipboard.
(Microsoft.DataTransformationServices.Design)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=SerializeComponentsFailed&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
at Microsoft.DataTransformationServices.Design.ControlFlowClipboardCommandHelper.InternalMenuCopy(MenuCommand sender, CommandHandlingArgs args)
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.PersistImpl.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.SqlServer.Dts.Runtime.DtsContainer.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
Hi. I need to import excel file in database. i first need to do an unpivot task. the column names are dates and SSIS seems to be unable to pick up the column name as it is replaced by F2 F3 F4etc Can you advise of a solution. thanks ken
View 1 Replies View RelatedHi,
I'm finding that the standard components often just don't quite meet my
needs, but would only need some fairly minor changes to save me and my team a lot of
work (and produce more elegant solutions). So I was just wondering whether the source code was available for the standard components that come with SSIS, or if there is anyway to extend their functionality?
Or do you just have to start form scratch?
Thanks,
Lawrie
I need to build an asp.net/C# application to read values from an Excel spreadsheet. Once the values are read from the spreadsheet, the C# code will do some elementary statistics on the values read. Then the values read and their computations will be written to a sql server database.
My manager suggested that SSIS might be a good candidate technology for doing this type of work. Does that sound correct? My only hesitation with using SSIS is that I want to keep the application as simple as possible, so that the code can be more portable. Maybe might argument is not a good one, but maybe someone can help me out here.
Ralph
Hi,
I have two variables
1. strStatement datatype (string)
2. objTable object (user tables)
the string strStatment returns a dataset
and is assigned to objTable.
I want write the data from objTable to a sql table
and it seems not to work.
Here is what I did.
I used data flow task to either select from a a string or objectTable.
but it give me an error.
Dear Friends,
I store several configurations in the main database of my SSIS packages. I need to get the servername from a xml or txt file in order to get those configurations stored in my database.
How you think is the better way to do that?
Using a FlatFileSource to read the file and a script to save the value into a SSIS variable?
Using the package configuration I cant do that... maybe I dont know, but I can save the SSIS variale in the configuration file, but what I need is to do the inverse, read the configuration file and save the value in the SSIS variable.
How the best way you suggest?!
Regards!!
Thanks.
Hello,
View 13 Replies View RelatedWe have SQL 2008 in development but only SQL 2005 in production. I have an SSIS package that was created in 2008 but need to deploy it to a SQL 2005 server. The '05 server will not import the package because of its version. Is there a way to convert back or 'save as' SSIS '05?
View 6 Replies View Related