DTSX Package Data Transfer Error
Jul 10, 2007
I will try to explain things the best I can.
When the data is transferred from source to destination (replace not append), the data in one field in one table is incorrect. Both source and destination tables have the same number of rows (8493). The ProductID field data range at the source is from 58958 to 73008. When the table is copied the ProductID field data runs from 1 to 8493.
What would cause this skewing of data?
This happens on brand new dtsx packages and this only happens in one field out of 5 different tables.
I am baffled. Any help is appreciated.
Thanks.
Andrew
View 16 Replies
ADVERTISEMENT
Jun 13, 2007
I have a dtsx package that is calling another dtsx package, however, if the called upon dtsx package fails with errors or what not, then the calling package does not continue as well. Is there any way to override this such that if the called upon package fails, the downstream actions in that package can stop, but the calling packages downstream actions to continue?
View 3 Replies
View Related
Apr 9, 2008
I had encountered an error on SSIS its not allowing me to create any new packages. Below is the error message. Please do help be out.
This problem had occurred on my server machine
Error 1 Error loading Package.dtsx: Error loading value "<DTSroperty xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:Name="CreationDate"
DTSataType="7">08.04.2008 4:39:55 PM</DTSroperty>" from node "DTSroperty".
c:documents and settingssrmohammedmy documentsvisual studio 2005projectsdictaphone_synchronizationdictaphone_synchronizationPackage.dtsx
View 3 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Aug 21, 2014
What do I need to stop this error?
Started: 5:05:48 PM
Error: 2014-08-21 17:05:50.64
Code: 0xC000F427
Source: File System Task
Description: To run a SSIS package outside of SQL Server Data Tools you must install File System Task of Integration Services or higher.
End Error
View 1 Replies
View Related
May 12, 2015
We are struggling to add an extra column to a Dtsx package. The package essentially compiles data into a table and then exports the data to a series of Spreadsheets. So far I have ended up doing the following: -
-Creating a new Folder for the Spreadsheet Templates, copying the existing spreadsheets into the new Folder and then added the new Column.
-Creating new Connection Managers in the Package to connect to these new templates.
-Adding the column to the various data flow tasks so that the new column is converted and then exported (data type is varchar(30), conversion type is Unicode text stream [DTNTEXT]).
Everything validates when we compile the dtx package. However when we run the package we are getting the following error: -
Started:Â 5:39:49 PM
Error: 2015-05-12 17:45:39.05
  Code: 0xC0202009
  Source: Data Flow Task Voluntary Excel [2379]
  Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
End Error
[Code] ....
View 5 Replies
View Related
Dec 11, 2007
Hi,
I have a Users table in Oracle database and same table (Users) in SQL Server 2000 database. I want to create a DTS Package through which I can copy the data from Oracle database to SQL Server 2000 database. This package should run automatically at mid-night daily so that if there are some entries done in Oracle database then it get copied in SQL Server 2000 database. Also is there any way to copy only those entries from Oracle database which are not present in SQL Server 2000 database. Please help me in this regard as I am new to DTS.
Thanks
Rohit
View 1 Replies
View Related
Apr 8, 2008
Hi All,
I have created fact tables and dimension tables in datawarehouse database, and i created a olap cube from those tables.
I want to run SSIS Package which populates these fact and dimension tables from datasources.
Thanks in advance,
Archana
View 5 Replies
View Related
Apr 2, 2008
Hi All,
can anybody help me in creating the SSIS package to transfer the data from SQL table in database engine to OLAP cube in Analysis services
Thanks in Advance.
Archana
View 1 Replies
View Related
Dec 8, 2006
Hi!
I have a SSIS-package with Excel Connection Manager that fails on our x64-platform with error:
Error: 2006-12-08 06:46:23.77
Code: 0xC0202009
Source: dpd2_philips Connection manager "Excel Connection Manager"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2006-12-08 06:46:23.77
Code: 0xC020801C
Source: Copy Data from Blad1$ to dpd2 dbo philips Task Excel Source [107]
Description: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
End Error
It's works fine on my computer (x86) and if I start the package manually on the x64-server. But I noticed that it runs under 32bit (DTExecUI.exe *32 in taskmanager) when it's started manually.
Any idea? The server use dtexec.exe to start the packages. Maybe it runs under 64bit then?
View 4 Replies
View Related
May 23, 2006
Hi Champs
I want to implement a rutine that watches for specific files in a specified folder.
I've found the WMI sample "File Watcher Task" for SSIS and it looks fine.
My question is now: how shall I run this package; shall I start it at let it run forever?
And also how do I monitor that the package is running?
Many thanks
Rogvi
View 2 Replies
View Related
Oct 19, 2007
I understand that I can use dtutil to provide a password to encrypt the package. However, when I run the encrypted package, I need to provide the same password in order to run it. Is there a way that I can encrypt the package but allow anybody to run it without providing the password?
That is, I want the package to be encrypted so that nobody can load and modify the code in Visual Studio, but I want people to be able to execute it. Is there a way to do this? Similar to generating a exe file?
View 7 Replies
View Related
Mar 28, 2007
Dear all,
SSIS package created from the wizard couldn't be run from the visual studio editor? The run button is disabled. Is it not possible to run from inside editor as well?
Many thanks,
milan
View 3 Replies
View Related
Jan 17, 2008
am trying to execute a dtsx package using xp_cmdshell
when testing, this works fine
DECLARE @returncode int
EXEC @returncode = master..xp_cmdshell 'dtexec /f "C:WorkWarehouseDev.ETLLoadGroup_Daily.dtsx"'
PRINT @returncode
then change it to look at the live one
DECLARE @returncode int
EXEC @returncode = master..xp_cmdshell 'dtexec /f "C:WorkWarehouse.ETLLoadGroup_Daily.dtsx"'
PRINT @returncode
doesnt work - it tries to execute the WarehouseDev version
any ideas ??
n.b. didnt know if this should be in this forum or a t-sql forum - apologies if its in wrong place !!
View 4 Replies
View Related
Apr 4, 2007
hi there,
when i start SQL Server business intelligence developer and create new Integration Service project, i will see following error:
Error loading 'Package.dtsx' : Object reference not set to an instance of an object.. C:SairiMy DocumentsVisual Studio 2005ProjectsIntegration Services Project12Integration Services Project12Package.dtsx
this error occures just on my PC and i reinstalled VS2005 and SQL2005 again and unfotunately the problem existes.
please someone helps me (just don't tell me to format my PC!!!)
tnx
View 10 Replies
View Related
Sep 13, 2006
Hi,
I used to write DTS Scripts in SQL Server 2000 and schedule them as jobs with out problem.
This was normally done within SQL Server its self.
Now that I've moved to using SQL Server 2005 I've been learning how to use SSIS.
I've successfully developed a package and managed to create a .dtsx file. Now I have 2 large books on the subject of SSIS but none seem to go into any detail on what to do next.
So here€™s my newbie question (I apologise if I sound dumb!):
I don't want to run my package manually as the books keep telling me how to do.
I need to have my package added into SQL Server 2005 somehow and then schedule it as a reoccurring job.
Can anyone point me in the right direction?
Thanks
Matt.
View 3 Replies
View Related
Dec 13, 2007
I am having trouble with a dtsx package to truncate a table, then insert the contents of a .csv file.
The package is being executed off the local filesystem, reading a csv on the same file system, and inserting into a remote SQL 2k5 server. If I run the package alone in BI it will run perfectly, if I implement the package into a console app in visual studio, it will trunc the table, but will not insert any of the data in the csv file. When running from DtExec I recieve the following error on the CSV portion after the table is truncated:
Code: 0xC00470FE
Soure: Data Flow Task DTS.Pipeline
Description: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for for componenet "Soure - My_File_CSV" (1).
I have tried all the work arounds I can find without any luck. All help will be appreciated.
View 4 Replies
View Related
Jul 14, 2006
Is there a way to strip out the annotations from a dtsx package. I'm looking at quite a few and would like to automaticly pull those out and store them somewhere in either a table or a text file.
Is this possible or am I going to have to hand copy them out?
Thanks for the help
Saitham8
View 11 Replies
View Related
Mar 9, 2006
Help!
I'm trying to create a simple .dtsx package that imports data to SQL server 2005 from an informix 7.3 db using an ADO.net ODBC connection. I am first creating the groundwork for the dtsx package in SQL server using the wizard, and then editing the file later in visual studio.
My data source SQL in the dataflow task is simple and it works great until I hit a locked record on the Informix database.
select <coulmns>
from <table>
Where <condition>
The work around syntax for the locked row on the informix DB should be:
set isolation to dirty read
go
select <coulmns>
from <table>
where <condition>
This syntax will return the data correctly using a non-microsoft SQL editor, however it will will not parse corectly within visual studio. Interestingly enough, in visual studio I can parse the islolation and the select indenpendantly, just not in the same statement.
Has anyone come across this before? Any ideas on what I can do to resolve my problem?
Thanks in advance!
View 7 Replies
View Related
Aug 13, 2007
When I try to run a DTSX package from SQL server agent, I get this error message:
Started: 3:59:42 PM Error: 2007-08-13 15:59:42.39 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSroperty" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-08-13 16:00:00.98 Code: 0xC001602A Source: CFASerialNoExport Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: The password was not allowed . End Error Error: 2007-08-13 16:00:00.98 Code: 0xC002918F Source: FTP Task FTP Task Description: Unable to connect to FTP server using "FTP Connection Manager". End Error DTExec: The packag... The package execution fa... The step failed.
All my other packages run fine. This one contains an FTP task and will not run, although it will run if I execute it through the visual studio.
View 3 Replies
View Related
Jan 31, 2007
Hi all!
I have open the one package dtsx and return this error:
Error loading 'Test.dtsx' : Error HRESULT E_FAIL has been returned from a call to a COM component.. c:projects... etc..
which the problem?
THX
View 2 Replies
View Related
May 16, 2006
I have now created a few simple SSIS packages. In BIDS I right-clicked on a solution and selected "Build". I went to the "bin" directory hoping to find a standalone ".exe.dll" file but found only a ".dtsx' file.
Can BIDS can actually build a standalone exedll or is the .dtsx file all that's available? (If so, I guess that another program is expected to invoke the .dtsx file.)
TIA,
barker
View 3 Replies
View Related
Jan 23, 2007
Hi
I am trying to build a package that is comprised of 100+ dtsx packages but cannot seem to get it to work. I have created a new connection where the connectionmanagertype = file and the file path is equal to the folder in which my dtsx files are located. I (location = fileSystem). No matter what I do I get an access denied error that shows the folder location but no package. I manually typed the name of the package in the PackageName property and have pasted in the PackageID in the appropriate property as well but I don't see anything in the PackageNameReadOnly. I have read the MSDN information but I don't see a step by step way to build a package of packages against which I can compare. Can anyone set me straight?
Thanks.
Robin
View 17 Replies
View Related
Jul 3, 2007
I have a SSIS package that I want users to be able to execute by clicking a button on an a web page. The package does not require any parameters to be passed to it. Previously I've executed DTS packages without any problems but after a fair bit of investigation and trawling the net I've not found a way to do this successfully with SSIS. Some code I've tried - Dim app As New Application()
'
' Load package from file system
'
Dim package As Package = app.LoadPackage("c:ssisPackage.dtsx", Nothing)
'package.ImportConfigurationFile("c:ExamplePackage.dtsConfig")
'Dim vars As Variables = package.Variables
'vars("MyVariable").Value = "value from c#"
Dim result As DTSExecResult = package.Execute()
lblResult.Text = "Package Execution results: {0} " & result.ToString()
All I get is a message 'Failure'.
Does anyone have an example of how to do this?
View 10 Replies
View Related
Aug 31, 2007
I get the following error:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "'I:MyFolderMyRptsMyApplicationMyDatabase.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.".
The above path "I:...." is mapped on the server that SQL Server is running on.
This package runs with NO problems in MS Visual Studio.
View 1 Replies
View Related
Feb 26, 2015
I have a job that runs a dtsx package (containing an infinite loop). What I want to do is set up a schedule to start the job at 8am and stop it at 5pm. The scheduling GUI doesn't give this kind of option (caveat: that I can see).
View 3 Replies
View Related
Sep 17, 2007
Where do I find about running an SSIS package (.dtsx) from a ASP.Net web service, particularly issues to do with permissions
cheers
Rob
View 1 Replies
View Related
Aug 6, 2007
What is the best way to move a SSIS solution to a new server so that I can edit the solution when I have problems?
Thanks,
View 5 Replies
View Related
Jan 10, 2008
So I've seen articles outlining how to execute a package in VB and how to pass variables along to the package, which is great.
But I'm wanting write a VB.NET app that will read the xml in a .dtsx package, looking for the available variables (and datatypes) that need to be passed to the package to configure it properly. Anyone done this? Is it best to use parent package variables? Or another type of configuration?
When looking at the xml of a .dtsx file, I can see a variables section that could be parsed... is there anything letting me know what is required versus optional? How do I know the datatype that I need to pass? Any help would be appreciated...
View 22 Replies
View Related
Dec 11, 2007
Does the validation time of DTSX package depend on the amount of data?
I have a data transfer task which contains a oledb source data from a SQL Server 2005 view. Then the data go through 3 Lookup transfromations before going into another view, also on SQL Server 2005 but a different database.
The purpose of this package is to load fact data, so it has to deal with few million of rows. Before setting DelayValidation to true, it takes few minutes just to open the package in BI Studio. Now with DelayValidation set to false, I can open the package without any problem. But it takes more than 5 minutes during Validation, Prepare for Execution and Pre-execution Phase. During the time the memory usage and cpu time on SQL Server goes up significantly. The CPU doesn't hit 100% though. My client machine doesn't have any significant activity.
I have similar packages ( Oledb view -> 3 or 4 lookup Transformations -> Oledb Table) but dealing with dimension data. With DelayValidaion set to False, those packages can be opened in BI Studio within few seconds. They also take only few seconds during those 3 phases before starting actual execution phase.
So I have an impression that the validation time depends on the amount of data in the database. Shouldn't it just depends on the metadata?
View 5 Replies
View Related
Mar 22, 2008
Im trying to figure out if there is a way to embed an ssis package into a c# winform?
I know that I can pass variables to a package and write the entire package out programatically, but im curious if there is a way to add the dtsx as an assembly or something. OR is there any tool that would take the ssis package and spit out its equivalent in code?
thanks
View 6 Replies
View Related
May 9, 2007
Hi All,
When I start executing my package a SQLDumper.exe pops up and Stops the package execution.
In addition,SQLDumper.exe creates a SQLDUMPER_ERRORLOG.log file at my Desktop with the following content
05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 255205/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0100C5D005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x0000000005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x0000000005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0032.mdmp05/09/07 14:09:55, ACTION, DtsDebugHost.exe, Watson Invoke: No
Thanks in advance
View 4 Replies
View Related
Aug 9, 2005
How do we sync up dtsx files with Visual Source Safe? best practices?
View 10 Replies
View Related
