Daily Scheduled Job Has Its Schedule Disabled Despite Successful Completion
Jun 16, 2004
I have a job which is scheduled to run once daily. The job is enabled and the schedule is also enabled. After the job runs (successfully), the schedule has its 'Enabled' flag reset (i.e. the 'Enabled' checkbox in the schedule properties has become unchecked) and so is not rescheduled.
I have other jobs configured in a similar way, but they are run and then rescheduled in the normal way without any problems.
Hi All,I have a DTS package that runs calling a few stored procedures and anactiveX module. The package does some data cleanup and load. It takesan hour to complete. I have emails sent at the beginning and end ofthe package execution along with error notifications if any of thestep fails.The issue is that, the DTS runs successfully. I ran the package fromthe server and it completes. If I schedule it, it has been running forover a few months without any issues. One fine day hell broke looseand it started to give an attitude!!When the job is invoked automatically on the scheduled time, it runsthe package. Does what its supposed to do including sending out thefinal email. but is not finishing the job. The job says its stillexecuting but the final step has completed. I have tried logging thepackage, and it says completed the last step.. But the JOB Log hasn'twritten anything to the log file.. (Job Log is where I am logging thestep where I am calling the DTS).Has anyone have any idea what this issue is? I am at a dead end andhave no clue why this is happening. I am thinking of changing thewhole process but before that I want to try posting this.Any ideas, suggestions will be much appreciated. Please feel free tolet me know if there is any additional information you need in orderto troubleshoot this issue.Thanks in advance..Aravin.
I am trying to restore a SQL Server 2005 database from a backup file and experiencing a hanging issue after its "finished"
I am doing this in SQL Server Management Studio, generating the following SQL for Restore:
RESTORE DATABASE [AdventureWorks2] FROM DISK = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLBackupAdventureWorks.bak' WITH FILE = 1, NORECOVERY, NOUNLOAD, REPLACE, STATS = 10 GO
When I run this on the machine i originated the backup with (creating AdvWorks2) it runs fine in no time.
When I run this command on another SQL Sever 2005 instance on another host. It appears to run fine, and I see progress going up to 100% and it says "Restore Completed Successfully"
BUT, for some reason, the database in object explorer is stuck with a "(Restoring...)" label attached to its tree item and I am unable to perform any activities on that database instance. It claims, it's in the middle of a restore operation! again this is after it had reached 100% on progress and declared successfull completion.
Any ideas what could be causing this?
(Note: Both instances are SQL Server 2005 - Service Pack 2)
The problem is as follows. SQL Express 2008 R2, backup is made by the means of bat file and sp. Need to have a table that would hold columns like 'date_of_backup', 'duration', 'message' (the one that appears on 'messages' tab in the result area after backup completion/failure). This is an example of real message that I want to catch:
Server: Msg 911, Level 16, State 11, Line 1 Database 'not_existing_db' does not exist. Make sure that the name is entered correctly. Server: Msg 3013, Level 16, State 1, Line 1 BACKUP DATABASE is terminating abnormally.
Hi, We are using Shared Schedule to trigger reports at a particular time. We are invoking the SQL Job associated with the shared schedule. How to identify when the shared schedule gets completed i.e. all the associated reports with the shared schedule are generated. We need to trigger other external processes once all the reports are generated. Kindly help me in this. Subash
Just curious to hear if anyone else has experiences this or knows a reason why it maybe should be this way...
I have some jobs that are disabled accourding to the Job Activity Monitor view in Mgmt Studio. However, if I open the schedules details, this view says Enabled. Can a schedule be enabled for a job, even if the job in itself is disabled maybe? But, I can't see any enable/disable flag in the sysjobschedules table, only in sysjobs.
I'm using SSMS 2012. I have multiple queries that are run daily(I also have a few that are run every Monday) that I want to schedule to run at midnight and export to a new xls file on the network drive to be used the next morning. Is there something that I can add to each query to accomplish this or would I have to set something else up to call the queries?
Currently, I have a report that takes two parameters: StartDate and EndDate.
I would like to schedule the report to run on a Daily, Weekly, Monthly or Yearly basis, but this doesn't work too well with StartDate and EndDate because the parameter is static. What is the most elegant way to implement this change?
I got the following error message when the scheduled DTS run for copiying the records from one server to another server.Actually it has copied successfully,but still returned this error?!There is a similar job on a different server doing the same thing returns a success message properly.?!! Thanks for any help.
''...ding... DTSRun: Executing... DTSRun OnStart: Create Table request124 Step DTSRun OnError: Create Table request124 Step, Error = -2147217900 (80040E14) Error string: There is already an object named 'request124' in the database. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 2714 (A9A) Error string: There is already an object named 'request124' in the database. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: Create Table request124 Step DTSRun OnStart: Copy Data from Results to request124 Step DTSRun OnProgress: Copy Data from Results to request124 Step; 10 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 10 DTSRun OnFinish: Copy Data from Results to request124 Step DTSRun: Package execution complete. Process Exit Code 1. The step failed.''
I have a Job that runs a DTS package. This package in turns call several other packages. All individual packages run fines. When the main package is run manually it also runs fine. The jobs that calls the main package should be runnning for at least a couple of Hours maybe more and updtae several tables. It actually run nightly for only 20 minutes and doesn't update any tables. Yet it is in "successful"? Any thougts?
I used Query Analyser to De-tach a SQL 7 database and that worked fine. The database became 'invisible' in Enterprise Manager and the entry was removed from the sysdatabases in Master. The mdf and ldf file remain in the file system. However, when I ran the sp to Attach the database QA said successful but it does not show in Enterprise Manager or in sysdatabases in Master. I'm going to run through the procedure again and if problems I'll check the logs but has anyone else had difficulty with this. Also with attaching the db to a SQL2000 install I believe the logins on the SQL7 install are not brought over. In my case, the client is using trusted logins with their database application so their is probably not a lot to manually recreate on the SQL 2000 install but doees anyone have nay sample code/script that can give me an idea of what is required in the area of getting logins out of the Master of SQL7 and into SQL2000.
I have a standard Login ASP.NET 2.0 control on a login Page, a LoginName and LoginStatus controls on the member's page. once the user login successfully I am redirecting the user to Member.aspx page. The following is my machine configuration
Windows XP Pro Service Pack2 IIS 5.1 SQL Server 2000 visual Studio 2005 DISABLE ANONMYOUS ACCESS IN IIS ENABLE WINDOWS AUTHENTICATION
I am Using form authentication, and I am getting following error "Your login attempt was not successful. Please try again".
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> </head> <body> <form id="form1" runat="server"> <div> You are back ........ <asp:LoginName ID="LoginName1" runat="server" /> <asp:LoginStatus ID="LoginStatus1" runat="server" LogoutAction="Redirect" LogoutPageUrl="~/Login.aspx" />
</div> </form> </body> </html>
Member.aspx.cs
using System; using System.Data; using System.Configuration; using System.Collections; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls;
public partial class Member : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Response.Write("<br/>Page.User.Identity.Name: " + Page.User.Identity.Name); Response.Write("<br/>Page.User.Identity.IsAuthenticated: " + Page.User.Identity.IsAuthenticated); Response.Write("<br/>Page.User.Identity.AuthenticationType: " + Page.User.Identity.AuthenticationType);
I have had an underwhelming amount of success hunting down the sourceof this error and am hoping that someone here may have some insight.Error logged in the event log:Source: MSSQLSERVERCategory: (2)EVENT ID: 17887Description: IO Completion Listener (0x754) Worker 0x00FEC0E8 appearsto be non-yielding on Node 1. Approx CPU Used: kernel 0 ms, user 0 ms,Interval: 15187.Immediately followed by 100% CPU utilization. The server remains ping-able and I can telnet to the SQL port, but it is otherwise effectivelyunresponsive (queries timeout, RDP times out, etc.). This is alsologged in the SQL error log:2008-03-19 15:52:37.80 Server Using 'dbghelp.dll' version '4.0.5'2008-03-19 15:52:46.80 Server **Dump thread - spid = 0, PSS =0x00000000, EC = 0x000000002008-03-19 15:52:46.80 Server ***Stack Dump being sent to D:Microsoft SQL ServerMSSQL.3MSSQLLOGSQLDump0004.txt2008-03-19 15:52:46.80 Server *************************************************** *****************************2008-03-19 15:52:46.80 Server *2008-03-19 15:52:46.80 Server * BEGIN STACK DUMP:2008-03-19 15:52:46.80 Server * 03/19/08 15:52:46 spid 02008-03-19 15:52:46.80 Server *2008-03-19 15:52:46.80 Server * Non-yielding IOCP Listener2008-03-19 15:52:46.80 Server *2008-03-19 15:52:46.80 Server *************************************************** *****************************2008-03-19 15:52:46.80 Server *-------------------------------------------------------------------------------2008-03-19 15:52:46.80 Server * Short Stack Dump2008-03-19 15:58:13.09 Server Stack Signature for the dump is0x000000062008-03-19 16:03:40.94 Server IO Completion Listener (0x730)Worker 0x00A060E8 appears to be non-yielding on Node 0. Approx CPUUsed: kernel 0 ms, user 0 ms, Interval: 15187.2008-03-19 16:06:10.47 Server Timeout waiting for external dumpprocess 6016.2008-03-19 16:06:10.47 Server IO Completion Listener (0x754)Worker 0x00FEC0E8 appears to be non-yielding on Node 1. Approx CPUUsed: kernel 0 ms, user 0 ms, Interval: 15187.2008-03-19 16:17:34.51 Server IO Completion Listener (0x754)Worker 0x00FEC0E8 appears to be non-yielding on Node 1. Approx CPUUsed: kernel 0 ms, user 0 ms, Interval: 15187.The server is Windows 2003 SP2 (32bit), dual dual-core AMD opteronprocessors, 8GB RAM, RAID 10. /3GB and /PAE are enabled in boot.ini."Lock pages in memory" has been granted to the account SQL runs as.SQL Server is 2005 Standard Edition SP1 (32bit). "Use AWE to allocatememory" is enabled. Min and max memory are set to 5GB.If there is any other info you think may be helpful introubleshooting, please let me know. Any insight you've had into thisor similar problem would be appreciated. Thanks in advance.
I have a package that has 4 Script Tasks that are placed sequentially.
I have Task1--> Task2-->Task3-->Task4
The arrows between them are OnCompletion Arrows as opposed to the Standard OnSuccess arrows.Even if Task2 failed, it would still execute 3 and 4
the catch is that i want it such that when i run the first time and task 2 fails, then all the tasks except task2 should run which is fine, but when i rerun it. I want it such that it realises that task 2 had failed earlier, so it runs just task2.... if both 2 and 4 had failed then it should just run 2 and 4
i tired to implement it with check points, but the problemn is that if it fails at task2 it stops at task2 and does not continue to execute tasks 3 &4... when u rerun it starts at 2 but like i said i would like 3 & 4 to have completed the previous run...
Ok, here is the deal. In T-SQL, an error is handled depending on its severity. For example, a severity of 15 or less (or is it 10 or less? doesn't matter) will only raise a warning that can be caught through the message event. 16 or higher (or whatever) will cause an exception to be thrown on the .NET side, and 20 or higher causes the connection to be closed.So far so good.Now here's my issue: I have a stored procedure that does 2 queries (inside the same SP). Sometimes, the first query will succeed, while the second one will cause an error of severity 16. Again, in .NET that will throw an exception, making me unable to fetch the first resultset (which I require for logging purpose). If the error was, let say, severity 9, I could simply subscribe to the message event to get my error, yet still be able to get the first result set. But unfortunately life isn't perfect, and the error is indeed a severity 16.Anyone know of a way to be able to get the first result set, even if the second query (within the same SP) completly fails?
I'm running a pretty standard insert command on a button (myCommand.ExecuteNonQuery();) I have a few other methods that run, but I only want them to proceed if the above was inserted successfully, how would i check that?
After a successful transaction (after committing), I found that i sent wrong records of one the column (wrongly updated). How do I get back my initial stage? I mean, how do I get back all the previous results? Is there a way to retrieve my previous data which were before committing a transaction?
I've installed 2005 / RS on my testing server several times, no problem.
My production server throws an error when Reporting Services is installed. There are a few threads on this error:Microsoft SQL Server 2005 Reporting Services -- Error 29528. The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation. I've Googled several similar complaints which discuss any of: Ensure IIS default web site is set to "All Unassigned" Ip[/*]Delete the RS Web services pool and retry[/*]Install RS separately[/*] The first two do nothing for the problem. While installing RS separately doesn't generate an error, it also doesn't create the RS databases.
Can the databases be created separately after installation?
I run XP Professional on a home machine. I recently installed VB 2003 with MSDE. When I go to the server explorer window, right click to add a connection, the Data Link properties dialog box pops up as it should. I select the name of home server, indicate integrated security, and select a sample database such as model or master from the list. The test connection is successful and clicking OK causes the connection to appear in the Server Explorer window. Yet when I go to open the connection, there is no data. The folders for Tables, Stored Procedures and so forth appear but they are empty. I have another 2000 database that a friend sent me. If I try to indicate in the Data Link propetries dialog box that I would like to attach this database, I get the same symptom. Test connection successful, yet when I create and open this connection, the folders are empty. I am a newbie to ADO .NET and I am not sure where to begin. Can someone help?
I keep receiving the error message below when I try to connect to SQL Management Studio
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)"
I have tried all of the suggestions in Google, in the forum, etc with not success.
I have enabled the
Named Pipe protocol/ Shared Memory protocol
SQL Server browser is enables
I even tried changing the SQL Server 2005 Shared Surface Configuration with no success.
I did not have this problem until the day light saving time change. I know this may having nothing to do with it but I need some help pronto.
In the error log I have the following error
Could not connect because the maximum number of '2' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: <local machine>]
Error: 17809, Severity: 20, State: 1.
Not sure what to do or if the problems are related.
I have three sequence containers setup to run in parallel. I have a final step that parses the log file and displays results, and I want to this to occur when all three containers have completed, success or failure. I therefore have a constraint from each container that feeds into my final step, and all three constraint types are set to "completion".
When I run the package and one of the tasks within a container fails (and fails its parent, but not the package) the final step is not executed.
If I take off all the constraints except one, the final step is executed as expected.
I am using checkpointing if that has any impact. Disabling it makes no difference.
I'm not entirely sure this is the place for it but I need to implement an automatic text completion function.
I'd like to know if there is something, such as a built-in function, that could help me. The best idea I have is to create some sort of node tree and work with that but there has to be a better way.
I need to do it in C# or in MS SQL. Any kind of help is much appreciated!
Is there a way (during the Control Flow) to force a package to complete successfully when a specific condition is met?
Here is what I'm trying to do:
A package will be scheduled to execute once a day The first thing it does is downloads Excel files from an FTP site. If there are no files to download, I don't want the package to fail, I simply want the package to stop (preventing the subsequent Data Flow tasks from executing), returning a successful completion.
The reason, I need a successful completion is because I plan to have MOM monitor the Windows event logs, notifying us of any errors that this package logs.
hello, I'm new to store procedure in slq 2000. I want to create a sproc in my sql 2000 sevrer,I have a table named "Supplier", now I want to return my identiy field value when I use insert into sql command (insert into "Supplier") successful. So how to create this store procedure ? much thanks
I wish to have a batch file exit with a return code of 3 if it fails. In the batch file I have the single command: Exit 3 On SQL Server the Process Exit Code of a successful command is set to 0.
Yet, when I run the job SQL Server says that it is successful.
