Data Access :: Missing Microsoft Excel Odbc Driver In System Dsn
Oct 28, 2015i am on a 2008r2 machine and need to add a microsoft excel odbc driver but its missing.
View 2 Replies
ADVERTISEMENT
[Microsoft][ODBC Microsoft Access Driver] System Resource Exceeded
May 22, 2007odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect
we got the error with access 2000 database and PHP as prog. language .
we created dsn for the connection.
reboot solves the problem. but we need another solution better than this.
How Can I Use Create Or Alter Statements With ODBC And Microsoft Access ODBC Driver (*mdb)?
May 13, 2007
Hi,
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Thanks for help!
Regards,
Stefan D.
[Microsoft][ODBC Driver Manager] Data Source Name Not Found And No Default Driver Specified
Oct 19, 2006trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
Thanks!
Dan <><
Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]
Dec 10, 2003Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
[Microsoft][ODBC SQL Server Driver]Syntax Error Or Access Violation'
Apr 25, 2003Where i try to create stored procedure in sql server 2000 using query analyzer i'm getting an error
'[Microsoft][ODBC SQL Server Driver]Syntax error or access violation'
and the same stored procedure if i try after some time without any changes it gets created..
how is wrong?
[Microsoft][ODBC SQL Server Driver]Syntax Error Or Access Violation
Apr 17, 2008
Hi guys! I am using SQL 2005 and I wonder why I am encountering the error "[Microsoft][ODBC SQL Server Driver]Syntax error or access violation" everytime I am trying to create stored procedure with temp table and table variable.
See my code below with temp table.
Any thoughts will be appreciated!
CREATE PROCEDURE DBO.SAMPLESP
(@DETAILS AS VARCHAR(8000),
@ID AS VARCHAR(15))
AS
BEGIN TRANSACTION
CREATE TABLE DBO.#TEMPTABLE
{
ASSET VARCHAR(50)
}
DECLARE @INSTINSERT AS NVARCHAR(4000)
SET @INSTINSERT= 'INSERT INTO #TEMPTABLE(ASSET)'
SET @INSTINSERT= @INSTINSERT+ @DETAILS
EXEC sp_ExecuteSQL @INSTINSERT
INSERT INTO InstDetail
(TrackNum, ASSETID)
SELECT @ID, A.ASSE
FROM #TEMPTABLE A
DROP TABLE #TEMPTABLE
IF @@ERROR != 0
BEGIN
ROLLBACK TRANSACTION
RAISERROR('There was an error in here', 11, 1)
RETURN
END
ELSE
COMMIT TRANSACTION
Error = [Microsoft][ODBC SQL Server Driver]String Data, Right Truncation
Feb 18, 2004Hi !
I'm trying to load data in sql server table with Bulk Copy Program (BCP).
I have the following errors.
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]Unexpected EOF encountered in BCP data-file
In my File to load i have this :
Hello1¤Hello2¤17/02/2004
TOTO1¤TOTO2¤17/02/2004
TITI1¤TITI2¤17/02/2004
My definition table is :
create table tab1
(
TABLE varchar(20) null ,
PK varchar(50) null ,
DATE datetime null
)
go
I launch bcp with this command :
bcp.exe "BASETEST.dbo.tab1" in "c: ab1.out" -c -CRAW -t¤ -m100 -Smyserver -U -P -o"c: ab1.log"
The file "table1.out" is making with a C program.
Do you have an idea ?
Thanks.
Resolution Of Following Error: IM010: [Microsoft][ODBC Driver Manager] Data Source Name Too Long
Feb 26, 2008Hi SQL Server Team,
In order to add a data source by using ODBC Administrator, programmatically i am using SQLConfigDataSource. Thus calling SQLConfigDataSource with the fOption set to either ODBC_ADD_DSN for creating a new DSN.
Following is the stattement specified in the source code. where type_of_driver = "Microsoft Access Driver (*.mdb)"; and parameters contains the data source source credentials information such as DSN, UID, PSW, FIL, Description, DataDirectory,DEFAULTDIR and DBQ all separated by " ".
rc = SQLConfigDataSource(NULL, ODBC_ADD_DSN, type_of_driver, parameters);
after execution of below mentioned command an error is encountered i.e -1 is returned if the DataDirectory path exceeds certain nested directories link. for eg. the file path specified below.
C:My DocumentsClients CurrentAHW Netcare BenefitsDeliverables1-5 Results Chain - system LevelAlberta NetcareBenefits Logic System Level V01.rcm
Creating a datasource with the file name i.e Benefits Logic System Level V01 every time.
rc = :: SQLConnect(hDbc, (unsigned char *)szSource, SQL_NTS, (unsigned char *)szUserName, SQL_NTS, (unsigned char *)szPassword, SQL_NTS);
Also following error message was encountered during execution of SQLConnect command.
/*szErrorMsg = 0x0012e834 "[Microsoft][ODBC Microsoft Access Driver]General error Not enough information to connect to this DSN with SQLConnect. Use SQLDriverConnect."*/
Thus followed the instruction smentioned in the error message an dtried using SQL DriverConnect() in the following manner.
rc = :: SQLDriverConnect(hDbc, NULL,(SQLCHAR *)"DSN=RCM",SQL_NTS,outstr, sizeof(outstr),
&outstrlen,SQL_DRIVER_NOPROMPT);
Still an error is encountered but this time it returns a RETCODE of 100 whrease earlier it had returned -1.
Inform the procedure to be followed using SQLConnect when DataDirectory path is too long.
An early reply will be appreciated.
Cheers & Regards,
Saresh
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server Does Not Exist Or Access Deni
Sep 29, 2005Hi..
when I use MSSQL in local ASP files , it is fine.
But If I try to connect another ASP file that is hosted by another machine, I get the following error!
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
in local I connect to my sql like below
Server=AAA*DDDDDDD
when I connect to mssql from another machine I try that
Server=IP/AAA*DDDDDDD
Server=IP
1[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server Does Not Exist Or Access Denied.
Jul 26, 2007Hi,
when I was sending 50 simultaneous connections to the web services, I got these 2 errors:
- "1[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. "
- "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)"
Everything worked fine if I ran 10 simultaneous connections. I am using Microsoft ACT to load test the web service. The database is SQL Server 2000. Any idea about why this is happening?
Appreciate your help! Thanks!
Jason Zhu
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server Does Not Exist Or Access Denied
Jun 6, 2007Hi,
When I am trying to access SQL Server 2000 database from another machine i got this error
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
but I could access the database on same server and in that server i could access other databases in different server.
Driver Not Capable (-26) When Exporting The Data From Odbc Access Using Sql Server Managare 2000
May 9, 2008
Hi,
I am getting the error message as "DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)" at the time of retrieving the catalog infromation by SqlTables methode. it is shown "?" as catalogname but this not supported by odbc access driver. can you please help out how can i resolve using C++ code in SqlTables methode.
Error message:
dtswiz 1390-e20 EXIT SQLTablesW with return code -1 (SQL_ERROR)
HSTMT 003C3108
WCHAR * 0x00D27EB8 [ -3] "? 0"
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00164804 [ -3] "TABLE 0"
SWORD -3
DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)
Best Regards,
Murthy
Do We Have Microsoft ODBC Driver For DB2?
Feb 15, 2004Hi,
Do we have Microsoft ODBC Driver for DB2?. If we do then how we can get?.
Thanks,
Ravi
Sql Server Driver Missing From Odbc Administrator
May 3, 2007Sql server driver missing from odbc administrator;
Software; SQL Server 2005 SP2 installed on W23K SP1.
Under Drivers tab in odbc administrator the sql server that uses sqlsrv32.dll, is missing. All the other drivers that comes with W2K3 Service pack1 is there. In addition i can see the SQL Native Client(SQLNCLI.DLL).
I have an application that has to use SQL Server Driver. How can i get it back?
Hope someone can help me?
[Microsoft][ODBC SQL Server Driver]Unknown
May 25, 2001Hi, I am getting this message, anyone knows what could be the reason for this. My connection to the sql server is out too.
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
Thanks
Ali
[Microsoft][ODBC SQL Server Driver] Error
May 2, 2008Hi everyone,
I am getting the below error when I try to access the table in 2005 database through 3rd party application from the application server.
“[Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt�
This database was restored from sqlserver 2000, so the ODBC connection in the application server first was pointing to 2000 database and now its dropped and recreated to point to the 2005 database.
I dont get this error message when I do the same action from my pc.
I google'd on this error message, and I am not sure if the driver has to be upgraded or if there is anything else that I am missing here.
Thanks much.
[Microsoft] [ODBC SQL Driver] Timeout Expired
Feb 5, 2008
Hi ,
Well i have one question regarding the Timeout . I have an SQL SERVER 2005 database and have an VB6.0 application. I have a stored procedure which inserts more than 90,000 rows from one table to another . Some times i get an exception as [Microsoft] [ODBC SQL Driver] Timeout Expired in the Visual Basic application and some times it works fine. The exception i receive within 30 seconds , but when i try the same stored procedure in query analyser , it works fine. also i have increased the timeout in visual basic , but still i get the same error.
Can anyone suggest.....
SQL Server Express, ODBC, Microsoft Access Sees Data Read-Only
Feb 13, 2006Hi there,
I have successfully installed SQL Server Express.
I have copied NorthWind to SQL Server.
I have created an ODBC to the SQL NorthWind.
But my problem is, I open the data but I cannot edit or insert records
to the Customer table.
I have gone into SQL Management Studio and modified Permissions
on NorthWind and the Customer table with Alter, Insert, Update.
But no luck.
Has anyone experienced this?
Email me at justintoronto@hotmail.com if you have a solution.
I will try to check back here also.
Thanks,
Justin
[Microsoft][ODBC SQL Server Driver] Timeout Expired.
Jun 29, 2002Hello,
When I connecting thru T-SQL, the following error was thrown.
Unable to connect to server 'SERVERNAME'
ODBC: Msg 0,Level 16, State 1
[Microsoft][ODBC SQL Server Driver] Timeout expired.
How to fix this?
regrads,
vnk.
[Microsoft][ODBC SQL Server Driver]Timeout Expired
Aug 19, 1999I am running a query which pulls back about 200,000 records.
When I run this in ISQL (SQL Server 6.5), it runs in almost 2 minutes.
When I put it in a store procedure and run it off my ASP application, I
get this error
[Microsoft][ODBC SQL Server Driver]Timeout Expired
We've tried many things including:
1) Increased connection and command time outs in Global ASA
2) Have the ODBC driver log long Quires to a file
3) Changed Query Time out in Enterprise Manager(360 seconds) Go to
tools --> Preferences/configure -->Connection Tab
4) Changed Maximum allowed open database from 20 to 200
5) Changed resource timeout to 360 seconds from 5 seconds
6) Changed remote query timeout to 0, allowing infinite wait.
What else can we try???
Thanks for taking the time to read this
Joyce
Microsoft][ODBC SQL Server Driver]Timeout Expired
Feb 1, 1999Hi all,
I inherited some really twisted asp pages from another developer that crank for a long time. They used to work, albeit slowly. Now when I try to run one I get the error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e31'
[Microsoft][ODBC SQL Server Driver]Timeout expired
Short queries run fine.
IIS4 & SQL Server are on the same box. I didn't the ASP pages or the IIS or SQL server config. I did install VStudio 6.0 a while back.
Anybody got any clues?
[Microsoft][ODBC SQL Server Driver]Timeout Expired
May 29, 2002Thank you to all who reply to this perplexing question.
Mike
Database VMFGSRVRVMFG is SQL 2000 Std.
Database NT002P_GL is SQL 7.0.
All SQL versions are at the current SP levels.
I receive the timeout message when I am in EM,
database,VMFG(database), Views, Open View, Return All
Rows. I can successfully run the code in QA. I believe I
am running up against a time parameter in SQL Server. I
have reviewed all time parameters that I can find.
However, I still receive the error. What parameters should
I be looking at? I am attempting to create a view with the
following code:
--------------
CREATE view uv_olap_adj_co_profit as
select customer.id as customer_number,
customer.name as customer_name,
customer_order.salesrep_id as salesperson,
isnull(customer.country, 'USA') as country,
'7' as business_unit,
customer_order.order_type as order_type,
uv_olap_co_profit.customer_order,
uv_olap_co_profit.work_order,
uv_olap_co_profit.close_date,
uv_olap_co_profit.period_year,
uv_olap_co_profit.gl_period,
isnull((uv_olap_co_profit.billing + ut_man_adj.billing)
*ut_fin_adj.billing,
uv_olap_co_profit.billing*ut_fin_adj.billing) as billing,
isnull((uv_olap_co_profit.material_cost +
ut_man_adj.material)*ut_fin_adj.material,
uv_olap_co_profit.material_cost*ut_fin_adj.materia l) as
material,
isnull((uv_olap_co_profit.labor_cost + ut_man_adj.labor)
*ut_fin_adj.labor,
uv_olap_co_profit.labor_cost*ut_fin_adj.labor) as labor,
isnull((uv_olap_co_profit.burden_cost + ut_man_adj.burden)
*ut_fin_adj.burden,
uv_olap_co_profit.burden_cost*ut_fin_adj.burden) as
burden,
uv_olap_co_profit.service_cost as service
from uv_olap_co_profit,
ut_man_adj,
ut_fin_adj,
customer_order,
customer
where uv_olap_co_profit.customer_order *=
ut_man_adj.cust_order_id and
uv_olap_co_profit.work_order *= ut_man_adj.work_order and
uv_olap_co_profit.period_year = ut_fin_adj.year and
uv_olap_co_profit.customer_order = customer_order.id and
customer_order.customer_id = customer.id and
(customer_order.salesrep_id = 'LABELAIREP' or
customer_order.salesrep_id = 'OMOHUNDR' or
customer_order.salesrep_id = 'EGGERSR')
union all
select customer.id as customer_number,
customer.name as customer_name,
customer_order.salesrep_id as salesperson,
isnull(customer.country, 'USA') as country,
customer.user_2 as business_unit,
customer_order.order_type as order_type,
uv_olap_co_profit.customer_order,
uv_olap_co_profit.work_order,
uv_olap_co_profit.close_date,
uv_olap_co_profit.period_year,
uv_olap_co_profit.gl_period,
isnull((uv_olap_co_profit.billing + ut_man_adj.billing)
*ut_fin_adj.billing,
uv_olap_co_profit.billing*ut_fin_adj.billing) as billing,
isnull((uv_olap_co_profit.material_cost +
ut_man_adj.material)*ut_fin_adj.material,
uv_olap_co_profit.material_cost*ut_fin_adj.materia l) as
material,
isnull((uv_olap_co_profit.labor_cost + ut_man_adj.labor)
*ut_fin_adj.labor,
uv_olap_co_profit.labor_cost*ut_fin_adj.labor) as labor,
isnull((uv_olap_co_profit.burden_cost + ut_man_adj.burden)
*ut_fin_adj.burden,
uv_olap_co_profit.burden_cost*ut_fin_adj.burden) as
burden,
uv_olap_co_profit.service_cost as service
from uv_olap_co_profit,
ut_man_adj,
ut_fin_adj,
customer_order,
where uv_olap_co_profit.customer_order *=
ut_man_adj.cust_order_id and
uv_olap_co_profit.work_order *= ut_man_adj.work_order and
uv_olap_co_profit.period_year = ut_fin_adj.year and
uv_olap_co_profit.customer_order = customer_order.id and
customer_order.customer_id
[microsoft][odbc Sql Server Driver] Timeout Expired
Apr 9, 2001Hi!,
I am running sqlserver 2000 enterprise edition on windows 2000.
When I try to run a select statement. I am encountering
[microsoft][odbc sql server driver] timeout expired
How do fix this problem?
Thanks,
Ranjan
[Microsoft] [ODBC SQL Server Driver] Timeout Expired
Oct 30, 2007I've tried every websearch possible to try and get a solution for this problem but can't.
Development Software:
SQL Server 2000
Enterprise Manager 8.0
Query Analyzer 8.00.194
Error:
When I run a mildly complex view in Enterprise Manager I get the error:[Microsoft][ODBC SQL Server Driver]Timeout Expired
after about 30 seconds.
When I copy and paste and run the exact same code in Query Analyzer the Query runs for longer than 30 seconds and runs until completion. Now my question is since this apparently seems to be an Enterpise Manager problem and not on the server end, where do I go in Enterprise Manager to change that setting? I've looked everywhere in Enterpise manager and can't find a "command timeout" setting.
Thanks!
[Microsoft][ODBC SQL Server Driver] Timeout Expired
May 18, 2004Hello,
I installed MS SQL Server 2000 Evaluation Edition on
Windows XP Pro. I have database on the same PC. When I
am running a query(view) from Query Analyser I
get "[Microsoft][ODBC SQL Server Driver] Timeout Expired"
error message . When I am running the same view on
smaller amount of data it works.
:confused:
Could you please help me with that?
Thanks
DJ
[Microsoft][ODBC SQL Server Driver]Timeout Expired
Mar 6, 2008Hi,
I have tried updating the DSN configure option i.e. 30000 milliseconds.
But I am still facing the problem of Timeout Expired.
I am using sql server 2005 for daily importing data from Excel Dump Files into sql server table.
Everyday the database gets updated.
The Error mentioned in Subject normally gets once a month, due to daily updation of database whether each table structure gets changed like index, trigger, etc.
Kindly let me know how to resolve this error.
Regards,
Srinivas Alwala
[Microsoft][ODBC SQL Server Driver]Communication Link Failure
Aug 29, 2002All,
I need a help from you all. I am getting this error if the users are running the application which is connecting from MSAccess97 to SQL Server 2000.
Error: [Microsoft][ODBC SQL Server Driver]Communication link failure
I would appreciate if you send me the resolution for this problem.
Thanks,
Reddy
Microsoft ODBC Sql Server Driver Communication Link Failure
Nov 16, 2005I get the message Microsoft [ODBC Sql server driver]communication link failure error message in my VB 6 application with MSDE engine. This error does not happen often.
My connection string is as below.
"Provider=MSDASQL;Driver={SQL Server};Server=" & mSvrName & ";DATABASE=cnsClient;uid=uid;pwd=pwd"
Please help.
Sql Query Analyser [Microsoft][ODBC SQL Driver]Timeout Expired
May 10, 2006Hi,
Ive got a collection of view which piece together data from varying sources and assemble it ready for a stored procedure to squirt the data into a table.
This has worked fine up til yesterday when i had to amend one of the views to include a reference to another data set.
Essentially the data is for students and comes from our old db and our new one, each year group has different values so the views act to extract all data relevant for a child from both databases and accross all year data sets.
The problem im having is that i can get the final stored procedure to run. It ran fine the other day but since ive amended one of the views i get timeout errors wherever it's run. real problem when query analyser which has no timeout settings (apparently) times out as it means i cant run the query anywhere....enterprise manager will timeout after 30secs despite amending the query timeout setting to 600s.
so im a bit stuck, both views which the problem view is trying to combine run in under 30 seconds...when you try and combine them it times out- seems to run for a long long time.
note sure why this has started happening, from all ive read most peeps get this with EM and solve it using QA. but what if QA cant handle the query either?
heres the sql: (wont make much sense but hopefully shows that its not a complex query)
SELECT TOP 100 PERCENT dbo.StudentDetMaster.SetId, dbo.StudentDetMaster.StudentId,
dbo.StudentDetMaster.Name,
dbo.StudentDetMaster.CourseYear,
dbo.StudentDetMaster.House,
dbo.StudentDetMaster.Tutor,
dbo.PGJSProfile.[Key Stage 1 Reading],
dbo.PGJSProfile.[Key Stage 1 Writing],
dbo.PGJSProfile.[Key Stage 1 Speaking & Listening],
dbo.PGJSProfile.[Key Stage 1 Maths],
dbo.PGJSProfile.[Key Stage 2 English],
dbo.PGJSProfile.[Key Stage 2 Maths],
dbo.PGJSProfile.[Key Stage 2 Science],
dbo.PGJSProfile.[Verbal Reasoning Year 3],
dbo.PGJSProfile.[Year 3 English Autumn],
dbo.PGJSProfile.[Year 3 English Year Group Average],
dbo.PGJSProfile.[Year 3 English Summer],
dbo.PGJSProfile.[Year 3 English Year Group Average Score], dbo.PGJSProfile.[Year 3 Maths Autumn],
dbo.PGJSProfile.[Year 3 Maths Year Group Average],
dbo.PGJSProfile.[Year 3 Maths Summer],
dbo.PGJSProfile.[Year 3 Maths Year Group Average Score], dbo.StudentDetMaster.[Year 3 Maths Set],
dbo.PGJSProfile.[Verbal Reasoning Year 4],
dbo.PGJSProfile.[Year 4 English Autumn],
dbo.PGJSProfile.[Year 4 English Year Group Average],
dbo.PGJSProfile.[Year 4 English Summer],
dbo.PGJSProfile.[Year 4 English Year Group Average Score], dbo.PGJSProfile.[Year 4 Maths Autumn],
dbo.PGJSProfile.[Year 4 Maths Year Group Average],
dbo.PGJSProfile.[Year 4 Maths Summer],
dbo.PGJSProfile.[Year 4 Maths Year Group Average Score], dbo.StudentDetMaster.[Year 4 Maths Set],
dbo.PGJSProfile.[Verbal Reasoning Year 5],
dbo.PGJSProfile.[Year 5 English Autumn],
dbo.PGJSProfile.[Year 5 English Year Group Average],
dbo.PGJSProfile.[Year 5 English Summer],
dbo.PGJSProfile.[Year 5 English Year Group Average Score], dbo.PGJSProfile.[Year 5 Maths Autumn],
dbo.PGJSProfile.[Year 5 Maths Year Group Average],
dbo.PGJSProfile.[Year 5 Maths Summer],
dbo.PGJSProfile.[Year 5 Maths Year Group Average Score], dbo.StudentDetMaster.[Year 5 Maths Set],
dbo.PGJSProfile.[Verbal Reasoning Year 6],
dbo.PGJSProfile.[Year 6 English Autumn],
dbo.PGJSProfile.[Year 6 English Year Group Average],
dbo.PGJSProfile.[Year 6 English Year Group Average Score], dbo.PGJSProfile.[Year 6 Maths Autumn],
dbo.StudentDetMaster.[Year 6 Maths Set],
dbo.StudentDetMaster.[JS Baseline],
dbo.PGJSProfile.[Year 6 English Mock],
dbo.PGJSProfile.[Year 6 Maths Mock],
dbo.PGJSProfile.[Year 6 English Mock Year Group Average], dbo.PGJSProfile.[Year 6 Maths Mock Year Group Average]
FROM
dbo.PGJSProfile LEFT OUTER JOIN
dbo.StudentDetMaster ON dbo.PGJSProfile.SetId = dbo.StudentDetMaster.SetId AND
dbo.PGJSProfile.StudentId = dbo.StudentDetMaster.StudentId
ORDER BY dbo.StudentDetMaster.Name
cheers
greg
[22003][0][Microsoft][ODBC SQL Server Driver]Numeric Value Out Of Range
Jul 23, 2005Hi,I have a php application connected through odbc to a sqlserver database.When I try to execute select queries on a smalldatetime table field Ireceive this message:Warning: [22003][0][Microsoft][ODBC SQL Server Driver]Numeric value out ofrangeThe query is something like:select dateField from tableTha field is a normal smalldatetime one:10/17/2001 12:35:00 PMWhith Query Analyzer the query works fine.I'm using php mssql_query() and ODBTP as protocol to connect to the DBMSThanksLuigi--Message posted via http://www.sqlmonster.com
View 1 Replies View Related[Microsoft][ODBC SQL Server Driver]Communication Link Failure
Nov 27, 2007Several of our customers are getting a message intermitantly throughout the day where the connection is closed. The message being generated is [Microsoft][ODBC SQL Server Driver]Communication Link Failure.
These messages started in the last two weeks.
Thanks for any direction that can be thrown my way.
David
Sql2005 ODBC Driver Manager Data Source Name Not Found And No Default Driver Specified
Feb 4, 2008i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup
Could not connect to the database, see error message below.
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
i am not sure yet if this is an issue with sql, php or phpbb
php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error
phpbb detects all the required server settings and sees that i have ms sql installed
any suggestions on what that error means or how to go about configuring odbc driver?
probably a simple issue. but i'm still new with sql stuff