Data Conversion Error On Excel Destination
Jan 9, 2007
I am inserting rows using OLEDBDestination and want to redirect all error rows to EXCEL Destination.
I have used Data Conversion Transformation to Convert all strings to Unicode string fields before sending it to Excel Destination.
But its gives the following error.
[Data Conversion [16]] Error: Data conversion failed while converting column 'A' (53) to column "Copy of A" (95). The conversion returned status value 8 and status text "DBSTATUS_UNAVAILABLE".
[Data Conversion [16]] Error: The "output column "Copy of A" (95)" failed because error code 0xC020908E occurred, and the error row disposition on "output column "Copy of A" (95)" specifies failure on error. An error occurred on the specified object of the specified component.
Can someone please tell me what should I do to make it work?
Thanks,
View 22 Replies
ADVERTISEMENT
Feb 8, 2006
In my SSIS project I am populating an Excel spreadsheet with several worksheets. When I define a worksheet in Excel Destination Editor, I use Create Table SQL statement to create a worksheet. Most of the fields are defined as numbers, however when job runs my numeric fields appear as text in Excel with yellow warning sign - 'The number in this cell is formatted as text or preceeded by an apostrophe'. I need my numbers to appear as numbers. Is there a workaround for this?
View 3 Replies
View Related
Jul 28, 2005
Good afternoon
View 32 Replies
View Related
Apr 9, 2007
I'm trying to build a DTSX package that FTP's an XML file to the local file system and then imports it into an existing table.
My "Data Flow" for the package starts with an XML Source component and then goes to Data Conversion component and then to an OLE DB Destination component.
It all executes with out error and seems to work fine, but when I look at the data in the table after I've run the package it seems to have inserted the appropriate number of rows from the XML file but all of the column values are NULL.
All of the data in the XML file is surrounded by <![CDATA[ ]]> and I discovered that if I remove the CDATA wrapper by hand then it inserts the data properly. The only problem is that I'm not in a position to have the data provider remove the CDATA tags and some of the data in the XML file needs the CDATA wrapper or else it will not validate.
Anyone know of anything I can do to get the CDATA to import properly?
View 15 Replies
View Related
Dec 15, 2006
[Flat File Destination [46500]] Error: Data conversion failed. The data conversion for column "Column 0" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page." What does this error mean exactly?
I am taking columns from a flat file source. Then I am adding some new columns then rewriting the file to a ragged file format with fixed column values. I've taken the Destination component off and it works fine. So I know it could be the destination component but what could it be? Any ideas?
View 6 Replies
View Related
Jul 11, 2006
ts my first time trying to set up a SSIS job using the import/export wizard to export the results of a query into an excel file.
i am using sql server 2005, windows XP SP2.
In the last step in the excel destination editor, in the connection manager when i am trying to select the excel file to write into i am getting this error.
'Microsoft.Jet.OLEDB.4.0 ' provider is not registered on the local machine.
I have set up the excel connection manager. i have changed the properties of the project to set
the Run64BitRuntime to false.
i am running the latest version of MDAC 2.8 on the machine too
please let me know if there is anything else i need to do to fix this.
thank you in advance
View 1 Replies
View Related
May 19, 2006
I'm trying to export data to an Excel destination. I'm receving the following error on a notes column which is an nvarchar(max) datatype.
Error: 0xC0202025 at Data Flow Task, Excel Destination [124]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
I realize that the charcater limit on an Excel cell is 32, 767 characters, but none of the test data that I'm using is close to that. I've also tried using ntext and receive the same error. When I change the datatype to nvarchar(4000), it works fine. I've also changed the destination to a flat file using nvarchar(max) and I don't receive the error. Unfortunately, our vendor specifies that they have to have an Excel file. Does anyone know what is causing this error, if it's a bug, or have any suggestions?
Thanks,
Wendy Schuman
View 6 Replies
View Related
Nov 28, 2007
I have an OLEDB source that i would want to ideally take in Excel with a dynamic file name. Right now, i am exporting the data successfully in a flat file (csv) destination. I checked the integrity and it seems like when i try opening the file with Excel ,one of the columns is not fitting in one cell, instead, its taking two cell space ?
With Excel , i was getting the error message saying "Field Name ABC cannot convert between unicode and non unicode string data types".
Any help is appreciated...
Thanks
View 4 Replies
View Related
Jun 25, 2007
I have created a package which transfers data from a SQL server source to an Excel Destination. The DataFlow Task works fine , if i pre-define the column names in the Excel Destination... But i run into an error when i give the blank excel sheet as my destination. I am unable to map any columns
A sample example is as shown above .. In the column mappings field only one column in the Excel shows up for mapping and eventually throws the error "[Excel Destination [42]] Error: The number of columns is incorrect. "
How do we proceed in this case , where in we do not want to give pre-defined coulmn names in the Excel Destination sheet.
Thanks,
D
View 4 Replies
View Related
Jan 26, 2007
I have a daily package that extracts some data and writes it into an excel file. I want to write over the existing data, but the excel destination only appends the next free location in the worksheet. I tried using a SQL task to grab the file, set all the cells = NULL and then run the rest of the package, thinking it would see the null cells as empty and write in them, but somehow it knows where the previous data ended and keeps appending further down in the workbook.
Does anyone know of a workaround so I do not have to delete and re-create the file everytime?
TIA,
Sabrina
View 14 Replies
View Related
Dec 5, 2007
I've SSIS 2005 SP2 and Excel 2007 installed. How come I do not see Excel 2007 on the Excel version list?
Thanks,
Ash
View 7 Replies
View Related
Dec 3, 2007
Hi i've 2 questions.
Q1 . I'd like to know if i have a data conversion before i export my data out to excel will it hold the data types in excel.
Q2. If i sort the data before i export my data out to excel will it hold the sort
View 1 Replies
View Related
Jul 10, 2007
I created a data flow with complaicated SQL. There is "type" field in the output column.
I would like to created excel files for each "type" value
E.g. If there is 3 "type" values (A, B, C), I would like to create 3 excel files to store type A, type B, and type C data respectively.
Since the number of possibe value of "type" field is various, how can I create the xls destination dynamic and move the correct type to the corresponding excel file?
The conditional split has fixed conditions, it is not suitable for by dynamic number of value
For Loop condition is not a good choice because I need to run the complicated SQL for many time.
Thanks.
View 1 Replies
View Related
Apr 25, 2008
Hello,
I am getting this warning message,when I am trying to load an excel file to a table
[Excel Source 1 [12717]] Error: A destination table name has not been provided.
These are the steps I am performing
EXCEL source
|
Data Conversion
|
OLEDB Destination
In the EXcel Source I have the Data Access Mode as
Table Name or View Name variable
Am I missing something.. I tried to give a default value in the variable and then I am getting this warning
Error at Data Flow Task [Excel Source 1 [12717]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
Error at Data Flow Task [Excel Source 1 [12717]]: Opening a rowset for "Order" failed. Check that the object exists in the database.
Any help is really appreciated.
Thank You.
View 4 Replies
View Related
Sep 21, 2006
Hi there,
I have designed a package that works perfectly well, exporting data to an excel file from an ole db source. The problem is that in the excel destination file, columns of data that originally were numbers, are formatted as text. It would be just annoying if it weren't because I use those figures in a pivot table that operates with them.
Any idea on how to tell Excel that those columns are numbers?
Thx in advance
View 9 Replies
View Related
Apr 18, 2008
I have 2 Excel sheets ( Sheet1 and Summary) in an excel output file.
Sheet1 is created and loaded with data fine.
Summary sheet is getting the following error:
Error: 0xC0202009 at Write Counts and Percentages to Summary Sheet, Excel Destination [337]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
Error: 0xC02020E8 at Write Counts and Percentages to Summary Sheet, Excel Destination [337]: Opening a rowset for "Summary" failed. Check that the object exists in the database.
I do have an execute SQL task to create the summary sheet before the data flow task.
The execute SQL task has
CREATE TABLE `Summary` (
`Counts_and_Percentages` LongText
)
Please advise on what I can do to troubleshoot/correct the error. Thanks
More details on the error
DTS.Pipeline] Error: "component "Excel Destination" (337)" failed validation and returned validation status "VS_ISBROKEN".
My Excel file name is an expression
@[User::FullFilePath] + (DT_STR, 4, 1252)DATEPART("yyyy", @[System::ContainerStartTime]) + "-" +
RIGHT("0" + (DT_STR, 2, 1252)DATEPART("mm", @[System::ContainerStartTime]), 2) + "-" +
RIGHT("0" + (DT_STR, 2, 1252)DATEPART("dd", @[System::ContainerStartTime]), 2) + " " +
RIGHT("0" + (DT_STR, 2, 1252)DATEPART("hh", @[System::ContainerStartTime]), 2) +
RIGHT("0" + (DT_STR, 2, 1252)DATEPART("mi", @[System::ContainerStartTime]), 2) +
RIGHT("0" + (DT_STR, 2, 1252)DATEPART("ss", @[System::ContainerStartTime]), 2) + " CLIENT=" +
@[User::ACCOUNT_NAME] + " output.xls"
View 4 Replies
View Related
Apr 19, 2008
I was trying to get my data from olb table to excel. but i got this error
my dataflow is as follows:
oledb source-> excel destination
i have got a excel file template at the destination all ready.
with the column names+ the sheet all ready.
but somehow it got stuck...
anybody can help?
thanks!
View 8 Replies
View Related
Jul 6, 2006
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
View 5 Replies
View Related
May 19, 2015
I am importing the Source: Excel 2007 (xlsx) to Destination:SQL Server DB Table..
One field had 739 records in that First 700 had General (i.e., Numeric ) last 39 had General(Alpha Numeric)
CT
-----
4564
45645
4548
0125
'''''
'''' 700 rows
ADF456
ADER156
DER1234
''''''
'''''39 rows
So I applied
:: REGEDIT:::
HKEY_LOCAL_MACHINESoftwareMicrosoftOffice14.0Access Connectivity EngineEnginesExcelTypeGuessRows ::TypeGuessRows value to zero (0)
IMEX=1
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=D:destination.xlsx;Extended Properties="Excel 12.0 XML;HDR=YES;IMEX=1";
But SQL Table Last 39 Records Dumped as NULL whichever is Alphanumeric. Why? Dynamically How Can I import without doing Text to column in Excel on that column ?
View 4 Replies
View Related
Aug 28, 2006
Recently installed Sql Server 2005 client and am now attempting to import data from a spreadsheet into an existing table. This works fine with Sql Server 2000 but I am getting data conversion truncation errors that stop the process when this runs using import utility in Sql Server 2005.
Any help would be appreciated.
View 1 Replies
View Related
Sep 2, 2015
1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.
2. How to override the existing file in excel destination.
View 2 Replies
View Related
Mar 8, 2008
I have a data flow that consists of
OLE DB source which calls a stored proc that returns a result set
data conversion
Excel destination
I am in design mode in Business Intelligence studio. My excel destination (with an Excel Connection) shows no sheet name though I have an execute SQL task before the data flow to create the excel table called SHEET1. Needless to say, there are no output columns visible to do any mappings. I did go to the ExcelConnection to set the OpenRowset Property to SHEET1 but it seems to have no effect.
I can do the export in SQL Server Management studio and that works fine, but it is basic and does not meet my requirements. I have to customize the package to allow dynamic Excel filenames based on account names and have to split my result set into multiple excel sheets because excel 2003 has a max of 65536 rows per sheet. Also when I use the export wizard, I have the source as a table and eventually the source has to be a stored proc with input parms.
What am I missing or doing wrong? Thanks in advance
View 6 Replies
View Related
Dec 18, 2006
i have an SSIS package that exports to an excel file. This works fine. the problem is that it appends the data instead of overwriting the file. Is there any way to overwrite the file like you can with a flat file? I have to email the file everyweek and don't want to have to clear it out manually. Any help would be appreciated
View 2 Replies
View Related
Sep 14, 2015
I have ssis package where I have excel connection manager with expression pointing to a variable which has path for location and name of excel spreadsheet to be create each with date on the name.ExcelFilePath points to variable for shared location where excel file will be saved.I have File system task for copying template excel file to destination location with date in file name.I drag and drop excel destination. Pointed to excel connection manager. Under data access mode, I have select table and view. When I try to select name of excel sheet, it says, no tables or views could be loaded. I should be able to see sheetname there so that I can map column. I only have option to create new spreadsheet. I want to use template to load data in excel file. I dont want to create new sheet. It was working before. But I opened the ssis package and its broken. I was able to see spreadsheet name before but I dont see it now even though I have not made any change to package. XCEL 12.0 XML;HDR=NO";
View 5 Replies
View Related
May 12, 2006
I am getting the following error running a data flow that splits the input data into multiple streams and writes the results of each stream to the same destination table:
"This operation conflicts with another pending operation on this transaction. The operation failed."
The flow starts with a single source table with one row per student and multiple scores for that student. It does a few lookups and then splits the stream (using Multicast) in several layers, ultimately generating 25 destinations (one for each score to be recorded), all going to the same table (like a fact table). This all is running under a transaction at the package level, which is distributed to a separate machine.
Apparently, I cannot have all of these streams inserting data into the same table at one time. I don't understand why not. In an OLTP system, many transactions are inserting records into the same table at once. Why can't I do that within the same transaction?
I suppose I can use a UnionAll to join them back together before writing to a single destination, but that seems like an unnecessary waste and clutters the flow. Can anyone offer a different solution or a reason why this fails in the first place?
Thanks in advance.
View 3 Replies
View Related
Jan 25, 2007
All,
I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.
"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."
Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.
Machelle
View 10 Replies
View Related
Jul 12, 2005
I'm trying to create a jbo to run in SQL that will update my table DeviationMaster in crcwebauth table, with the value from qvqote in table invoice_tbl in database crcbrio...I get an error in the job that says...SQLSTATE 42000 Error 8114 Error converting data type varchar to numericThe field DNumber in the DeviationMaster table is numeric 9, and qvqote is char 6.I know about the cast/convert, but I havent been able to successfully do this. I was hoping someone could show me how to get around this problem.Here is my current SQL statement that triggers the above error:update crcwebauth.dbo.deviationmaster set ldate = (select max(qvdate) from crcbrio.dbo.invoice_tbl where DNumber = qvqote)
View 11 Replies
View Related
May 18, 2004
I'm importing data from a text table, into a temp table, and then on to a final working table. I'm running into difficulty converting data from text into a 'datetime' format. I'm getting the following error:
"Arithmetic overflow error" when trying to convert into a column with the data type "DateTime"
I half expected it to reject all conversions into a Date format because of the source file being in text format, but it allows this conversion in other columns.
If I switch the Data type to 'nvarchar' instead of 'datetime' it converts and pops up with a date format.
My question is: Will this nvarchar that looks like a date behave like a date? For example, if someone tries to perform a calculation with a date format, will the nvarchar suffice, or would it cause problems?
Any ideas?
View 1 Replies
View Related
Feb 25, 2008
I have created an SSIS package
to run on a SQL 2005 server. This SSIS pkg was migrated from 2000 to 2005. There a Data transform task in that package to transfer data from a tbl on one server to another.
In source tbl, datatype is text, and in dest (2005 tbl) datatype is nvarchar(1000). This data transfer worked just fine , in 2000 but in 2005 it is giving the foll error.
But when I run my package, i get back the following error
'Column "xxx" cannot convert between unicode and non-unicode string data types'.
I tried using the data covnersion task, to convert to DT-STR, But is still failing.
View 11 Replies
View Related
May 13, 2008
Hi
I am getting the following error when I try to do a simple data conversion of columns, the columns I am converting are integer and nvarchar and I am converting them into DT_str.
[Data Conversion [16]] Error: Data conversion failed while converting column 'A' (53) to column "Copy of A" (95). The conversion returned status value 8 and status text "DBSTATUS_UNAVAILABLE".
[Data Conversion [16]] Error: The "output column "Copy of A" (95)" failed because error code 0xC020908E occurred, and the error row disposition on "output column "Copy of A" (95)" specifies failure on error. An error occurred on the specified object of the specified component.
Thanks
View 3 Replies
View Related
May 22, 2007
Hi,
I am transferring data from a Flat file source to SQL Database. Initially I got validation error saying
"Validation error. Import Employee Information: [DataFlowTask] [6384]: The column "[ColumnName] " can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported." ( i have 6 date fields)
The destination in SQL has the field in "datetime" format.
So i used a "Data Conversion" task to transform the fields, thereby resolving the validation errors. But when i Execute the dtsx I get the following error :
[Data Conversion [322]] Error: Data conversion failed while converting column "[ColumnName]" (79) to column "[Modified_ColumnName]" (346). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Data Conversion [322]] Error: The "output column "[Modified_ColumnName]" (346)" failed because error code 0xC020907F occurred, and the error row disposition on "output column "[Modified_ColumnName]" (346)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Data Conversion" (322) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
["InputFileName" Input [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "InputFileName Input" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Can anybody help me with this?
View 5 Replies
View Related
Dec 19, 2007
Hi all, I got this scope:
- SSIS and SQL server are on the same machine
- myPackage run perfectly on debug mode and also via DTSexec choosing from stored package directory
My problem is when try to run the REAL job.
Always got an error.
-----
The import process has failed: Unable to complete the phase pre-esecuzione for component SQL Server Destination "(97). Error code returned: 0xC0202071.
----
This is a generic error and don't give me any feedback...one time is on data task A another to diffrent.
SSIS pkg are compose by 34 data task...they insert into SQL server destination a RAW file source.
SQL destination is the same machine of SQL server services and files are store to another machine...is a share like
\BEWSSIS2007-12-18
I have try to run job with different agent (sql agent) and proxy user (same of the log-in sql server machine) where I 'm on.
But always have error.
Now, I'm death point, 'cause PKG run ok into Debug and DTSexec...job is failure and all logs that I write ara vague.
Some data task have big numbr of row like 95000, 625000, 53000....
But I have no one buffer error...anyway I have increase the defaultNumberOfMaxRow on the proprety for "my personal security" but no way out....
Can be a problem of buffer?? A memory problem, maybe I must use anyway DBole destination??
----------------------------
this error message on windows log under history SSIS...'cause I got an handler on PKG
---------------------------
Messaggio
Executed as a user: LQS1 sql. ... Ersion 9.00.3042.00 systems to 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Start: 15.52.26 Error: 2007-12-19 15:53:26.52 Code: 0xC002F210 Origin: Important Team Activities Run SQL Description: Running query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ recipients = 'myemail @ importance =' High ', @ subject =' Import site hours 19/12/2007 15.53.03 is Failure in task: SSIS: error sku task to define, @ body = 'The import process is failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error:" Incorrect syntax near activity. ". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters that do not correct ... Implementation of the package ... not rius Step failed.
-------------------------
SQLserver LOG from SSIS execution
----------------------
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients'myEMAIL', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error in task boxes Home products', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection.
Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEmail', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error in task boxes Home products', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(128). Error code returned: 0xC0202071.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(128). Error code returned: 0xC0202071.
Unable to prepare activity Added mass SSIS for data entry.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(128). Error code returned: 0xC0202071.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEmail', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error task Payment methods tasks', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection.
Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEMAIL', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error task Payment methods tasks', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection.
Unable to prepare activity Added mass SSIS for data entry.
Unable to prepare activity Added mass SSIS for data entry.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(169). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(169). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(169). Error code returned: 0xC0202071.
Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEMAIL', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error task Payment methods tasks', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection.
Enforcement query "EXEC msdb.dbo.sp_send_dbmail @ profile_name = 'ePrice Alerts', @ = recipients' myEMAIL', @ importance = 'High', @ subject = 'Import site hours 19/12/2007 15.52.50 is FALLITA in task: SSIS: error task Payment methods tasks', @ body = 'import process failed: Unable to prepare activity Added mass SSIS for data entry. ", @ body_format = 'TEXT' failed with the error: "Incorrect syntax near activity.". Possible causes: problems in the query, setting incorrect property "ResultSet" parameters set correctly or not problems activation of the connection.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(212). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(212). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(3409). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(3409). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(212). Error code returned: 0xC0202071.
Unable to prepare activity Added mass SSIS for data entry.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(3409). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(188). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(97). Error code returned: 0xC0202071.
Unable to prepare activity Added mass SSIS for data entry.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(188). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(150). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(97). Error code returned: 0xC0202071.
Unable to prepare activity Added mass SSIS for data entry.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(188). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(150). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(97). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(150). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(509). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(509). Error code returned: 0xC0202071.
Unable to complete the phase pre-esecuzione for component SQL Server Destination "(509). Error code returned: 0xC0202071.
Hope in someone...Alen Italy
View 16 Replies
View Related
Oct 2, 2007
I have an update query in an OLE DB Destination (access mode: SQL Command) that updates a table with an INNER JOIN from another table in another database. I'm getting the error, "No disconnected recordset available for the specified SQL statement". Does this have to do with the SQL query trying to access the other database? How can I get around this error?
View 4 Replies
View Related
