I have created an SSIS package
to run on a SQL 2005 server. This SSIS pkg was migrated from 2000 to 2005. There a Data transform task in that package to transfer data from a tbl on one server to another.
In source tbl, datatype is text, and in dest (2005 tbl) datatype is nvarchar(1000). This data transfer worked just fine , in 2000 but in 2005 it is giving the foll error.
But when I run my package, i get back the following error
'Column "xxx" cannot convert between unicode and non-unicode string data types'.
I tried using the data covnersion task, to convert to DT-STR, But is still failing.
I'm trying to create a jbo to run in SQL that will update my table DeviationMaster in crcwebauth table, with the value from qvqote in table invoice_tbl in database crcbrio...I get an error in the job that says...SQLSTATE 42000 Error 8114 Error converting data type varchar to numericThe field DNumber in the DeviationMaster table is numeric 9, and qvqote is char 6.I know about the cast/convert, but I havent been able to successfully do this. I was hoping someone could show me how to get around this problem.Here is my current SQL statement that triggers the above error:update crcwebauth.dbo.deviationmaster set ldate = (select max(qvdate) from crcbrio.dbo.invoice_tbl where DNumber = qvqote)
I'm importing data from a text table, into a temp table, and then on to a final working table. I'm running into difficulty converting data from text into a 'datetime' format. I'm getting the following error:
"Arithmetic overflow error" when trying to convert into a column with the data type "DateTime"
I half expected it to reject all conversions into a Date format because of the source file being in text format, but it allows this conversion in other columns.
If I switch the Data type to 'nvarchar' instead of 'datetime' it converts and pops up with a date format.
My question is: Will this nvarchar that looks like a date behave like a date? For example, if someone tries to perform a calculation with a date format, will the nvarchar suffice, or would it cause problems?
I am getting the following error when I try to do a simple data conversion of columns, the columns I am converting are integer and nvarchar and I am converting them into DT_str.
[Data Conversion [16]] Error: Data conversion failed while converting column 'A' (53) to column "Copy of A" (95). The conversion returned status value 8 and status text "DBSTATUS_UNAVAILABLE".
[Data Conversion [16]] Error: The "output column "Copy of A" (95)" failed because error code 0xC020908E occurred, and the error row disposition on "output column "Copy of A" (95)" specifies failure on error. An error occurred on the specified object of the specified component.
I am transferring data from a Flat file source to SQL Database. Initially I got validation error saying
"Validation error. Import Employee Information: [DataFlowTask] [6384]: The column "[ColumnName] " can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported." ( i have 6 date fields)
The destination in SQL has the field in "datetime" format.
So i used a "Data Conversion" task to transform the fields, thereby resolving the validation errors. But when i Execute the dtsx I get the following error :
[Data Conversion [322]] Error: Data conversion failed while converting column "[ColumnName]" (79) to column "[Modified_ColumnName]" (346). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Data Conversion [322]] Error: The "output column "[Modified_ColumnName]" (346)" failed because error code 0xC020907F occurred, and the error row disposition on "output column "[Modified_ColumnName]" (346)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Data Conversion" (322) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
["InputFileName" Input [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "InputFileName Input" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Using SQL Server 2005, I hve encountered a very strange error which I cannot figure out. The simplified stored proc below basically does a select and sorts the records based on the column name given in the @SortCol parameter. When I enter the field names bapk, jhpk, etc everything works fine. The records are returned sorted by the field name entered into the parameter. The first eight variables are field names and types When I enter the field name 'descr' into the @SortCol variable/parameter, I receive the error: Msg 295, Level 16, State 3, Procedure CMSCheck2, Line 28Conversion failed when converting character string to smalldatetime data type. I don't see where this is coming from at all. The problem is in the stored proc lines beginning with 'CASE @SortCol'If I take out the lines and just use OVER (Order By descr) as RowNum -- everything is fineIf I delete the line WHEN 'descr' THEN descr -- everything is fine, it just falls through to the default. What is the problem? Where is a conversion to smalldatetime coming from? I've been working on this one for a while, and cannot figure it out. It must be something simple. Thanks,Mike Thomas Below is the stored proc and a testing script TESTING SCRIPTUSE biz03GODECLARE @bapk int, @jhpk int, @transdate smalldatetime, @number smallint, @descr nvarchar(50), @debit decimal(9,2), @credit decimal(9,2), @cmonth tinyint, @StartRowIndex int, @MaxRows int, @AlphaChar varchar(1), @SortCol varchar(20) SET @MaxRows = 10SET @StartRowIndex = 0SET @SortCol = 'descr'SET @AlphaChar = ''EXEC [dbo].[CMSCheck2] @bapk, @jhpk, @transdate, @number, @descr, @debit, @credit, @cmonth, @StartRowIndex, @MaxRows, @AlphaChar, @SortCol STORED PROC ALTER PROCEDURE [dbo].[CMSCheck2] @bapk int, @jhpk int, @transdate smalldatetime, @number smallint, @descr nvarchar(50), @debit decimal(9,2), @credit decimal(9,2), @cmonth tinyint, @StartRowIndex int, @MaxRows int, @AlphaChar varchar(1) = null, @SortCol varchar(20) = nullASBEGINSET NOCOUNT ONDECLARE @lPaging bitIF @AlphaChar is null SET @lPaging = 0ELSE SET @lPaging = 1;WITH BankListTemp AS (SELECT bapk, jhpk, transdate, number, descr, debit, credit, cmonth, ROW_NUMBER() OVER (ORDER BY CASE @SortCol WHEN 'bapk' THEN bapk WHEN 'jhpk' THEN jhpk WHEN 'transdate' THEN transdate WHEN 'number' THEN number WHEN 'descr' THEN descr -- problem here -- WHEN 'debit' THEN debit WHEN 'credit' THEN credit WHEN 'cmonth' THEN cmonth ELSE bapk END) as RowNum FROM bank)SELECT TOP (@MaxRows) bapk, jhpk, transdate, number, descr, debit, credit, cmonth, RownumFROM ( SELECT BankListTemp.*, (SELECT COUNT(*) FROM BankListTemp) AS RecCount FROM BankListtemp) BankEND
[Data Conversion [14]] Error: Data conversion failed while converting column "Column1" (99) to column "Column1_Converted" (204). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Data Conversion [14]] Error: The "output column "Column1_Converted" (204)" failed because error code 0xC020907F occurred, and the error row disposition on "output column "Column1_Converted" (204)" specifies failure on error. An error occurred on the specified object of the specified component.
Can anyone tell me which Data Type should I use to convert string into integer.
Using SQL Server 2005, I have encountered a very strange error which I cannot figure out. The simplified stored proc below basically does a select and sorts the records based on the column name given in the @SortCol parameter. When I enter the field names bapk, jhpk, etc everything works fine. The records are returned sorted by the field name entered into the parameter. The first eight variables are field names and types
When I enter the field name 'descr' into the @SortCol variable/parameter, I receive the error:
Msg 295, Level 16, State 3, Procedure CMSCheck2, Line 28 Conversion failed when converting character string to smalldatetime data type.
I don't see where this is coming from at all. The @SortCol variable is always a string. It contains the name of a field. The problem is in the stored proc lines beginning with 'CASE @SortCol' .If I take out the lines and just use OVER (Order By descr) as RowNum -- everything is fine. If I delete the line WHEN 'descr' THEN descr -- everything is fine, it just falls through to the default.
What is the problem? Where is a conversion to smalldatetime coming from? I've been working on this one for a while, and cannot figure it out. It must be something simple.
DECLARE @lPaging bit IF @AlphaChar is null SET @lPaging = 0 ELSE SET @lPaging = 1;
WITH BankListTemp AS (SELECT bapk, jhpk, transdate, number, descr, debit, credit, cmonth, ROW_NUMBER() OVER (ORDER BY CASE @SortCol WHEN 'bapk' THEN bapk WHEN 'jhpk' THEN jhpk WHEN 'transdate' THEN transdate WHEN 'number' THEN number WHEN 'descr' THEN descr -- problem here -- WHEN 'debit' THEN debit WHEN 'credit' THEN credit WHEN 'cmonth' THEN cmonth ELSE bapk END) as RowNum FROM bank)
SELECT TOP (@MaxRows) bapk, jhpk, transdate, number, descr, debit, credit, cmonth, Rownum FROM ( SELECT BankListTemp.*, (SELECT COUNT(*) FROM BankListTemp) AS RecCount FROM BankListtemp) Bank
I'm trying to convert a column from a varchar(14) to float, some of the rows contain some non-numeric characters. I've tried to write a cursor to step through the records, run cast(col1 as float) on each record, then use if @@error <> 0 to capture an error but it doesn't work. It steps through fine but when the cast command fails it ends the execution of the script with "Error converting data type varchar to float."
How can i capture this error without having the script fail? Is there another way to get this done?
I am using the HitSoftware driver to pass data to an AS400 from a SQL 7 database. Data makes it fine to 2 of the 4 tables but I cannot get the syntax correct to even get out of the S/P edtitor in SQL for the other 2.
I have fields in the SQL S/P defined as VARCHAR. The target fields on the AS400 are ALPHA. So I figured the insert statement to look like:
hello, I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db. The problem I am facing is that i get errors when running bulk insert. The tables all have one extra column which is a primary key identity value. Additionaly, the column data types include: int, bigint, nchar, nvarchar, datetime and bit an example table looks like this:
So, what I do is: 1. for each table I generate a character format file with the following command: bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress 2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:
3. I run BULK INSERT BULK INSERT tablename FROM dataFile WITH ( FIRSTROW=2, FORMATFILE = formatFile DATAFILETYPE = 'char' FIELDTERMINATOR=' ' ROWTERMINATOR=' ' KEEPNULLS )
As a result of the above configuration I get this:
Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate). Msg 4865, Level 16, State 1, Line 1 Cannot bulk load because the maximum number of errors (10) was exceeded. Msg 7399, Level 16, State 1, Line 1 The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error. Msg 7330, Level 16, State 2, Line 1 Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert. I would appreciate any help, as I am running out of time Thank you.
Hello, I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db. The problem I am facing is that i get errors when running bulk insert. The tables all have one extra column which is a primary key identity value. Additionaly, the column data types include: int, bigint, nchar, nvarchar, datetime and bit an example table looks like this:
So, what I do is: 1. for each table I generate a character format file with the following command: bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress 2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:
3. I run BULK INSERT BULK INSERT tablename FROM dataFile WITH ( FIRSTROW=2, FORMATFILE = formatFile, DATAFILETYPE = 'char', FIELDTERMINATOR=' ', ROWTERMINATOR=' ', KEEPNULLS )
As a result of the above configuration I get this:
Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate). Msg 4864, Level 16, State 1, Line 1 Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate). Msg 4865, Level 16, State 1, Line 1 Cannot bulk load because the maximum number of errors (10) was exceeded. Msg 7399, Level 16, State 1, Line 1 The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error. Msg 7330, Level 16, State 2, Line 1 Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert. I would appreciate any help, as I am running out of time Thank you.
Here is what I get. Is this an install problem or is this how this software works??
===================================
Error at Data Flow Task [Data Conversion [720]]: An output cannot be added to the outputs collection.
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC020800F (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.InsertOutput(DTSInsertPlacement eInsertPlacement, Int32 lOutputID) at Microsoft.DataTransformationServices.Design.Controls.ComponentMetaDataTreeView.AddOutput()
I am inserting rows using OLEDBDestination and want to redirect all error rows to EXCEL Destination.
I have used Data Conversion Transformation to Convert all strings to Unicode string fields before sending it to Excel Destination.
But its gives the following error.
[Data Conversion [16]] Error: Data conversion failed while converting column 'A' (53) to column "Copy of A" (95). The conversion returned status value 8 and status text "DBSTATUS_UNAVAILABLE".
[Data Conversion [16]] Error: The "output column "Copy of A" (95)" failed because error code 0xC020908E occurred, and the error row disposition on "output column "Copy of A" (95)" specifies failure on error. An error occurred on the specified object of the specified component.
Can someone please tell me what should I do to make it work?
I have a DTS that pulls data in from a table in MysQL and inserts it into a tablle in SQL Server. it's failing when I run the step with the "requestd conversion is not supported" error, but when testing each single column copy in the Data Transformation step, it passes.
I just want an exact copy of the data.
the source MySQL table is....
CREATE TABLE `entry` ( `web_id` int(11) NOT NULL auto_increment, `web_name` varchar(40) NOT NULL default '', `web_email` varchar(60) NOT NULL default '', `web_cli` varchar(50) NOT NULL default '', `web_pu_id` varchar(60) default NULL, `web_answer` varchar(60) NOT NULL default '', `web_ddi` varchar(30) default NULL, `web_time_entered` datetime NOT NULL default '0000-00-00 00:00:00', `web_ip_address` varchar(20) default NULL, `web_entry_status` set('failed','success') NOT NULL default '', `web_polled` enum('true','false') default 'false', PRIMARY KEY (`web_id`) ) ENGINE=MyISAM;
and the SQl Server destination is....
CREATE TABLE [entry] ( [web_id] [int] NOT NULL , [web_name] [varchar] (23) NOT NULL , [web_email] [varchar] (37) NOT NULL , [web_cli] [varchar] (15) NOT NULL , [web_pu_id] [varchar] (15) NULL , [web_answer] [text] NOT NULL , [web_ddi] [varchar] (11) NULL , [web_time_entered] [datetime] NOT NULL , [web_ip_address] [varchar] (15) NULL , [web_entry_status] [varchar] (15) , [web_polled] [varchar] (15) NULL ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY] GO
ALTER TABLE [temp_webentry] WITH NOCHECK ADD CONSTRAINT [PK_tmpwebentry] PRIMARY KEY CLUSTERED ( [web_id] ) ON [PRIMARY] GO
"Bulk insert data conversion error (truncation) for row 1, column 1 (id)."
when you get the error above or similar in sql server 2000 does it continue inserting the data by truncating it or does it stop beacause looking at the data that i have got it seems to continue inserting the data but just truncates the colunm. i have tried it several time its seeems to be consistent.
I have data that has white spaces after the actual data e.g. '00093 ' hence i am happy aslong as i can be sure that it does always continue as i will be loading alot of data using a similar process.
hence my question is that will it load all the data all the time and just truncate it to fit the column size?
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1 Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode). Msg 7399, Level 16, State 1, Line 1 The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error. Msg 7330, Level 16, State 2, Line 1 Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK INSERTtbl_ASX_Data_temp FROM 'M:DataASXImportTest.txt' WITH (FORMATFILE='M:DataASXSQLFormatImport.Fmt')
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.
I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
I want to get Email address from sql database. But whenever I executed stored procedure I get an error message "Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int" If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*), CASE WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)' WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)' WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)' ELSE YEAR (0000)
[Code] ...
And got the same error. Â I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
I am extracting data from SQL Server 2005 to flat file destination. I am using SQL Command to specify the data selection query. One of my query uses Replicate function to derive a column value. When I execute this package it fails with the error "Data conversion failed. The data conversion for column "value" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page".
The reason for the problem is that, it is taking the InputColumnWidth of the flat file destination as 8000 and I specified the OutputColumnWidth as 4.
If I change the OutputColumnWidth to 8000, it is working without any error but resulting in the column width of 8000.
I tried using DerivedColumn Transformation's Type cast and DataConversion Transformation but still I am getting the same error in the respective Transformation components.
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
here is my code the falue of pr_h_reqby is "Test" Dim strconn As New SqlConnection(connstring) Dim myReqdata As New DataSet Dim mycommand As SqlDataAdapter Dim sqlstr As String = "select pr_H_reqby from tbl_pr_header where pr_h_recid = " & recid & "" mycommand = New SqlDataAdapter(sqlstr, strconn) mycommand.Fill(myReqdata, "mydata") If myReqdata.Tables(0).Rows.Count > 0 Then 'lblReqID.Text = myReqdata.Tables(0).Rows("reqid").ToString lblNameVal.Text = myReqdata.Tables("mydata").Rows("pr_H_reqby").ToString() lblEmailVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqemail").ToString() lblReqDateVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqdate").ToString() lblneedval.Text = myReqdata.Tables("mydata").Rows("pr_h_needdt").ToString() lblDeptval.Text = myReqdata.Tables("mydata").Rows("pr_h_dept").ToString() txtbxReqDesc.Text = myReqdata.Tables("mydata").Rows("pr_h_projdesc").ToString() End If
"pRecordSet" is an ADO recordset. The database column "MyColumn" is of type "decimal(19,10)".
The most important question for me is, if the regional settings of the database server or the regional settings of the client PC are considered during the conversion from the string to the decimal value. For example in standard French regional settings the "." would not be recognized as decimal separator.
I am also wondering if the language of the database instance, in which this data is saved, is considered during this conversion or any other settings of this database instance.
So my general question is: Does anybody know exactly what rules apply during the above mentioned conversion?
I have an odd problem that is driving me nutz. I have a very simple SSIS package that imports a 5 colum flatfile into a sql Server 2005 Table.
When I created this package with the wizzard, it will execute perfectly fine and processes all rows into the destination table.
But when I hit F5 to execute it manually it will fail before inserting a single row.
The error it generates is (Spalte 5 is a Datetime in the format DD.MM.YYYY) :
Error: 0xC02020A1 at Datenflusstask, Source - Daten_NC_1_txt [1]: Data conversion failed. The data conversion for column "Spalte 5" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Datenflusstask, Source - Daten_NC_1_txt [1]: The "output column "Spalte 5" (25)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Spalte 5" (25)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Datenflusstask, Source - Daten_NC_1_txt [1]: An error occurred while processing file "C:WorkDaten_NC_1.txt" on data row 177.
Edit: Modified the Title so it properly reflects the Problem & the Solution
