I need to have an automated process to read data from DB2/AS400 and feed it to SQL Server 2000. Has anyone done this before? Any suggestions how it may be done? I know my company doesn't want to spend a lot to do this.
Thanks for your time.
I have an ODBC link to DB2 Database. I can see the values of the DB2'stables in Access but not in SQL Server DTS.IN DTS, I connect the Source but when i want to see the values in theData transformation task, i have this message :HResult of 0x90040e37 (-2147217865) returned. Erreur inattendue. Unrésultat d'erreur a été renvoyé sans message d'erreur.Someone have a solution?
View 1 Replies View RelatedI need to live update my SQL-Server 2000 database from AS400 database.
I usually use Access 2002 database between the AS400 database and the SQL-Server 2000 database to reflect any live update.
I use the (Link Tables...) option when creating a new table in access and link it with the ODBC to connect with the AS400 database.
After that I work with the Access link table.
Is there any tool in SQL-Server 2000 to show the live transactions in AS400 databasee so I can work on it?
Please advise
Hi all,
I am working at insurance company that using AS400 as it main server. All transaction data is already kept for about 10 years (or even more..). This data is growing larger from time to time, and after several upgrades (that cost a lot!), my supervisor has an idea to partly move the data from AS400 to SQL Server. (since the cost for upgrading sql server is cheaper than AS400).
So.. let say, we only want to kept data in AS400 from 4 years before until now (2004 – 2007), and the rest of data is kept in SQL Server.
So first, all transaction data from 1997 – 2003 is transferred to SQL and deleted in AS400.
If user queried data and didn’t found the data in AS400, it will search the SQL, if data is found in SQL, then data is transferred back to AS400 and deleted in SQL.
I’m using SQL Server 2000 DTS (use HiT OLEDB) to transfer the data from AS400 to SQL and vice versa.
I wanna ask if anyone has done this before? What’s the difficulties by using this approach? (btw, I will implement the DTS using user control in vb.net)
Or anyone has a better solution to overcome this problem?
Thanks,
[RU]
Is there a good way to port data from an AS400 over to SQL server 2005? If anyone has any experience with this, can you tell me where to go to get info?
View 3 Replies View RelatedHi Guys
I am trying to replicate data from DB2/AS400 to SQL Server2005 (ENT edition) currently we use 3rd party tool to replicate data from DB2 to SQL Server2000 (ENT edition) and like to get rid of this 3rd party tool. I am searching for the last 3 weeks but didn€™t get a good starting point. I have linked DB2 to SQL Server2005 and can run queries against DB2/AS400 box. Now I want to set up transactional replication from DB2 to SQL Server 2005. I have read about peer to peer topologies but I don€™t know if that€™s the route I have to take?
So can someone please help me? I really appreciate your help.
Thanks
Tariq
Hello Friends,
I would like to know what Data Feed means while working as an Administrator on Ms SQL Server 2000?
Also what do you mean by integrating feed of data?
I would appreciate it if anyone could help me out with this queries...
Also I was wondering which would be best book to refer while learning about ms sql server 2000.
Hello,I have an XML data feed that I would like to use to create tables inSQL Server. The xml data feed consists of a large amount ofinformation that changes on a regualar basis. Is there a way toautomatically create SQL Server tables using the data feed?ThanksBilly
View 7 Replies View RelatedHello
I am trying to link SQL2000 to AS400. I have created the link and can access the data on the Server, but when I try to access from a client I get the following error:
Error 7399: OLE DB Provider 'MSDASQL' Reported an error. Data Source Name not found and no default driver specified.
Has anyone run into this and if so does anyone have a solution to this problem?
Any help would be greatly appreceiated.
Thanks
Phil
Does anyone know where to start if I want an exported copy of homeappliances, cars, cell phones etc.I just need to populate my database and I want to get some data feedfrom all the different types of manufactures.I think there are services out there. But I have not seen one.I want a CSV file that has all the make/models for lets say: TVs
View 1 Replies View RelatedGreetings,
I need some help determining the best way to accomplish my task. The workflow starts by generating a list of unique ID's from a local table. Then take that list of unique ID's and query an Oracle table for all matching records.
My thought was to first use an Execute SQL task with the following SQL:
select projectid from projectlist group by projectid
with Result Set configured as follows:
Result Name = projectid
Variable Name = varProjectIDList
Then in the Data Flow Task add a DataReader Source to pull the matching data. Here's where I'm getting hung up. I'd like to pass the result set from the Execute SQL task. I tried the following SQL but it doesn't work.
select * from masterlist where projectid = @[User::varProjectIDList]
I'm open to any suggestion on the best way to take my unique list and use it as input for a query against my Oracle DB.
Thank you for your ideas.
Rob
I have 1 table that is just a list of feeds. A, B, C, D etc (15 rows in total) and each feed has other information attached to it such as Full name, location etc etc. I am only interested in the Feed column.
Each feed then has a corresponding data table which contains a list of records. Eg Feed A data is contained in TableA, Feed B data is contains in TableB and so on.
Basically what I need is a combined table that shows the list of Feeds in the 1st Column ( So A, B, C, D…..) and then a second column which counts the records from each separate data table corresponding to that feed.
So the end result would look something like this:
Feed------No of Records
A----------4 (from TableA)
B----------7 (from TableB)
C----------8 (from TableC)
D----------1 (from TableD)
Possible?
I'm trying to find a way to import data from this data xml feed to get daily exchange rate. I' tried:
select *
from
openrowset(bulk 'http://www.bankofcanada.ca/stats/assets/xml/fx-noon.xml',single_blob) as x
Which is a feeble attempt at a start; however, am getting this error message:
Cannot bulk load because the file "http://www.bankofcanada.ca/stats/assets/xml/fx-noon.xml" could not be opened. Operating system error code 123(The filename, directory name, or volume label syntax is incorrect.).
How to parse this file using SQL.
I am trying to use FOR XML under SQL Server 2014 to write out a large XML data set. I want it to look like
<CVS_Member_Add_Change>
  <RecordType>3</RecordType>
  <Carrier>1266</Carrier>
  <MultiBirthCode>0000000</MultiBirthCode>
  <MemberType></MemberType>
[Code] ....
That's how it looks when you click on the results of a small subset of the query. Â Just what I want. Â Unfortunately when you try to right click and save it you getÂ
<dataroot><CVS_Member_Add_Change><RecordType>3</RecordType><Carrier>1266</Carrier<MultiBirthCode>0000000</MultiBirthCode><MemberType></MemberType<LanguageCode>1</LanguageCode><DURFlag></DURFlag><DURKey></DURKey><SocialSecurityNumber>000000000</SocialSecurityNumber</CVS_Member_Add_Change>
Everything being on one line blows up the translator application that reads the data.
The FOR XML statement copied out of the query is below.
FOR XML RAW ('CVS_Member_Add_Change'), ROOT('dataroot'), ELEMENTSÂ
GO
Is there a way in the T-SQL to force it to break lines neatly?
Is there a way to force it to a specific file name or directory?
Hi every one
I want to generate a RSS Feed from SQL Server 2005.
The scenario is that when a record is entered in the database, the database fire a trigger which generate rss feed for the new record entered in the data base
Thanx in advance
Take care
Bye
Hello,
I have de same problem that you have to get data from AS/400 to SQL Server 2005 using the SQL Server Import and Export Wizard.
Did you successfully? If yes how please?
I have used:
IBM DB2 UDB for iSeries IBMDA400 OLE DB Provider,
IBM DB2 UDB for iSeries IBMDARLA OLE DB Provider,
IBM DB2 UDB for iSeries IBMDASQL OLE DB Provider,
Microsoft OLE DB Provider for DB2
Regards
Rui Martins Santos
RMS
I am attempting to transfer a table from an AS400 to SQL Server 2005 through SSIS. I am using the IBM DB2 UDB ISeries IBMDASQL OLEDB Provider as the source connector. I have tried to set up the source connector using the Table or View option but it says that No Tables Could Be Loaded. I can specify an SQL command and it shows the columns and appears to set up correctly except for showing a warning indicating that it cannot retrieve the column code page information from the OLEDB provider. When I run the job, it fails with the following error:
View 16 Replies View RelatedI've been trying to use the integrations services to access AS400 data with almost no success. Any suggestions or help you can give me would be appreciated. Some of the issues I can't make sense of are the following.
View 11 Replies View RelatedHow do i import As400 data in to SQL2005(standard version) using SSIS?? Please help!!!
View 1 Replies View RelatedAnyone writing data to DB2 on an AS400 with SSIS?
I cannot get the OLEDB destination configured correctly. I can set the destination up with a SELECT sql query, and preview the resultset.
I am creating a migration tool that retrieves data from an AS400 and an SQL 7 server to create a new database in SQL 2005. I have managed to create a linked server in SQL 2005 to the AS400. I don't know if it works or not. I've been trying to create a linked server to the SQL 7 server with no luck. The AS400 and SQL servers are on the same network. The SQL 2005 server is hosted somewhere else. I have access to everything. The SQL 2005 server is running Workstation. I tried to use Integration Services but finally discovered it was unavailable to Workstation.
I could use some good ideas or help.
When I execute the package in Debug mode, it works.
I then import the package into SQL Server 2005 and it is showing under Stored Packages --> MSDB - AS400Package
I can right click and Run Package from there and it works fine.
When I set the package up to run as a job, it fails. What I have noticed is that the Sign On that I use in the package shows that there was in "invalid login" after the job fails.
I hope I have this post in the right place and hope I have left enough information behind to help. If not let know what else I need to post. I have only been using Business Intelligence Development for a couple days and SQL Server 2005 for about a week or so. All of the SQL DTS packages that I have created seem to be working fine with their jobs as well as my stored procedures.
Thanks for any help you can give me.
I have a simple SSIS package that I want to move data from SQL 2005 to DB2/AS400. In order to use OLEDDB destination, I installed HIS2004 that provides DB2OLEDB support.
For simplicity and testing purpose, I created a connection pointing to a SQL table that contains only one ccolumn "last_name" of type "nvarchar(50)". This is my source, I then created another connection using DB2OLEDB pointing to a table on DB2 that contains only one field "name" of type "GRAPHIC(50)". This is my destination and the connection works fine to DB2 database. When I run the package, it has type conversion error as follows:
[OLE DB Destination [34]] Error: An OLE DB error has occurred. Error code: 0x00040EDA. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E07 Description: "Data or literal value could not be converted to the type of the column in the data source, and the provider was unable to determine which columns could not be converted. Data overflow or sign mismatch was not the cause.".
If I manually assign a vaule to the "last_name" using the "Derived Column" task like "Hello John", it just works fine.
Anyone knows what went wrong? Did I miss anything here? Thanks.
As a FYI: DTS works great in moving data from SQL 2000/2005 to DB2.
Your help will be appreciated.
I have been trying to transfer some data from a file located in a AS400 Server to SQL , but the file has more than one Member Name. I'm not sure how to specify a different member name on the SQL query . Please help.
The name of the file is:
Library = MTGLIBP2
File Name = CHSAVQPL
Member Name = INS
this is the query I have so far but I still need to reference the Member Name
SELECT *
FROM OPENQUERY(AS400PL,'SELECT * FROM mtglibp2.CHSAVQPL')
I created a SSIS package moving data from a SQL 2005 table to an existing DB2 table on AS400 using Microsoft OLE DB Provider for DB2.
When the package was run, it showed that rows were successfully inserted to DB2. However, the data didn't seem to be converted correctly. Most of the string values were inserted as unusual characters. Also any string values of digits were not inserted.
For example, 1.) a character field (char(1) or nchar(1) as I have tried both types) in SQL 2005 table with a simple value of 'H' was inserted into the DB2 table field of type "A" (alphanumeric) of length 1 as 'ç' and others letters were inserted as other unusual characters. 2.) A string value of '00100' in SQL Server is not inserted to DB2 table at all.
Later we found that the fields inserted with usual characters are difined as CSSID =65535. A few fields with correct data inserted have CSSID=00037.
Does anyone know why this happened and how to solve this to get the data inserted correctly in the DB2 table?
Thanks in advance for any help!
Is there a as400/db2 native provider to extract data?
View 9 Replies View RelatedHi
I would like to be able to feed the List of tables to the Transfer SQL Server Object Task dynamically.
I have got a foreachloop container which it feeds the table names into a variable @table_name (string).
Transfer SQL Server Object Task is with in foreachloop container
I did add an expression into the property of Transfer SQL Server Object Task and assign the tablelist property to @table_name
I would be grateful if you can give me any hint.
Thanks
S
Hi All,
I want to Import data from AS400 to Sql2005. From the Sql Management studio I invoke the Import Data wizard. For the source I connect to the ISereis system and for the Destination I select the Sql2005 Database , When I go to the next step i.e select source tables I get the error
"An error has occured which the SQL Server Integration Wizard was not prepared to handle
No error message available,result codeB_E_CANTCANCEL(0*80040E15).(System.Data)" .After this I am unable to proceed further. I am using client Access tool to connect to ISereis
IBM DB2 UDB for isereis IBMDA400 OLE DB Provider
Regds,
Anu
Hi,
Yesterday I had posted a query of How to transfer the Data from AS400 files to Sql 2005 tables with DTS and the error I received for the same. I am not able to view the replies since it has been deleted. Pls repost the same. I posted the query expecting for a solution but instead my question was deleted..... the very purpose of forum is defeated.
Regds,
Anu
I'm trying to connect SQL SERVER with my AS/400.
I linked my as400 with linkedserver.
When I execute a query with analyse query it works fine, but if I make a store procedure as schedule this job to get information from my as400 I got this msg:
Executed as user: NT AUTHORITYSYSTEM. OLE DB provider 'IBMDA400' reported an error. Access denied. [SQLSTATE 42000] (Error 7399) OLE DB error trace [OLE/DB Provider 'IBMDA400' IUnknown::QueryInterface returned 0x80070005: Access denied.]. [SQLSTATE 01000] (Error 7300). The step failed.
Why? anyone have any idea?
thx
I have been tring to connect to the as400 through the IBM ODBC (IBMDA400),
but have run into a wall. I was wondering, could i set up the 400 in SQL Server 2K as a DB or Table or something and maybe access it through SQLOLEDB?
Thanks
fvlmasl2
Hi, I am trying to edit some data from a SQL2000-datasource in ASP.NET 2.0 and have a problem with a column that has bit-data and is used for selection. SQL2005 works fine when declaring <SelectParameters> <asp:Parameter DefaultValue="TRUE" Name="APL" Type="boolean" /> </SelectParameters>When running this code with SQL2000, there are no error-msgs, but after editing a record the "APL"-column looses its value of 1 and is set to 0. Looks like an issue with type-conversion, we've hit incompatibilities between SQL200 and 2005 with bit/boolean several times before. So, how is this done correctly with SQL2000? (I've tried setting the Type to "int16" -> err. Also setting Defval="1" gave an err) ThanksMichael
View 2 Replies View RelatedI have been asked to make it possible for our SQL 7 server to pull infromation from AS/400 and utilize it in web applications, and such. Is there any way of doing this? I have heard that you can export the data on the as400 to a DB2 file, and import it with SQL. Is this the only way of access info off of the 400?
View 2 Replies View Related