I encountered this error while running a data flow:
OnError,,,Data Flow,,,10/14/2007 2:00:57 AM,10/14/2007 2:00:57 AM,-1073450974,0x,SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Business Unit Lookup 1" (26410) failed with error code 0xC004702C. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I'm using OLEDB Source, Lookup, SQL Destination in the data flow.
I tried running the package again and it worked fine this time.
i am facing a memery problem error while i am running the SSIS package while i am running the package it show the following Error
In Spend Dataload package: A buffer failed while allocating 70485760 bytes.
-------------------------------------------------------------------------------- In Spend Dataload package: The system reports 54 percent memory load. There are 3747647488 bytes of physical memory with 1694883840 bytes free. There are 2147352576 bytes of virtual memory with 1061253120 bytes free. The paging file has 7328251904 bytes with 5083856896 bytes free.
-------------------------------------------------------------------------------- In Spend Dataload package: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
-------------------------------------------------------------------------------- In Spend Dataload package: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (2718) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
-------------------------------------------------------------------------------- In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
-------------------------------------------------------------------------------- In Spend Dataload package: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
-------------------------------------------------------------------------------- In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
is there anyone know the solution of that problem and please dont tell me to use extra memery or a hardware solution as this option is not available.
I am trying to transfer the data from flat file to sql server.When I am running the package on local server(network server) it works fine.But when I use it to transfer the data to online server it starts and shows 2771 rows transfered and remains on that only, dosent stop or give a error. When i stop the execution I get the following errors:
[DTS.Pipeline] Error: The pipeline received a request to cancel and is shutting down.
[Loose Diamond File [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "Loose Diamond File" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I have a package that runs fine by itself. But when I run it inside a Foreach Loop container on a parent package, I got a buffer error after a few loops. Here are a couple of the error lines:
A buffer failed while allocating 49085616 bytes.
The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
I already played around with the Data Flow task€™s DefaultBufferMaxRows and DefaultBufferSize properties, and I am still getting the error. Just wondering if there is a memory leak or something with the Foreach Loop task. I haven€™t install SP1. Maybe SP1 fixes this issue?
I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.
I am loading data from .csv file to OLE DB Destination.
This data flow task is placed inside For each loop container.
is this issue because of any performance issue in SSIS packages such as buffer size.
find the error below:
DFT Load Data from FlatFile:Error: The conditional operation failed. DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.Â
The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Dear All! My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database. Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any Thanks
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
Hi all! I recently started working with SSIS and one of the things that is puzzling me the most is what's the best way to go:
A small control flow, with large data flow tasks A control flow with more, but smaller, data flow tasksAny help will be greatly appreciated. Thanks, Ricardo
Hi, I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog: http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM. However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
The same package works fine against a similar test table with 150k rows. http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table. Any hints,advice would be appreciated.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
I am working on importing an Excel workbook, saved as multiple CSV flat files, that has both group level data and related detail row on the same sheet. I have been able to import the group data into a table. As part of the Data Flow task, I want to be able to save the key value for the group, which I will use when I insert the detail rows.
My Data Flow has the following components: The flat file with the data, which goes to a derived column transformation to strip out extraneous dashes, which leads to the OLEDB Destination component.
I want to save the value as a package level variable, so that I can reference it in another dataflow.
Is this possible, and if so, at what point do I save the value?
Hi. We're experiencing the exact same problem described in this post: http://tinyurl.com/ynqv7o We've tried the 11 steps described there and it didn't fix the problem -- just as it didn't fix it for that person.
Hi, I am using SQL Server 2005. I got the following error in event viewer. Tried to search info from web failed. Does anyone have idea? Thanks a lot :)
[Log]=Application [EventID]=17806 [Source]=MSSQLSERVER [Time]=02-07-2007 23:35:56 [EventMsg]=SSPI handshake failed with error code 0x80090308 while establishing a connection with integrated security; the connection has been closed. [CLIENT: 202.40.9.176]
My developers are getting a "Failed to retrieve data for this request error" in SQL Server Management Studio. When I look in the SQL Server logs there are two errors logged: Source Logon Message Error: 17806, Severity: 20, State: 2. Source Logon Message SSPI handshake failed with error code 0x80090311 while establishing a connection with integrated security; the connection has been closed. [CLIENT: IP Address] I can€™t seem to find any information about these errors. Any ideas?
I have a SQl2k8 R2 up and running on a win2k8 R2, I have a domain controller as well with AD 2k8 R2. It works fine but from time to time I receive a dozen of successive alerts like th folowing
DATE/TIME:      11/22/2010 12:19:57 PM  DESCRIPTION: SSPI handshake failed with error code 0x80090311, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.  COMMENT:      (None) JOB RUN:           (None)
I understand from some threads here that it is an issue related to contacting the AD. In event viewer it is not clear what is casuing this. I have WSS databases, Biztalk server databases.....and some other user databases. NO home made applications contact sql server.  What is the best route to follow to see who is not being able sometimes and why contacting the AD. I read the thread at URL.... but it is related to express 2005 and it does not apply to my case.
Hi, I am using SQL Server 2005. I got the following error in event viewer. I tried to search on web the solution but failed. Does anyone have idea on that? Many thanks :)
Log]=Application [EventID]=17806 [Source]=MSSQLSERVER [Time]=02-07-2007 23:35:56 [EventMsg]=SSPI handshake failed with error code 0x80090308 while establishing a connection with integrated security; the connection has been closed. [CLIENT: 202.40.9.176]
Im trying to login to sql from an external client but I keep getting these messages
Event Type: Error Event Source: MSSQLSERVER Event Category: (4) Event ID: 17806 Date: 29.11.2007 Time: 15:49:23 User: N/A Computer: xx Description: SSPI handshake failed with error code 0x80090302 while establishing a connection with integrated security; the connection has been closed. [CLIENT: xxxx]
Event Type: Failure Audit Event Source: MSSQLSERVER Event Category: (4) Event ID: 18452 Date: 29.11.2007 Time: 15:49:23 User: N/A Computer: xx Description: Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: xxxx]
This only happens when the SQL server has these policies applied:
Policy Setting
Network security: Do not store LAN Manager hash value on next password change Enabled
Network security: LAN Manager authentication level Send LM & NTLM - use NTLMv2 session security if negotiated
Hi! Have a problem to execute xp_cmdshell with a proxy user in MSSQL2005 (9.00.2047.00). The error is:
Msg 15121, Level 16, State 10, Procedure xp_cmdshell, Line 1 An error occurred during the execution of xp_cmdshell. A call to 'CreateProcessAsUser' failed with error code: '1314'.
The proxy user is a local administrator on the sql server machine. The proxy user have €œReplace a process level token€? rights thru the group SQLServer2005MSSQLUSer (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=627221&SiteId=1).
I have even tried to use a domain administrator as proxy user, but the same error occur.
What is wrong? I have search the internet a lot and found that many people have this problem without any answer.
I have a SQL Server Agent job with a step to execute an SSIS package. The package has as one of it's connection managers the Connection Manager For Excel Files. When I run the job it fails every time. I have implemented logging and in the OnError event it states "The AcquireConnection method call to the connection manager "LOBMappingExcel" failed with error code 0xC0202009".
I get this error when trying to run xp_cmdshell. I have turned on xp_cmdshell via sp_configure and verified it is on (set to 1) by running sp_configure again. The login trying to run xp_cmdshell has sysadmin privileges. If anyone has a solution please let me know.
I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
I have to extract, dayly a list of contacts on a exchange server in a table on our EDW on sql server 2005. Is it possible to get the information directly from a dataflow or i will have to developpe a script task ?
I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.
While executing the tasks, I got the error Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid. Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.
After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
Hi, all experts here, Do we always have to use SCD component for the loading of data into data warehouse to handle changes of rows? I am looking forward to hearing from you and thank you very much in advance for your help. With best regards,
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task. I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert. Thanks
