Hi,
I have one data flow control. Source is SQL server and destination is flat file destination. I have one derived column placed in between these two. This functionality works fine. I would like to sum one column data and count total no. of columns and put it in global variable. How can I achieve it?
Thanks,
Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg
The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.
I am trying to use a CTE in an OLE DB Command data flow transformation object. However, when I enter the cte and corresponding query in the SqlCommand field of the OLE DB command editor dialog, I get a syntax error. Can CTE's be used data flow objects? I have been able to use them in an Execute SQL Control Flow Item, but not in any data flow item.
Hi,
I'm creating a custom data flow transformation in c#.
I would like to use expressions within this component in the same way as in the derived column component: specifying the expression as a custom property of an output column, then evaluating this expression for each row of the buffer and using this evaluated expression to populate my output column values.
So I've added an custom expression on my output column, and set its expression type to CPET_NOTIFY
IDTSCustomProperty90 exp = col.CustomPropertyCollection.New();
exp.Name = "Expression";
exp.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
But in the ProcessInput method I don't manage to get the evaluated expressions, when I use exp.Value I get my expression definition and not its evaluation.
Is there a way to get these evaluated expressions ?
Thanks,
Stéphane
Hi,
I've created my own custom data flow transformation task (using C#) that
will parse a fullname and output the various name parts. In the
ProvideComponentProperties method, I create 5 output columns (prefix, first, middle,
last, and suffix). In the ProcessInput method, I parse the input and add the
name parts to the buffer. The bad thing is that I€™m making an assumption on
the position of the Full Name input column within the buffer.
I would like the €œuser€? to be able to map their "full name" input column to a known Full Name column so I don€™t have to make any assumptions. This is the first
SSIS task I€™ve tried to create and I haven€™t been able to find very many
examples online.
Any help is greatly appreciated!
Thank you,
Marshall
Using SSIS to import from Excel to SQL Server.
In Excel they are showing Sale as -ve quantity and purchase as +ve quantity.
The database has quantity always as +ve figure and a separate column "isPurchase" set to true or false depending on whether purchase or sale.
So I need Derived Column to return a bolean (or int) depending whether quantity is positive or negative. I tried each of the following in the Expression but all of them were invalid expressions.
CASE WHEN [TotalQuantity] > 0 THEN 0 ELSE 1 END
If [TotalQuantity] > 0 THEN 1 ELSE 0 END
IIF ([TotalQuantity] > 0, 1,0)
Can anyone help me with correct syntax, or correct Data Flow Transformation if Derived column is wrong.
Thanks
Richard
I created a custom transform that has a custom interface and is a wizard that uses a web service. It creates custom properties and output columns on the fly. I set the dialog result to Ok and close at the end of the steps. The transform then has the custom fields and output columns I created in the wizard. I've verified this by right clicking on the transform and going to the advanced editor. If I then immediately run the package, the custom fields don't exist in the CustomPropertiesCollection. If I close the package and reopen it, the properties now are gone. If I then go through the wizard again, thus recreating the properties, they stay and don't disappear. The quickest way to get a working transform is to add it to my data flow then save, close and reopen the package and then go through the wizard. Just saving after I add the transform does not help.
Does anyone know what might be causing this very strange problem?
Hello Helpers,
I need to know how to use my private function - created as a scalar-valued-function in SQL Server 2005 - in script component (here a transformation is used) in a data flow task to transform a two-digit-month into a tree-sign-month:
Example: '01' should be transformed into 'Jan'
Many thanks for alle your commitment and help!
Ulrike
Hi,
I have Variable , data source and conditional transformation which checks the count(*) if the count == 0 then I connect an script component and change variable to false(initial it is True) and write into a log file...
Then I check that variable on predence constarint at workflow if variable==True then success. BUT
Whenever I run the package my dataflow gets green even the condition does not meet like count==0 . So
my variable's value is "False". Actually if the condition doesnt meet then my script shouldnt work.
Am I missing something???
I've built a simple custom data flow transformation component following the Hands On Lab (http://www.microsoft.com/downloads/details.aspx?familyid=1C2A7DD2-3EC3-4641-9407-A5A337BEA7D3&displaylang=en) and the Books Online (ms-help://MS.MSDNQTR.v80.en/MS.MSDN.v80/MS.SQL.v2005.en/dtsref9/html/adc70cc5-f79c-4bb6-8387-f0f2cdfaad11.htm and ms-help://MS.MSDNQTR.v80.en/MS.MSDN.v80/MS.SQL.v2005.en/dtsref9/html/b694d21f-9919-402d-9192-666c6449b0b7.htm).
All it is supposed to do is create an output column and set its value to the result of calling a web service method (the transformation is synchronous). Everything seems fine, but when I run the data flow task that contains it, it doesn't generate any output. The Visual Studio debugger displays it as yellow, with 1,385 rows going into it, but the data viewer attached to its output is empty. The output metadata looks just like I expect: all of my input columns plus the new column, correctly typed. No validation or run-time warnings or errors are reported.
I'll include the entire C# file below, which only overrrides the ProvideComponentProperties, Validate, PreExecute, ProcessInput, and PostExecute methods of the parent PipelineComponent class.
Since this is effectively a specialization of the DerivedColumn transformation, could I inherit from the class that implements the DC component instead of PipelineComponent? How do I even find out what that class is?
Thanks! Here's the code:
using System;
// using System.Collections.Generic;
// using System.Text;
using Microsoft.SqlServer.Dts.Pipeline;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
namespace CustomComponents
{
[DtsPipelineComponent(DisplayName = "GID", ComponentType = ComponentType.Transform)]
public class GidComponent : PipelineComponent
{
///
/// Column indexes for faster processing.
///
private int[] inputColumnBufferIndex;
private int outputColumnBufferIndex;
///
/// The GID web service.
///
private GID.WS_PDF.PDFProcessService gidService = null;
///
/// Called to initialize/reset the component.
///
public override void ProvideComponentProperties()
{
base.ProvideComponentProperties();
// Remove any existing metadata:
base.RemoveAllInputsOutputsAndCustomProperties();
// Create the input and the output:
IDTSInput90 input = this.ComponentMetaData.InputCollection.New();
input.Name = "Input";
IDTSOutput90 output = this.ComponentMetaData.OutputCollection.New();
output.Name = "Output";
// The output is synchronous with the input:
output.SynchronousInputID = input.ID;
// Create the GID output column (16-character Unicode string):
IDTSOutputColumn90 outputColumn = output.OutputColumnCollection.New();
outputColumn.Name = "GID";
outputColumn.SetDataTypeProperties(Microsoft.SqlServer.Dts.Runtime.Wrapper.DataType.DT_WSTR, 16, 0, 0, 0);
}
///
/// Only 1 input and 1 output with 1 column is supported.
///
///
public override DTSValidationStatus Validate()
{
bool cancel = false;
DTSValidationStatus status = base.Validate();
if (status == DTSValidationStatus.VS_ISVALID)
{
// The input and output are created above and should be exactly as specified
// (unless someone manually edited the persisted XML):
if (ComponentMetaData.InputCollection.Count != 1)
{
this.ComponentMetaData.FireError(0, ComponentMetaData.Name,
"Invalid metadata: component accepts 1 Input.",
string.Empty, 0, out cancel);
status = DTSValidationStatus.VS_ISCORRUPT;
}
else if (ComponentMetaData.OutputCollection.Count != 1)
{
this.ComponentMetaData.FireError(0, ComponentMetaData.Name,
"Invalid metadata: component provides 1 Output.",
string.Empty, 0, out cancel);
status = DTSValidationStatus.VS_ISCORRUPT;
}
else if (ComponentMetaData.OutputCollection[0].OutputColumnCollection.Count != 1)
{
this.ComponentMetaData.FireError(0, ComponentMetaData.Name,
"Invalid metadata: component Output must be 1 column.",
string.Empty, 0, out cancel);
status = DTSValidationStatus.VS_ISCORRUPT;
}
// And the output column should be a Unicode string:
else if ((ComponentMetaData.OutputCollection[0].OutputColumnCollection[0].DataType != DataType.DT_WSTR) ||
(ComponentMetaData.OutputCollection[0].OutputColumnCollection[0].Length != 16))
{
ComponentMetaData.FireError(0, ComponentMetaData.Name,
"Invalid metadata: component Output column data type must be (DT_WSTR, 16).",
string.Empty, 0, out cancel);
status = DTSValidationStatus.VS_ISBROKEN;
}
}
return status;
}
///
/// Called before executing, to cache the buffer column indexes.
///
public override void PreExecute()
{
base.PreExecute();
// Get the index of each input column in the buffer:
IDTSInput90 input = ComponentMetaData.InputCollection[0];
inputColumnBufferIndex = new int[input.InputColumnCollection.Count];
for (int col = 0; col < input.InputColumnCollection.Count; col++)
{
inputColumnBufferIndex[col] = BufferManager.FindColumnByLineageID(input.Buffer, input.InputColumnCollection[col].LineageID);
}
// Get the index of the output column in the buffer:
IDTSOutput90 output = ComponentMetaData.OutputCollection[0];
outputColumnBufferIndex = BufferManager.FindColumnByLineageID(input.Buffer, output.OutputColumnCollection[0].LineageID);
// Get the GID web service:
gidService = new GID.WS_PDF.PDFProcessService();
}
///
/// Called to process the buffer:
/// Get a new GID and save it in the output column.
///
///
///
public override void ProcessInput(int inputID, PipelineBuffer buffer)
{
if (! buffer.EndOfRowset)
{
try
{
while (buffer.NextRow())
{
// Set the output column value to a new GID:
buffer.SetString(outputColumnBufferIndex, gidService.getGID());
}
}
catch (System.Exception ex)
{
bool cancel = false;
ComponentMetaData.FireError(0, ComponentMetaData.Name, ex.Message, string.Empty, 0, out cancel);
throw new Exception("Could not process input buffer.");
}
}
}
///
/// Called after executing, to clean up.
///
public override void PostExecute()
{
base.PostExecute();
// Resign from the GID service:
gidService = null;
}
}
}
The logic I am trying to recreate via SSIS is the following SQL statement:
insert into db3.dbo.targettable1 -- Target database table
(SiteC,
Objecte,
Attrib1)
select distinct ?,
?,
from ? -- Source database table
join dbo.targettable2 c1 -- Target database table
on c1.Alias = ? and
c1.CSetID = ? and
c1.FacID = (select f.PFacID
from dbo.Fac f
where f.FacID = ?)
where not exists (select * from dbo.targettable2 c -- Target database table
where c.Alias = ? and
c.FacID = ? and
c.CSetID = ?)
I have an OLE DB Source that consists of an expression to approximate the following portion of the Above Select statement:
Select ?,
from ? -- Source database table and
The package has 2 global variables User:CSetID and User::FacID whose scope is global to the package and whose values are set within a Foreach Loop Container outside of the Data Flow Task
I was trying to reference the 2 global variables within the Looup Transformation to recreate the following portion of the SQL statement.but encounter errors:
join dbo.targettable2 c1 -- Target database table
on c1.Alias = ? and
c1.CSetID = ? and
c1.FacID = (select f.PFacID
from dbo.Fac f
where f.FacID = ?)
In the Advanced Editor window of Lookup Transaction
select * from
(select * from [dbo].[targettable2 ]) as refTable
where [refTable].[Alias] = ? and [refTable].[FacID] = ? and
[refTable].[CSetID] = ?
Is there away to reference global variables in a Lookup Transformation that are set outside a Data Task Flow?
Hello,
I have developed some packages to load data into "Fact" tables in the data warehouse.
Some packages are OK, other ones not. What is the problem?: some packages load fact tables with lots of "Lookup - Data Flow Transformation" into the "data flow task" (lookup against dimension tables) but they are very very slow, too much slow to be choosen as a solution.
Do you have any other solutions to avoid using "Lookup - Data Flow Transformation"? Any other solution (SSIS, TSQL and so on....) is welcome to speed up the Fact table loading process.
Thank in advance
tell me the difference between Audit transformation and rowcount transformation.
Because audit and rowcount transformation will provide the environment variables.
Only difference i am finding is rowcount returns the count of rows its updating .
Apart from these is there any other difference?
Tell me the scenario where i need to use the audit transformation.
I just had this happen twice in a row. The data flow task is showing a number of records almost twice as high as the actual data that is going into the table. This happened to me in two different DFT's with different data.
I am using an OLEDB source which uses a query something like:
select * from functiona()
In the DataFlowTask I see it had around 400,000 Rows go through the path all the way to the deastionation..
However I know that isn't right. If I do:
select count(*) from functiona() I get 200000 rows. Now the weird thing is if I check the table that it inserted to, it has the right number of rows, 200,000. (Numbers are not exact).
Anyone else had this happen?
I have a data flow task that moves all the rows from 18 tables on a production server to a reporting services server. One table, which does not contain the most rows (about 650K rows) reports all the rows have been transferred. However, if I go in to the SQL Mgmt Studio and do a Select count(*) on the table, there are only 110k rows.
Has anyone else experienced this problem?
Thanks,
Nick Anzano
Hi,
I'm having trouble with a Script Component in a data flow task. I have code that does a SqlCommand.ExecuteReader() call that throws an 'Object reference not set to an instance of an object' error. Thing is, the SqlCommand.ExecuteReader() call is already inside a Try..Catch block. Essentially I have two questions regarding this error:
a) Why doesn't my Catch block catch the exception?
b) I've made sure that my SqlCommand object and the SqlConnection property that it uses are properly instantiated, and the query is correct. Any ideas on why it is throwing that exception?
Hope someone could help.
I need to know what a table's max row Identity is part way thru a data flow. I can't get it at the beginning of the data flow. I need to either (1) add it to the data buffer part way thru or (2) set it into a package variable and then reference the var in a script component.
I've not found a way to add a database column to the data buffer without doing a lookup for each row (too slow and not appropriate here) or some goofy oledb source and then merge join into the data buffer on a contrived join.
I've read questions about referencing package vars in scripts but I can't get that to work. DTS.Variables("varname").Value isn't recognised when I code it up.
Anyone have an idea or solution for either one of these? If you're gonna explain the script code, please include the entire snipet including the INCLUDEs, etc.
i have too many DTS packages to migrate to SSIS, and while examining a DTS package in BIDS (converted with the migration utility) i tried to edit the resulting migrated package, which opened the DTS interface with the two connection icons joined by the big fat arrow with a gear on it...not exactly what i had in mind, iow, it looks like SSIS on the outside, but its still DTS on the inside.
So I stripped out a series of components from a more complex package hoping that simplifying it would reveal the contents of old DTS Transformations tab at least partially set up in a Derived Column transformation.
Can i get there from here, or must i recreate every stinking definition in a derived column manually from the ground up?
thanks very much for your help
Hi,
Is there a way to accomplish one- many or many -one or many - many column mappings in the SSIS data flow task or using any other tasks. We were able to do this in DTS Transform data task. Also is it possible to edit the mapping like:
dest column1 = Right(dest column1, 3)
Thanks.
Dear All,
I have a table A with a KEY column and SSN column.
KEY = 12 digits ( first 3 digits are Department Id , and last 9 digits are SSN)
I have a table B with SSN column only.
both KEY and SSN columns are Primary keys so duplicate entries must be Avoided.
Table A is intended to be popluated weekly from TXT file (SSIS package RUN). I want to achieve somethign like this..!
P-Code sample:
for each Row in TXT file
if TXTfile.KEY = TableA.KEY then
skip and Read/Go to next Row in TXT file
else
INSERT TXTfile.KEY into TABLEA.KEY
SSN_Var = EXTRACT the SSN part (SSNpart.READ)
if SSN_VAR.Exists In TableB.AnyRow then
skip
else
Insert into TableB
End If.
End If
End For Loop.
-----------------------------------------------------------------
Using SSIS controls, what will be best flow and logic to achieve this.....?
any sample scripting code ????
Many Thanks.
I'll preface this by saying I'm pretty new to SSIS; I'm coming over from Coldfusion and don't have much DTS experience to draw from either. That said....
I've got a package that I run to migrate data from a bunch of older databases into a "flat" new schema. The new schema is not identical to the old, in other words, so it's not a simple mapping of existing columns. All the data flow tasks have finally gotten to a working state, with much trial-and-error. Now, suddenly one of the tasks is throwing this error:
"...Cannot insert the value NULL into column 'the_id', table 'the_table'; column does not allow nulls. INSERT fails."
The column is an identity column in the new table; it is NOT NULL as it is the primary key. I've triple-checked that identity is on. Basically it's generated anew each time this package is run. In the data flow task, mappings are set to ignore for this column; also, Keep identity and Keep nulls are on (although since this column is not in the source I can't see how this affects anything.)
(***For anyone wondering why in the heck I'd need this column at all, offhand I can't recall if later tasks use it or not...I'm actually wondering if it's even needed in this read-only table if it's not used as a foreign key somewhere else...however, I'd like to figure out this issue regardless... )
I've had a hard time finding anyone with the same problem out there...usually people with NULL issues simply are trying to insert into a NOT NULL column. The big difference here is that the column is identity.
Thanks,
Rick
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
Has anyone done this? I can't find anything in the documentation
that describes this. The closest I get is to the InnerObject property
of the TaskHost class. There is an example of programming a bulk
insert task. But I can't find anything on programmatically setting
the column mappings (source to dest) of a simple data flow task. Any
help is appreciated!
Hi,
I'm having my first go at developing a destination adapter which will send data to an update Web Service.
I've got some rather big gaps in my understanding. I've been following the various samples I've found on the net and have validated my mapping and picked up all the available column names and datatypes which are appearing in the Input and Output Properties tab of the Advanced Editor but I only have a tab for "Input Columns" and not "Column Mappings".
Which method defines the availble columns for the user to map?
Let me know if I haven't given enough information.
cheers
Hello,
Is it possible to use existing data flow components (Merge Join, aggregation,...) in a custom data flow component?
Thanks,
Yoann
Hi:
In the derived column transformation editor, I have a Derived column name called FileGroupID. I would like to pass in a value for this column from a variable that I have set earlier in the scope. Can someone let me know, how to write the expression that does that and where do I specifiy that expression. I am thinking its the expression field in the derived column transformation editor. My main question is how to actually write the expression, what is the syntax to pull the variable value? Thanks.
MA2005
There is "Row Count" transformation in SSIS.
It can count the number of records. But how can I get the output from the row count?
Can I insert the number of row count into a table in SSIS?
Thanks for help!
Mike
Hi all,
i'm using Row Count Transformation downloaded from http://www.sqlis.com/93.aspx to generate surrogate key.
in my data flow, i have OLE Data Source connected to Row Count Transformation connected to SCD.
i've configured ok and the package ran without error.
my problem is my surrogate key column won't generate the next increment number if i run the package the 2nd time and there is new row in the dimension, e.g.
Id BusinessKey BusinessName
--- ------------------ ---------------------
1 RDO Radio
2 MAG Magazine
3 TV Television
1 INT Internet } added new row from source
did i miss something? please help. thanks.
I have a data flow that consists of
OLE DB source which calls a stored proc that returns a result set
data conversion
Excel destination
I am in design mode in Business Intelligence studio. My excel destination (with an Excel Connection) shows no sheet name though I have an execute SQL task before the data flow to create the excel table called SHEET1. Needless to say, there are no output columns visible to do any mappings. I did go to the ExcelConnection to set the OpenRowset Property to SHEET1 but it seems to have no effect.
I can do the export in SQL Server Management studio and that works fine, but it is basic and does not meet my requirements. I have to customize the package to allow dynamic Excel filenames based on account names and have to split my result set into multiple excel sheets because excel 2003 has a max of 65536 rows per sheet. Also when I use the export wizard, I have the source as a table and eventually the source has to be a stored proc with input parms.
What am I missing or doing wrong? Thanks in advance
Hi, All,
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
Thanks in Advance
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Thanks,
Steve
Dear All!
My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database.
Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any
Thanks
Hi everyone,
Primary platform is 64 bit cluster.
How to move information allocated in SSIS variables from Data Flow to Control Flow layers??
We've got a SSIS package which load a value into a variable inside a Data Flow. Going back to Control Flow how could we retrive that value again????
Thanks in advance and regards,