Data Loss With Merge Replication?
Jun 27, 2006
We had merge replication setup between 2 tables, Table A and Table B using SQL 2000. This was working 100%. The users asked to disable updated/deletes to both these tables if data existed on 2 other tables. Table AA and Table BB. We implemented it as follows:
1) Created Insert/Update/Delete triggers for Table A & B. It basically check for Table A is there a record in Table AA, if it exists, raise an error and don€™t commit.
2) Removed all foreign constraints from Table AA and BB
3) Added Table AA and BB to the current replication.
Then all hell broke loose, we got conflicts all other the place saying that Table AA cannot be updated because records does not exist in Table X. To our surprise we found triggers generated by Erwin in 1998 €“ that check for €śforeign contsraints€? and removed them immediately.
We continued to get conflicts but could see from the error messages it was generated by the triggers in point 1. We added the NOT FOR REPLICATION clause and everything has been running smoothly or so we thought€¦..
After 2 months we got a call that data is missing. It€™s random data and the only explanation I have is that replication caused that. My biggest reason for saying this is tracking the application audit trail I€™ve found that all the data missing was added during the period we had all the conflicts.
I need a solid explanation for this and can anyone confirm that this is possible?
View 4 Replies
ADVERTISEMENT
Dec 6, 2006
hi,
Im using merge replication.I have created one publisher with dynamic filtering and i have creted two subscribers from it(pull subscription).It was working fine.but after sysnchronizing 2-3 times data from some tables went missing
can any one help me....
thanks and regards
Dhanya
View 3 Replies
View Related
Apr 11, 2007
We have setup transactional replication across several databases using SQL Server 2000 spread across multiple sites in a fully connected network. There is one main table from which data is replicated from the publisher to the destination. Horizontal filtering is being used on this table to enable sending/routing of the records to the correct DB(site). It has been observed that the documents/records are getting lost between some sites. Say 10 documents are being sent fron the publishing database but only 5 are being received at the destination database although the sent history for all the 10 documents is available at the publishing database.
Can anyone guide on how to analyse and resolve this problem? Can unreliable network be the issue, If the network is not reliable and the connection is lost during replication how does replication ensure that no data is lost?
View 1 Replies
View Related
Mar 28, 2008
thanks 4 ur rpl..well i have a simple doubt if u can guide me it will b gr8 help..well i am developing an application of location based services, in which i am going to store my data on SQLserver 2005 and will fetch the data from it when the user logs in to the user's PDA device so that a user can work offline on the data when there is no connection and when he gets the connection he can synchronize the data with SQLserver 2005. so now i m confuse whether i should use the merge replication or ado.net synchronization framework or RDA?what is the difference between merge replication and synchronization and which is better?
View 1 Replies
View Related
Jan 4, 2007
Dear ppl,
I have a question for you. One of our client has asked us how is the data secured over the air during Replication?
I have read that Merge Replication uses TLS (Transport Layer Security) protocol to secure the data over the air. But I was wondering if it is all done automatically ? Or do we need to install certificates like for SSL.
We have a Windows Mobile 5.0 application using SQL Mobile that runs over 50 devices and they all synchronise with a single Publisher SQL Server 2005 using GPRS connection. We haven't got any SSL certificates installed on the server.
Now how can i make use of TLS in my application to secure my data over the air (using TLS)?
Regards
Nabeel Farid
View 5 Replies
View Related
Apr 1, 2008
I am designing a mobile application.I am having database in sql server 2005 and i want to synchronize this database with sql server ce database on pda.I am using merge replication method for synchronization.Please give step by step procedure for data synchronization using merge replication between sql server 2005 and sql server ce 2.0,also let me know whether sql server enterprise manager is needed or will it work without it,if needed give me the link from where to download it as it is not available in sql server 2005.
Reply soon.
Thanks in advance.
View 1 Replies
View Related
Feb 9, 2007
Hi gang,
We have a database that's using merge replication between two servers, and we need to insert a lot (about 1GB) of data into it.
The servers, however, are separated by a 192k WAN connection, so it's impractical to rely on the merge replication to send the data across to the subscriber.
Is there a way to insert the data at both ends? I can get the data out there on a DVD or a laptop easily enough. Can I load the data into both copies of the database and tell the merge agent that it's not to be replicated?
Thanks,
Matt
View 3 Replies
View Related
May 3, 2007
Hello,
When I reinitialized a subscription from SQL2005 db (publisher) to a SQL 2000 DB (Subscriber) and had the Upload changes before reinitialization turned on, the data from the SQL 2000 db didn't get uploaded. This resulted in a loss of 2 days worth of data.
Does anyone have any idea if there's anywhere that data is kept. (unfortunately a series of errors caused our backups to not be running on the 2000 db either).
Thank You
Bob
View 6 Replies
View Related
Oct 16, 2006
I'm having an error with merge replication my suscriber are downloading old data, all this start happen after I install SP4.
let explaint this with more details ,
if a made an update to a row in a table from the publisher , the agent history show that 1 change have downloaded to the suscriber, a put an audit in the suscriber and yes one update was downloaded but the row still the same, look like the suscriber downloaded old data instead of the curent change that i made.
If i delete the row, the rows gets delete at the suscriber, if a insert the row the row get insterted ok.
The problem only happen with rows inserted at the suscriber, that later on get update at the publisher. My suscriber has MSDE 2000 SP3 an my Server has SQL Enterprice 2000 SP4.
Any help would be apreciate. thxs.
View 13 Replies
View Related
Apr 24, 2007
Hi,
We have configured one-way merge replication in our topology. That is data flows from Subscriber to Publisher only. We have a publisher and a subscriber. There are 3 publications in this category and each publication has a subscription. We use SQL Server 2005 SP1 in both the servers. The retention period is the 14 days (default). After this period, I get the following error in the subscription in Replication Monitor. The Error message is
Error messages:
The Merge Agent failed after detecting that retention-based metadata cleanup has deleted metadata at the Publisher for changes not yet sent to the Subscriber. You must reinitialize the subscription (without upload). (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199402)
I read the post http://forums.microsoft.com/MSDN/ShowPost.aspxPostID=372790&SiteID=1
which said that this error might be solved in the SP2. We have not yet applied SP2, but even after applying SP2, will this error be solved for One Way Merge Replication since the data from publisher will not go to the subscriber always in this type of topology??.
Kindly get back to us regarding this as soon as possible. Thanks in advance.
Regards,
Swapna.B.
View 3 Replies
View Related
Jan 25, 2007
Hi all.
I 'm trying to set up merge replication between two servers that have the same schema databases. The two database have the majority of there data the same but as well as data inserted at a later time independently on the two servers. (The two servers were connected in a merge replication scheme that failed at some later time and replication was paused, but users continout to insert data indepentedly at the two servers.)
I need to get them up and running.
I cleaned replication at both servers, I recreated the publication at the puplisher distributor and all is fine.
When I create a push subscription to the subscriper I get the error invalid column name 'rowguidcol' .
I so far managed to have merge replication running on two identical databases (schema and data).
Just some thoughts. After some reading I found that it might be related to identities and identity range or indexes. I set the identity seed and increment at 2, 2 at publisher and at 1,2 at subscriper. (On the same tables at puplisher and subscriber.) Is that ok? is that the way to do it?
Digging a bit more Using the SQL Profiler I can locate the error to happen when sp_MSaddmergetriggers executes.
Thanks allot for any help
Version.
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Standard Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
View 5 Replies
View Related
Jan 25, 2008
I've got a problem:
I want to transfer data between an sql server 2005 and my pocket pc. So i've installed a sql server CE on it.
I know that i can use the merge replication but, i don't have any IIS. So, i've got to transmit data though email that have got a file attached. I Know how to email from sql server 2005. When the pocket receive that email, i don't know how to insert the data in sql ce from outlook compact. Doi have tu use SSIS , in that case how can i run the package?
thanks
View 4 Replies
View Related
Jun 29, 2015
I have the merge replication (Push)Â for SQL Server 2008.The right-click option for Start and Stop Synchronizing in subscriptions has been disabled. How can I stop the merge replication and start again ?
This error happened 1 week after I created the merge replication. The merge data cannot sync to subscriber and only solution I can use is drop and re-create the merge replication again but error would be re-occur a week later. The merge replication work fine before and start from middle on May 2015, but it keep happen right now.
View 8 Replies
View Related
Apr 19, 2008
Hi all,
there are 2 datagrids i have taken,
1st for displaying data before inserting the value into table
2nd for displaying data after inserting the value into table
just see the screeenshot which i have taken
actually the problem is, we are not getting any type of errors even though I have try/catch blocks.
I have colored that particular statement in RED color, where it is getting stuck, while executing, if we sit 40-45 minutes then also the execution pointer is not going on next step.
please look into this, and if u have any idea/person by which/whom we can solve this then please tell us.......
-chaukse rahul
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Reflection;
using System.Data.SqlServerCe;
using System.Data.Common;
namespace ProjectSQLMobile2
{
public partial class Form1 : Form
{
private DataSet dsMemberList;
public Form1()
{
InitializeComponent();
}
private void Form1_Load(object sender, EventArgs e)
{
Sync();
}
private void Sync()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl = @"http://169.254.25.129/WebSQLMobile/sqlcesa30.dll";
repl.Publisher = @"RAHU";
repl.PublisherDatabase = @"SQLMobile";
repl.PublisherSecurityMode = SecurityType.DBAuthentication;
repl.PublisherLogin = @"sa";
repl.PublisherPassword = @"sa12345";
repl.Publication = @"PubSQLMobile";
repl.Subscriber = @"SubSQLMobile";
repl.SubscriberConnectionString = @"Data Source=TestLast.sdf;Max Database Size=128;Default Lock Escalation =100;";
try
{
if (!System.IO.File.Exists(@"TestLast.sdf"))
{
repl.AddSubscription(AddOption.CreateDatabase);
}
repl.Synchronize();
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
repl.Dispose();
}
/*
*
* To Display Data Into DataGrid1 Before Insert
*
*/
SqlCeConnection cn = new SqlCeConnection(@"Data Source=TestLast.sdf");
SqlCeDataAdapter daMemberList = new SqlCeDataAdapter("SELECT MemberID, MemberName FROM MembershipData", cn);
if (dsMemberList == null)
{
dsMemberList = new DataSet();
}
try
{
dsMemberList.Clear();
daMemberList.Fill(dsMemberList, "MembershipData");
dataGrid1.DataSource = dsMemberList.Tables["MembershipData"];
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
}
private void Merge()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl = @"http://169.254.25.129/WebSQLMobile/sqlcesa30.dll";
repl.Publisher = @"RAHU";
repl.PublisherDatabase = @"SQLMobile";
repl.PublisherSecurityMode = SecurityType.DBAuthentication;
repl.PublisherLogin = @"sa";
repl.PublisherPassword = @"sa12345";
repl.Publication = @"PubSQLMobile";
repl.Subscriber = @"SubSQLMobile";
repl.SubscriberConnectionString = @"Data Source=TestLast.sdf;Max Database Size=128;Default Lock Escalation =100;";
try
{
if (!System.IO.File.Exists(@"TestLast.sdf"))
{
repl.AddSubscription(AddOption.CreateDatabase);
}
repl.Synchronize();
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
repl.Dispose();
}
/*
*
* To Display Data Into DataGrid2 After Insert
*
*/
SqlCeConnection cn = new SqlCeConnection(@"Data Source=TestLast.sdf");
SqlCeDataAdapter daMemberList = new SqlCeDataAdapter("SELECT MemberID, MemberName FROM MembershipData", cn);
if (dsMemberList == null)
{
dsMemberList = new DataSet();
}
try
{
dsMemberList.Clear();
daMemberList.Fill(dsMemberList, "MembershipData");
dataGrid2.DataSource = dsMemberList.Tables["MembershipData"];
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
}
private void DisplaySQLCEErrors(SqlCeException ex)
{
for (int i = 0; i < ex.Errors.Count; i++)
{
MessageBox.Show("Index #" + i.ToString() + ""
+ ex.Errors.Source + ""
+ "Error: " + ex.Errors.Message,
"Error No. " + ex.Errors.NativeError.ToString());
}
}
private void buttonInsertData_Click(object sender, EventArgs e)
{
//add directly into ce database sample:
SqlCeConnection cn = new SqlCeConnection(@"Data Source=""TestLast.sdf""");
string SQL = "INSERT INTO MembershipData(MemberName) VALUES('" + textBox1.Text + "')";
cn.Open();
SqlCeCommand cmd = new SqlCeCommand(SQL, cn);
cmd.CommandType = CommandType.Text;
try
{
/*
* This statement is taking too much time to be executed * what should we do??????? */ cmd.ExecuteNonQuery(); }
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
cn.Close();
}
Merge();
}
}
}
please help,
ur help will be appriciates
NOTE:- I am getting output in 1st datagrid, but in 2nd dtagrid there is no output
View 1 Replies
View Related
Nov 22, 2006
This is just too simple. I must be doing something wrong. I have tried everything, redoing the SQLMobile merge publication, setting permissions, and need help ASAP.
The basic test with the http://localhost/sqlmobile/sqlcesa30.dll returns the message:
SQL Server Mobile Server Agent 3.0
I have tried the merge replication with both my local SQL Server 2005 installation and a remote development box. Both instances return the same error.
I am able create and replicate a database using the sample application:
http://msdn2.microsoft.com/en-us/library/ms171908.aspx
However, another simple applications fails to synchronize when simply using the following code block:
Dim repl As New SqlCeReplication()
repl.InternetUrl = "http://xens/sqlmobile/sqlcesa30.dll"
repl.Publisher = "xena"
repl.PublisherDatabase = "SQLMobile"
repl.PublisherSecurityMode = SecurityType.NTAuthentication
repl.Publication = "SQLMobile"
repl.Subscriber = "sqlmobile"
repl.SubscriberConnectionString = _
"Data Source='" + filename + "';Password='';" _
& "Max Database Size='128';Default Lock Escalation ='100';"
repl.AddSubscription(AddOption.CreateDatabase)
repl.Synchronize()
Here is the error message:
Error Code: 80072EE7
Message: A request to send data to the computer running IIS has failed. For more information, see HRESULT.
Minor Err. 28037
Source Microsoft SQL Server 2005 Mobile Edition
--------------------------------------------------------------------------------------
Here is the full code sample:
Imports System.Data.SqlServerCe
Imports System.Text
Public Class Form1
Private engine As SqlCeEngine
Private repl As New SqlCeReplication()
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
engine = New SqlCeEngine()
engine.LocalConnectionString = "Data Source=""sqlmobile.sdf"";Max Database Size=128;Default Lock Escalation =100;"
engine.CreateDatabase() <- First method creates database
engine.Dispose()
engine = Nothing
repl.InternetUrl = "http://xena/sqlmobile/sqlcesa30.dll"
repl.Publisher = "xenaSQL2005"
repl.PublisherDatabase = "SQLMobile"
repl.PublisherSecurityMode = SecurityType.NTAuthentication
repl.Publication = "SQLMobile"
repl.Subscriber = "SQLMobile"
repl.SubscriberConnectionString = "Data Source=""sqlmobile.sdf"";Max Database Size=128;Default Lock Escalation =100;"
Try
'repl.AddSubscription(AddOption.CreateDatabase) <- this method fails also
repl.AddSubscription(AddOption.ExistingDatabase)
repl.Synchronize() <-- Code fails here with the error message shown.
Catch err As SqlCeException
ShowErrors(err)
'MessageBox.Show(err.ToString)
End Try
End Sub
Public Sub ShowErrors(ByVal e As SqlCeException)
Dim errorCollection As SqlCeErrorCollection = e.Errors
Dim bld As New StringBuilder
Dim inner As Exception = e.InnerException
Dim err As SqlCeError
If Not inner Is Nothing Then
MessageBox.Show(("Inner exception: " & inner.ToString()))
End If
' Enumerate each error to a message box.
For Each err In errorCollection
bld.Append((ControlChars.Cr & " Error Code: " & err.HResult.ToString("X")))
bld.Append((ControlChars.Cr & " Message : " & err.Message))
bld.Append((ControlChars.Cr & " Minor Err.: " & err.NativeError))
bld.Append((ControlChars.Cr & " Source : " & err.Source))
' Retrieve the error parameter numbers for each error.
Dim numPar As Integer
For Each numPar In err.NumericErrorParameters
If 0 <> numPar Then
bld.Append((ControlChars.Cr & " Num. Par. : " & numPar))
End If
Next numPar
' Retrieve the error parameters for each error.
Dim errPar As String
For Each errPar In err.ErrorParameters
If [String].Empty <> errPar Then
bld.Append((ControlChars.Cr & " Err. Par. : " & errPar))
End If
Next errPar
MessageBox.Show(bld.ToString())
bld.Remove(0, bld.Length)
Next err
End Sub
End Class
Thanks in advance....
View 4 Replies
View Related
Mar 9, 2007
How to speedup data from subscriber to Publisher on Merge replication?
Is there any we can speed up data from Subscriber to Publisher (uploading).
Subscriber downloading data from publisher running more than 20 hours after drop and recreate subscriber.
Could you please post reply.
Regards
Ponnu
View 2 Replies
View Related
Jul 7, 2004
Hi
I am new to Sql server and had just finished the MErge Replication setup on one of the PRoduction server. Today I got the request to change one of the Datatype of one the Published Article. Please help as what are the correct step to make it happen. Is there any production downtime required and if yes , then how much.
Thanks in Advance
Sanjay
View 1 Replies
View Related
Aug 12, 2015
How to resolve the data inconsistent errors in merge replication ?
View 0 Replies
View Related
Apr 3, 2007
Hello,
If I want to access or modify my local subscription data(not the configuration) how can I do that(from sql server 2005 or from asp.net)? Also can i update directly to the local subscriptions data or do I need another layer which will update from a table for example??
Thank you
Salah
View 3 Replies
View Related
Aug 3, 2006
Hello
I have an odd problem that is driving me nutz. I have a very simple SSIS package that imports a 5 colum flatfile into a sql Server 2005 Table.
When I created this package with the wizzard, it will execute perfectly fine and processes all rows into the destination table.
But when I hit F5 to execute it manually it will fail before inserting a single row.
The error it generates is (Spalte 5 is a Datetime in the format DD.MM.YYYY) :
Error: 0xC02020A1 at Datenflusstask, Source - Daten_NC_1_txt [1]: Data conversion failed. The data conversion for column "Spalte 5" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Datenflusstask, Source - Daten_NC_1_txt [1]: The "output column "Spalte 5" (25)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Spalte 5" (25)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Datenflusstask, Source - Daten_NC_1_txt [1]: An error occurred while processing file "C:WorkDaten_NC_1.txt" on data row 177.
Edit: Modified the Title so it properly reflects the Problem & the Solution
View 3 Replies
View Related
Jul 20, 2005
Hi,I have a big problem with a database in MS SQL SERVER 2000.the rows into the some tables, for the second time, have been mixed betweenthey without appearing reason.the application that uses the db is totally TRANSACTIONAL and they do notexist query that they do not have clause WHERE.The database is on a computer with NAS architecture.I have this problem for the first time in 5 years of use of MS SQL SERVERCan someone help me?TIA
View 2 Replies
View Related
Aug 29, 2007
Hi,
I am getting this error when my ssis package is running
Data Conversion failed due to Potential Loss of data
the input column is in string format and output is in sql server bigint
the error is occuring when there is an empty string in the input. what should i do to overcome this
It is an ID field and should i convert to bigint or should i leave it as char datatype is it i a good solution or is there a way to over come this.
View 4 Replies
View Related
Jun 13, 2008
I am using SQL Server 2005.
I am trying to import data from CSV files into an SQL Server table using the Import wizard. The text qualifier is double quotes ("), column delimeter is a comma (,), first row has column names. One of the field name is "id", which is a GUID, whose datatype in SQL Server is uniqueidentifier. It looks like this in the file:
..."data","data","dbf7edf8-0ca8-4e53-91e3-5901cdc1819a","data"...
As you can see, there are no enclosing curly braces for the guid value. The DTS chokes on this and throws this error:
The value could not be converted because of a potential loss of data
If I add curly braces like this {dbf7edf8-0ca8-4e53-91e3-5901cdc1819a}, it imports with no problem.
Is there way to import this type of data, because there is no way I can edit these files, and I would prefer not changing the datatype of the id field?
Or is this a limitation of SQL Server?
Thanks,Bullpit
View 5 Replies
View Related
Jul 23, 2005
Hi All,I'm trying to track down a mysterious problem we're experiencing inwhich updates and inserts to tables in our mssql2k server appear to be'disappearing.'To explain our situation:We have a web page (written in ASP, if that's relevant) on which weaccept enrollment information.When that page is submitted, the form data is passed to a storedprocedure on our mssql2k server, which performs several operations,all of which are wrapped in a transaction.In particular, the stored procedure performs an update operation on arecord in one table (i'll call it TableA) and an insert into anothertable (TableB).If the procedure encounters a problem (ie after each update / insertoperation in the procedure we test for IF @@Error<>0) it performs arollback, performs a select similar to the one immediately below, andthen RETURNs.SELECT '1' as error, 'Unable to update TableA' as errormsgIf the procedure doesn't fail any of the @@Error tests, thetransaction is committed, and a membership number is SELECTed to bereturned.SELECT '0' as error, @memnum as membershipnumberThe @memnum variable is populated within the transaction.Back in the ASP page we test both for the proc returning an emptyrecordset, or for it passing an explicit value in the error field, andpush the page to an error page if either of these conditions are met.If, on the other hand, none of these conditions are met, and themembershipnumber field in the recordset is populated with a validmembership number, we push to a confirmation page.This confirmation page receives the membership number in a sessionvariable, performs a SELECT against TableB (the table that receivedthe insert during the proc) using that membership number in the WHEREclause, and the resultant recordset is used to populate theconfirmation details on that page. That recordset is also then used topopulate the details of a confirmation email, which is automaticallysent by the confirmation page.And now here's our problem: we've become aware of a handfull of peoplewho have gone through the enrollment process, have received theconfirmation email containing the information they supplied asexpected, but the data appears to be entirely missing from our tables.By that I mean that the record in TableA does not appear to have beenupdated (under normal circumstances that record should have hadseveral flags set, and several other fields updated with informationsupplied by the person enrolling), and the record in TableB does notappear to have been inserted.In essence, looking at our tables, it *feels* like the transaction inthe stored procedure for that particular enrollment hit a problem andwas rolled back. However, the evidence that we have in the form of theconfirmation email argues strongly that the data must have existed inour tables (particularly in TableB), if only for an unknown period oftime.We're kind of at our wit's end to work out what is going wrong withthese enrollments. From my understanding of transactions (and I couldwell be wrong) any changes to data (ie updates, inserts etc) containedwithin are essentially 'invisible' to any other operation (ie theSELECT that happens in the confirmation page) until the transaction iscommitted, implying that the effect of the update and insert shouldhave been 'permanently' successful if no error code is received and ifa valid membership number was returned. I ask, because someone in ourteam has suggested that maybe the operations in the transaction'lasted long enough' in the tables to have been visible for the SELECTon the confirmation page to have worked, but were then subsequentlyrolled back, explaining why the confirmation email is appropriatelypopulated and why the data then appears to be missing. However, as Isaid, this doesn't match my understanding of how transactions behave.Sorry for the length of this post, but I felt it was best to explainthis as best as I could.Does anyone have any advice they can give us on this situation? ie,are there any known problems with operations in transactions 'bleedingover' into tables, but then being rolled back at some later point?Does anyone have any thoughts or suggestions on how we can furtherdiagnose this issue?Truly, any help will be immensely appreciated...Thanks in advance,M Wells
View 2 Replies
View Related
May 17, 2007
I have a FoxPro dbf that includes From Milepost (f_mp) and To Milepost (t_mp) fields. These fields contain values between -1 and 9999.9999.
I don't have FoxPro installed, but when I attach the dbf to Access, I see the fields defined as datatype Double.
I have a SQL table that I'm trying to import the dbf data into. In that table the two fields are defined as datatype Real.
When I execute the task, it fails at the first milepost value with 4 digits to the left of the decimal point.
I read up on datatypes, then redefined the milepost fields as Floats, but nothing changed.
Any ideas or suggestions would be greatly appreciated.
ginnyk
View 3 Replies
View Related
May 30, 2006
During import from CSV i am getting following error "The value could not be converted because of a potential loss of data". My CSV file contains a column "years" and i have selected datatime in the import wizar. Can I scape from this error and import all my data.
Waqar
View 1 Replies
View Related
Aug 22, 2007
we had setup merge replication on 2 db servers. For some reason, the subscription started failing a month back with the error " invalid object sysmergexxxx on the subscriber. I did a reinitialize and now all the changes on the subscriber which werent synced got deleted. I have tried all 3 log recovery tools with no luck. Is there any hope of recovering data. the last backup on the subscriber was a month ago.
View 1 Replies
View Related
Jan 29, 2008
I've searched the threads and didn't see anything which seemed to fit this specific issue....
I have a Data Flow task which reads from an OLE DB Source (SQL Server 2005), uses a Data Conversion transformation to convert some field values, and finally outputs the result to distinct tabs of an Excel workbook. The task is failing with the following error:
There was an error with input column "oBBCompanyName" (2162) on input "Excel Destination Input" (57). The column status returned was: "The value could not be converted because of a potential loss of data.".
Using the Advanced Editor for the Excel Destination component, I examined the datatype of oBBCompanyName (ID = 2162) in the Input Columns list of the "Excel Destination Input" (identified with ID = 57). The Data Type is defined as DT_WSTR with Length = 255. The ExternalMetaDataColumnID = 203.
Also in the Advanced Editor for the Excel Destination, I examined the datatype of BBCompanyName (ID = 203) in the Extranl Columns list of the Excel Destination Input. The Data Type is defined as "Unicode String [DT_WSTR] with Length = 255.
What could I be overlooking that might be the root cause of this issue? The same error is occurring for different Excel Destination tasks in the data flow.
Kind regards,
Orlanzo
View 4 Replies
View Related
Jun 19, 2007
Hi,
I am getting the error below in my Flat File Source.
I've seen this error many times before, and have successfully resolved this problem in the past.
However, this time it's a little different. It's complaining about row 7 of myFile.csv, column 20. I have column 20 defined as a Numeric(18,6). It also maps to the Price field in the table, which is also a Numeric(18,6).
The problem is, on row 7 of myFile, column 20 is blank. That is, there's no data for row 7, column 20.
So, why should it care about this?? If it's blank, then how can you lose any data?? I have several other blank columns in this file, but they aren't throwing any errors. Just this one.
Thanks
Errors:
[Flat File Source - myFile [1]] Error: Data conversion failed. The data conversion for column "Column 20" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Flat File Source - myFile [1]] Error: The "output column "Price" (333)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Price" (333)" specifies failure on error. An error occurred on the specified object of the specified component.
[Flat File Source - myFile [1]] Error: An error occurred while processing file "d:myDirmyFile.CSV" on data row 7.
View 21 Replies
View Related
Oct 4, 2007
Hi,
I am transferring data from SQL Server 2005 to SQLAnywhere 9. Dates and numbers are sucessfully transferred but chars and varchars are not coppied. Though there are values in SQL Server 2005 table they are shown as blank on SQL anywhere. I cannot undestand data loss
Is this a code page problem or data size? for example a varchar 20 data type is in both sql server and sql anywhere Sybase. SQL server is in 1252 and sql anywhere 1253
Thanks.
View 6 Replies
View Related
Dec 6, 2007
Hi
I am having a bit of a difficult trying to understand this one. I had imported two tables around 2-300 rows each ran this in 64 bit scheduled it and it ran okay. I now introduced a 3rd table which if I change the true64bit to false it will run however if left true it keeps mentioning the output column of descr with a loss of data.
I did move it to 32bit and then ran the package it comes up as below. If I rememeber I can run this in 32bit mode which I'm sure will work hmm maybe!! but what I can't understand is why it works for two tables? is it something to do with the translation of the table or do I need alter the select statement?
Currently it is a select *
Executed as user: jvertdochertyr. ...on 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:30:11 PM Error: 2007-12-06 22:30:21.02 Code: 0xC020901C Source: st_stock st-stock out [1] Description: There was an error with output column "descr" (56) on output "OLE DB Source Output" (11). The column status returned was: "The value could not be converted because of a potential loss of data.". End Error Error: 2007-12-06 22:30:21.02 Code: 0xC0209029 Source: st_stock st-stock out [1] Description: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "descr" (56)" failed because error code 0xC0209072 occurred, and the error row disposition on "output column "descr" (56)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure. End Error Erro... The package execution fa... The step failed.
View 14 Replies
View Related
May 26, 2015
What is the main difference between snapshot and transactional and merge replication?
View 5 Replies
View Related
Mar 26, 1999
We wanted to rebuild our main SQL server machine. How can we backup everything about the SQL server (such as all databases/objects and settings on security and users) and then recover them without any data loss?
A related question is how to recover the server machine in case of system failure or whole machine crash down?
Thanks!
View 1 Replies
View Related
