Data Mining :: Content In Data Mining Structure Not Valid - Deployment Fails
Apr 30, 2015
I'm a beginner with SQL 2012 SSDT & SSMS. I get this error message when I try to deploy my project:Â
"Error 6
Error (Data mining): KEY SEQUENCE columns are not supported at the case level. The 'Customer Key' column of the 'TK448 Ch09 Cube Clustering' mining structure contains content that is not valid.
0 0
"
I am finding it hard to locate the content that is not valid. I've been trying to find a answer for this problem but can't seem to find anything. How can I locate the content that is not valid and change or delete it so that I can deploy this solution?
View 2 Replies
ADVERTISEMENT
May 31, 2006
Hoping someone will have a solution for this error
Errors in the metadata manager. The data type of the '~CaseDetail ~MG-Fact Voic~6' measure must be the same as its source data type. This is because the aggregate function is not set to count or distinct count.
Is the problem due to the data type of the column used in the mining structure is Long, and the underlying field in the cube has a type of BigInt,or am I barking up the wrong tree?
View 16 Replies
View Related
Oct 25, 2007
Hi all,
I am using Microsoft_Time_Series and have set HISTORIC_MODEL_GAP to various values (from 1 to 21). I always get this error:
Error (Data mining): The 'HISTORIC_MODEL_GAP' data mining parameter is not valid for the 'My Time Series' model.
In Algorithm Parameters window, this parameters is not there by default, so I have to add it.
Any tip will be greatly appreciated.
View 3 Replies
View Related
Jul 18, 2006
I perform data mining on all products and a specific product category.
Do I need to create 2 data source views, one for all products and the other one for the specific product category?
Afterward, I run the Data Mining Wizard 2 times to create 2 mining structures.
I also need to add the same mining model (e.g. Bayes, Cluster) to each of these mining structures.
Is there any simple way to do it?
Thanks.
Joe.
View 3 Replies
View Related
Apr 26, 2006
Hi, all here,
I am wondering where can I store my mining results in data mining engine? For example, I got mining results like accuracy chart, decision trees, and other formats of results based on different mining algorithms I used for my data mining, so where can I actually store the results for reporting service use later? Is it possible to do that in SQL Server 2005?
Thanks a lot for any help and guidance in advance.
View 4 Replies
View Related
Sep 29, 2015
I followed the tutorial posted at [URL] ...
Everything was ok until the last step where I had to process the mining structure which resulted in a warning
"Informational (Data mining): Decision Trees found no splits for model, Tbl Decision Tree Example."
What does this error mean? How do I resolve it? Also, I only see the first level in the Mining Model Viewer, I don't see the levels 2 and 3.
View 2 Replies
View Related
Feb 23, 2007
Hi, all experts here,
I would like to know if there is any way to migrate third-party data mining packages with SQL Server 2005 data mining algorithms together then we can have a comparison among all of them to get the best results for training models.
I am looking forward to hearing from you.
Thanks a lot.
With best regards,
Yours sincerely,
View 1 Replies
View Related
Jun 4, 2015
Having successfully created :
- a data mining structure with about 80 columns.
- a data mining model using Microsoft_Decision_Trees with 2 prediction columns.Â
I thought I would then explore the possibility of have more than 2 prediction columns, in this case 20.
I get an error message and I can't work out :
a) if this is because there's a limit to the maximum number of prediction columns and where that maximum is stated.
b) if something else has become corrupted
c) there's a know bug and if the error message is either meaningful or not.
Either way, I'm unable to complete the data mining wizardÂ
The error message is :Errors in the metadata manager. Either the mining structure with the ID of '[my model Structure]' does not exist in the database with the ID of 'DMAddinsDB', or the user does not have permissions to access the object.
View 3 Replies
View Related
Jun 15, 2015
Implementing data mining Add-in in an academic setting? We need to handle over 150 new students a semester and have their connection to Analysis Services survive for their four years at the college. We are introducing data mining to every freshman business student as a unit within their Intro to Excel class (close to a month of work to give them a sense of what is possible). Other courses later in their curriculum will expand on that introduction.Â
Once implemented, we would have as many as 900 connections to manage (four years from now). It is possible that multiple sections will be running at the same time, so 40 students may be accessing the data mining tools concurrently. Â
Is there a way to "bulk establish" the access credentials and establish those databases?
View 4 Replies
View Related
Jan 11, 2007
Good afternoon,
I'm doing a custom clustering plugin for text to pre-process ("clean" the texts), calculate weights, estimate the number of clusters (using the PBM index) and finally, do the actual clustering.
So... I've made each of these modules on C++ and I'm putting them all togheter on the plugin.
My database (MDB file) has only one table, with only two fields within: a key (auto-incremental) and a small text. What I intend to do is to get the text in each test case, store them togheter somewhere and call my classes to cluster these texts.
I'm trying to log the texts in a file (just a test) on the ProcessCase method, in the CaseProcessor class. I've did it with no problems with numerical data.
But when I load the MDB file on the Mining Structures Wizard, it says the content type of the field holding the texts is "Continous" and the data type is "Text". Actually, when I saw it I didn't really mind.
But when I run the mining model it gives me the following error: "Error 1 Error (Data mining): The data type of the Table1.Texto mining structure column must be numeric since it has a continuous content type (Content is set to Continuous or Key Time or Key Sequence). 0 0 "
So... How do I change this content type ? (the content type combobox on the Mining Structures Wizard couldn't the changed)
Can anyone help me on this, please ?
Thanks a lot.
View 6 Replies
View Related
Oct 18, 2006
Dear friends,
I encounter a serious problem.
I would like to develop an application that can create Data Mining structures and a mining model in SQL Server 2005 with VB.NET. I tried the code from book Data Mining with SQL server 2005 in chapter 14 but did not work. Any good idea?
Please help me.
Best regards,
Manolis
View 5 Replies
View Related
Oct 20, 2006
Thank you very much for your help.
The errors that I can see in the code that you gave in your answer are the following and they are more or less the same as I had previously
I tried the code but initially I have encounter the following problems.
1. In any line that have the declaration As Server, As Database like in
Public Function CreateDatabase(ByVal srv As Server, ByVal databaseName As String) As Database gives me the problem that type Database is not declared the same type Server is not declared and it does not give me any option.
2. In addition to that for As DataSource, As RelationalDataSource, As RelationalDataSourceView, As ScalarMiningStructureColumn, As DataSourceViewBinding, gives me the problem that type is not declared.
3. Finally in mc = New MiningModelColumn("Yearly income", Utils.GetSyntacticallyValidID("Yearly income", Type.GetType(MiningModelColumn))) is not accesible in this context because it is 'Private'.
I have some more problems but I thing that by solving the above that I referred I will solve the rest.
Thank you any way.
Best regards,
Manolis
PhD student
View 1 Replies
View Related
Nov 27, 2006
Hi ,all here,
Thank you very much for your kind attention.
I just found that I am not able to view the accuracy chart for my mining model. The error message is: no mining models are selected for comparision. Which is quite strange.
Any guidance? thank you very much.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Nov 23, 2006
Hi, all here,
Thank you very much for your kind attention.
I got a quite a strange problem with Mining structure for OLAP data source though. The problem is: I am not able to edit the mining structure in the mining structure editor. The whole data source view within the mining structure editor is greyed. Could please anyone here give me any advices for that?
Thank you very much in advance for any help for that.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Aug 4, 2015
With SASS Database i have created Data mining Structure Using Time series algorithm, while processing the SSAS db, Data mining  taking long time to process, so how we can  reduce processing time ???
View 2 Replies
View Related
May 12, 2015
We saved huge log data from user behaviour in our site .
But In data mining time , we saw that most of them cant use for data mining
What is the best practice about data gathering from user movement in site?
is there any best practice Template for this ?
View 0 Replies
View Related
Sep 26, 2006
Hi,
I have just run a simple data set through a model to predict a simple true or false value (i.e. binary output)
The Lift Chart/Mining Legend in Analysis Services shows three results €“ Score, Population Correct (%), and Predict Probability (%)
Population Correct I beleive is the percentage of predictions it got right out of the total number of predictions it tried to make. Is this correct?
However, I can€™t work out how the other two are derived in particular the 'SCORE'. To give a live example the scores were as follows:
Model Score Pop Correct Pred Probability
Decision Trees 0.83 76.59% 54.28%
Neural Network 0.75 67.63% 50.05%
Ideal Model 100.00%
Can anyone help with this and give a detailed explanation?
Many thanks,
S Rajput
View 4 Replies
View Related
Apr 11, 2007
Hi,
I am trying to model data in analysis services with the Advance Create Mining Model function in the excel addin. I am having trouble creating an association model that works like the Associate button above the Advanced button.
The format of my data is like this
OrderID Product
100 Bike
100 Helmet
100 Shoes
200 Helmet
200 basketball
200 Bat
300 Shoes
300 Socks
The associate button works perfectly since it asks me which column is the transaction id (orderid) and which column I am trying to predict (product). The advanced create mining model asks me to determine what the columns are...
OrderID=key Product=Input+Predict?
When I run the advance create mining model associate, I get a browser that gives me no rules and the support for only one item itemset (each product but no combination of products).
Does anyone know what I have to do to get it to work like the associate button?
View 8 Replies
View Related
Aug 17, 2006
Hi,
I've tried those two operations in the Management Studio.
Though we can create a mining structure and mining model in Management Studion,
but we cannot process the analysis-service database.
(1) I create only a mining structure through CREATE MINING STRUCTURE.
No error reported. But if I process the analysis-service database in Management Studio I always get error
'Error : The '<mining_structure__name>' structure does not contain bindings to data
(or contain bindings that are not valid) and cannot be processed.
I then tried to create it by creating and running an XMLA script. It was successful.
However, it's much harder to learn XMLA.
If any of you created an analysis-service database in Mgt Studio, and create a mining
structure in the same place using DMX script, can you process the database?
(2) Is there any use of CREATE MINING STRUCTURE operation without binding
to any table? Examples I saw so far did not show relating it to do. In my experience
processing the analysis-service database with that mining structure is doomed to fail.
(3) Is there any way we can create mining structure through CREATE MINING
STRUCTURE operation in Management Studio and use RELATED TO clause
to bind it to any Relationship to an attribute column (mandatory only if it applies), indicated by
the RELATED TO clause
(4) If this is the fact, is there any use of CREATE MINING STRUCTURE operation?
If we use BI Dev Studio, it's much easier to use the wizard.
(5) I found I cannot create a mining model inside a mining structure through operation
CREATE MINING MODEL. If you call that operation, you end up having a mining
model and a mining structure with the same name. I found that in order to create a
mining model inside a mining structure you have to call operation ALTER MINING
STRUCTURE ADD MINING MODEL. Is it true this is the only way?
Thank you,
Bernaridho
View 3 Replies
View Related
Nov 24, 2006
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Jul 10, 2007
Hi, all,
Why I got different results for the same attribute value displayed in my mining model? Any suggestions on what I may have missed for that?
In my case, the mining structure is with case table which is the fact table, within this mining structure, I dragged other attributes from its related dimensional tables as well. E.g The schema of the mining structure is as below:
.........................................................................................
Fact events key (key of the case fact table)
Agent type (attribute dragged from its related dimension table, which is not the key attribute of that dimension table)
Agent level (attribute dragged from its related dimension table, and it is not the key attribute of that dimension table as well)
......and other attributes dragged from its related dimension tables.
.......................................................................................
Then in my training model (using Microsoft Clustering algorithm), the content contained within the training model is very strange, e.g there are different results for the same value of attribute 'Agent Level' . Why did that happen and how can I figure it out? There should only one result for each value of each attribute within one mining model?
Please shed me some light on this issue and I am looking forward to hearing from you shortly for your kind advices and thanks a lot in advance.
With best regards,
Yours sincerely,
View 4 Replies
View Related
May 3, 2015
I am trying to delete tables from data where the ModifiedDates older than 9 years in AdventureWorks2012 database . I get console notified that foreign keys are dropped but the delete statement is throwing errors. I am sure that somewhere the key constraints are not getting altered, but i'm not able to figure it out as i'm a relative beginner to T-SQL. The error and code:
The DELETE statement conflicted with the REFERENCE constraint "FK_SalesOrderHeaderSalesReason_SalesReason_SalesReasonID". The conflict
occurred in database "AdventureWorks2012", table "Sales.SalesOrderHeader
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
$option_drop = new-object Microsoft.SqlServer.Management.Smo.ScriptingOptions;
$option_drop.ScriptDrops = $true;
[Code] ....
View 3 Replies
View Related
Jun 19, 2007
Hi, all experts here,
I am wondering is there any way to select only a portion of a data set to train the mining model? In this case, I mean we dont need to split the dataset in advance, what I want to do is being able to select any random portion of a selected dataset to train a mining model. Any advices?
I am looking forward to hearing from you and thanks a lot in advance for your advices and help.
With best regards,
Yours sincerely,
View 3 Replies
View Related
May 25, 2006
hi
I am new at MSSQL 2000 DBA thing. and trying to learn more about analysis service/data warehouse/data mining. so is any expert out there can Recommend some good books or web link article to read? Thanks
View 1 Replies
View Related
Jun 15, 2007
Could I ask how to spit the data into training and validation sets when doing data mining?
Thanks
View 1 Replies
View Related
Sep 11, 2006
Hi,
I am working with several tables, but for now I just mention 4 : one is fact table (named Usage), and 3 dimensional tables Periods, Products, and Regions. The fact table contains references to the dimensional tables. Table Periods contain two other columns month and year.
I created a cube containing columns from those 4 tables. Deployment was successful. Trouble comes when I want to create a mining structure using Time Series containing these columns :
- Period
- Amount (of money)
- Product name
- Region name
When I choose to use cube (instead of table) as source for mining structure, I'm forced to choose only one dimension (among the Periods, Products, and Regions). Whatever dimension I choose I end up being unable to use the column period as the Time-Key column. Effectively I cannot use Time Series method since I cannot use the column period.
(1) Why is this so [why Visual Studio forced us to use only one dimension from the cube] ?
(2) Why Visual Studio eliminates the column period, column that has relationship with the
time dimension?
(3) What is the use of Cube anyway to the mining? Is there still any use for it?
(4) What is the solution to that kind of problem I face?
Thank you,
Bernaridho
View 6 Replies
View Related
Dec 20, 2006
I'm stucked in a problem and I thought if you would be so kind as to helping me to resolve it.
I'm implementing a clustering algorithm plugin for text mining. I've already read the tutorials and sample codes provided by the MSDN Library.
Well... My problem is: I can't go through the data when the Predict method is called. I've read that this method implements the "core" of the custom algorithms. Here is a small snippet of my code for you to understand my doubt:
STDMETHODIMP ALGORITHM::Predict(/* [in] */ IDMContextServices* in_pContext,/* [in] */ DM_PREDICTION_FLAGS in_Flags,/* [in] */ IDMAttributeGroup* in_pPredAttGroup,/* [in] */ DM_CaseID in_CaseID, /* [in] */ ULONG in_ulCaseValues,/* [in] */ DM_ATTRIBUTE_VALUE* in_rgValues,/* [in] */ ULONG in_ulMaxPredictions,/* [in] */ ULONG in_ulMaxStates, /* [out] */ DM_ATTRIBUTE_STAT** io_prgPredictions,/* [out] */ ULONG* out_pulPredictions) {
for(UINT i=0;i<in_ulCaseValues;i++) {
DM_ATTRIBUTE_VALUE& dmattributevalue = in_rgValues;
ULONG iAttribute = dmattributevalue.Attribute;
if (iAttribute == DM_UNSPECIFIED)
continue;
double dblValue = ::DblContinuous(dmattributevalue.Value);
char buffer[129];
sprintf(buffer,"%f ",dblValue);
RENAN_Log::log(buffer);
}
return S_OK;
}
As you can see, I'm going through in_rgValues to get its values, but i'm only obtaining the first register of the table on the database. I need to roll over a kind of resultset so I could access all the registers I need. Is there any way to do so ?
I expected Predict() received a matrix containing all my data, but the only thing I noticed that could represent the data is that in_rgValues vector. So I can go through this vector, but it holds only the first register of the table in the database (that's what's being saved on my log). I need all of the registers in order to pre-process the data and implement my clustering algorithm.
Well... That's it... I would be very pleased if you could help me.
View 7 Replies
View Related
Jun 15, 2015
I have very little experience with programming and data mining, but I am working on a project where I need to take data from one spreadsheet and place it in another. Since it is hard to describe what I would like to do, I will provide an example:
SPREADSHEET 1
Column 1, Column 2
100, ?
101, ?
102, ?
103, ?
SPREADSHEET 2
Column 1, Column 2
102, 202
100, 200
103, 203
101, 201
In this example, the data in Column 1 is always tied to the data in Column 2 (i.e., 100 in Column 1 means 200 in Column 2, etc.) However, the data for Column 2 is only available in SPREADSHEET 2; moreover, the data is not in the same order in both spreadsheets.
My question is how can I create some sort of program where I can transfer the data from SPREADSHEET 2 into SPREADSHEET 1?
View 2 Replies
View Related
Dec 19, 2006
With the number of threads it is difficult to know if this has been posted. If I use the Mining Content Viewer for Linear Regression, under Node Distribution, there are values given for Attribute Name, Attribute Value, Support, Probability, Variance, and Value Type. The output is similar to what Joris supplied in his thread about Predict Probability in Decision Trees. My questions:
1. How should these fields be interpreted?
2. With Linear Regression, is it possible to get the coefficient values and tests of significance (t-tests?), if they are not part of the output I have pointed to?
Thanks for your help with this?
Sam
View 1 Replies
View Related
Oct 29, 2007
Hi,
I know, this is a common OLAP Error, but In fact I'm having trouble with this while trying to process a DM Mining Structure.
I'm currently working on a website that gets data from its users and analyzes it using SSAS. The thing is each time we add a new "analysis criterium" (sorry I'm trying to translate our french BI language in English...), we have to build a new mining structure, which needs data about users who have actually answered the question associated with this criterium. Some times, there are thousands, and some other only dozens, which is the case for the structure I'm having trouble with.
I got only 2 hundred tuples in the learning set. So lots of the common criteria weren't filled: I removed them using a stored procedure before feeding the structure, so that I got no column with only "null" values.
Of course, I know that 200 learning cases is really not enough to build an accurate model, but the purpose was just a proof of concept for machine driven Mining Structure building, and that was supposed to work even with so few cases.
When I process the MS, it fires: (Sorry it's in french, translation follows)
Erreurs dans le moteur de stockage OLAP : La cl̩ d'attribut est introuvable : Table : _x0032_0_EtudeIphone_Apprentissage, Colonne : EtudeIphone, Valeur : le nouvel iPhone (t̩l̩phone tactile et musical d۪Apple). Erreurs dans le moteur de stockage OLAP : La cl̩ d'attribut a ̩t̩ convertie en un membre inconnu parce que cette derni̬re est introuvable. Attribut Id de la dimension : 20_EtudeIPhone ~MC-Id de la base de donn̩es : ClassificationVDCE, Enregistrement : 2.
Badly translated it says "Errors in OLAP Storage Engine: Attribute Key not found Table:<StrangeTable> Column <MyPredictableColumn> Value <OneOfTheInterestingValues>
Errors in OLAP Storage Engine: Attribute key not found: converted to an unknown member. Attribute Id from dimension..."
Why? Too few cases? I have structures based on the same template but associated with other criteria and they work perfectly.
I'm ready to answer any question, and give any detail.
Thanks in advance.
François JEHL
IT Consultant
Winwise - Paris
PS: Of course, my "Id' column is unique....
View 1 Replies
View Related
Jul 10, 2007
Hi, all,
Just found that we are not able to define multiple key columns for a mining structure in SQL Server 2005 Data Mining engine, just wondering is there other way to define multiple key columns for a mining structure there? As in many cases, the table we are mining are with composite key consisting of different foriengn keys, e.g. A fact table are with transaction information and other foreign keys. If I am not able to define these composite key here for this fact table, I will have to have a named calculation in data source view to have a key column which is based on these original composite keys? Is this a better way to solve this problem or there is any other alternatives to figure it out?
Hope my question is clear for your help and I am looking forward to heaing from you shortly for your kind advices and help and thanks a lot in advance.
With best regards,
Yours sincerely,
View 6 Replies
View Related
Feb 21, 2007
Hello,
Can anyone spot what i am missing here ? The problem is that i am getting a null object for e.TextData in the t_OnEvent(object sender, TraceEventArgs e) function below. I am trying to get event- notifications while processing the data mining structure.
thanks
anil
//-------------code below-------------------------------------
using Microsoft.AnalysisServices;
private void ProcessMiningStructure(MiningStructure mStruct)
{
Trace t;
TraceEvent e;
t = server.Traces.Add();
e = t.Events.Add(TraceEventClass.ProgressReportCurrent);
e.Columns.Add(TraceColumn.TextData);
t.OnEvent += new TraceEventHandler(t_OnEvent);
t.Update();
try
{
t.Start();
mStruct.Process(ProcessType.ProcessFull);
t.Stop();
}
catch (Exception ex)
{
}
t.Drop();
}
//------------------------------------------------------
void t_OnEvent(object sender, TraceEventArgs e)
{
SetText(e.TextData);
}
//------------------------------------------------------
View 4 Replies
View Related
Jul 24, 2007
Hi my friends,
I do have a problem with results of clustering algorithm with my categorical data.
In reality I have a big table with one's and zero's and I try to cluster according to 60 attributes.
I tries to cluster to two categories many times but I get only one cluster. What do you suggest. Which values can I change to the algorithm? Is there anything particular for categorical data ?
Thank for your help in advance.
Manolis
View 3 Replies
View Related
