I am new in MSSQL server. I need export users IP address from SCCM. I have a CSV file with lot of IP address. I need import those IP address and export same IP address and users samaccountname.
View 3 RepliesA view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
Thanks for kindly reply.
Best regards,
Calvin Lam
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Could you please look into this and guide me
Thanks in advance
venkatesh
imtesh@gmail.com
Hi, all here,
I am wondering where can I store my mining results in data mining engine? For example, I got mining results like accuracy chart, decision trees, and other formats of results based on different mining algorithms I used for my data mining, so where can I actually store the results for reporting service use later? Is it possible to do that in SQL Server 2005?
Thanks a lot for any help and guidance in advance.
Hi all,
It looks like these options are only available in the SQL Server Management Studio? I installed SQL Server Management Express Studio and I can't even find the DTSWizard.exe on my machine.
Can you please help how I can import data from excel or where can I download the SQL Server Management Studio?
Your prompt response is greatly appreciated.
Thanks!!
Tram
Hi
I am using CSV (comma delimeted file) for exporting data from sql server table to CSV and then import to sql server from the CSV.
Now I have a problem, I could sucessfully export the data to CSV, but one of the field which has whole html for each product is giving me problem, It wouldnt save in one cell as for other data items in a record are. If I remove that field, the rest of records are exported okay, but with this one, it do export, but the data wouldnt go to one cell of the excel file and hence wouldnt work in importing to sql. I guess some tags in the string is creating problem plus also what should I do if the string already have comma as data, and we use comma as delimiting character.
Any kind of help greatly appreciated
EDIT:
Below is a sample of html thats already saved in one field but wouldnt come to one excel cell when exported to CSV...
<P><TABLE class=content cellSpacing=0 cellPadding=2 width="100%" border=0><TBODY><TR vAlign=top><TD><STRONG>Product</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD width="46%"><STRONG>XXXX</STRONG></TD><TD width="54%">XXXX </TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>up to 4MB/s</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXXX<TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR></TBODY></TABLE><TABLE class=content cellSpacing=0 cellPadding=2 width="100%" border=0><TBODY><TR vAlign=top><TD><STRONG>XXXXX</STRONG></TD><TD>XXXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXX</TD></TR><TR vAlign=top><TD><STRONG>XXXX</STRONG></TD><TD>XXXXX</TD></TR></TBODY></TABLE><A href="http://www.xxx.xxx" target=_blank><BR><BR>xXXX</A><BR><BR>Â </P>
Regards
Mykhan
Hi every body
I have 2 databases called Tax and News
There is a table in database Tax called table table1(id, Title,Content)
There is a table in database News called table table2(id, Headline,Body)
How can I copy(append) data from table1 to table2 with mapping Title -> Headline and Content -> Body
Any answers would be appreciated.
Hi Everyone..
I want to import and export sql tables to dbase IV or any other format..But i want to run DTS Wizard from inside VB6.. IS it possible .. or if you guys know some other method to import and export tables in which i can provide the choice to transfer into any other format..please let guide me i'll be obliged..
Tahir
Hi,
I am trying Express Edition 2005 but could not found GUI init, can someone advsie that which SQL Server 2005 provides GUI and which one is more friendly to import/export data- thanks
AA
how to import/export data with sql express?
View 7 Replies View RelatedIm using the sql import/export features to transfer a database from one server to another. For some reason when I am transfering tables with primary keys when I look at the new database on the other server it doesnt seem to hold the primary key info. Can anyone tell me why and how i can preserve this info so I dont have to go back through and reset this info.
thanks
Hello everyone,
I'm having difficulties in Importing data using DTS with a SQL Query.
The Sql query :
SELECT *
FROM Organisations
where Organisations.OrganisationID = 1
I receive this Error Message :
Error Source : Microsoft OLE DB Provider for SQL Server
Error Description : Deferred prepare could not be completed.
SELECT permission denied on object 'Organisations', database 'souce_db', owner'dbo'.
Context : Error calling GetColumnInfo. Your Provider does not supprt all the interface/methods required by DTS.
Can anybody help me . Thanks
How to refresh table data on sqlserver without dts or backup/restore whole database.
In sqlserver, is there a way to import table(s) data (like import export in oracle) in a file and export to another unconnected server/db.
Please advice.
Greetings All,
I need to export/import the ASP.NET Membership data which is installed in my database via aspnet_regsql.exe. Does anyone have the Cliff notes on how to do this?
Thanks in advance.
I followed the tutorial posted at [URL] ...
Everything was ok until the last step where I had to process the mining structure which resulted in a warning
"Informational (Data mining): Decision Trees found no splits for model, Tbl Decision Tree Example."
What does this error mean? How do I resolve it? Also, I only see the first level in the Mining Model Viewer, I don't see the levels 2 and 3.
Hi,
I have two environements:
1) Development (Full access to SQl Server 2005)
2) Hosting SQL Server 2005, ONLY accees to the database MYDatabase, NO access to master
I would like to copy a table from my development to hosting. I would like to have an exact replica of the table in hosting. I DO NOT want to copy the whole database, just a table. I was able to do this without problems in SQL 2000/Enetrprise Manager.
I have tried to copy the table using the new import/export data wizard. I did enabled Identity Insert option. There are few problems:
1) The drop table and recreate option (under Mappings) is disabled, I can not check it. IS THIS a BUG? I have latest SP 3 aplplied
2) When I just run it I get the following errors. Also the problem is that it runs in trunsaction, I was hoping it would skip the duplicate records and just copy the ones I need. Seems it is all or nothing, very common problem in Windows based systems (same problem in Explorer when copying files)
3) I was hoping that such a simple task as mirroring a table would be easly achieved, please help
Messages
Information 0x402090df: Data Flow Task: The final commit for the data insertion has started.(SQL Server Import and Export Wizard)
Error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_classifieds_HotelRoomTypes'. Cannot insert duplicate key in object 'dbo.classifieds_HotelRoomTypes'.".(SQL Server Import and Export Wizard)
Information 0x402090e0: Data Flow Task: The final commit for the data insertion has ended.(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - classifieds_HotelRoomTypes" (37) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202009. There may be error messages posted before this with more information on why the thread has exited.(SQL Server Import and Export Wizard)
I have a database in 3rd normalized form and want to export data and import it in a copy of that database. Is there a way for the import/export wizard to unload and reload the data in the right order, so that parent tables are loaded before child tables? If the import export wizard can't do that, what other options are available?
View 2 Replies View RelatedHi, all experts here,
I would like to know if there is any way to migrate third-party data mining packages with SQL Server 2005 data mining algorithms together then we can have a comparison among all of them to get the best results for training models.
I am looking forward to hearing from you.
Thanks a lot.
With best regards,
Yours sincerely,
Hoping someone will have a solution for this error
Errors in the metadata manager. The data type of the '~CaseDetail ~MG-Fact Voic~6' measure must be the same as its source data type. This is because the aggregate function is not set to count or distinct count.
Is the problem due to the data type of the column used in the mining structure is Long, and the underlying field in the cube has a type of BigInt,or am I barking up the wrong tree?
I'm a beginner with SQL 2012 SSDT & SSMS. I get this error message when I try to deploy my project:
"Error 6
Error (Data mining): KEY SEQUENCE columns are not supported at the case level. The 'Customer Key' column of the 'TK448 Ch09 Cube Clustering' mining structure contains content that is not valid.
0 0
"
I am finding it hard to locate the content that is not valid. I've been trying to find a answer for this problem but can't seem to find anything. How can I locate the content that is not valid and change or delete it so that I can deploy this solution?
Having successfully created :
- a data mining structure with about 80 columns.
- a data mining model using Microsoft_Decision_Trees with 2 prediction columns.
I thought I would then explore the possibility of have more than 2 prediction columns, in this case 20.
I get an error message and I can't work out :
a) if this is because there's a limit to the maximum number of prediction columns and where that maximum is stated.
b) if something else has become corrupted
c) there's a know bug and if the error message is either meaningful or not.
Either way, I'm unable to complete the data mining wizard
The error message is :Errors in the metadata manager. Either the mining structure with the ID of '[my model Structure]' does not exist in the database with the ID of 'DMAddinsDB', or the user does not have permissions to access the object.
I needs export data on table to text file so I can process this data
with another database engine ie. Informix.
Can anybody help me to solve this problem ?
I'm noticed that in sql server 2005 express edition do not have import/export tools which is found in sql server 2000. Is it not supported only in this version or I have to upgrade my sql to other version to have this facility?
View 1 Replies View RelatedI'm just beginning to use SSIS (bracing for a steep learning curve due to lack of helpful documentation) and am starting out trying use the Import and Export Wizard. On the "Choose a Data Source" page there is a dropdown for the Data Source. I see a list of possible data providers, but not one of "Microsoft OLE DB Provider for ODBC drivers," which is the one I wanted to use because I'm trying to connect to an obscure database. So I figured that I need to use ".Net Framework Data Provider for Odbc." Unfortunately, regardless of what I enter for the Connection string or the Dsn or the Driver I invariably get an error, although it's somewhat dependent on that I have entered for those three items.
Either this (when I type in a DSN)
Cannot get the supported data types from the database connection "Dsn=Terrascan_Okanogan_WA".
or this (if I enter a full connection string and a driver)
The operation could not be completed.
------------------------------
ADDITIONAL INFORMATION:
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
of this (if I enter a DSN and a driver)
Cannot get the supported data types from the database connection "Dsn=Terrascan_Okanogan_WA;Driver={SmartWare Driver}".
------------------------------
ADDITIONAL INFORMATION:
Specified cast is not valid. (System.Data)
So I have a couple questions. First, why doesn't "Microsoft OLE DB Provider for ODBC drivers" appear in the list of data sources, and secondly, when using the ".Net Framework Data Provider for Odbc" data source what inputs are expected because whatever I'm doing doesn't seem to work?
I am trying to import data from SQL 2000 to SQL 2005
The Data schemas are the same in both (tables, relationships, key and triggers).
Using the wizard I am trying to import data from SQL 2000 to SQL 2005. The issue I face is to manage the Idenity columns. I do not want the identity values from the SQL 2000 DB which may be at say 5000, instead I want to use the identity values from the SQL 2005 database which will problably start at 1
Is there a way to do this, should I use a custom query instead of a direct table dump. If using a custom query do I need to just specify a Select query or does it have to be a specific "INSERT INTO Table ..." type query
If I do import the data directly with Identity "ON" how can I advance the identity column value to current +1 on the SQL 2005 table.
Thanks
javahar
hello ,
I want to download data from an AS/400 to a SQL 2005 Database.
Within Sql server 2000 it was possible to do more than 1 transformation with just 1 source connenction and 1 destination.
In SSIS I have created:
- new solution
- data source
- Data source viewer ( I made named queries to format the data as i want it to be in Sql)
Although it is possible to view the named query data it does not seem to be possible to import the data in the data viewer into my sql 2005 database. (For each dataflow I have to define each query again)
I have added the data source in the connection manager.
Also I am searching to import more than 1 file in 1 package !
I can use however a Dts-2000 package but why then use SQL server 2005
Hope somebody can help me
Regard,
Ronny
Hi All,
Do you have any idea why I am not getting any ODBC in import / export Data Source list???
I am trying to link connection with Informix Server through ODBC, same ODBC is working good with ACCESS.
I am using SQL Express 2005
Using Windows Authentication
Thanks for your help in advance
AA
Hi all,
I am using Microsoft_Time_Series and have set HISTORIC_MODEL_GAP to various values (from 1 to 21). I always get this error:
Error (Data mining): The 'HISTORIC_MODEL_GAP' data mining parameter is not valid for the 'My Time Series' model.
In Algorithm Parameters window, this parameters is not there by default, so I have to add it.
Any tip will be greatly appreciated.
Implementing data mining Add-in in an academic setting? We need to handle over 150 new students a semester and have their connection to Analysis Services survive for their four years at the college. We are introducing data mining to every freshman business student as a unit within their Intro to Excel class (close to a month of work to give them a sense of what is possible). Other courses later in their curriculum will expand on that introduction.
Once implemented, we would have as many as 900 connections to manage (four years from now). It is possible that multiple sections will be running at the same time, so 40 students may be accessing the data mining tools concurrently.
Is there a way to "bulk establish" the access credentials and establish those databases?
Not seeing the Review Data Type Mapping Screen in SQL Server Import and Export Wizard?
Is there only a certain version where that screen shows up?
I am trying to import data from an MS Access application to SQL Server and all of the connections are good, but some of the data isn't and if I let it migrate using this tool it crashes on the bad data and there is no data that migrates. The Review Data Type Mapping screen will allow me to bypass the records in error and load the rest. however, I can;t do that if I cannot see the screen.
Greetings.
Our company is planning to upgrade to ESRI's brand new ArcSDE Personal edition and SQL Server Express 2005 platform to do GIS work for our clients. We are not in a position at this time to migrate to the full ArcGIS Server and SQL Server 2005 platform. We currently use a Microsoft Access 2003 relational database, and have no intention to move to Access 2007.
ArcSDE Personal cannot connect to SQL Server 2005, but it is able to connect and work with SQL Server Express 2005.
In SQL Management Studio Express, we were unable to find any feature that would allow us to import and export data to/from SQL Server Express. This is rather unusual, as we need to test how SQL Server Express will handle import and export data. In Microsoft Access we simply right click and choose import or export in the database window. Easy as pie. We ran the upsize wizard in Microsoft Access to migrate our data. But after that, our GIS team was pretty much stuck.
My question is, how does one import/export data to/from SQL Server Express? Do we need to install a missing component? Is scripting required? Or should we wait until we are able to acquire the SQL Server 2005?
D. Schmid, M.Sc.
North/South Consultants Inc.
Winnipeg, Canada
Where is a package visible when running the Data Import/Export wizard, choosing to save a package, and choosing "SQL Server" as the location? When I make an SSIS connection in Management Studio I do not see the package under the "MSDB" node.
View 4 Replies View RelatedI am trying to import an Excel file into SQL Server 2005 using the SSIS import/export wizard; however, Microsoft Excel doesn't show up in the list of the data sources. I am assuming that something else must be install from either Microsoft Office or SQL Server 2005. I am using Microsoft Office 2003 on a Window XP machine. Does anyone know what I need to do to correct this.
Thanks,
Tim