I did not see a forum for the SQL Server 2000 DTS.
I have a flat file feeding a table via a data pump. The table is only used by this process. It will run for about 30minutes and then fail. The message in the history does not give any detail on why it is failing. Below is the message I get and if I rerun the job it works fine. Anyone help me please.
Date 07/23/2007 6:00:02 AM
Log Job History (Daily: Load EOL from MVS1 (First Run))
Step ID 1
Server PIT-CS-M608
Job Name Daily: Load EOL from MVS1 (First Run)
Step Name Daily: Load tblCaseMasterSched
Duration 00:28:05
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: PIT-CS-M608SYSTEM. ...rt: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 1000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 1000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 2000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 2000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 3000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 3000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 4000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 4000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 5000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 5000 DTSRun OnProgress: DTSStep_DTSDataP... Process Exit Code 1. The step failed.
I've created a package that runs fine from BIDS when logged in with my domain account. I have created a SQL Agent Proxy on the server with that same account. In the Job Step on the server, I edit the connection strings so that username and password is there for both my source Access connection and the destination SQL Server. Here is the connection string I create for MS Access:
Code SnippetData Source=\10.210.226.202OTM Reports for SymmetricsCDRD001.MDB;User ID=admin;Password=;Provider=Microsoft.Jet.OLEDB.4.0;
Here is the error:
Code SnippetExecuted as user: DOMAINMRUSER. ethod call to the connection manager "MSAccessDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2008-01-30 09:49:19.66 Code: 0xC0047017 Source: Cost DTS.Pipeline Description: component "Cost" (1) failed validation and returned error code 0xC020801C. End Error Error: 2008-01-30 09:49:19.66 Code: 0xC004700C Source: Cost DTS.Pipeline
I have tried with various settings in the package for "ProtectionLevel" such as "DontSaveSensitive" and "EncryptSensitiveWithUserKey". I would think that using my account with the proxy the last option would work when running it on the server, since it is essentially the same user running the package, but I'm new to playing with the proxy.
I tried using package configurations but got an error there too, think it couldn't access the file, event though it was on an accessible share--accessible to my account.
My client is using a sql server 7.0 to store realtime data like heat,temp,pressure etc inserted every second.He wants me to provide a solution to transfer the summarised data to oracle server on a regular basis..say once on every 5 min..
I have to value [CreateDate] in the data pump of my Flat File Source into my OLE DB Destination SQL Server Table. With a Variable within the SSIS Package or with a Derived Column task within the Data Flow between the Flat File Source and OLE DB Destination?
I have a largish DTS package built generically from VB. It uses a combination of DTSExecuteSQLTask and DTSDataPumpTask (using SQLstatements for the source). 18 tasks are failing (1 and 17 respectively by the above types).
When I try to execute the tasks individually I get messages like "Column name xxxx was not found". the column does exist in the table specified in the SQL statements and further the SQL statements execute ok using the Query Analyzer.
If I select Properties, Transformations for a task I get presented with the Verifying Transformations dialog (i.e. indicating there are errors). If I select the third option (Remove all transformations and redo audo-mapping) and save my changes the task then executes okay.
I have a vbscript to read all files from a directory and, if the fileis valid, I would like my DTS to process it. I tried using thevbscript as an ActiveX workflow script in the DTS, but it does notexecute the data pump until it has completed looping through all thefiles, so only the last file read is sucked into the database(utilizing a global variable as the filename). Is there a way toexecute the data pump task from within the activex script? I can'tseem to find any documentation about executing a DTS task.Basically, the workflow I want is:1)Read files from directory (the number and names may change eachtime). (done with vbs)2)For each file, send it through the transformation into the database.3)When the information is in the database, append a date to the fileand move it to the archive folder. (done with vbs)If I am going about this the wrong way and you see something that isnot obvious to me, please let me know.Thanks in advance!
I'm currently creating a SSIS package that takes data from 3 unique databases. A SQL DB, FoxPro DB, and an Oracle DB. The data is pulled, cleansed and put into a single SQL 2005 table. The data is then pulled from this table every 15 minutes, formated in a given specification and uploaded to an ftp site. This part is done. My question is this:
This package needs to run around the clock, non-stop. How can package be set up to do this? It needs to pull data from the 3 DBs and put it in the common table, wait 15 minutes and do it again. Wait 15 more mintues and do it again. And so forth. A problem I'm having is I don't see a way to set up a SSIS package so that it runs around the clock.
On same premise, I have another issue. When I try to take data from the common table and there is nothing there, it causes an error. Is there some way that you can run a test like
SELECT * FROM _table_ WHERE is_sent = 0
if results == 0 { wait 15 minutes and test again. } else if
{ write flat file, wait 15 minutes. }
This has to be done in the Control Flow scope, so I can't use a conditional split. This is a pretty big deal as this needs to run around the clock. Thank you in advance for your assistance.
I am having trouble understanding how the SSIS data pump determines when to decide "The final commit for the data insertion has started/ended". On some tasks the rows are inserted one at a time every few milliseconds (shown by a default getdate() in a datetime column). In others the final commit occurs as I would expect at the end of the data pump task.
There are times i want the data pump task to commit all records that are succesful, row by row and there are times I want an all or none situation. Can somebody explain why this behaviour occurs and how i can control which commit option I want the data pump tasks to use?
is there a step by step paper to get there? here is what i need to consider. I Iwill have many customers that will need their own set of records and access pages "branded for their company" each customer will have many clients. I am hosting this application on a windows 2003 server with SQL 2005 server enterprise.
I am using windows authentication, I have created a username in windows, then i added the windows user in SQL management studio in security, granted "DB Read" and "DB write" and again under the database security tab. still from the web authentication fails. i must be nissing a step or two?
I expect to set up a username for each database as i setup new customers.
I am transferring data from one SQL table to another. The first table has a PK on the unique id only, the second table has PK on five fields (the idea being to reject duplicate records etc. etc.). I am using a DTS package to do this, but when run it will fail when it hits a PK violation. How do I getround this??????? What simple thing am i missing??
I have a Data Flow task which uses an XML File Source with six parellell Outputs, each going firstly to a Data Conversion Task, then the results of each end in a SQL Server Destination Object. (All using the SQL Native Client)
To eplain this further, the Xml file contains 6 different types of elements, the Dataflow splits out each type of element and processes them into different tables. The Data Transformation object exists only because the XML fields are Uni-code and the table fields are VarChar not nVarChar.
Initially using this setup I found that the Connection would timeout using the SQL Native Client so I changed the Timout on the Destination Objects to 0. This fixed the problem to some degree, however at present I can run the Pakage using the Visual Studio enviroment and everything works fine, no problem. When I run the Dtsx file using the SQL Server Agent, I end up getting the error below...
Error: 2007-12-14 14:33:19.16 Code: 0xC0202009 Source: Import XML File to SQL SQL - CP [2746] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from
I understand that this error is somewhat of a 'catch all' and that the way the Native SQL Server Connection object works makes Error Capturing difficult. I have tried a few things which I will list as I'm sure they will be suggested...
I have played around with the 'MaxInsertCommitSize' property of the SQL Server Destination Objects to no avail (IE, changing to 50000, 10000, 1000 all of which resulted in the same problem)
I am running the ssis pakage from the server which is the destination
As mentioned above the Timeout on the SQL Server Destination Objects is set to 0
What I have already mentioned and still don'tt quite understand is that I can run the job successfully from the Visual Studio enviroment but as a job run off the SQL Server it fails...
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
i ran it from the command prompt. I used my nt account which belongs to the domain admin nt group. my account does have sql access as sa.
also on one of the servers all jobs are failing with the following message - Unable to Connect to Sql Server (local). The nt log records the error that the specific user sqlexec (this is the account on which sql executive runs) is not defined as a valid user of a trusted sql server connection. I am not able to change the security setting on this server using EM nor am i able to use the sql security manager. I get an access denied error. What is the workaround for this problem? Will stopping and restarting the sql service help? ------------
How did you run bcp? In dos prompt or as sql job? Which nt account did you run bcp under? Did you grant sql access for that nt account?
yes i did. it still gives me the same error - 18452 error not associated with a trusted connection -----------------
Did you enable mixed login mode on the server?
------------ aruna at 1/3/01 2:55:59 PM
hello ray
It still does not work. I granted SA rights for the nt group via sql security manager. For one of the servers i get the following error message - This sql server does not support Windows NT SQL Server Security stored procedures.
-------------- From: Date: bcp over trusted connections failing (reply) Ray Miao () 1/3/01 12:51:50 PM
Use security manager to grant access for nt account.
------------ aruna at 1/3/01 11:59:49 AM
i am attempting to bcp using the -T (trusted connection) option in sql 6.5. the login security mode is set to integrated. the bcp is however failing with msg 18452 error not associated with a trusted connection. why is this happening? i do not want to hardcode the sa password in the bcp command.
I have an excutable on the c drive and I have created a job to run that excutable
In the Job C:Folderjob.exe BA
The job was running until we had a power outage. Now I can get it to run with a scheduled job, the only way I can get it to run is typing it on the command line. I have tried droping and recreating this job but nothing works.
The error is: The stip did not generate any out put.
Do I need to troubleshoot the excutable which is a whole other beast.
I have a scheduled job on a SQL 2000 database which is failing. Here is the error message :
The job failed. Unable to determine if the owner (cacisnasir) of job Integrity Checks Job for DB Maintenance Plan 'IDS' has server access (reason: Could not obtain information about Windows NT group/user 'cacisnasir'. [SQLSTATE 42000] (Error 8198)).
I am the SA on the instance. I wonder why would I be getting this error message? I am able to logon to this instance and browse and change things. So clearly it recognizes me. But when I run the job it fails. Wonder why? my SQL Server version is 8.0.
Currently I am building an application for a theme park where I work as a trainee for school, one project for me is to rebuild all the hundreds of databases into a few sql driven application's. Now I got a problem whit the use of SCOPE_IDENTITY(). Because the data has to be correct before inserting it into the database I use the transact features of .NET and I create 1 SQL string wich I dump in that method. The problem is that I can't be able to use the value of SCOPE_IDENTITY() for some reason, maybe you guys see a mistake in the actual (dynamic) query: Here is the query built up by my program to write the data (of a single form) into the database:
I have some DTS packages some times failing.one day sucess and next day it's failing. The following error showing. DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147217900 (80040E14) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 7399 (1CE7) Error string: OLE DB provider 'SQLOLEDB' reported an error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040E14); Provider Error: 7312 (1C90) Error string: [OLE/DB provider returned message: Timeout expired] Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_3 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRu... Process Exit Code 1. The step failed.
this is the message that i'm getting and i dont know what to do so that i can access my SQL databases thru cold fusion:
ODBC Error Code = 37000(Syntax error or access violation)
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
i didnt have any problems with this database until i moved it over to another SQL server and tried the cold fusion front end to it. i dont know what to do now.
I have inherited the task of setting some standards for SQL Server setup and usage in my company. Use of SA with and without a password was rampant. As I get DTS jos and VB code changed to use another account I have been securing the SA account with a password that no one uses. I now get a multitude of failed logins for the SA account on multiple systems by people trying to logon as SA, not jobs. Is there any way to generate an error message that will pass the host PC or server, or network ID of the user trying to login with the SA account?
When I create a DTS to import data from Visual FoxPro it will work if I run immeadiately, but when I schedule it to run at a specific time it will Fail. Any ideas why??
I have a table with a field called remarks as text field. I have a trigger on it, "Create Trigger trg_inbox_bess506a_mstr_on_del On dbo.inbox_bess506a_mstr For Delete As -- 040226, archive inbox to arc set nocount on insert into inbox_bess_mstr_arc ( pk_id, batch_id, py, appropriation, issueFrom, issueTo, submitBy, submitDate, validID, validDate, approveDate, approveBy, accountCode, transType --remark ) select pk_id, batch_id, py, appropriation, issueFrom, issueTo, submitBy, submitDate, validID, validDate, approveDate, approveBy, accountCode, transType --remark from deleted return
GO"
It fails with an error message: "Server: Msg 21, Level 22, State 1, Procedure trg_inbox_bess506a_mstr_on_del, Line 8 WARNING - Fatal Error 7113 occurred at Dec 22 2004 11:25PM. Please note the error and time, and contact your System Administrator."
It's failing on a field with remarks greater than 1885 chars.
When I used a stored procedure to do the same, it worked. Why is the trigger failing now? Is there a limit on size for triggers and not procedures?
The DTS package would execute and immediately fail. a reboot of this server fixed the problems, but does anyone know how to get more info out of DTS to state why it failed, we have branch on error and NT event log entries, but nothing specific to state why. The 1st task is to assign global variables, but I'm not even sure it got that far.
Obviously the problem is fixed now, but if it happens again, some ideas of how to get data out would be useful.
Hello I have two tables that have the same data in them but not all the data is in the new table. the old one has 397 more records then the new one and I need to insert that data in the new table but it keeps giving me a primary key violation rule.
SELECT dbo.Revised_MainTable.[IR Number], dbo.Report.[Incident Report No], dbo.Report.Date, dbo.Report.[I/RDocument], dbo.Report.TypeOfIncident FROM dbo.Revised_MainTable RIGHT OUTER JOIN dbo.Report ON dbo.Revised_MainTable.[IR Number] = dbo.Report.[Incident Report No] WHERE (dbo.Revised_MainTable.[IR Number] IS NULL)
I have a SP that basically copies data from one table to another. Some of the data could be duplicates and so the SP detects any primary key violations (error 2627) and if detected uses a random number for the PK and tries the insert again.
This SP works fine when run manually from Management Studio but when scheduled as a job step, it fails. From investigation, it seems that the logic to handle PK violations is being processed but if there are more than around 16 PK violations in the batch copy, the job step fails at around the 17th violation insert and fails to process the rest of the step.
When this happens, as well as seeing the 2627 error logged in the message field of the job log history, it also records an error code 3621 in the SQL Message ID field of the log with Severity 14.
Does anyone know why this SP should fail as a job? I have checked permissions and also tried setting the agent login and job owner to the same account that successfully ran the SP in Mangement Studio but this also failed.
At present the only way to get this job to run is to set the step retry attempts to a number greater than the number of fails. Each time the job is rerun, it will process a certain number before failing and it only fails after processing a certain number of PK violations. This work around is fine in a test environment of a few hundred records but this job needs to process roughly 75,000 records and if all these happened to be duplicates, it would require over 4500 retries assuming its fails after every 16 records.
I have a SP that basically copies data from one table to another. Some of the data could be duplicates and so the SP detects any primary key violations (error 2627) and if detected uses a random number for the PK and tries the insert again.
This SP works fine when run manually from Management Studio but when scheduled as a job step, it fails. From investigation, it seems that the logic to handle PK violations is being processed but if there are more than around 16 PK violations in the batch copy, the job step fails at around the 17th violation insert and fails to process the rest of the step.
When this happens, as well as seeing the 2627 error logged in the message field of the job log history, it also records an error code 3621 in the SQL Message ID field of the log with Severity 14.
Does anyone know why this SP should fail as a job? I have checked permissions and also tried setting the agent login and job owner to the same account that successfully ran the SP in Mangement Studio but this also failed.
At present the only way to get this job to run is to set the step retry attempts to a number greater than the number of fails. Each time the job is rerun, it will process a certain number before failing and it only fails after processing a certain number of PK violations. This work around is fine in a test environment of a few hundred records but this job needs to process roughly 75,000 records and if all these happened to be duplicates, it would require over 4500 retries assuming its fails after every 16 records.
sql server scheduled job 'db name' (0x5EA2833965097647B1D375899CE3E179)-Status Failed-Invoked on 2007-12-09 00:01-Message: The Job Failed.The job was invoked by schedule1 (sunday 12 am) . The last step to run was step 2(db name)
Job History:
step 1: Excuted as user NT AUTHORITYSYSTEM. The step succeeded step 2: Excuted as user: NT AUTHORITYSYSTEM . Invalid object name '#DiskSize'.[SQL STATE 42S02][Error 208]. The step failed. step 3: The job failed. The job was invoked by Schedule 1 (sun 12 am). The last step to run was step 2{db name}
I am new to SQL server, please help? Thanks in advance
I was hoping if someone can help me shed some light on the following error messages -
Some of the billing jobs in SQL are failing, here is the message from application log - This is happening on the production server.
"SQL Server Scheduled Job 'Transaction Log Backup Job for DB Maintenance Plan 'DB Maintenance Plan3'' (0x8BCD2C33DF5EC447BC7F1228E2C455E4) - Status: Failed - Invoked on: 2007-12-20 06:00:01 - Message: The job failed. The Job was invoked by Schedule 54 (Schedule 1). The last step to run was step 1 (Step 1)."
Has anyone seen this message before, whats a way to fix this issue.
Backup job for User databases is failing. I found below errors View job history
Step 0: The job failed. The job was invoked by schedule 4(DBMP_User). The last step to run was step 1(subplan) Step 1:
Message: Executed as user ServernameSystem. The package execution failed. The step failed
Appln-event log:
SQL server scheduled job DBMP_User failed. Invoked on 2007-12-24 , the job was failed.
Sql server error log
Database backed up. DBname creation,date()time……paged dumped 8434659,first LSN: 21126:101410:48,last LSN :21128:933:1, number of dump devices:1, device information: file=1,type=disk (E:MSSQLBACKUP ) This is an informational message only. No user action is required
Error log:
Date: Log: SQL Agent (current …) Message: (396) An idle CPU condition has not been defined-OnIdle job schedules will have no effect.
