I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3. Â Â Set the Maximum = Â Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize  the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
i am once again working with mailing labels. I have designed the report in SQL Server Reporting Services to print in 3 columns with a body size of 2.625" wide by 1.00" high; a rectangle the same size which then contains a list the same size which contains the data fields. I get fairly good results when I print to one printer however, there does seem to be a bit of "creep" on the page. The problem really shows when trying to print to another network printer where when a user prints the report (labels) by the end of the page data is printing outside of the label margins. are there some properties that I'm missing that would prevent this or could this be related to printer settings?
I am trying to fill a Textbox with the Label-Field from the Report Parameters. The Multi-Value-Option is checked and it is possible to select multi-values from the time hierarchy [Time].[Year - Half Year - Quarter - Month].
For example you can choose: "Calendar 2007" ([Time].[Year - Half Year - Quarter - Month].[Year].&[2007-01-01T00:00:00]) "Quarter 4, 2006" ([Time].[Year - Half Year - Quarter - Month].[Quarter].&[2006-10-01T00:00:00]) and "April 2006" ([Time].[Year - Half Year - Quarter - Month].[Month].&[2006-04-01T00:00:00])
Now I want to fill a Textbox with the chosen parameter values by putting following expression as value of the textbox:
Parameters!TimeYearHalfYearQuarterMonthDate.Label ... with "TimeYearHalfYearQuarterMonthDate" as the name of the DataSet.
hi, i am facing a problem in creating labels usin Report Builder. i need to create a 4X6 label containing 4 rows. But in Report Builder , when i try to create a table format, it only allowing one row. How to insert another row and place data in it?
i was successfully developed labels using report server project in VS 2005.
but it's not possible in Report Builder.
please help me out.if not understand quesion well, please feel free to ask.
I've made a report in which there are always one tablix under each textbox. I tried to produce a document map by giving document map labels for each textbox.
Everything works fine in Report Builder (3.0), but when run in the browser (IE, Firefox) the document map doesn't seem to work: when trying to navigate with document map by clicking the labels the report runs to the end of the report - not to the textbox where it should go...
I tried to solve problem using bookmarks instead of Document map, but there similar problem occurred. Bookmarks seem to work with Google Chrome, but I need a solution that would work better in most of the browsers.
So the problem seems to be that document map label navigates to bottom of the page. Added pagebreak after each tablix worked but since the tablixes are longer than screen there's still problem - document map should be set to navigate to the top of the page.
I am new to reporting services and I'm really stuck on a design problem. Can someone please help me?
I would like to design my own print function. When a user clicks on the print icon (preferably the one that came with reporting services), the report is automatically printed twice, once with "For Person A" and the second time with "For Person B" on it. It doesn't matter where these two labels are placed on the page. These two reports need to be printed on letter-size paper regardless of user's selection. How do I do this with minimum amount of code?
Here is my code. Basically what I am doing is selecting from the database based on the current user. The ReaderResults.Text label is not showing the info pulled from the database, and the ReaderError.Text label is not showing an error. I also tried putting the ReaderResults.Text label inside the loop and that didnt work. Any suggestions? 'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true")Dim currentUserID currentUserID = Context.User.Identity.Name.ToString() Label1.Text = currentUserID Dim selectSQL As String selectSQL = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"Dim cmd2 As New SqlCommand(selectSQL, con) Dim reader As SqlDataReaderDim CompanyKey Try con.Open() reader = cmd2.ExecuteReader()Do While reader.Read() CompanyKey = reader("CompanyKey").ToString() Loop reader.Close()Catch err As Exception ReaderError.Text = "Error selecting record." ReaderError.Text &= err.Message ReaderResults.Text = CompanyKey Finally con.Close() End Try
The ReaderResults.Text is not returning a value. I am not sure what is going on because the table and all columns are full, Label1.Text shows the current username of the user loggedon, and no error is showing up in ReaderError.Text. Anyone have any ideas? Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load 'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true") 'Job1 InfoDim currentUserID currentUserID = Context.User.Identity.Name.ToString() Label1.Text = currentUserID Dim selectSQL1 As String selectSQL1 = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"Dim cmd1 As New SqlCommand(selectSQL1, con) Dim reader As SqlDataReaderDim CompanyKey 'Job1 Select Try con.Open() reader = cmd1.ExecuteReader()Do While reader.Read() CompanyKey = reader("CompanyKey").ToString() Loop reader.Close()Catch err As Exception ReaderError.Text = "Error selecting record." ReaderError.Text &= err.Message ReaderResults.Text = CompanyKey Finally con.Close() End Try
i wanna know is there a way to retrieve data from the sql database and then instead of putting it in the datagrid, can i put a specific field of data to a textbox?
i mean just a data (for example, a username where the password match the username) in a textbox.
[rsRuntimeErrorInExpression] The HeadingLabel expression for the chart €˜chart4€™ contains an error: Argument 'Length' must be greater or equal to zero.
What I am trying to do is only display the text preceding the "-" if it exists within the text otherwise just show the text as it is.
Below is code for inserting data into the database that I know works, so I thought if I replace "Insert" with "Select" I could retrieve a specific row from my database and present it in a label or text box but nothing happened. How can I retrieve a row or rows from a database using vb code and display it in a textbox? I'm using visual web developer 2008 which is similar to 2005. Thank you.
Dim UserDatasource As New SqlDataSourceUserDatasource.ConnectionString = ConfigurationManager.ConnectionStrings("ASPNETDBConnectionString1").ToString()
UserDatasource.InsertParameters.Add("username", Context.User.Identity.Name) UserDatasource.InsertParameters.Add("comments", txtSearch.Text)UserDatasource.InsertParameters.Add("points", points) UserDatasource.InsertParameters.Add("ipaddress", Request.UserHostAddress)UserDatasource.InsertParameters.Add("datatimestamp", DateTime.Now()) Dim rowaffected As Integer = 0
Try rowaffected = UserDatasource.Insert()MsgBox("Thanks for the post", MsgBoxStyle.OkOnly, "Post Executed") txtSearch.Text = ""Catch ex As Exception MsgBox("Please sign in or sign up to post comment", MsgBoxStyle.OkOnly, "Login Error") End Try
I have pie chart. In this i have to display the category group name , count as a data label. In this both category name and count should be in seperate line and should be in centre allignment. But for it is not centre allignment. In series label properties i am using this expression,=Fields!Group.Value & VbCrLf & Count(Fields!Countvalue.Value).I am geeting new line. But not in center allignment.
Hi every experts I have a exist Stored Procedure in SQL 2005 Server, the stored procedure contain few output parameter, I have no problem to get result from output parameter to display using label control by using SqlCommand in Visual Studio 2003. Now new in Visual Studio 2005, I can't use sqlcommand wizard anymore, therefore I try to use the new sqldatasource control. When I Configure Datasource in Sqldatasource wizard, I assign select field using exist stored procedure, the wizard control return all parameter in the list with auto assign the direction type(input/ouput....), after that, whatever I try, I click on Test Query Button at last part, I always get error message The Query did not return any data table. My Question is How can I setup sqldatasource to access Stored Procedure which contain output parameter, and after that How can I assign the output parameter value to bind to the label control's Text field to show on web? Thanks anyone, who can give me any advice. Satoshi
I am doing search through Date Range but didn't get correct result.
For Example if i created a Task on 5/8/2014 and when i have take Date Range from 1/8/2014 to 6/8/2014 then didn't get 5/8/2014 data in result but when i taken range from 1/8/2014 to 5/8/2014 then got the 5th Date data.
Hi, I am trying to filter data within my report by a date range (FromDate - ToDate), which is using a cube as a datasource.
My Issue: I have the filtering working ok but if i select a date which is outside the range of the data within my cube for example if i select the starting date for the range as 1/Jan/1965 but by data starts from 15/Jan/1965 then no data is returned.
Within the MDX query within the STRTOSET function i am using 'constrained' which is around the date parameter i.e. StartDate for Range.
My question is has anyone or is it possible to use date values outside of the range of the data within my cube and get a correct dataset returned. If so could you please explain how with an example.
I am trying to use the custom code in the report but I don't think I am understanding how this is being used.
I have a function to get starting months for a report parameter. The function is below:-
-------------------------------------------------------------- Shared Function GetStartingMonths() as String dim strDefault as string dim CurrentMonth as String Dim SqlString as String
'strDefault = Month(Now) & "/1/" & Year(Now) CurrentMonth = "5/1/2002" Do While CDate(CurrentMonth) <= Now SqlString = SqlString + "Select " & CurrentMonth & " as value, " & MonthName(Month(CurrentMonth)) & " " & Year(CurrentMonth) & " as MonthYear" CurrentMonth = dateadd("m",1,CDate(CurrentMonth))
if Cdate(CurrentMonth) = Now then Exit Do else sqlString = SqlString & " Union " end if
Loop
return SqlString
End Function --------------------------------------------------------------- what i am trying to do here, and hopefully produce a sql string that would fill my dataset of dates and their representation.
In the dataset, I had put the following expression =Code.GetStartingMonths()
However, I can't seem to get the parameter to display the dates. shows up as disabled in my report.
Am I doing something wrong here or is there a better way to doing this ?
Additionally, I was wondering whether there is a better SQL code that would achieve the same thing I am doing ?
In SSRS report I have 2 parameters start date and end date, so when somebody is selecting end date more than a month(if today date is 22 then they are selecting aug 23) then it should give error message to user like "Date out of range".
I need help with dates for my weekly report. Week starts on Sunday and ends on Saturday. In my view I have list of dates, how can I make a filter where dates should be within the week range. Example if I have, April 6, April 11, April 14, April 15. Week 1 should have April 6 and April 11 since week date is from April 6 to 12. Then April 14 and April 15 is for the next week. Thanks
I have a where statement that covers the date range May 4 - May 12. However, it moves or rolls out every week. Is there a way to make it moves on May 13.
I am new to reporting servies and need some help. My dataset is doing a simple select Details,amount,paidindate, from table where paidindate>=startdate <=enddate. I have done a matrix report I would like add YTD as well as amount in each month. i.e
| Month + Year | YTD Details | =amountmonth |=Amount for 01/04/year (finacial year) to displayed month
having problems doing the YTD as it need to pull a different paidindate range.
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
I want to know what the best datatype is for a situation like this e.g.if I have a field "age" and the data has a range i.e. 22-30, 31-50 etc, what is the best data type to use for this scenario. Similarly if I have a field that whereby you use a range for example 1-2 in one record but in another you get an integer value of 0 for instance, what again would be the best datatype. Many thanks
Hi Guys, Need your help on this problem. Let say table name call tbl_range and 2 field call No1 and No2 I have this set of record :- No1 No2 1000 2000 2001 3000 5000 6000
My problem, i want to check if user insert another set no No1 : 1500 No2 : 2500. So, this means that range already clash with another range. If this happened it will return 2 record (1000 - 2000) and (2001 - 3000). Can it be done and how?
I'm trying to group data by date range, but each row of data could have a different date range based on a variable.
I want to say "look at the date range the paste five orders were placed" for each row individually. As an example, think of the rows as keywords in a Search Marketing program. Keyword X had 5 orders placed in the last week, Keyword Y had 5 orders placed in the last 2 weeks. I want each keyword to display its average impressions over the course of its respective date range.
When I set a tinyint field as identity, it automatically sets the identity seed as 1. I wonder whether the increment is set to go around in loop. Say, I have the range of 256 numbers for a tinybit. So, an identifier should go from 1 to 255 and then to 0 and then back to 1. Is that right?
Hi all, I have the Following Query It is working fine if the first month is 01 and Second month is 12 but i want like this if the user selects 200103 to 200203 i want the value of composite should be added from 200103 to 200203 in one row and other row from 200203 to 200303. like this if the user selects from 200004 to 200304 i have to get 3 rows.. that is Yearly data..so how can i modify the following query or any new query.
select CONVERT(CHAR(4),period,112), sum(composite) from cdh_price_gap where CONVERT(CHAR(6),period,112) between '200101' and '200312' group by CONVERT(CHAR(4),period,112) order by CONVERT(CHAR(4),period,112)
For some reason this is just not "clicking" with me and the longer I stare at it the more I overcomplicate things and then I just confuse myself further...
Provided this relation showing where "pkey" and "skey" met on "ServiceDate":
I need to select out a list of distinct pkeys and skeys only when there was no meeting between the two in November 2005. In other words, this query would produce only one record - the starred record - when run against this sample table. This is because even though, for example, skey 124 / pkey 2 has an entry outside the desired range, it also has one inside the desired range. The same goes for the record outside our range for 123 and 2 - it also has a record inside our range.
At this point, I've come to the conclusion that I can first select all the distinct pkeys and skeys where the servicedate is not in 11/2005 then join it to a selection of distinct pkeys and skeys where the servicedate IS in the desired date range. Does that seem like the most straightforward way through this?
I don't get the impression that this is that complicated a problem, but it's one of those deals where I goofed up somewhere along the line, and now I think I'm really overthinking the problem, so I'd be much obliged if someone could give me a hearty slap to clear the ol' noggin.
