Data Region/Matrix Control Wrapping Around
Jun 6, 2007
Hello All,
In my report, I have a Matrix control placed next to a table. It renders properly and displays data aligned in two controls in Visual Studio Preview. However, when I deploy to production, it wraps the matrix control below the table, in fact puts the entire matrix control underneath the table. Why such strange behavior and not in the Preview of the report but only in Production? Any ideas how to fix this?
In VS Env. Preview --> [Table][Matrix]
In Report Svr Prod --> [Table]
[Matrix]
Thanks,
View 6 Replies
ADVERTISEMENT
Dec 25, 2007
i ran a preview of a matrix based report whose column headers are dates. The dates seem to be displaying in a somewhat (not completely) random order from left to right. How can I ensure that they display chronologically from left to right?
View 1 Replies
View Related
Dec 25, 2007
I'm consistently getting >10 minute render times in a matrix based report whose underlying query only takes 1-2 seconds to run in both RS's data tab and mgt studio. The bad render times occur in preview tab, Report Viewer and when requested from Report Manager. I believe most of the time being taken is RS's attempt to pivot and present the data.
I can run a homegrown query that pivots (with unknown number of cols) the data itself in under 4 seconds but would be concerned about mapping an unknown number of columns to a table region in RS.
The matrix I'm testing with is 67 columns across (just over 2 months of daily columns) and is supposed to be 207 rows long. There is no aggregation required by RS when it is pivoting the data because each intersection occurs at most one time in the query's result set. The number of data points actually being "bucketed" is around 13,800 values. Row headers consist of 3 columns.
RS is also cutting off the number of rows it is supposed to be showing. The number of rows cutoff seems to be 100% repeatable based on the date range chosen. RS doesnt tell me when it cuts off rows that should have been displayed. From what I can tell so far, it never cuts off columns.
The number of rows cut off seems consistent across designer's preview, report viewer and when requested thru report manager. The "run" command (exclamation icon in data tab) seems to always return the correct number of unpivoted rows, just as in mgt studio.
Are there known bugs and or limitations in RS's matrix data region feature? Are there some settings or workarounds that might make it work more to my liking?
View 13 Replies
View Related
Feb 14, 2007
can anyone help me about reporting services on how to sum the coloumn and put it on a textbox... but the case is like this,
Stud Name Fee Name Fee Amt. Amt Paid
John Doe Registration 1,000 1,000
Tuition Fee 5,000 3,500
1,500
Jane Bake Tuition Fee 5,000 5,000
SubTotal 16,000 11,000
when i aggregate the Fee Amt. using Sum function i get the result of 16,000 because john doe break his payment in to two(it should be 11,000 only). any help would be appreciated.
Thanks...
View 1 Replies
View Related
Jun 6, 2007
All,
Is it possible to Group data in a Matrix exactly similar to Table Control. For example, my table control would group data as follows:
Region Country City $ales
North America
USA
Chicago 4 MM
LA 10 MM
NYK 6 MM
Canada
Toronto 4 MM
while the matrix would display as:
North America USA Chicago 4MM
LA
NYK
Canada Toronto ...
Do you see the problem? The matrix is starting the subgroup at the same level as the parent group. How do I make a sub group start at the row below the parent group row in matrix just like in the table above?
View 5 Replies
View Related
Jan 27, 2008
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
View 5 Replies
View Related
Dec 19, 2006
Hi all,
I'm using matrix control as my reporting tools.
But i found one trouble, how can i do my matrix become like this.
Product A
Product B
Customer
Price
Qty
Price
Qty
Customer A
10
10
140
160
Customer B
12
120
120
160
Customer C
10
10
110
140
The price and qty is the static column, and i would like to make the static row also. (show in red color) but i can't.
Please help...
Thanks
Kendy
View 11 Replies
View Related
Nov 16, 2007
Hi all,
Can the matrix configure to show total rows and total columns? If yes, how?
Regards,
Farouk Yew
View 1 Replies
View Related
Jan 30, 2008
Hi,
I have a table1 which points to a dataset1
I was wondering how I use the 'data region' dropdown selection which is present when i click the properties of a cell in table1, it always appear to be blank.
I would like to know how this works as i feel it will be useful in specifying various data regions within a table, I cant seem to find any relevant information on it, can someone tell me how this works ?
View 3 Replies
View Related
May 16, 2007
Just wondering when is it preferred to use Matrix control as opposed to a table? Also, on a related note, can a table control be used for displaying information from one data set or could information coming from multiple data sets be bound to a single table in such a way that there could be logically different sections within the same table?
Thanks.
View 10 Replies
View Related
May 5, 2008
Hi Everyone. How could I configure data region ( table, matrix ) to be repeated on each report's page?
View 8 Replies
View Related
Aug 22, 2007
Hi there.
I am creating a report that the requirements need different background colors based on the row or column as shown below:
Community
Total # of Respondents
Resident's Overall Satisfaction Rating
Quality of Repair
May '07
41
3.6
5.0
April '07
14
1.8
3.0
Q2 '07
55
2.7
4.0
March '07
36
3.6
3.0
February '07
28
4.0
1.2
January '07
22
2.2
4.0
Q1 '07
86
3.3
2.7
YTD '07
141
3.0
3.2
December '06
33
3.8
4.2
November '06
27
2.6
5.0
October '06
42
1.8
3.0
Q4 '06
102
2.7
4.1
September '06
58
4.0
2.2
August '06
84
2.0
1.6
July '06
52
3.2
3.4
Q3 '06
194
3.1
2.4
June '06
40
2.4
4.2
May '06
41
3.6
5.0
April '06
14
1.8
3.0
Q2 '06
95
2.6
4.1
March '06
67
N/A
3.8
February '06
38
N/A
2.8
January '06
N/A
3.8
N/A
Q1 '06
105
3.8
3.3
YTD '06
496
2.9
3.5
Rolling 12 Month Average
477
2.9
3.3'
I can get the row colors to work great with an expression, but when I try to add the gray column with conditional formatting for the Resident's Overall Satisfaction Rating question, it clobbers my row formatting. I am thinking that I will have to do some gnarly expression in each of the rows and columns using the InScope function. Does that sound about right, or is there an easier way?
Thanks, Mike
View 1 Replies
View Related
May 24, 2007
All,
I am able to display the data in matrix, however I need to place it next to a table report item, so that the rows in table and matrix together would represent the data for same entity. In order to accomplish that, the Matrix rows need to be properly aligned with Table rows. But thats not happening. For some reason, in the Layout view they align properly, but when I Preview the report, the rows are not aligned. I have checked the cell sizes of both in the properties, they are both identical. So, I am very surprised why the Matrix row size is growing less than Table row size when the report is generated. Any ideas how to fix this?
Thanks.
View 1 Replies
View Related
Jul 9, 2007
I am trying to display hirearchical data using data region. For eg. the first level will be a list of customer names. The second level will be a list of Invoices under each customer. The third level will be a list of product names that were sold under each invoice.
I used a list for the data region and in each hireachy, there is a textbox in each list to display the data. I am trying to associate each data region with a datatable (I will provide the logic to populate the datatable with appropiate data). I do not want the ReportViewer to interact directly with a database because this is a 3 tier design and I am using the ReportViewer in local mode. I couldn't find any example of these. Can anybody help? Also I would like to see an example of the .rdlc file in these situation. Thanks very much.
Kam
View 4 Replies
View Related
Feb 1, 2007
hi everyone:
the report show two tables two matrixs
how can i control the distance between them
I want to set the same distance between the table and matrix
or (table and table )
View 3 Replies
View Related
Apr 10, 2006
When I created a Table control, I was able to read things like .Color, FormattedValue, etc. from SSAS. This was great, because I could control all existing and future reports' formatting via one change in the cube.
Now, I've decided that a Matrix control is superior for various reasons. However, I notice that I MUST apply an aggregate function to get a cell value...well, it appears that this means there's no longer any way for me to read my SSAS formatting.
I tried =First(Fields!DataValue.FormattedValue), =Max(...), etc.
I also tried it with the color property, etc. Nothing worked.
Are there any workarounds? I'd hate to embed the formatting into each of my 40 reports, because the user is likely to change his/her mind after the fact.
Thank you,
Bert
View 1 Replies
View Related
Jul 28, 2007
Hi All, Would appreciate some assistance with the attached, I'm using some fairly complicated recordsets (ASP VBScript) for a property search website, I have a page where a user selects search by County this in turn takes them to a page which lists all the towns in the county and number of live properties in each, I'm using 4 recordsets for this - 3 of which list the towns (townsA2I, townsJ2R & townsS2Z) the 4th is a Property Count, examples of the recordsets are below (using townsAtoI and LiveProperties -
TownsA2I
<%
Dim TownA2I
Dim TownA2I_numRows
Set TownA2I = Server.CreateObject("ADODB.Recordset")
TownA2I.ActiveConnection = MM_recruta2_STRING
TownA2I.Source = "SELECT towncountyID, Town, County FROM dbo.easytolettowncounty WHERE Town LIKE 'A%' AND County = '" + Replace(TownA2I__MMColParam, "'", "''") + "' OR Town LIKE 'B%' AND County = '" + Replace(TownA2I__MMColParam1, "'", "''") + "' OR Town LIKE 'C%' AND County = '" + Replace(TownA2I__MMColParam2, "'", "''") + "' OR Town LIKE 'D%' AND County = '" + Replace(TownA2I__MMColParam3, "'", "''") + "' OR Town LIKE 'E%' AND County = '" + Replace(TownA2I__MMColParam4, "'", "''") + "' OR Town LIKE 'F%' AND County = '" + Replace(TownA2I__MMColParam5, "'", "''") + "' OR Town LIKE 'G%' AND County = '" + Replace(TownA2I__MMColParam6, "'", "''") + "' OR Town LIKE 'H%' AND County = '" + Replace(TownA2I__MMColParam7, "'", "''") + "' OR Town LIKE 'I%' AND County = '" + Replace(TownA2I__MMColParam8, "'", "''") + "' ORDER BY Town ASC"
TownA2I.CursorType = 0
TownA2I.CursorLocation = 2
TownA2I.LockType = 1
TownA2I.Open()
TownA2I_numRows = 0
%>
LiveProperties
<%
Dim LiveProperties
Dim LiveProperties_numRows
Sub sLivePropertyCount(vLocation)
vCount=0
Set LiveProperties = Server.CreateObject("ADODB.Recordset")
LiveProperties.ActiveConnection = MM_recruta2_STRING
LiveProperties.Source = "SELECT COUNT(PropertyID) As NumberofProperties, propertylive, propertylocation FROM dbo.easytoletproperty WHERE propertylive = 'y' AND propertylocation = " & vLocation & " GROUP BY propertylocation, propertylive"
LiveProperties.CursorType = 0
LiveProperties.CursorLocation = 2
LiveProperties.LockType = 1
LiveProperties.Open()
vCount=(LiveProperties("NumberofProperties"))
Response.write(vCount)
LiveProperties.Close()
Set LiveProperties = Nothing
end sub
LiveProperties_numRows = 0
%>
I've tried following the tutorial here http://www.webthang.co.uk/tuts/tuts_dmx/rob9/rob9.asp but when i review the page i get the following error -
"Microsoft OLE DB Provider for SQL Server error '80040e14'
Invalid column name 'Barnet'.
/PropertiesbyTown1.asp, line 338 "
Where line 338"
Where line 338 is the "LiveProperties.Open()" of the above recordset, when i try to view bindings on this recordset Dreamweaver gives me the following errors -
"Column 'dbo.easytoletproperty.propertylive' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause.
Column 'dbo.easytoletproperty.propertylocation' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause."
I would appreciate any assistance -
View 1 Replies
View Related
Mar 20, 2008
Hi all
I have taken Marix control in my report,But i am unable to increse Rows and cols.
How can i make it?
Reagards.
View 1 Replies
View Related
Jul 27, 2007
I have deleted the entry
<RenderingExtension>HTMLOWC</RenderingExtension>
from the rsreportserver.config file
but I still can't see HTML OWC in the export drop down.
what else do I need to do?
View 1 Replies
View Related
Feb 4, 2008
I need to design a report like as below
Location jan feb mar april total %
abc 1 2 1 1 5 % calculated value
ddd 1 1 1 1 4 % calcualtedvalue
------------------------------------------------------------------------------------------------------
total 2 3 2 2 9 total(%calculated value)
i was able to get everything except last column. i am using Matrix control. can any one help me how to another column after sub total in matrix control.
View 3 Replies
View Related
Jan 9, 2008
I have a report which produces invoices.
These invoices are more complex than your average ones.
The invoice is for one customer but many orders. Within the invoice, orders are grouped together by their delivery address which can be different for each order within the invoice. I throw a page for each seperate delivery account and sub-total by delivery account too. All this works fine and page breaks are all OK. However I also need a summary page at the end of the invoice showing 1 line per delivery account andf the sub-total for it, then I show a grand total.
To achieve this, I used a list control, grouping on Invoice number. within it I placed 2 tables. 1 is the main Invoice table, the 2nd is the summary table. I have a page break on a group in table 1 that controls the split on delivery account. I have a page breaks on table 2. Again this all works fine and paging is perfect.
Here's the crunch though! If the invoice only contains one delivery account, I need to suppress the summary table. This I can do BUT I still get the page throw for it, effectively giving blank pages. The page break is triggered regardless of whether the containing control is visible or not.
I'm pretty accomplished with RS and I've tried all sorts of tricks and hacks to get round it but it seems a page break is added regardless of whether the control triggering it is visible or not!
I've tried rectangles both with the table in it and outside. And with the page break on the rectangle and when that didn't work , on the table inside it.
Any one else have any ideas on this.
Cheers
Chris
View 6 Replies
View Related
Apr 11, 2008
I've never attempted to use the "Repeat Report Item with Data Region on Every Page " feature before. I'm trying to use it on text boxes with the data region being a matrix. I have a report that is two pages, and the text boxes are only appearing on the first page. Also, the matrix is appearing with zero space between it and the header. Any ideas?
Lindsay
View 1 Replies
View Related
Oct 29, 2007
hii
Everybody
In my report i have a matrix,but i want to show only 10 columns in one page and rest of the data should come in next page?
so is there anyway to control the number of columns in a matrix to be shown in the priview?
please help me with some suggestions.
its orgent
thanks in advance
Mahasweta
View 1 Replies
View Related
Oct 20, 2015
I have a matrix report:
My Expression in the data fields inside design mode is:
IIF(Fields!Row_num.Value mod 2 ,"White","LightGrey")
I am using a Dense rank Function at the dataset level in order to group id column wise. So Fields!Row_num.Value comes from that set.
Earlier it was BLANK values: Please see below for reference.
Tried IsNull on SQL Server already and does not work because there are no NULLs in the data I am retrieving. The empty cells happen when the matrix creates the crosstab report - where there is no data for a column. Everything else works well except the BLANK values being not colored as you see in the screen shot, im using ISNOTHING function to achieve those 0's if NULLS inside the report. But though we have a value inside the cell coming from report it does not colour the entire group.
My requirement is coloring the entire column group irrespective of the NULLs' or Blanks.
Have also tries several functions, but of no use. I am missing with a tiny thing I guess which I am unable to figure out.
Other Functions Tried:
=IIF(VAL(ReportItems!ROWCOLOR.Value) MOD 2,"WHITE","LightGrey")
=iif(RunningValue(Fields!City.Value,CountDistinct,Nothing) Mod 2, "LIGHTBLUE", "SILVER")
=iif(RunningValue(Fields!DQLogDateTime.Value,CountDistinct, Nothing) MOD 2, "LightGrey","White")
View 3 Replies
View Related
Aug 18, 2015
I pull data from Sql Server through the  query, I want to pass the region parameter to the power pivot connection query. So that I can automatically pull the required region data.  The parameter should pick the value from the excel range. And also how to control this through VBAÂ
View 4 Replies
View Related
Apr 29, 2015
I have a pivot table that connects to our data warehouse via a PowerPivot connection. Â The data contains a bunch of comment fields that are each between 250 and 500 characters. Â I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Â Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. Â This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
View 2 Replies
View Related
Oct 18, 1999
I am using Enterprise Manager to generate a script of the stored procedures on my database. Under File|Options, I selected Windows Text(ANSI). The file which is generated contains all stored procedures, but there are some procedures which are so long that they wrap to the next line.
When I then try to run this script from ISQL in a batch file, those procedures which wrap error out. Is there any way to generate the script in a more formatted manor, avoiding the wrapping?
View 1 Replies
View Related
Jul 27, 2007
In some text boxes within the table header, I want to force the text to wrap. This would be comparable to using Alt+Enter in Excel. For example, the text box may read like this...
Customer
Install Date
but I want it to look like this...
Customer
Install
Date
Thanks.
View 4 Replies
View Related
Oct 12, 2007
I have a report that contains a table. I would like the table to wrap to a second column on the report page to decrease the number of pages the report spans. Is there a way to tell the table to span to the second column before going onto the next page?
Thanks,
Kaysie
View 3 Replies
View Related
Mar 13, 2008
I'm expecting to revamp some stored procs so that their selects are executed on a dynamic string that always returns the same columns but varies the sources.
I'm concerned that the bread and butter of products like RS and SSIS is the ability to predict what columns, and what column types to expect from a query, but that introducing dynamic sql will complicate using them.
I'm motivated not to use temp tables or table vars if possible. I'm also somewhat motivated to learn of a solution that works equally well in 2000 and 2005.
I've tried wrapping dynamic calls in a select as shown below but to no avail...
After€¦
declare @sqlString nvarchar(4000)
set @sqlString = 'select * from [' + @dbName + '].[dbo].[activity]'
I€™ve already tried things like€¦.
select a.* from exec sp_executesql @sqlString a
and
select * from exec (@sqlString)
View 8 Replies
View Related
Sep 3, 2015
I am using FOR XML to generate the HTML and following is my query. I am using td { white-space:nowrap;} for the columns to used no wrap. But i want two columns which need to be wrapped. i have tried lots of options.
SET @tableHTML =
N'<H3><font size="4"> Board - Items </font></H3>' +
N'<table border="1" ><font size="1"> <head><style TYPE="text/css"> td { white-space:nowrap;} </style> ' +
N'<tr bgcolor=#4b6c9e><font size="2" color=white><th> ID</th>
<th> A</th>
<th> B </th>
[Code] ...
From the above code i want G and H columns to be wrapped.
View 3 Replies
View Related
Jul 23, 2005
I have a query batch "update" script that upgrades my users database from,say version 0 to version 1, or from version 1 to version 2. I would like toknow how I can wrap the entire script in a transaction, so that either thewhole thing succeeds or none of it does.For example:BEGIN TRANSACTION.......... Alter some tables.....GO.......... Alter a stored procedure.....GO.......... Create a new stored procedure.....GOCOMMIT TRANSACTIONorROLLBACK TRANSACTIONGO(how do I get to the "ROLLBACK TRANSACTION" if an error occurs in the updatescript?)
View 2 Replies
View Related
Mar 26, 2008
Hello I was very happy to have found the thread http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=491642&SiteID=1 that explained how to get the text to display Bottom-to-Top/Left-to-Right.
The solution was to setup a function that creates a bitmap the text to be displayed.
This works well and correctly displays the text image in HTML and PDF. (Excel, XML and CVS won't export backgroud images).
To extend the solution to wrap text it requires a few additional lines...
Code Snippet
Function LoadImage3(ByVal stText As String)
stText = stText.PadRight(10)
stText = stText.PadLeft(10)
Dim iMaxLength as Integer = 180
Dim iMaxWidth as Integer = 180
Dim f As Drawing.Font = New Drawing.Font("Arial",7, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point)
Dim bmpImage As New Drawing.Bitmap(1, 1)
Dim MyGraphics As Drawing.Graphics = Drawing.Graphics.FromImage(bmpImage)
Dim imageSize As Drawing.SizeF = MyGraphics.MeasureString(stText, f)
Dim i As New System.Drawing.Bitmap(iMaxWidth, iMaxLength)
Dim g As Drawing.Graphics = Drawing.Graphics.FromImage(i)
Dim rectF1 As New Drawing.Rectangle(-(iMaxWidth/2),-(iMaxLength/2),iMaxWidth,iMaxLength )
g.FillRectangle(Drawing.Brushes.White, 0, 0, i.Width, i.Height)
g.TranslateTransform((iMaxWidth/2), (iMaxLength/2) )
g.RotateTransform(270.0F) 'flip the image 270 degrees
g.DrawString(stText, f,Drawing.Brushes.Black, rectF1)
g.DrawRectangle(New Drawing.Pen(Drawing.Color.White, 1), rectF1)
g.Flush()
Dim stream As IO.MemoryStream = New IO.MemoryStream
Dim bitmapBytes As Byte()
i.Save(stream, System.Drawing.Imaging.ImageFormat.Jpeg) 'Create bitmap
bitmapBytes = stream.ToArray
stream.Close()
i.Dispose()
Return bitmapBytes
End Function
Items highlighted in yellow reflect changes made to orignal solution.
Hope this helps!!
View 1 Replies
View Related
