Data Roll Back ?, If Replication Is Interupted
Jun 5, 2008what will happen if power breaks down during replication. Did the replicated data be rolled back ?
If data is not rolled back then how to roll back ?
what will happen if power breaks down during replication. Did the replicated data be rolled back ?
If data is not rolled back then how to roll back ?
Hi, all.
I make a db replacated as distributor.
I decided later removing replication.
But, I don't know how to remove rowguid column from all tables.
How can I set back to the initial state of DB before replication?
thank you..
I wrote a stored procedure. It work properly.
But I want to catch if any error occurs while executing it. And I want to make roll Back on error .And send the error OUTPUT
How can I roolBack the command below and How can I send the error over OUTPUT parameter?
execute(@cmdS)
Thanks.
Hi,
I'm using data flow as flat file source -> derived column ->Data Conversion-> oledb destination
I have a fifty thousand record in a delimited file. while processing i got error in 45000th row. In database only 40000 records are there(why is there no all 45000 records). Is there any way to roll back all the 40000 records.
Hi,
I have an application that allows users to synchronize SQL CE data with the server. I would like to implement the functionality wherein if the synch process hits an error, the whole synchronization rolls back.
Is it possible to roll back the Synchronization process? I am using Merge replication over web in the application.
Thanks
Hello, I do not know how to implement transaction roll back in asp.net application. I am using SqlHelper class to communicate with my sql db.Thanks, junior
View 1 Replies View RelatedHi,
i wanna know how to use rollback in sql server without actually using transaction...
is there any way i can do that?
thanx in advance
Hi,
I'm planning to install the cumulative hotfix (build 2187) on my sql 2000 clustering server (SP4, 2040). And I would like to know if the cumulative hotfix is able to roll back. If possible, please provide me any information about that. Thanks in advance.
hey guys
i need help urgently
i just ran an update statement without a where statement by mistake
and i need to rollback this changes
i;m runnning sql express sp2
and the database is set to recovery model simple
i hace the mdf and ldf file
the mdf is 1.5 gb ledf is 65 mb and the last changed date is the same time i ran the update statement
so i think the changes are there in the ldf file but i just need to roll back to 1 minute b4 i run the update
plz helpppppppppppp
thx in advance
My question is how to get IDENTITY_INSERT Incriment Primary Key ID roll back when the application fails.
Using TransactionScope with single connection in DataObject. I am trying to insert row in two dataTable using its own tableAdapter (two tableAdapter).
I have Product table with ProductID primary key with incriment identity. and that ProductID is used to insert row in ProductHistory Table. Lets say Product table has the last ProductID=8 (8 rows) and the next ProductID will be 9.
When I insert row in both table and if the second table insert fails both gets roll back (which is good). but when I insert again another time the Product ID=10 not 9. Is there any way to roll back the ProductID in Product table so when i insert next time it has incriment number instead of gap.
I have a script contains multiple statements to update multiple tables. How can I make sure that either all statements get executed successfully or no changes apply to the tables (in case one or more errors occur)? I've been searching on Internet and it seems like I need to use Rollback and begin transaction.
View 5 Replies View RelatedHi,
I followed Remus' post about not doing 'fire and forget'.
I have two queues, ProcessingSendQueue and ProcessingReceiveQueue.
Once i receive from ProcessingReceiveQueue, activation SP gets called on ProcessingSendQueue and ends conversation.
However,if I then get an exception, the action of the activation SP ( ie the ending of the conversation ) does not get rolled back... is this possible? I would have thought that the action of the activation SP would get rolled back too.
My ProcessingSendQueue activation SP is as follows:
ALTER PROCEDURE [dbo].[ProcessingSendQueue_AP]
AS
BEGIN
DECLARE @dh UNIQUEIDENTIFIER;
DECLARE @message_type SYSNAME;
DECLARE @message_body NVARCHAR(4000);
RECEIVE @dh = [conversation_handle], @message_type = [message_type_name], @message_body = CAST([message_body] AS NVARCHAR(4000))
FROM [ProcessingSendQueue];
IF @dh IS NOT NULL
BEGIN
IF @message_type = N'http://schemas.microsoft.com/SQL/ServiceBroker/Error'
BEGIN
RAISERROR (N'Received error %s from service [ProcessingReceiveQueue]', 10, 1, @message_body) WITH LOG;
END
END CONVERSATION @dh;
END
END
Goofed up and ran an update query. It messed up all the data in a single table. I'm trying not to restore the table from a previous backup since the backup is more than 20 GB. It's going to take forever to restore it. Any advice would be much appreciated!
Thanks!
Charles.
Hello,
I'm Designing sql server 2005 SSIS Packages.
According to my requirment i have a sequence container. It has few data flow task, on success of one next one is running. If any one of them get failed then it should roll backed all the transaction. Each Data flow task transfering a data from one server to another server in similar table.
Thanks.
Hello,
I was reading articles about database replication and found that one important point was that users can continue their work during replication unlike back-ups where they would have to log off.
Question:
Is replication done on servers as well as databases?
How different or better is it over back-ups?
Lastly, is database dump better than database replication?
Is there a link that I can access which might answer these qustions?
Thanks in advance!
sqlnovice123
Hi all :
I hope this is an easy one for some of you - this is the scenario :
1) I have an Access Application that has been upsized to SQL
2) We are now replicating it with a second office
3) When we started doing the Merge Replication, the ROWGUID was added to each table
4) When we attempt to add a new record to the table, it allows us to add 3 fields, then the record 'jumps' to the indexed location of the ROWGUID
5) The 'jump' is undesirable as we then have to resort the table by key and finish its input.
5) We have our own primary identity field that SQL seems to be ignoring.
Any help would be really great
Hi,
I am monitoring my replication process and I have a problem with the loop detection, I can see origined transacctions in the server, executed in the same for the replication.
The subscriptions configuration is sp_helpsubscription
exec sp_addsubscription @publication = N'PUBLICATION',
@article = N'all',
@subscriber = N'192.168.0.23',
@destination_db = N'PRUEBABD',
@sync_type = N'none',
@update_mode = N'read only',
@offloadagent = 0,
@dts_package_location = N'distributor',
@loopback_detection = 'true'
GO
I need for help.
Can I roll back certain query(insert/update) execution in one page if query (insert/update) in other page execution fails in asp.net.( I am using sqlserver 2000 as back end)
scenario
In a webpage1, I have insert query into master table and Page2 I have insert query to store data in sub table.
I need to rollback the insert command execution for sub table ,if insert command to master table in web page1 is failed. (Query in webpage2 executes first, then only the query in webpage1) Can I use System. Transaction to solve this? Thanks in advance
We had a siutation last night in our production environment that forced us to revert back to an earlier version of the database (before a major code rollout that failed). After restoring the days full backup (with NORECOVERY), and then restoring a DIFF backup (FULL RECOVERY and had checked Preserve Replication Settings)...the transaction replication failed.
Message #1
The replication agent has been successfully started. See the Replication Monitor for more information.
Message #2
2011-03-04 15:07:17.566 Copyright (c) 2008 Microsoft Corporation
2011-03-04 15:07:17.566 Microsoft SQL Server Replication Agent: logread
2011-03-04 15:07:17.566
2011-03-04 15:07:17.566 The timestamps prepended to the output lines are expressed in terms of UTC time.
2011-03-04 15:07:17.566 User-specified agent parameter values:
[code]....
I've tried reinitializing the publication/subscription and while that took brand new snapshots and copied it over to the replicated data server, it did not fix the problem.I read from a different post that I could try running "sp_replrestart" but that ran for about a half an hour and didn't appear to do anything but fill up our log files...did I not wait long enough?
The only thing I know to do at this point is to drop the publication on the production server and rebuild it completely (and with all the tables we're replicating that would take quite a bit of time.
Hello,I'm trying to create a simple back up in the SQL Maintenance Plan that willmake a single back up copy of all database every night at 10 pm. I'd likethe previous nights file to be overwritten, so there will be only a singleback up file for each database (tape back up runs every night, so each daysback up will be saved on tape).Every night the maintenance plan makes a back up of all the databases to anew file with a datetime stamp, meaning the previous nights file stillexists. Even when I check "Remove files older than 22 hours" the previousnights file still exists. Is there any way to create a back up file withoutthe date time stamp so it overwrites the previous nights file?Thanks!Rick
View 5 Replies View RelatedNew to Database Mirroring and I have a question about the Principal database server. I have a Database Mirroring setup configured for High-safety with automatic fail over mode using a witness.
When a fail over occurs because of a lost of communication between the principal and mirror, the mirror server takes on the roll of Principal. When communication is returned to the Principal server, at some point does the database that was the previous Principal database automatically go back to being the Principal server?
I need to run two reports each of A5 Size to run back to page and print on single A4 paper means in 1st half Sale bill will be printed and in second half Gate Pass Will Be Printed both report will be on same page and size and shape should be maintained. How to do it.
View 4 Replies View RelatedHere after the Union, the col. WWDTA should have data but its' coming back blanks, but all cols are aligned. why is this?
SELECT
ALL T01.OHORD#, T01.OHSLR#,T01.OHORDT, T01.OHORDD,
T01.OHTTN$, '' as WWDTA
FROM ASTDTA.OEORHDOH T01,
ASTDTA.OETRANOT T02
WHERE T01.OHORD# = T02.OTORD#
[Code] ....
I the following report with one group:
Month Number of Sales Total Sales
+ Jan 2007 100 $1,000.00
When you dril down on MonthYear you get the detail data:
Month Number of Sales Total Sales
- Jan 2007 10 $610.00
1 $10.00
1 $20.00
1 $30.00
1 $40.00
1 $50.00
1 $60.00
1 $70.00
1 $80.00
1 $100.00
1 $150.00
My question is. I added a filter to the detail data to give the Bottom % =75 of sales. So My detail data only displays the following rows:
Month Number of Sales Total Sales
- Jan 2007 10 $610.00
1 $10.00
1 $20.00
1 $30.00
1 $40.00
1 $50.00
My problem is the group still displays the total of my dataset (as seen above), but I want it to display the total of the detail data group, like below:
Month Number of Sales Total Sales
- Jan 2007 5 $150.00
1 $10.00
1 $20.00
1 $30.00
1 $40.00
1 $50.00
If I change the fields in the group to look at the detail data ,for instance =count(Fields!NumberofSales.Value,"Details_Group") I get an scope error.
How can I display the totals of the detail data in the parent group after I added a filter to the detail data?
Hi
I have a situation where i need to insert or update the data from a flat file to a sql server database. The flat file contains nearly one lakh records.
I am using transactions. If all the rows are inserted or updated successfully i am commiting. If there is any error i am rollbacking the transaction.
when rollbacking the transaction it is taking more than 3 to 4 hours.
Can any one suggest me how to do that in batches?
Thanks in Advance
i have a table Animals with column names id and Name eg1 Tiger2 Lion3 Elephant4 Cheetah5 Zebra i want the order to be anything of my chossing when i select from it. eg how could i get it to display results in this order (when i do select * from Animals): CheetahElephantZebraTiger Lion Thanks
View 4 Replies View RelatedHello, I am trying to pull run this sql statement but it's bombing out at the comm.ExecuteNonQuery();. ..
Could someone help me figure this out..
Ex.System.Int32 bum = System.Convert.ToInt32(Request.QueryString["dum"]);
SqlConnection conn = new SqlConnection("Data Source=**********************");SqlCommand comm = new SqlCommand();
comm.Connection = conn;SqlDataAdapter myadapter = new SqlDataAdapter(comm);DataSet myset = new DataSet();
conn.Open();
comm.CommandText = "Select * from Order_Forms where (Order_Num = " + Session["dum1"] + " ) ";
comm.ExecuteNonQuery();myadapter.Fill(myset, "Order_Forms");
myset.AcceptChanges();
Can yo usee the problem???
l would like to select TODAYS data USING GETDATE() and 60 days back on a daily basis BASED ON CURRENT DATE.
How do l do this using datediff ?
Select
DateTokey
From test
Where DateTokey = Getdate()
And YEAR(DATEADD(DD,DateDiff(m,Getdate(),DateTokey),'1 900-01-01 00:00')) = 3 ---
This is probably a dumb question.. but here goes.
I'd like to make a copy of several tables before changes are made to them so that I can 'roll back' if necessary.
What I 'thought' i could to was this:
select * into mytable_temp from mytable
and then to roll back..
truncate table mytable
Select * into mytable from mytable_temp
When I try and select back into my original table, it says I can't because the object already exists.. What is a better way to accomplish this????
hi,
is it possible to get the back up of a particular database automatically at fixed interval of time i.e for every two days or two hours etc. i am sql server 2005 as back end of my project. please show me a way in sql express edition too along with sql sever edition.
One can never consent to creep,when one feels an impulse to soar
RAMMOHAN
Hi all,
We have merge replication set up between 2 instances of SQL 2005 through web synchronization. I was wondering is it possible if the subscriber adds data at their end can we selectively edit what data gets uploaded back to the publisher? Will this work if I add a filter to the appropriate article at the publisher or will that only limit what goes down to the subscriber rather than vice-versa?
Also, could we set up web sychronization if the publisher had no direct access to the IIS server (ie. was not on the same network, available only through port 80, 443)?
Thanks,
Iain
I'm new at this so I apologize in advance for my ignorance.
I'm creating a website that collects dates in a calendar control (from Peter Blum). When the page containing the control loads it populates the calendar with dates from the database (that have previously been selected by the user). The user then can delete existing dates and/or add new dates.
I create a dataset when the page loads and use it to populate the calendar. When the user finishes adding and deleting dates in the calendar control I delete the original dates from the dataset and then write the new dates to the dataset. I then give execute the data adapter update command to load the contents of the dataset back into the database. This command involves using parameterized queries. For example the Insert command is:
Dim cmdInsert As SqlCommand = New SqlCommand("INSERT INTO Requests VALUES(@fkPlayerIDNumber, @RequestDate, @PostDate, @fkGroupID)", conn)
cmdInsert.Parameters.Add(New SqlParameter("@fkPlayerIDNumber", SqlDbType.Int))
cmdInsert.Parameters.Add(New SqlParameter("@RequestDate", SqlDbType.DateTime))
cmdInsert.Parameters.Add(New SqlParameter("@PostDate", SqlDbType.DateTime))
cmdInsert.Parameters.Add(New SqlParameter("@fkGroupID", SqlDbType.Int))
da.InsertCommand = cmdInsert
The update command is:
da.Update(ds, "Requests")
When I run the program I get the following error:
Parameterized Query '(@fkPlayerIDNumber int,@RequestDate datetime,@PostDate datetime,' expects parameter @fkPlayerIDNumber, which was not supplied.
I've used debug print to establish that the table in the dataset contains what it should.
I would be more than grateful for any suggestions.
Hi
I am trying to recover a set of tables with data that was dropped. This data was not backed up. Please advice, is there any way this data can be recovered.