Hello,
Consider the following string:
EHILLIS /CGROGAN
How would you clean that up to produce the following result:
EHILLIS /CGROGAN
I have tried a couple of things with REPLACE, but nothing has worked. The name of the column is 'Rep'.
Any ideas?
Thank you for your help!
cdun2
I dont know if anyone else uses this, but I'm trying to scrub a database on my dev server. The procedure is called uspScrubDatabase. When I execute this I get an error message:
Server: Msg 201, Level 16, State 4, Procedure uspScrubDatabase, Line 0
Procedure 'uspScrubDatabase' expects parameter '@ErrorCode', which was not supplied.
The guy that usually does this is on vacation so I have no one to ask.
Can anyone assist?
Thanks.
I can only assume that I either did something very stupid, the examples are completely wrong, or I don't have the slightest clue what it is that I'm doing.
I'm trying to do one of those incredibly complicated things in SSIS that was a brain-dead, point click operation in DTS. I want to strip characters out of an input stream from a flat file source before loading them into a table. I've defined my data flow task. I have my flat file source properly defined. I have my SQL Server destination properly defined. For the life of me, I can't figure out how to scrub the data that I want.
My input is a csv file that has 22 columns of data. Column 22 contains data and if data was not present, there is a - inserted. So, I want to strip any - from the input before it goes into the column. So, I grabbed a derived column task and drug it out on the surface of the designer. I then set the derived column name to Column 22, the derived column to 'Replace Column 22', and tried the following in the expression section:
REPLACE(Column 22, "-", "" )
REPLACE( (DT_WSTR, 50) Column 22, "-", "" )
Both of these threw some really nasty error messages when I clicked the OK button. The really irritating part is that I exactly followed the examples in BOL.REPLACE(Product, "Bike","")REPLACE((DT_WSTR,8)DaysToManufacture,"6","5") I know I'm not dreaming this, but it absolutely refuses to accept my expression.
Hi All,
I am new to SQL Server. I want to know what is data scrubbing (data cleaning). What are the different tools that can be used for data scrubbing.
Where can i find good tutorial or data for data scrubbing?
Thanks
I have a million record mainframe flat file that I BULK INSERT into aSQL table with CHAR(fieldlength) deined for every column to preventimport errors.Once imported I "INSERT INTO ... SELECTdbo.MyScrubFunction(columnN),..."My scrub functions will take for example a char(8) YYYYMMDD date fieldand return either a valid datetime variable or a NULL for 8-spaces or8-zeros....or return a MONEY datatype by dividing by 100.PROBLEM: This is extremely SLOW!QUESTION: Should I do multiple "UPDATE ...SET" statements back intoCHAR() columns, then let SQL Server do the CHAR() to DATETIME andMONEY conversions itself? What is the most efficient or recommendedmethod to transform/scrub imported data?P.S. I also have to convert low-values and reformat dates which Ialso use my own UDFs for.THANKS
View 1 Replies View RelatedHi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
I have used both data readers and data adapters(with datasets) in the projects that I have worked on. I am trying to get some clarification on when I should be using which one. I think I am doing this correctly but I want to be sure I am developing good habits.
As the name might suggest, it seems like a datareader is for only reading data. I have read that the data adapter and dataset are for a disconnected architecture. Or, that they can be used for this type of set up. I have been using the data adapter and datasets when writing to a database and the datareader when reading from a database.
Is this how these should be used? Is the data reader the best choice for reading data? Am I doing this the optimal way from a performance stand point?
......................................................thanks in advance
We already integrated different client data to MDS with MS Excel plugin, now we want to push back updated or new added record to source database. is it possible do using MDS? Do we have any background sync process to which automatically sync data to and from subscriber and MDS?
View 4 Replies View RelatedWhen I enter over 4000 chars in any ntext field in my SQL Server 2005 database (directly in the database and through the application) I get an error saying that the data could not be updated because string or binary data would be truncated.Has anyone ever seen this? I cannot figure out what is causing it, ntext should be able to hold a lot more data that this...
View 7 Replies View RelatedI have a requirement to implement CDC for 50+ tables to implement incremental data changes warehouse/reporting rather than exporting the whole table data. The largest table is having more than half a billion records.
The warehouse use a daily copy of OLTP db (daily DB refresh). How can I accomplish this. Is there a downside in implementing CDC just for the sake of taking incremental changes on the tables?
Is there any performance impact if we enable CDC on OLTP db?
Can we make use of the CDC tables on the environment we do daily db refresh so that the queries don't hit OLTP database?
What is the best way to implement CDC to take incremental changes for reporting.
Hi,This is driving me nuts, I have a table that stores notes regarding anoperation in an IMAGE data type field in MS SQL Server 2000.I can read and write no problem using Access using the StrConv function andI can Update the field correctly in T-SQL using:DECLARE @ptrval varbinary(16)SELECT @ptrval = TEXTPTR(BITS_data)FROM mytable_BINARY WHERE ID = 'RB215'WRITETEXT OPERATION_BINARY.BITS @ptrval 'My notes for this operation'However, I just can not seem to be able to convert back to text theinformation once it is stored using T-SQL.My selects keep returning bin data.How to do this! Thanks for your help.SD
View 1 Replies View RelatedI'm using Script Component to load data into Oracle DB due to the poor performance issue. Now, I found it will missing some data during the transmission. Please see the screenshot below:Â
SQL Server：
Oracle:
DDL:
create table Person
(
BusinessEntityID Integer,
FirstName nvarchar2(50),
MiddleName nvarchar2(50),
LastName nvarchar2(50)
);
Result:
I follow up this article:Â [URL] ....
VB Script:Â
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
[Code] ..........
Hi all, i got this error:
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
Thanks
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
is there a step by step paper to get there? here is what i need to consider. I Iwill have many customers that will need their own set of records and access pages "branded for their company" each customer will have many clients. I am hosting this application on a windows 2003 server with SQL 2005 server enterprise.
I am using windows authentication, I have created a username in windows, then i added the windows user in SQL management studio in security, granted "DB Read" and "DB write" and again under the database security tab. still from the web authentication fails. i must be nissing a step or two?
I expect to set up a username for each database as i setup new customers.
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
I setup this package to import data from a Sharepoint list to a SQL Server data table. The primary key of my SQL table is mapped to the Title column of my Sharepoint list. There is a possibility that duplicate values will be entered in the Title field of the Sharepoint list. So when importing data into my table via SSIS, my package always error-out when there it comes across duplicate values. how you others have managed data integrity when importing from a Sharepoint list with the Title column being mapped to the primary key of a table.
View 4 Replies View RelatedHello,
I am wondering what conversion rules apply, when a string, which contains a number, is saved to a SQL Server 2005 into a column of type decimal.
This is the code I€™m using (C++):
CString cValue = "0.75"
_variant_t vtFieldValue;
vtFieldValue = _variant_t(cValue)
pRecordSet->Fields->Item["MyColumn"]->Value = vtFieldValue;
"pRecordSet" is an ADO recordset. The database column "MyColumn" is of type "decimal(19,10)".
The most important question for me is, if the regional settings of the database server or the regional settings of the client PC are considered during the conversion from the string to the decimal value. For example in standard French regional settings the "." would not be recognized as decimal separator.
I am also wondering if the language of the database instance, in which this data is saved, is considered during this conversion or any other settings of this database instance.
So my general question is: Does anybody know exactly what rules apply during the above mentioned conversion?
Thank you for your help.
Regards,
Volker
I've question about how to handle structural datamodel changes in a datasource of PowerPivot. Suppose I'm developing a starmodel in SQL Server and sometimes a datatype changes or a name of a field changes in a table. It seems to me that PowerPivot handle this not gracefully as Analysis MD does (mostly). I received an error because of a wrong fieldname or even no error when a dattype changes in PowerPivot. Is this common or do I something wrong here. Does this mean that every time the datamodel changes the PowerPivot should be recreated? Or am I missing the clue here?
View 6 Replies View RelatedHi everyone,
I have to extract, dayly a list of contacts on a exchange server in a table on our EDW on sql server 2005. Is it possible to get the information directly from a dataflow or i will have to developpe a script task ?
Need help desperatly !!!
I am getting ErrorCode 8 while loading the data from stage to model. I have checked my error view it states that "Member Code is Inactive".
Initially I have loaded same set of data in Model from MDS Stage table but then deleted with ImportType = 5 which removed all the data from the MDM model.
Now i want to load it back but its giving the Error Code 8 .. Before loading the same data i have changed the stage table Importtype to 2 and Importstatusid to 0.
Hello,
I have noticed that for one of my data-flows, the process is really long during the phase "the final commit data insertion has started".
To be accurate, the process is fast until it reaches this phase. It happens often when I load millions of lines.
The extraction is done from a database SQL Server 2005 to a database SQL Server 2005, on the same server (with the SQL Server native provider).
I used a SQL Server destination but I have tried with an OLE DB destination and it is the same situation.
Why the process could be so long during this phase?
There is a way to optimised my package to avoid that?
Any idea is welcome.
Thanks.
Guillaume
HiI'm having problems following the tutorial on creating a data access layer - http://www.asp.net/learn/dataaccess/tutorial01cs.aspx?tabid=63 - when I try to compile in Visual Studio 2005 I get namespace could not be found. I followed exactly the tutorial - I created a dataset and added this code in my aspx page. <asp:GridView ID="GridView1" runat="server" CssClass="DataWebControlStyle"> <HeaderStyle CssClass="HeaderStyle" /> <AlternatingRowStyle CssClass="AlternatingRowStyle" />In my C# file I added these lines... using NorthwindTableAdapters; <<<<<this is the problem - where does this come from? protected void Page_Load(object sender, EventArgs e) { ProductsTableAdapter productsAdapter = new ProductsTableAdapter(); GridView1.DataSource = productsAdapter.GetProducts(); GridView1.DataBind(); }Thanks in advance
View 6 Replies View RelatedMy vendor requires data to be sent in Excel format. Some of my tables have rows over 65,536 so I need to use Excel 2007 (Max of 1,048,576). Right now my data sits in SQL 2000. I am using MS SQL Enterprise Manager 8.0 to prepare the data. Is there some kind of add on or selection I am missing to use DTS to export from SQL to Excel 2007?Thanks in advance.
View 3 Replies View RelatedI think I am definitely thrashing and am not getting anywhere on something I think should be pretty simple to accomplish: I need to pull the total amounts for compartments with different products which are under the same manifest and the same document number conditionally based on if the document types are "Starting" or "Ending" but the values come from the "Adjust" records.
So here is the DDL, sample data, and the ideal return rows
CREATE TABLE #InvLogData
(
Id BIGINT, --is actually an identity column
Manifest_Id BIGINT,
Doc_Num BIGINT,
Doc_Type CHAR(1), -- S = Starting, E = Ending, A = Adjust
Compart_Id TINYINT,
[Code] ....
I have tried a combination of the below statements but I keep coming back to not being able to actually grab the correct rows.
SELECT DISTINCT(column X)
FROM #InvLogData
GROUP BY X
HAVING COUNT(DISTINCT X) > 1
One further minor problem: I need to make this a set-based solution. This table grows by a couple hundred thousand rows a week, a co-worker suggested using a <shudder/> cursor to do the work but it would never be performant.
Was wondering if there was a best practice minimum permissions for creating a SQL login to use when setting up a new shared Data source for SSRS report manager?
Something along the lines of them being a data read for the DB and permissions to update tempdb?
Would have thought it not advisable to have the login be able to update the main db...
I need to create a function that replaces the data in a column with an 'X' based on the LEN of the data in the column. I created one that does a replacement, but it fills the column based on the max data length, and not the current length of the string or integer. An example of what I'm trying to accomplish.
Original data in a varchar(30) column:
thisisavalue
thisisanothervalue
thisisanothervalueagain
shortval
replaced with
xxxxxxxxxx
xxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxx
xxxxxxx
My current function is replacing the data like this:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hello all. Before my arrival at my current employer, our consultantsphysically set up our MSSQL 7 server as follows:drive c: contains the mssql enginedrive d: contains the transaction logdrive e: contains the data filesNo filegroups were set up and the data files consist of only 1 largephysical file. Currently, our data file is >10GB. When I was trained onthe physical aspects of sqlserver, I was told to never create physical files[color=blue]> 2048MB each. If I did, I could expect inefficient physical storage of[/color]data and slower performance (due to the OS).Our server has 2 RAID-5 arrays. Drive c: and e: are located on the firstarray and drive d: on the second. We're running Windows 4.0 NT Server SP6with NTFS.Can someone comment on the use of 1 single large data file vs. more smallerdata files?
View 2 Replies View RelatedI am trying to find a reference for a client that lists the fields available to be substituted into a data driven subscription from the query, along with the expected data types.  For example, the field on whether or not to include a link to the report seems to be expecting a bit data type.I have searched and can't seem to find anything.  I guess I could walk through the interface and try different data types, but if  a list exists, that would be better.Â
View 4 Replies View RelatedI'm currently working on a BI architecture for a customer, and consider to propose the Power BI data catalog as a data distribution layer. The customer will use Power BI, but also has other BI tools.
Are data sets in the data catalog available to other clients than Power Query alone? E.g. are there OData feed endpoints available? If not, what would be the best way to give other tools access to the data?
I have 4 Tablix and 2 of the Tablix get data from Server 1 and other 2 get the data from Server 2.I have set NoRowsMessage "=Data Not Available for the Selected Values"  for all the 4 Tablix.Now if data is not available from Server 1 then I must show "Data Not Available for the Selected Values" only once in the  outputbut now its appearing twice in the output because of the 2 tablix that had no rows.Similarly if data not available from Server 2 then it should show "Data Not Available for the Selected Values" only once in my output.If Data not avilable from all the Tablix then also i t should show only once as "Data Not Available for the Selected Values" in the report output.
View 3 Replies View RelatedDoes anyone know of any cross-references between SQL Server data types and the new data types introduced with SQL Server Integration Services?
View 6 Replies View Related