Hi guys. I've got an Xml DataSource in my report server, used to talk to a web service to retrieve it's data. Now, since this is an Xml DataSource that talks to a Web service, i shouldn't have to give it credentials to run with, or - since the web service runs on the machine right next to my report server - I could use Windows Integrated Auth. However ... when I try to use Windows Integrated auth. I get back the error:"This
data source is configured to use Windows integrated security. Windows integrated
security is either disabled for this report server or your report server is
using Trusted Account mode. "And when I tried to use no credentials, before I can even see the report, I get the error:"the user data source credentials that are required to execute this report are
not stored in the report server database." - where I just told it that it doesn't need credentials to run this datasource !!!
I also created these parameters like Server, Database, LoginID, Password in report paramenters
but when I try to run this I am getting either of these errors
error no 1.The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. (rsInvalidDataSourceCredentialSetting)
error no 2.An error has occurred during report processing. Cannot create a connection to data source 'SRVDataSource'. For more information about this error navigate to the report server on the local server machine, or enable remote errors
I'm trying to use stored credentials to enable caching. I've created a special windows user account with minimum permissions for just this task, and once set up, it works great (almost).
I can update the shared data source using SQL Mgt Studio or directly via the Report Manager to use a set of -windows- stored credentials. But I don't seem to be able to do the same via VS.NET 2005. I can only store -SQL- credentials, which I have no need to enable and no desire to add to my surface area.
The problem lies that every time I deploy any report that using that data source (which is nearly all of them), the data source is re-published, which wipes out the stored credentials and caching immediately stops.
I've tried messing with the XML directly, with no luck, and changing assorted advanced settings, but nothing seems to stick.
Obviously I can manually update the credentials each time I deploy something, but surely it seems that there must be a better way. Is there a way to either set the DS to use stored windows credentials, or just plain prevent the deployment of the DS every time a dependent report is published?
I have created reports using in SSRS 2005 and deployed in Reportserver.
when I run the reports I am getting the following error.
" The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. (rsInvalidDataSourceCredentialSetting)
I've been working on an application that uploads an RDL to Reporting Services (through the SOAP webservice method CreateReport) programmatically. I'm having difficulty setting up the data source properties for my uploaded report. In particular the Data Source Credentials property.
The datasource for my report doesn't require credentials. By default after I upload the report to Reporting Services, the Data Source Credentials property is set to "Credentials supplied by the user running the report". How do I go about setting the Data Source Credentials property to "Credentials are not required" programmatically through the webservice?
I have a package that moves Interbase data over to a Sql server. All works fine but I need to supply credentials (windows not db) when connecting to the source. Right now I am creating a share on the source but I want to remove that requirement. What do use for this and where does it go in the process?
I could see the preview of my report without any problem. But when I deploy on a sever and select a parameter I m getting following error €śOne or more data sources is missing credentials€? My report contains single value parameters and a dependence parameter. I think this error occur bcos of that dependence parameter. If I change single value parameter as multivalve parameters it is working fine without any error. And also if I make dependence parameter as my first parameter it is working fine Is it a bug in sp2?????? Or Can v solve this problem???
Hi report data sources keep losing their credentials. We use custom datasources and store credentials on the server yet for some reason? the credentials get removed and have to be re entered.
, Hi In this code how can I create a new data source and new data source view and model and structure that it run dynamic. In this code I have a lot of errors, that they are about server and database don€™t have in current code, In this code, first I should definition server or no?
How can I create data source and data source view and model and structure? Please say code of that, and guide me. databasename and srv is unknown. Do I add other reference with analysis services? Please explain about these codes: ************************************************************************ 1) RelationalDataSource dsNew = new RelationalDataSource( datasourceName, Utils.GetSyntacticallyValidID( datasourceName, typeof(RelationalDataSource)));
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
hi everybody, i want to create data source and data source view for data mining, with using C Sharp. i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully, and have i build data source and data source view, how to do it.?
Today I was making a few reports. When I tested the reports in Visual Studio, they worked great: I got the expected result. But when I deployed the reports to our reportserver the problem started. When I click on the directory in which my reports are deployed, I got my 4 reports. Till now everything worked correct. But when I click on a report to view the results it went wrong. I got an error: "Cannot create a connection to data source 'Live'" (Live is the name of our data source).
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work. I also have tried it with all the roles assigned on my account, but then it still won't work.
When I modify the data source, and set it to another server en database it works. The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server. Maybe that is the problem?
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected. It seems that somehow the 3 columns are not read in from the source file? ans alslo fiscal year, fiscal week is not set up up properly in my data destination? anyone faced such errors before?
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning. Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data. Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0. Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows. Task failed: Load XML Files Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted. Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "Package.dtsx" finished: Failure. The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
I've question about how to handle structural datamodel changes in a datasource of PowerPivot. Suppose I'm developing a starmodel in SQL Server and sometimes a datatype changes or a name of a field changes in a table. It seems to me that PowerPivot handle this not gracefully as Analysis MD does (mostly). I received an error because of a wrong fieldname or even no error when a dattype changes in PowerPivot. Is this common or do I something wrong here. Does this mean that every time the datamodel changes the PowerPivot should be recreated? Or am I missing the clue here?
Was wondering if there was a best practice minimum permissions for creating a SQL login to use when setting up a new shared Data source for SSRS report manager?
Something along the lines of them being a data read for the DB and permissions to update tempdb?
Would have thought it not advisable to have the login be able to update the main db...
I have 4 Tablix and 2 of the Tablix get data from Server 1 and other 2 get the data from Server 2.I have set NoRowsMessage "=Data Not Available for the Selected Values"  for all the 4 Tablix.Now if data is not available from Server 1 then I must show "Data Not Available for the Selected Values" only once in the  outputbut now its appearing twice in the output because of the 2 tablix that had no rows.Similarly if data not available from Server 2 then it should show "Data Not Available for the Selected Values" only once in my output.If Data not avilable from all the Tablix then also i t should show only once as "Data Not Available for the Selected Values" in the report output.
A data reader is using a connection manager to connect to an ODBC System DSN . A query in the SqlCommand property is provided. Data is being truncated in the only string column . The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7.
The truncated output in a text file is the first 3 characters from left to right . Changing the column order has no effect.
A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:
Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader.
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
Hi i am trying to do a straight forward load from a Flatfile source , i have defined the columns according to the lenghts defined in the Data Dictionary Provided but when i am trying to run the Task i am encounterring this error
The column data for column "Column 20" overflowed the disk I/O buffer.
I tried to add another column 21 at the end and truncate or leave that column unmapped to destination but the same problem occurs for column 21 what should i do to over come this .
In case of Bad Data how to clean up the source.. Please help me with this
I've got a report that is using a cube as a data source and I can't get the report to show all the data. Only data at the lowest level of the cube is displayed. The problem is that most of the data I'm concerned with is at higher levels. There's no problem with the MDX. I get the correct results when I run the query.
I'm using a table to show the results. I've also tried a matrix, but I get the same results. I'm using SSRS 2005 and SSAS 2000.
Anyone have experience with this? Am I missing something simple?
I am pretty new to SSIS. I am trying to create a package which can accept data in any of several formats. i.e. CSV, Excel, a SQL Server database/table and import the data into my destination database.
So far i've managed to get this working OK. However I am now TOTALLY stuck. I'm currently trying to just concentrate on the data sources being a CSV (using a Flat File Data Source) and/or an Excel Spreadsheet.
I can get the data in and to my destination using a UNION ALL component and mapping the data sources to it so long as both the CSV file and the Excel spreadsheet exist.
My problem is that I need my package to handle the possibility that only the CSV file might exist and there is no Excel spreadsheet. In which case i'd like the package to ignore the Excel datasource completely. Currently either of my data sources do not exist I get errors and the package terminates.
Is there any way in SSIS that I can check all my data sources to see which ones exist (i.e. are valid). If they exist I want to use them. If it doesn't exist i'd like to disgard it (without error - as long as there is a single datasource the package should run)
I've tried using the AcquireConnection method in a script task on each of my connections, hoping that it would error if the file/datasource did not exist. It doesn't though (in the case of an Excel datasource it just creates a empty excel file for me).
The only other option I can come up with are to have seperate packages depending on the type of data we want to import and then run a particular package depending on the format of the source data. This seems a bit long winded. I am pretty sure I must be able to do what I want to achieve but I can't work out how.
I'll be grateful to anyone who can send me any tips/hints/links on how I can achieve this.
I am new to SSIS programming, so bear with me if my question seems naive to you gurus. I have a situation that needs to set the data source for a data flow from external .NET application ('external' means that the application will run on different process than the SSIS). I am trying to set the data source on which the data flow works from my C# application in a DataSet format. Ideal solution is not to save the DataSet to any file on harddisk (I know that will work, but has the overhead of writing, reading and managing the temp file). What I want to achive is that the business logic of picking data for SSIS Data Flow to process is controlled inside my C# application, the Data Flow just does what it does best - Transformation. Have any of you successfully done this before?. Thanks!
I have a stored procedure that receives an input parameter of ReporID and then sends back the appropriate dataset to the data-driven subscription. In the stored procedure, there is some concatenated sql in producting the final select statement to send to the subscription, but it is generating the following error:
The dataset cannot be generated. An error occurred while connecting to a data source, or the query is not valid for the data source. (rsCannotPrepareQuery) Get Online Help
Insert Error: Column name or number of supplied values does not match table definition. Because there are some optional columns that need to conditionally appear based on the report, I can't avoid concatenation. My only other option is to have hundreds of individual tables to source all our reports, which I don't have time to manage.
Please let me know how I can allow the data-driven subscription setup process to discover the columns for my concatenated SQL so I can seutp my schedules based on the single stored procedure with all my logic nested in my table structure.
I'm new to sql server. Last week I made my first cube. Everything went fine. But when I want to explore the cube (from the explore panel in Visual Studio 2012) in Excel then I'm getting the error "Initialization of the data source failed".
Check your database server or contact your database administrator. Make sure the external database is available, and then try the operation again. If you see this message again, create a new datasource to connect to the database.
I'm using Sql Server 2012. Visual studio 2012. Excel 2013 on Windows 10
