Data Source View Of Mining Structure Cant Be Edited?

Nov 23, 2006

Hi, all here,

Thank you very much for your kind attention.

I got a quite a strange problem with Mining structure for OLAP data source though. The problem is: I am not able to edit the mining structure in the mining structure editor. The whole data source view within the mining structure editor is greyed. Could please anyone here give me any advices for that?

Thank you very much in advance for any help for that.

With best regards,

Yours sincerely,

 

View 5 Replies


ADVERTISEMENT

Data Mining - Scalar Mining Structure Column Data Type Error...

May 31, 2006

Hoping someone will have a solution for this error

Errors in the metadata manager. The data type of the '~CaseDetail ~MG-Fact Voic~6' measure must be the same as its source data type. This is because the aggregate function is not set to count or distinct count.

Is the problem due to the data type of the column used in the mining structure is Long, and the underlying field in the cube has a type of BigInt,or am I barking up the wrong tree?

View 16 Replies View Related

Data Mining :: Content In Data Mining Structure Not Valid - Deployment Fails

Apr 30, 2015

I'm a beginner with SQL 2012 SSDT & SSMS. I get this error message when I try to deploy my project: 

"Error 6
Error (Data mining): KEY SEQUENCE columns are not supported at the case level. The 'Customer Key' column of the 'TK448 Ch09 Cube Clustering' mining structure contains content that is not valid.
0 0
"
I am finding it hard to locate the content that is not valid. I've been trying to find a answer for this problem but can't seem to find anything. How can I locate the content that is not valid and change or delete it so that I can deploy this solution?

View 2 Replies View Related

Can I Filter The Data On Mining Structure, Mining Model?

Jul 18, 2006

I perform data mining on all products and a specific product category.
Do I need to create 2 data source views, one for all products and the other one for the specific product category?
Afterward, I run the Data Mining Wizard 2 times to create 2 mining structures.
I also need to add the same mining model (e.g. Bayes, Cluster) to each of these mining structures.
Is there any simple way to do it?

Thanks.
Joe.

View 3 Replies View Related

SQL Server Admin 2014 :: Structure Of Log Saving (for Data Mining)

May 12, 2015

We saved huge log data from user behaviour in our site .

But In data mining time , we saw that most of them cant use for data mining

What is the best practice about data gathering from user movement in site?

is there any best practice Template for this ?

View 0 Replies View Related

Create Mining Structure And Mining Model With Code

Oct 18, 2006

Dear friends,

I encounter a serious problem.

I would like to develop an application that can create Data Mining structures and a mining model in SQL Server 2005 with VB.NET. I tried the code from book Data Mining with SQL server 2005 in chapter 14 but did not work. Any good idea?

Please help me.



Best regards,

Manolis

View 5 Replies View Related

Create Mining Structure And Mining Model With Code

Oct 20, 2006















Thank you very much for your help.
The errors that I can see in the code that you gave in your answer are the following and they are more or less the same as I had previously

I tried the code but initially I have encounter the following problems.

1. In any line that have the declaration As Server, As Database like in
Public Function CreateDatabase(ByVal srv As Server, ByVal databaseName As String) As Database gives me the problem that type Database is not declared the same type Server is not declared and it does not give me any option.

2. In addition to that for As DataSource, As RelationalDataSource, As RelationalDataSourceView, As ScalarMiningStructureColumn, As DataSourceViewBinding, gives me the problem that type is not declared.

3. Finally in mc = New MiningModelColumn("Yearly income", Utils.GetSyntacticallyValidID("Yearly income", Type.GetType(MiningModelColumn))) is not accesible in this context because it is 'Private'.
I have some more problems but I thing that by solving the above that I referred I will solve the rest.

Thank you any way.
Best regards,
Manolis



PhD student

View 1 Replies View Related

Mining Structure Has To Contain At Least 2 Mining Models To See Their Accuracy Charts?

Nov 27, 2006

Hi ,all here,

Thank you very much for your kind attention.

I just found that I am not able to view the accuracy chart for my mining model. The error message is: no mining models are selected for comparision. Which is quite strange.

Any guidance? thank you very much.

With best regards,

Yours sincerely,

View 5 Replies View Related

Loading Data Using Ole Db Source With Input Source Being A View

Dec 13, 2007

I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.

The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.

Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?

View 13 Replies View Related

Data Flow Source That Will Take A String Variable With Csv Structure?

Dec 21, 2006

I am able to use a custom script task to receive a MSMQ package and save the package contents to a flat file.

I can also use the bulk load task to push the flat file contents into a SQL table.

However, I would like to save the package contents to a variable (done, it works), and then pass that string variable to a data flow task for SQL upload. In other words, I don't see any reason to persist the msmq package contents to disk.

My question is: Which data flow source can I use that will accept a string variable? The string variable will then need to be processed with bulk load or an execute sql task.

Btw, the content of the string variable is a csv style string:

"01001","11/21/2006",15
"01001","11/21/2006",1
"01001","11/21/2006",25
"01001","11/21/2006",3


Thanks,

Trey

View 3 Replies View Related

Amo And Creating Data Source And Data Source View Code

Feb 2, 2008

,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?

Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************

How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));

db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;

dsNew.Update();
2)

RelationalDataSourceView rdsv;

rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));

rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);

DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);

*************************************************************
4)

// Make sure we have the name we thought

dss.Tables[0].TableName = tableName;

// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();


5)

MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";

Add columns:
ScalarMiningStructureColumn smsc;

// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);

*******************************************
6)

MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));


mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);


MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);


mm.Update();

Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.

View 1 Replies View Related

Data Mining :: Check DB Diagram At Source Database

May 18, 2015

What do you use to check the data structure at a source database? For instance, i've got a database which i can connect to using the ODBC (ado.net) connection in SSIS. To get a better understanding on the data and the relationships in the tables i would like to get a database diagram (ERD) of the source DB. Also i would like to be able to import this diagram into SQL server in the database diagram section when i'm going to load this data into a DWH. Any tips or free tools on better understanding the structure of an external source DB?

View 3 Replies View Related

SQL 2012 :: SSIS - Updating Source And Target Data Structure

Feb 17, 2015

I have a SSIS package that simply moves data from a SQL database A to another SQL database B. I have update (increased) the size of a nvarchar column, on both A and B.I am wondering if there is a way to "refresh" somehow the SSIS package so I don't have to rebuild and redeploy it.The error I get now is a truncation error: "Text was truncated or one or more characters had no match in the target code page".

View 2 Replies View Related

Using Cube Views As A Data Source To Build Mining Model

Nov 16, 2006

Hi all,

I am new to SQL Server 2005 Analysis Services and would like to use the OLAP Cubes as a datasource to build Mining Model . However i would like to use a particular view of the OLAP cube that i have generated to be used as the datasource for the mining model . I find that i am not able to save the Cube View while browsing the OLAP cube in Business Intelligence Studio. Is there a way i can acheive this requirement.

Any ideas regarding this will be really appreciated.

Thanks & Regards,

Satya

View 6 Replies View Related

Where Can I Store The Mining Results From Mining Models In SQL Server 2005 Data Mining Engine?

Apr 26, 2006

Hi, all here,

I am wondering where can I store my mining results in data mining engine? For example, I got mining results like accuracy chart, decision trees, and other formats of results based on different mining algorithms I used for my data mining, so where can I actually store the results for reporting service use later? Is it possible to do that in SQL Server 2005?

Thanks a lot for any help and guidance in advance.

View 4 Replies View Related

How To Prevent System Administrator To View And Edit A Database Structure And Data

Dec 26, 2007

I represent a software development house and we have developed a client server system based on SQL Server. Most of our customers have already purchased Enterprise License of SQL Server, therefore they own the SA Login and Password. We are bound to attach our Database with their Server on their machine.

My question is how can we stop a System Administrator of SQL Server to view our Database Structure, Queries, Data installed on their SQL Server on their machine.

Our database structure is a trade secret and we cant reveal the structure to the client.

please answer this question by email to me at farhandotcom@gmail.com

Thanks & Regards
Farhan

View 1 Replies View Related

Is The Operation CREATE MINING STRUCTURE And CREATE MINING MODEL Really Useful?

Aug 17, 2006

Hi,

I've tried those two operations in the Management Studio.
Though we can create a mining structure and mining model in Management Studion,
but we cannot process the analysis-service database.

(1) I create only a mining structure through CREATE MINING STRUCTURE.
No error reported. But if I process the analysis-service database in Management Studio I always get error

'Error : The '<mining_structure__name>' structure does not contain bindings to data
(or contain bindings that are not valid) and cannot be processed.

I then tried to create it by creating and running an XMLA script. It was successful.
However, it's much harder to learn XMLA.

If any of you created an analysis-service database in Mgt Studio, and create a mining
structure in the same place using DMX script, can you process the database?

(2) Is there any use of CREATE MINING STRUCTURE operation without binding
to any table? Examples I saw so far did not show relating it to do. In my experience
processing the analysis-service database with that mining structure is doomed to fail.

(3) Is there any way we can create mining structure through CREATE MINING

STRUCTURE operation in Management Studio and use RELATED TO clause

to bind it to any Relationship to an attribute column (mandatory only if it applies), indicated by
the RELATED TO clause

(4) If this is the fact, is there any use of CREATE MINING STRUCTURE operation?
If we use BI Dev Studio, it's much easier to use the wizard.

(5) I found I cannot create a mining model inside a mining structure through operation
CREATE MINING MODEL. If you call that operation, you end up having a mining
model and a mining structure with the same name. I found that in order to create a
mining model inside a mining structure you have to call operation ALTER MINING
STRUCTURE ADD MINING MODEL. Is it true this is the only way?

Thank you,

Bernaridho

View 3 Replies View Related

Create Data Source, Data Source View From XML?

May 8, 2007

hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?

thanks for you helps

View 1 Replies View Related

Why Mining Structure Can Only Use One Dimension From A Cube?

Sep 11, 2006

Hi,

I am working with several tables, but for now I just mention 4 : one is fact table (named Usage), and 3 dimensional tables Periods, Products, and Regions. The fact table contains references to the dimensional tables. Table Periods contain two other columns month and year.

I created a cube containing columns from those 4 tables. Deployment was successful. Trouble comes when I want to create a mining structure using Time Series containing these columns :

- Period
- Amount (of money)
- Product name
- Region name

When I choose to use cube (instead of table) as source for mining structure, I'm forced to choose only one dimension (among the Periods, Products, and Regions). Whatever dimension I choose I end up being unable to use the column period as the Time-Key column. Effectively I cannot use Time Series method since I cannot use the column period.

(1) Why is this so [why Visual Studio forced us to use only one dimension from the cube] ?
(2) Why Visual Studio eliminates the column period, column that has relationship with the
time dimension?
(3) What is the use of Cube anyway to the mining? Is there still any use for it?
(4) What is the solution to that kind of problem I face?

Thank you,

Bernaridho

View 6 Replies View Related

The Attribute Key Cannot Be Found When Trying To Process Mining Structure

Oct 29, 2007

Hi,

I know, this is a common OLAP Error, but In fact I'm having trouble with this while trying to process a DM Mining Structure.
I'm currently working on a website that gets data from its users and analyzes it using SSAS. The thing is each time we add a new "analysis criterium" (sorry I'm trying to translate our french BI language in English...), we have to build a new mining structure, which needs data about users who have actually answered the question associated with this criterium. Some times, there are thousands, and some other only dozens, which is the case for the structure I'm having trouble with.

I got only 2 hundred tuples in the learning set. So lots of the common criteria weren't filled: I removed them using a stored procedure before feeding the structure, so that I got no column with only "null" values.

Of course, I know that 200 learning cases is really not enough to build an accurate model, but the purpose was just a proof of concept for machine driven Mining Structure building, and that was supposed to work even with so few cases.
When I process the MS, it fires: (Sorry it's in french, translation follows)
Erreurs dans le moteur de stockage OLAP : La clĂ© d'attribut est introuvable : Table : _x0032_0_EtudeIphone_Apprentissage, Colonne : EtudeIphone, Valeur : le nouvel iPhone (tĂ©lĂ©phone tactile et musical d€™Apple). Erreurs dans le moteur de stockage OLAP : La clĂ© d'attribut a Ă©tĂ© convertie en un membre inconnu parce que cette dernière est introuvable. Attribut Id de la dimension : 20_EtudeIPhone ~MC-Id de la base de donnĂ©es : ClassificationVDCE, Enregistrement : 2.


Badly translated it says "Errors in OLAP Storage Engine: Attribute Key not found Table:<StrangeTable> Column <MyPredictableColumn> Value <OneOfTheInterestingValues>
Errors in OLAP Storage Engine: Attribute key not found: converted to an unknown member. Attribute Id from dimension..."

Why? Too few cases? I have structures based on the same template but associated with other criteria and they work perfectly.

I'm ready to answer any question, and give any detail.
Thanks in advance.

François JEHL
IT Consultant
Winwise - Paris




PS: Of course, my "Id' column is unique....

View 1 Replies View Related

Can We Define Multiple Key Columns For A Mining Structure?

Jul 10, 2007

Hi, all,

Just found that we are not able to define multiple key columns for a mining structure in SQL Server 2005 Data Mining engine, just wondering is there other way to define multiple key columns for a mining structure there? As in many cases, the table we are mining are with composite key consisting of different foriengn keys, e.g. A fact table are with transaction information and other foreign keys. If I am not able to define these composite key here for this fact table, I will have to have a named calculation in data source view to have a key column which is based on these original composite keys? Is this a better way to solve this problem or there is any other alternatives to figure it out?

Hope my question is clear for your help and I am looking forward to heaing from you shortly for your kind advices and help and thanks a lot in advance.

With best regards,

Yours sincerely,



View 6 Replies View Related

Mining Structure Processing Event Notification

Feb 21, 2007

Hello,

Can anyone spot what i am missing here ? The problem is that i am getting a null object for e.TextData in the t_OnEvent(object sender, TraceEventArgs e) function below. I am trying to get event- notifications while processing the data mining structure.

thanks

anil

//-------------code below-------------------------------------

using Microsoft.AnalysisServices;

private void ProcessMiningStructure(MiningStructure mStruct)
{
Trace t;
TraceEvent e;

t = server.Traces.Add();
e = t.Events.Add(TraceEventClass.ProgressReportCurrent);
e.Columns.Add(TraceColumn.TextData);

t.OnEvent += new TraceEventHandler(t_OnEvent);
t.Update();
try
{
t.Start();
mStruct.Process(ProcessType.ProcessFull);
t.Stop();
}
catch (Exception ex)
{

}
t.Drop();

}
//------------------------------------------------------


void t_OnEvent(object sender, TraceEventArgs e)
{
SetText(e.TextData);
}

//------------------------------------------------------







View 4 Replies View Related

Data Mining :: Informational (Data Mining) - Decision Trees Found No Splits For Model

Sep 29, 2015

I followed the tutorial posted at [URL] ...

Everything was ok until the last step where I had to process the mining structure which resulted in a warning

"Informational (Data mining): Decision Trees found no splits for model, Tbl Decision Tree Example."

What does this error mean? How do I resolve it? Also, I only see the first level in the Mining Model Viewer, I don't see the levels 2 and 3.

View 2 Replies View Related

DMX Export Command On OLAP Based Mining Structure

Mar 13, 2008

Hi,

I've tried to use the export command to export a mining model from management studio, but it returns that
export statement is not supported for OLAP mining structures, Ive checked the EXPORT(DMX) reference I can't see any note that it is not applicable on OLAP structures.

Can anyone confirm this?


-Rgds,
Sheryaar

View 3 Replies View Related

I Have Created The Cubes And Dimension And Mining Structure - How To Do Reporting

May 16, 2007

Created:

Cubes

Dimension

Role

Mining Structure

From Analysis Services, how do I now use reporting services to show the Data?

View 7 Replies View Related

How Can We Compare Other Data Mining Software Packages With SQL Server 2005 Data Mining?

Feb 23, 2007

Hi, all experts here,

I would like to know if there is any way to migrate third-party data mining packages with SQL Server 2005 data mining algorithms together then we can have a comparison among all of them to get the best results for training models.

I am looking forward to hearing from you.

Thanks a lot.

With best regards,

Yours sincerely,

View 1 Replies View Related

Data Mining :: MS Excel Data Mining Add-ins / Maximum Number Of Predict Columns

Jun 4, 2015

Having successfully created :

- a data mining structure with about 80 columns.
- a data mining model using Microsoft_Decision_Trees with 2 prediction columns. 

I thought I would then explore the possibility of have more than 2 prediction columns, in this case 20.

I get an error message and I can't work out :
a) if this is because there's a limit to the maximum number of prediction columns and where that maximum is stated.
b) if something else has become corrupted
c) there's a know bug and if the error message is either meaningful or not.

Either way, I'm unable to complete the data mining wizard 

The error message is :Errors in the metadata manager. Either the mining structure with the ID of '[my model Structure]' does not exist in the database with the ID of 'DMAddinsDB', or the user does not have permissions to access the object.

View 3 Replies View Related

Strange Behaviour Of Data Source View

May 29, 2008



I have a fact table which is a custim query in the data source view, I process and work with the data, after somewhile I make some changes in the data source view query but all my changes does not reflect in the cube after processing the same old data returned.

please help ASAP, I want to fix this issue

View 12 Replies View Related

Can You Use A Stored Procedure In A Data Source View?

Aug 2, 2007

Is it possible to use a stored procedure in a Data Source View? When I use the wizard to create the Datasource View, all it lets me choose is tables and views in the database. Am I missing something, or trying to do something that is impossible?

View 8 Replies View Related

Report Models Data Source View

Apr 30, 2007

How does the report model know what data source view to use? I could not find it defined anywhere in the .smdl file.



My problem is this. I have a Report Model project with two data sources, two data source views and multiple report models. When I try and bind a data source to an entity in the report model I do not get to choose which data source view to use to choose what table/view I want to bind the entity too and only the tables in one of my DSV's shows up. When I first created it, it worked fine. It automatically selected the correct view and table and was successfully created but now when I open the project, that correlation is lost.



Any suggestions or help is appreciated, thanks.

View 1 Replies View Related

Data Source View Missing Fields

May 9, 2008

Is there a limit on the number of fields that can be displayed in a table object in a data source view in SSAS 05?
One of the tables (the fact table) in my data source view is displaying only 50 fields. The table actually has many more than that. One of the fields that is not displaying is a foreign key that I need to link to a new dimension table. I have tried refreshing the view, but it doesn't bring in any additional fields.



View 10 Replies View Related

Stored Procedures Not Possible As Data Source View?

Apr 3, 2007

only the tables and views are shown in the wizard (BIDS) thanks...

View 1 Replies View Related

Dynamic PIVOT Table As Data Source View

May 29, 2008

I would like to use a dynamic pivot table in my data source view. It seems that a named query can be only one sql statement. So, I cannot use my multi-statement procedure that creates a dynamic pivot table output.

What is the best course of action here? I could hard-code my pivot table query. I could maintain a redundant table in the pivot format. Do I have any good options?

KenS


Ken

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved